Frattura ed Integrità Strutturale - v. 14, n. 53 (juin 2020)

Publié:	juin 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Monetto, Ilaria / Massabó, Roberta	An analytical beam model for the evaluation of crack tip root rotations and displacements in orthotropic specimens	372-393
Kostina, Anastasiya / Zelnin, Maxim / Plekhov, Oleg / Panteleev, Ivan / Levin, Lev / Semin, Michail	An Applicability of Vyalov’s equations to ice wall strength estimation	394-405
Chatzigeorgiou, Antonios / Theotokoglou, Efstathios / Tsamasphyros, George I.	Code development for the computational analysis of crack propagation in structures	306-324
Abdelmadjid, Moulgada / El Sallah, Zagane Mohammed / Abderahmane, Sahli / Djafar, Ait Kaci / Rachid, Zahi	Comparative study of the repair of cracked plates with two different composite patches	187-201
Reis, Paulo N. B. / Amaro, Ana / Loureiro, Altino	Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints	124-133
Li, Zheng / Guo, Deping / Berto, Filippo	A coupled elastoplastic damage model for brittle rocks: elastoplastic damage model for brittle rocks	446-456
Kaddour, Sadek / Aour, Benaoumeur / Salah Bennouna, Mohammed / Talha, Abderrahim / Bouiadjra, Belabbes Bachir / Bouanani, Morad Fari	The Effect of corrosion on the quality repair of the aluminum alloy A 5083 H11 by bonded composites	51-65
Reda, Ramy Mostafa / Omar, Zeinab / Sallam, Hossam / Ahmad, Seleem S. E.	Effect of different parameters controlling the flexural behavior of RC beams strengthened with NSM using nonlinear finite element analysis	106-123
Navarro Pintado, Carlos / Vázquez, Jesús / Domínguez, Jaime / Periñán, Antonio / Herrera García, Marta / Lasagni, Fernando / Bernarding, Simon / Slawik, Sebastian / Mücklich, Frank / Boby, Francisco / Hackel, Lloyd	Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy	337-344
Ameri, Mahmoud / Mohammadi, Reza / Mousavinezhad, Milad / Ameri, Amirhossein / Shaker, Hamid / Fasihpour, Arash	Evaluating Properties of Asphalt Mixtures Containing polymers of Styrene Butadiene Rubber (SBR) and recycled Polyethylene Terephthalate (rPET) against Failures Caused by Rutting, Moisture and Fatigue	177-186
Kaddouri, Afaf / Serier, Boualem / Kaddouri, Khacem / Belhouari, Mohamed	Experimental Analysis of the Physical Degradation of Polymers – The Case of Polymethyl Methacrylate	66-80
Zhang, Jianwei / Berto, Filippo	Experimental and analytical investigation on the coupled elastoplastic damage model of coal-rock: The investigation on damage model of coal-rock	434-445
Rezaei, Sajad / Damadi, Seyed Mohsen / Edrisi, Ali / Fakhri, Mansour / Khordehbinan, Mohammad Worya	Fatigue Analysis of Bitumen Modified with Composite of Nano-SiO2 and Styrene Butadiene Styrene Polymer	202-209
Liu, Jingna / Ma, Wenpeng	Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting	141-151
Farida, Bouafia / Hadid, Lamia / Boualem, Serier / Sikandar, Sardar	Finite element analysis of the interface defect in ceramic-metal assemblies: Alumina-Silver	1-12
Namdar, Abdoullah	Forecasting bearing capacity of the mixed soil using artificial neural networking	285-294
Desai, Abilash / Sharanaprabhu, C. M. / Kudari, S. K.	Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using FPB specimen	426-433
Gryguc, Andrew / Shaha, Sugrib Kumar / Behravesh, Seyed Behzad / Jahed, Hamid / Wells, Mary / Williams, Bruce	Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging	152-165
Strungar, Elena / Wildemann, Valery	Inelastic deformation and destruction of fiber-laminated polymer composites in stress concentration zones	406-416
Rizov, Victor / Altenbach, Holm	Longitudinal fracture analysis of inhomogeneous beams with continuously varying sizes of the cross-section along the beam length	38-50
Wang, Zhiqiang / Huang, Xiaoguang	Low cycle fatigue damage model and sensitivity analysis of fatigue crack initiation by finite element approach	81-91
Harbaoui, Rym / Daghfas, Olfa / Znaidi, Amna / Tuninetti, Victor	Mechanical behavior of materials with a compact hexagonal structure obtained by an advanced identification strategy of HCP material, AZ31B-H24	295-305
Saadallah, Younès	Modeling of mechanical behavior of cork in compression	417-425
Wang, Dongye / Dong, Yuli / Zhang, Dashan / Wang, Weihua / Lu, Xin	Monitoring and analysis of reinforced concrete plate-column structure under room temperature and fire based on acoustic emission	236-251
Lu, Yao	A new approach of CMT seam welding deformation forecasting based on GA-BPNN	325-336
Fathi, Pourya / Oskouei, Alireza Naddaf / Vahedi, Khodadad / Petrudi, Amin Moslemi	Numerical and Experimental Analysis of Stacking Sequences Effects in Composite Mechanical Joints under Impact Loadings	457-473
Akbari, Jalal / Salami, Omid / Isari, Mohsen	Numerical Investigation of the Seismic Behavior of Unanchored Steel Tanks with an emphasis on the Uplift Phenomenon	92-105
Nurullaev, E. / Lyubimova, N. Y. / Gertsen, T. A.	Physical Parameters of Polymer Composite Materials Created on the Basis of Low and High Molecular Weight Rubbers	134-140
Zakharov, Alexander / Shlyannikov, Valery / Tartygasheva, Anastasia	Plastic stress intensity factor behavior at small and large scale yielding	223-235
Kirin, Snežana / Jeremić, Lazar / Sedmak, Aleksandar / Martić, Igor / Sedmak, Simon / Vučetić, Ivana / Golubovic, Tamara	Risk based analysis of RHPP penstock structural integrity	345-352
Oliveira, Mateus / Teles, Daniel / Amorim, David	Shear behaviour of reinforced concrete beams under impact loads by the lumped damage framework	13-25
Yarullin, Rustam / Shlyannikov, V. N. / Ishtyriakov, I. S. / Yakovlev, M. M.	Stress intensity factors for mixed-mode crack growth in imitation models under biaxial loading	210-222
Fawzy, Hesham / Mustafa, Suzan / El-Badie, Ahmed Abd	Thermal Effect on Bond Strength of Rubberized Concrete Filled Steel Tubular Sections	353-371
Ferro, Paolo / Berto, Filippo / Romanin, Luca	Understanding powder bed fusion additive manufacturing phenomena via numerical simulation	252-284
Pankaj, Jaiswal / Kumar, Rahul Iyer / De Waele, Wim	Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints	26-37
Parodo, Gianluca / Giuliano, Gillo / Sorrentino, Luca	Uniformity of thickness of metal sheets by patchwork blanks: potential of adhesive bonding	166-176

Informations
sur cette fiche
IssueID
37981
Publié(e) le:
23.10.2020
Modifié(e) le:
23.10.2020

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Frattura ed Integrità Strutturale - v. 14, n. 53 (juin 2020)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Frattura ed Integrità Strutturale - v. 14, n. 53 (juin 2020)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.