Engineering Structures - août 2021

Publié:	août 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Shams-Hakimi, Poja / Carlsson, Fredrik / Al-Emrani, Mohammad / Al-Karawi, Hassan	Assessment of in-service stresses in steel bridges for high-frequency mechanical impact applications	112498
Montenegro, P. A. / Carvalho, H. / Ribeiro, D. / Calçada, R. / Tokunaga, M. / Tanabe, M. / Zhai, W. M.	Assessment of train running safety on bridges: A literature review	112425
Lyu, Wan-Qing / Han, Lin-Hai / Hou, Chao	Axial compressive behaviour and design calculations on recycled aggregate concrete-filled steel tubular (RAC-FST) stub columns	112452
Razavi, Mohammad / Mostofinejad, Davood / Eftekhar, Mohammadreza	Behavior of RC columns and those strengthened with FRP composite under an innovative reversing cyclic eccentric axial loading	112438
Cai, Yancheng / Kwan, Albert K. H.	Behaviour and design of cold-formed austenitic stainless steel circular tubes infilled with seawater sea-sand concrete	112435
Vy, Son Tung / Mahendran, Mahen	Behaviour and design of slender built-up nested cold-formed steel compression members	112446
Singhal, Shubham / Chourasia, Ajay / Kajale, Yogesh / Singh, Dirgha	Behaviour of precast reinforced concrete structural wall systems subjected to in-plane lateral loading	112474
Al-Fakher, Usama / Manalo, Allan / Ferdous, Wahid / Aravinthan, Thiru / Zhuge, Yan / Bai, Yu / Edoo, Azam	Bending behaviour of precast concrete slab with externally flanged hollow FRP tubes	112433
Yurrita, Miguel / Cabrero, Jose Manuel / Moreno-Zapata, Ezequiel	Brittle failure in the parallel-to-grain direction of timber connections with small diameter dowel-type fasteners: A new design model for plug shear	112450
Wang, Jin / Cao, Shuyang	Characteristics of tornado wind loads and examinations of tornado wind load provisions in ASCE 7–16	112451
de Menezes, Eduardo A. W. / Marczak, Rogério J.	Comparative analysis of different approaches for computing axial, torsional and bending stiffnesses of cables and wire ropes	112487
Xu, Lihui / Ma, Meng / Li, Linfeng / Xiong, Yilei / Liu, Weifeng	Continuum-based approach for modelling the flexural behaviour of plain concrete beam under high-cycle fatigue loads	112442
Ferradi, Mohammed-Khalil / Cespedes, Xavier	A curved beam model with the asymptotic expansion method	112494
Ma, Hui / Jia, Chenjun / Xi, Jiacheng / Dong, Jing / Zhang, Xicheng / Zhao, Yanli	Cyclic loading test and nonlinear analysis on composite frame consisting of steel reinforced recycled concrete columns and steel beams	112480
Iyama, Jun / Fukushima, Yoshihiro / Hasegawa, Takashi / Nakagawa, Hiroto / Kaneshiro, Yosuke	Detection of beam-end fractures in steel members based on local stiffness calculated by strain response	112419
Nobahar, Elnaz / Asgarian, Behrouz / Mercan, Oya	Development and experimental investigation of a post-tensioned self-centering yielding brace system	112440
Jiang, Fei / Ding, Youliang / Song, Yongsheng / Geng, Fangfang / Wang, Zhiwen	Digital Twin-driven framework for fatigue life prediction of steel bridges using a probabilistic multiscale model: Application to segmental orthotropic steel deck specimen	112461
Wakashima, Yoshiaki / Ishikawa, Koichiro / Shimizu, Hidemaru / Kitamori, Akihisa / Matsubara, Doppo / Tesfamariam, Solomon	Dynamic and long-term performance of wood friction connectors for timber shear walls	112351
Lyu, Yi-Fan / Li, Guo-Qiang / Wang, Yan-Bo / Li, Heng / Wang, Yuan-Zuo	Effect of bolt pre-tension on the bearing behavior of high strength steel connections	112491
Li, Ye / Chen, Hui / Yi, Wei-Jian / Peng, Fei / Li, Zhe / Zhou, Yun	Effect of member depth and concrete strength on shear strength of RC deep beams without transverse reinforcement	112427
Yuan, Cheng / Chen, Wensu / Pham, Thong M. / Hao, Hong / Chen, Li / Wang, Jun	Experimental and analytical study of flexural behaviour of BFRP sheets strengthened RC beams with new epoxy anchors	112441
Al-Abdwais, Ahmed H. / Al-Mahaidi, Riadh S.	Experimental and finite element analysis of flexural performance of RC beams retrofitted using near-surface mounted with CFRP composites and cement adhesive	112429
Kheyroddin, Ali / Rouhi, Sina / Dabiri, Hamed	An experimental study on the influence of incorporating lap or forging (GPW) splices on the cyclic performance of RC columns	112434
Xu, Chen / Xiao, Han / Zhang, Boyu / Fu, Jing / Masuya, Hiroshi	Fatigue behavior of steel fiber reinforced concrete composite girder under high cycle negative bending action	112432
Wang, Z. Y. / Zhou, X. F. / Liu, Z. F. / Wang, Q. Y.	Fatigue behaviour of composite girders with concrete-filled tubular flanges and corrugated webs—experimental study	112416
Liu, Tianhao / Huang, Fanglin / Wen, Weibin / He, Xuhui / Duan, Shengyu / Fang, Daining	Further insights of a composite implicit time integration scheme and its performance on linear seismic response analysis	112490
Kizilarslan, Emre / Bruneau, Michel	Hysteretic behavior of repaired C-shaped concrete filled-composite plate shear walls (C-PSW/CF)	112410
Selim, B. A. / Liu, Zishun	Impact analysis of functionally-graded graphene nanoplatelets-reinforced composite plates laying on Winkler-Pasternak elastic foundations applying a meshless approach	112453
Shao, Yi / Billington, Sarah L.	Impact of cyclic loading on longitudinally-reinforced UHPC flexural members with different fiber volumes and reinforcing ratios	112454
Stierschneider, Elisabeth / Tamparopoulos, Alexios E. / McBride, Kenton E. / Bergmeister, Konrad	Influencing factors on creep displacement assessment of bonded fasteners in concrete	112448
Pirchio, David / Walsh, Kevin Q. / Kerr, Elizabeth / Giongo, Ivan / Giaretton, Marta / Weldon, Brad D. / Ciocci, Luca / Sorrentino, Luigi	Integrated framework to structurally model unreinforced masonry Italian medieval churches from photogrammetry to finite element model analysis through heritage building information modeling	112439
Terzic, Vesna / Villanueva, Peny K.	Method for probabilistic evaluation of post-earthquake functionality of building systems	112370
Langlade, T. / Bertrand, D. / Grange, S. / Candia, G. / de la Llera, J. C.	Modelling of earthquake-induced pounding between adjacent structures with a non-smooth contact dynamics method	112426
Sen, Debarshi / Long, James / Sun, Hao / Campman, Xander / Büyüköztürk, Oral	Multi-component deconvolution interferometry for data-driven prediction of seismic structural response	112405
Wilson, Peter / Teschemacher, Tobias / Bucher, Philipp / Wüchner, Roland	Non-conforming FEM-FEM coupling approaches and their application to dynamic structural analysis	112342
White, R. E. / Macdonald, J. H. G. / Alexander, N. A.	A nonlinear frequency-dependent spring-mass model for estimating loading caused by rhythmic human jumping	112229
Vollmer, M. / Bauer, A. / Frenck, J.-M. / Krooß, P. / Wetzel, A. / Middendorf, B. / Fehling, E. / Niendorf, T.	Novel prestressing applications in civil engineering structures enabled by Fe Mn Al Ni shape memory alloys	112430
Chen, Man-Tai / Young, Ben	Numerical analysis and design of cold-formed steel elliptical hollow sections under combined compression and bending	112417
Kadhim, Majid M. A. / Saleh, Abdul Ridah / Cunningham, Lee S. / Semendary, Ali A.	Numerical investigation of non-shear-reinforced UHPC hybrid flat slabs subject to punching shear	112444
Tran, Duong T. / Pham, Thong M. / Hao, Hong / Chen, Wensu	Numerical study on bending response of precast segmental concrete beams externally prestressed with FRP tendons	112423
Vigneri, Valentino / Odenbreit, Christoph / Romero, Alfredo	Numerical study on design rules for minimum degree of shear connection in propped steel–concrete composite beams	112466
Korus, Kamil / Salamak, Marek / Jasiński, Marcin	Optimization of geometric parameters of arch bridges using visual programming FEM components and genetic algorithm	112465
Jin, Chungkuk / Chung, Woo Chul / Kwon, Do-Soo / Kim, MooHyun	Optimization of tuned mass damper for seismic control of submerged floating tunnel	112460
Trabucchi, Ivan / Tiberti, Giuseppe / Plizzari, Giovanni A.	A parametric numerical study on the behavior of large precast tunnel segments during TBM thrust phase	112253
Papasotiriou, Alexios / Athanatopoulou, Asimina / Kostinakis, Konstantinos	Parametric study of the masonry infills’ effect on the seismic performance of R/C frames based on the use of different damage measures	112326
Wang, Zhen / Pan, Wei / Zhang, Yang	Parametric study on module wall-core system of concrete modular high-rises considering the influence of vertical inter-module connections	112436
Derkowski, Wit / Surma, Mateusz	Prestressed hollow core slabs for topped slim floors – Theory and research of the shear capacity	112464
Fang, Cheng / Ping, Yiwei / Zheng, Yue / Chen, Yiyi	Probabilistic economic seismic loss estimation of steel braced frames incorporating emerging self-centering technologies	112486
El Hajj Diab, Mohammad / Orcesi, Andre / Desprez, Cédric / Bleyer, Jeremy	A progressive collapse modelling strategy coupling the yield design theory with non-linear analysis	111832
Zhang, Guangda / Han, Qiang / Xu, Kun / Du, Xiuli / He, Weili	Quasi-static tests of CFST embedded RC column-to-precast cap beam with socket connection	112443
Glatz, Bernhard / Fink, Josef	A redesigned approach to the additional damping method in the dynamic analysis of simply supported railway bridges	112415
Peng, Rong-xin / Qiu, Wen-Liang	Research on freeze-thaw damage to RC column based on incompatibility deformation from pores	112462
Pang, Yutao / He, Wei / Zhong, Jian	Risk-based design and optimization of shape memory alloy restrained sliding bearings for highway bridges under near-fault ground motions	112421
Qissab Al-Janabi, Musab Aied / Yang, T. Y.	Seismic performance assessment of novel self-centering friction-based eccentrically braced frames	112456
Shoushtari, Elmira / Saiidi, M. Saiid / Itani, Ahmad / Moustafa, Mohamed A.	Seismic performance of a two-span steel girder bridge with ABC connections	112502
Arroyo, Orlando / Feliciano, Dirsa / Carrillo, Julian / Hube, Matías A.	Seismic performance of mid-rise thin concrete wall buildings lightly reinforced with deformed bars or welded wire mesh	112455
Yan, Yuhong / Liang, Hongjun / Lu, Yiyan / Zhao, Xiaobo	Slender CFST columns strengthened with textile-reinforced engineered cementitious composites under axial compression	112483
Urbański, Aleksander / Richter, Mateusz	Stability analysis of heavy machinery moving on weak subsoil. Analytical solution	112152
Feng, Zheng / Li, Chuanxi / He, Jun / Ke, Lu / Lei, Zhijie / Vasdravellis, George	Static and fatigue test on lightweight UHPC-OSD composite bridge deck system subjected to hogging moment	112459
Kang, Won-Hee / Tao, Zhong	Statistical data expansion using Kriging for probabilistic capacity factor calibration	112428
Mai, Anh Duc / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Strain model for discretely FRP confined concrete based on energy balance principle	112489
Schranz, Bernhard / Michels, Julien / Czaderski, Christoph / Motavalli, Masoud / Vogel, Thomas / Shahverdi, Moslem	Strengthening and prestressing of bridge decks with ribbed iron-based shape memory alloy bars	112467
Zhang, Chong / Tao, Mu-Xuan	Strong-column–weak-beam criterion for reinforced concrete frames subjected to biaxial seismic excitation	112481
Pizarro, Pablo N. / Massone, Leonardo M.	Structural design of reinforced concrete buildings based on deep neural networks	112377
Spasojevic, Marko / Daneshvar, Hossein / Niederwestberg, Jan / Chen, Yuxiang / Chui, Ying Hei / Gong, Meng	Structural performance of light wood shear walls built with insulated sheathing panels	112449
Jahangiri, V. / Sun, C. / Kong, F.	Study on a 3D pounding pendulum TMD for mitigating bi-directional vibration of offshore wind turbines	112383
Yun, Chen / Chao, Chen / Cong, Chen	Study on seismic performance of prefabricated self-centering beam to column rotation friction energy dissipation connection	112136
Zhong, Yukai / Sun, Yao / Tan, Kang Hai / Zhao, Ou	Testing, modelling and design of high strength concrete-filled high strength steel tube (HCFHST) stub columns under combined compression and bending	112334
Calotescu, Ileana / Torre, Stefano / Freda, Andrea / Solari, Giovanni	Wind tunnel testing of telecommunication lattice towers equipped with ancillaries	112526

Informations
sur cette fiche
IssueID
58587
Publié(e) le:
15.05.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - août 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - août 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.