Engineering Structures - August 2021

Published:	August 2021

Articles in this Issue

Author(s)	Title	Page(s)
Shams-Hakimi, Poja / Carlsson, Fredrik / Al-Emrani, Mohammad / Al-Karawi, Hassan	Assessment of in-service stresses in steel bridges for high-frequency mechanical impact applications	112498
Montenegro, P. A. / Carvalho, H. / Ribeiro, D. / Calçada, R. / Tokunaga, M. / Tanabe, M. / Zhai, W. M.	Assessment of train running safety on bridges: A literature review	112425
Lyu, Wan-Qing / Han, Lin-Hai / Hou, Chao	Axial compressive behaviour and design calculations on recycled aggregate concrete-filled steel tubular (RAC-FST) stub columns	112452
Razavi, Mohammad / Mostofinejad, Davood / Eftekhar, Mohammadreza	Behavior of RC columns and those strengthened with FRP composite under an innovative reversing cyclic eccentric axial loading	112438
Cai, Yancheng / Kwan, Albert K. H.	Behaviour and design of cold-formed austenitic stainless steel circular tubes infilled with seawater sea-sand concrete	112435
Vy, Son Tung / Mahendran, Mahen	Behaviour and design of slender built-up nested cold-formed steel compression members	112446
Singhal, Shubham / Chourasia, Ajay / Kajale, Yogesh / Singh, Dirgha	Behaviour of precast reinforced concrete structural wall systems subjected to in-plane lateral loading	112474
Al-Fakher, Usama / Manalo, Allan / Ferdous, Wahid / Aravinthan, Thiru / Zhuge, Yan / Bai, Yu / Edoo, Azam	Bending behaviour of precast concrete slab with externally flanged hollow FRP tubes	112433
Yurrita, Miguel / Cabrero, Jose Manuel / Moreno-Zapata, Ezequiel	Brittle failure in the parallel-to-grain direction of timber connections with small diameter dowel-type fasteners: A new design model for plug shear	112450
Wang, Jin / Cao, Shuyang	Characteristics of tornado wind loads and examinations of tornado wind load provisions in ASCE 7–16	112451
de Menezes, Eduardo A. W. / Marczak, Rogério J.	Comparative analysis of different approaches for computing axial, torsional and bending stiffnesses of cables and wire ropes	112487
Xu, Lihui / Ma, Meng / Li, Linfeng / Xiong, Yilei / Liu, Weifeng	Continuum-based approach for modelling the flexural behaviour of plain concrete beam under high-cycle fatigue loads	112442
Ferradi, Mohammed-Khalil / Cespedes, Xavier	A curved beam model with the asymptotic expansion method	112494
Ma, Hui / Jia, Chenjun / Xi, Jiacheng / Dong, Jing / Zhang, Xicheng / Zhao, Yanli	Cyclic loading test and nonlinear analysis on composite frame consisting of steel reinforced recycled concrete columns and steel beams	112480
Iyama, Jun / Fukushima, Yoshihiro / Hasegawa, Takashi / Nakagawa, Hiroto / Kaneshiro, Yosuke	Detection of beam-end fractures in steel members based on local stiffness calculated by strain response	112419
Nobahar, Elnaz / Asgarian, Behrouz / Mercan, Oya	Development and experimental investigation of a post-tensioned self-centering yielding brace system	112440
Jiang, Fei / Ding, Youliang / Song, Yongsheng / Geng, Fangfang / Wang, Zhiwen	Digital Twin-driven framework for fatigue life prediction of steel bridges using a probabilistic multiscale model: Application to segmental orthotropic steel deck specimen	112461
Wakashima, Yoshiaki / Ishikawa, Koichiro / Shimizu, Hidemaru / Kitamori, Akihisa / Matsubara, Doppo / Tesfamariam, Solomon	Dynamic and long-term performance of wood friction connectors for timber shear walls	112351
Lyu, Yi-Fan / Li, Guo-Qiang / Wang, Yan-Bo / Li, Heng / Wang, Yuan-Zuo	Effect of bolt pre-tension on the bearing behavior of high strength steel connections	112491
Li, Ye / Chen, Hui / Yi, Wei-Jian / Peng, Fei / Li, Zhe / Zhou, Yun	Effect of member depth and concrete strength on shear strength of RC deep beams without transverse reinforcement	112427
Yuan, Cheng / Chen, Wensu / Pham, Thong M. / Hao, Hong / Chen, Li / Wang, Jun	Experimental and analytical study of flexural behaviour of BFRP sheets strengthened RC beams with new epoxy anchors	112441
Al-Abdwais, Ahmed H. / Al-Mahaidi, Riadh S.	Experimental and finite element analysis of flexural performance of RC beams retrofitted using near-surface mounted with CFRP composites and cement adhesive	112429
Kheyroddin, Ali / Rouhi, Sina / Dabiri, Hamed	An experimental study on the influence of incorporating lap or forging (GPW) splices on the cyclic performance of RC columns	112434
Xu, Chen / Xiao, Han / Zhang, Boyu / Fu, Jing / Masuya, Hiroshi	Fatigue behavior of steel fiber reinforced concrete composite girder under high cycle negative bending action	112432
Wang, Z. Y. / Zhou, X. F. / Liu, Z. F. / Wang, Q. Y.	Fatigue behaviour of composite girders with concrete-filled tubular flanges and corrugated webs—experimental study	112416
Liu, Tianhao / Huang, Fanglin / Wen, Weibin / He, Xuhui / Duan, Shengyu / Fang, Daining	Further insights of a composite implicit time integration scheme and its performance on linear seismic response analysis	112490
Kizilarslan, Emre / Bruneau, Michel	Hysteretic behavior of repaired C-shaped concrete filled-composite plate shear walls (C-PSW/CF)	112410
Selim, B. A. / Liu, Zishun	Impact analysis of functionally-graded graphene nanoplatelets-reinforced composite plates laying on Winkler-Pasternak elastic foundations applying a meshless approach	112453
Shao, Yi / Billington, Sarah L.	Impact of cyclic loading on longitudinally-reinforced UHPC flexural members with different fiber volumes and reinforcing ratios	112454
Stierschneider, Elisabeth / Tamparopoulos, Alexios E. / McBride, Kenton E. / Bergmeister, Konrad	Influencing factors on creep displacement assessment of bonded fasteners in concrete	112448
Pirchio, David / Walsh, Kevin Q. / Kerr, Elizabeth / Giongo, Ivan / Giaretton, Marta / Weldon, Brad D. / Ciocci, Luca / Sorrentino, Luigi	Integrated framework to structurally model unreinforced masonry Italian medieval churches from photogrammetry to finite element model analysis through heritage building information modeling	112439
Terzic, Vesna / Villanueva, Peny K.	Method for probabilistic evaluation of post-earthquake functionality of building systems	112370
Langlade, T. / Bertrand, D. / Grange, S. / Candia, G. / de la Llera, J. C.	Modelling of earthquake-induced pounding between adjacent structures with a non-smooth contact dynamics method	112426
Sen, Debarshi / Long, James / Sun, Hao / Campman, Xander / Büyüköztürk, Oral	Multi-component deconvolution interferometry for data-driven prediction of seismic structural response	112405
Wilson, Peter / Teschemacher, Tobias / Bucher, Philipp / Wüchner, Roland	Non-conforming FEM-FEM coupling approaches and their application to dynamic structural analysis	112342
White, R. E. / Macdonald, J. H. G. / Alexander, N. A.	A nonlinear frequency-dependent spring-mass model for estimating loading caused by rhythmic human jumping	112229
Vollmer, M. / Bauer, A. / Frenck, J.-M. / Krooß, P. / Wetzel, A. / Middendorf, B. / Fehling, E. / Niendorf, T.	Novel prestressing applications in civil engineering structures enabled by Fe Mn Al Ni shape memory alloys	112430
Chen, Man-Tai / Young, Ben	Numerical analysis and design of cold-formed steel elliptical hollow sections under combined compression and bending	112417
Kadhim, Majid M. A. / Saleh, Abdul Ridah / Cunningham, Lee S. / Semendary, Ali A.	Numerical investigation of non-shear-reinforced UHPC hybrid flat slabs subject to punching shear	112444
Tran, Duong T. / Pham, Thong M. / Hao, Hong / Chen, Wensu	Numerical study on bending response of precast segmental concrete beams externally prestressed with FRP tendons	112423
Vigneri, Valentino / Odenbreit, Christoph / Romero, Alfredo	Numerical study on design rules for minimum degree of shear connection in propped steel–concrete composite beams	112466
Korus, Kamil / Salamak, Marek / Jasiński, Marcin	Optimization of geometric parameters of arch bridges using visual programming FEM components and genetic algorithm	112465
Jin, Chungkuk / Chung, Woo Chul / Kwon, Do-Soo / Kim, MooHyun	Optimization of tuned mass damper for seismic control of submerged floating tunnel	112460
Trabucchi, Ivan / Tiberti, Giuseppe / Plizzari, Giovanni A.	A parametric numerical study on the behavior of large precast tunnel segments during TBM thrust phase	112253
Papasotiriou, Alexios / Athanatopoulou, Asimina / Kostinakis, Konstantinos	Parametric study of the masonry infills’ effect on the seismic performance of R/C frames based on the use of different damage measures	112326
Wang, Zhen / Pan, Wei / Zhang, Yang	Parametric study on module wall-core system of concrete modular high-rises considering the influence of vertical inter-module connections	112436
Derkowski, Wit / Surma, Mateusz	Prestressed hollow core slabs for topped slim floors – Theory and research of the shear capacity	112464
Fang, Cheng / Ping, Yiwei / Zheng, Yue / Chen, Yiyi	Probabilistic economic seismic loss estimation of steel braced frames incorporating emerging self-centering technologies	112486
El Hajj Diab, Mohammad / Orcesi, Andre / Desprez, Cédric / Bleyer, Jeremy	A progressive collapse modelling strategy coupling the yield design theory with non-linear analysis	111832
Zhang, Guangda / Han, Qiang / Xu, Kun / Du, Xiuli / He, Weili	Quasi-static tests of CFST embedded RC column-to-precast cap beam with socket connection	112443
Glatz, Bernhard / Fink, Josef	A redesigned approach to the additional damping method in the dynamic analysis of simply supported railway bridges	112415
Peng, Rong-xin / Qiu, Wen-Liang	Research on freeze-thaw damage to RC column based on incompatibility deformation from pores	112462
Pang, Yutao / He, Wei / Zhong, Jian	Risk-based design and optimization of shape memory alloy restrained sliding bearings for highway bridges under near-fault ground motions	112421
Qissab Al-Janabi, Musab Aied / Yang, T. Y.	Seismic performance assessment of novel self-centering friction-based eccentrically braced frames	112456
Shoushtari, Elmira / Saiidi, M. Saiid / Itani, Ahmad / Moustafa, Mohamed A.	Seismic performance of a two-span steel girder bridge with ABC connections	112502
Arroyo, Orlando / Feliciano, Dirsa / Carrillo, Julian / Hube, Matías A.	Seismic performance of mid-rise thin concrete wall buildings lightly reinforced with deformed bars or welded wire mesh	112455
Yan, Yuhong / Liang, Hongjun / Lu, Yiyan / Zhao, Xiaobo	Slender CFST columns strengthened with textile-reinforced engineered cementitious composites under axial compression	112483
Urbański, Aleksander / Richter, Mateusz	Stability analysis of heavy machinery moving on weak subsoil. Analytical solution	112152
Feng, Zheng / Li, Chuanxi / He, Jun / Ke, Lu / Lei, Zhijie / Vasdravellis, George	Static and fatigue test on lightweight UHPC-OSD composite bridge deck system subjected to hogging moment	112459
Kang, Won-Hee / Tao, Zhong	Statistical data expansion using Kriging for probabilistic capacity factor calibration	112428
Mai, Anh Duc / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Strain model for discretely FRP confined concrete based on energy balance principle	112489
Schranz, Bernhard / Michels, Julien / Czaderski, Christoph / Motavalli, Masoud / Vogel, Thomas / Shahverdi, Moslem	Strengthening and prestressing of bridge decks with ribbed iron-based shape memory alloy bars	112467
Zhang, Chong / Tao, Mu-Xuan	Strong-column–weak-beam criterion for reinforced concrete frames subjected to biaxial seismic excitation	112481
Pizarro, Pablo N. / Massone, Leonardo M.	Structural design of reinforced concrete buildings based on deep neural networks	112377
Spasojevic, Marko / Daneshvar, Hossein / Niederwestberg, Jan / Chen, Yuxiang / Chui, Ying Hei / Gong, Meng	Structural performance of light wood shear walls built with insulated sheathing panels	112449
Jahangiri, V. / Sun, C. / Kong, F.	Study on a 3D pounding pendulum TMD for mitigating bi-directional vibration of offshore wind turbines	112383
Yun, Chen / Chao, Chen / Cong, Chen	Study on seismic performance of prefabricated self-centering beam to column rotation friction energy dissipation connection	112136
Zhong, Yukai / Sun, Yao / Tan, Kang Hai / Zhao, Ou	Testing, modelling and design of high strength concrete-filled high strength steel tube (HCFHST) stub columns under combined compression and bending	112334
Calotescu, Ileana / Torre, Stefano / Freda, Andrea / Solari, Giovanni	Wind tunnel testing of telecommunication lattice towers equipped with ancillaries	112526

About this
data sheet
IssueID
58587
Published on:
15/05/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - August 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - August 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.