Engineering Structures - October 2019

Published:	October 2019

Articles in this Issue

Author(s)	Title	Page(s)
Lin, Chi-Pu / Wiebe, Richard / Berman, Jeffrey W.	Analytical and numerical study of curved-base rocking walls	109397
Denavit, Mark D.	Approximate ponding analysis by amplified first-order analysis	109428
Ramseyer, Chris / Sherry, Samuel T.	Assessment of partial joint penetration welds on bolted end-plate connections	109400
Yang, Yong / Chen, Yang / Zhang, Wensong / Feng, Shiqiang	Behavior of partially precast steel reinforced concrete columns under eccentric loading	109429
Viau, Christian / Doudak, Ghasan	Behaviour and modelling of cross-laminated timber panels with boundary connections subjected to blast loads	109404
Wang, Yong / Duan, Yakun / Ma, Shuai / Huang, Zhaohui / Zhang, Yajun / Wu, Jiachao / Yuan, Guanglin / Zhou, Meng / Zhang, Gengyuan	Behaviour of continuous reinforced concrete floor slabs subjected to different compartment fires	109445
Hu, Xiaopeng / Peng, Gang / Niu, Ditao / Zhao, Nan	Bond characteristics of deformed steel bar in early-age frozen concrete during service period	109438
Bazli, Milad / Zhao, Xiao-Ling / Bai, Yu / Singh Raman, R. K. / Al-Saadi, Saad	Bond-slip behaviour between FRP tubes and seawater sea sand concrete	109421
Wang, Huajie / Wu, Qiongyao / Qian, Hongliang / Han, Kang / Fan, Feng	Buckling behavior of a circular steel tube with a bolt–ball joint under installation eccentricity	109407
Bernier, Carl / Padgett, Jamie E.	Buckling of aboveground storage tanks subjected to storm surge and wave loads	109388
Mateus, Jhon Alexander Segura / Tagawa, Hiroshi / Chen, Xingchen	Buckling-restrained brace using round steel bar cores restrained by inner round steel tubes and outer square steel tube	109379
Pan, Haoran / Kusunoki, Koichi / Hattori, Yuki	Capacity-curve-based damage evaluation approach for reinforced concrete buildings using seismic response data	109386
Hassanzadeh, Aydin / Gholizadeh, Saeed	Collapse-performance-aided design optimization of steel concentrically braced frames	109411
Morfidis, Konstantinos / Kostinakis, Konstantinos	Comparative evaluation of MFP and RBF neural networks’ ability for instant estimation of r/c buildings’ seismic damage level	109436
Choi, Soomin / Kim, Yoon Young	Consistent higher-order beam theory for thin-walled box beams using recursive analysis: Membrane deformation under doubly symmetric loads	109430
Caruso, Claudia / Bento, Rita / Castro, José Miguel	A contribution to the seismic performance and loss assessment of old RC wall-frame buildings	109369
Kurosawa, Ryotaro / Sakata, Hiroyasu / Qu, Zhe / Suyama, Takashi	Cyclic loading tests on RC moment frames retrofitted by PC frames with mild press joints through RC slabs for connection	109440
Fernández-Ruiz, Manuel Alejandro / Moskaleva, Anastasiia / Gil-Martín, Luisa María / Palomares, Antonio / Hernández-Montes, Enrique	Design and form-finding of compression structures with prestressing tendons	109394
Li, Lin / Jiang, Zhiyu / Ong, Muk Chen / Hu, Weifei	Design optimization of mooring system: An application to a vessel-shaped offshore fish farm	109363
Barontini, Alberto / Perera, Ricardo / Masciotta, Maria Giovanna / Amado-Mendes, Paulo / Ramos, Luis / Lourenço, Paulo	Deterministically generated negative selection algorithm for damage detection in civil engineering systems	109444
Ye, Kun / Xiao, Yan / Hu, Liang	A direct displacement-based design procedure for base-isolated building structures with lead rubber bearings (LRBs)	109402
Gao, Kang / Li, Ruilong / Yang, Jie	Dynamic characteristics of functionally graded porous beams with interval material properties	109441
Aloisio, Angelo / Alaggio, Rocco / Fragiacomo, Massimo	Dynamic identification of a masonry façade from seismic response data based on an elementary Ordinary Least Squares approach	109415
Shi, Weizhuo / Shafei, Behrouz / Liu, Zhengyu / Phares, Brent M.	Early-age performance of longitudinal bridge joints made with shrinkage-compensating cement concrete	109391
Kang, Tae-Won / Yang, Hyun-Ik / Jeon, Jong-Su	Earthquake-induced sloshing effects on the hydrodynamic pressure response of rigid cylindrical liquid storage tanks using CFD simulation	109376
Shan, Sidi / Li, Shuang / Kose, Mehmet Metin / Sezen, Halil / Wang, Shuhong	Effect of partial infill walls on collapse behavior of reinforced concrete frames	109377
Pan, Yuxin / Ventura, Carlos E. / Finn, W. D. Liam / Xiong, Haibei	Effects of ground motion duration on the seismic damage to and collapse capacity of a mid-rise woodframe building	109451
Setiawan, Andri / Vollum, Robert L. / Macorini, Lorenzo / Izzuddin, Bassam	Efficient 3-D modelling of punching shear failure at slab-column connections by means of nonlinear joint elements	109372
Nguyen, Phi Long / Vu, Xuan Hong / Ferrier, Emmanuel	Elevated temperature thermomechanical behaviour of near surface mounted CFRP reinforced concrete specimens: Effect of adhesive at concrete/CFRP interface	109361
Yang, Han / Feng, Yuan / Wang, Hexiang / Jeremic, Boris	Energy dissipation analysis for inelastic reinforced concrete and steel beam-columns	109431
Reuland, Yves / Lestuzzi, Pierino / Smith, Ian F. C.	An engineering approach to model-class selection for measurement-supported post-earthquake assessment	109408
Park, Jong-Woong / Moon, Do-Soo / Sim, Sung-Han / Spencer, Billie F.	Equivalent neutral axis for structural condition assessment using multi-sensor fusion	109350
Nader Tehrani, Bahareh / Mostofinejad, Davood / Hosseini, Seyed Mohammad	Experimental and analytical study on flexural strengthening of RC beams via prestressed EBROG CFRP plates	109395
Liu, Yangqing / Xin, Haohui / Liu, Yuqing	Experimental and analytical study on shear mechanism of rubber-ring perfobond connector	109382
Chen, Kangming / Huang, Hanhui / Wu, Qingxiong / Nakamura, Shozo / Chen, Baochun	Experimental and finite element analysis research on the fatigue performance of CHS K-joints	109365
Kang, Chongjie / Bode, Matthias / Wenner, Marc / Marx, Steffen	Experimental and numerical investigations of rail behaviour under compressive force on ballastless track systems	109413
Ahmed, Mizan / Liang, Qing Quan / Patel, Vipulkumar Ishvarbhai / Hadi, Muhammad N. S.	Experimental and numerical studies of square concrete-filled double steel tubular short columns under eccentric loading	109419
Hosseini, Seyed Armin / Kheyroddin, Ali / Mastali, Mohammad	An experimental investigation into the impacts of eccentric openings on the in-plane behavior of squat RC shear walls	109410
Wang, Haidong / Zhou, Xiaodong / Wang, Lianhua	Experimental investigation of damaged circular reinforced concrete columns with pre-tensioned steel hoops	109384
Jewett, Jackson L. / Carstensen, Josephine V.	Experimental investigation of strut-and-tie layouts in deep RC beams designed with hybrid bi-linear topology optimization	109322
Urban, Tadeusz / Gołdyn, Michał / Krawczyk, Łukasz / Sowa, Łukasz	Experimental investigations on punching shear of lightweight aggregate concrete flat slabs	109371
Nie, Xin / Wang, Jia-Ji / Tao, Mu-Xuan / Fan, Jian-Sheng / Bu, Fan-Min	Experimental study of flexural critical reinforced concrete filled composite plate shear walls	109439
Sun, Zeyang / Fu, Linchen / Feng, De-Cheng / Vatuloka, Apete R. / Wei, Yang / Wu, Gang	Experimental study on the flexural behavior of concrete beams reinforced with bundled hybrid steel/FRP bars	109443
Nguyen, Sinh-Khoa / Chiambaretto, Pierre-Louis / Charlotte, Miguel / Michon, Guilhem / Morlier, Joseph / Gourinat, Yves	Experimental testing of pre-stressed granular assemblies as a surrogate material for the dynamic analysis of launcher cryogenic tanks	109433
Visy, Dávid / Szedlák, Máté / Geleji, Borbála B. / Ádány, Sándor	Flexural buckling of thin-walled lipped channel columns with slotted webs: Numerical and analytical studies	109399
Martin, Jonathan / Alipour, Alice / Sarkar, Partha	Fragility surfaces for multi-hazard analysis of suspension bridges under earthquakes and microbursts	109169
Wang, Kangkang / Zhao, Canhui / Wu, Bin / Deng, Kailai / Cui, Bing	Fully-scale test and analysis of fully dry-connected prefabricated steel-UHPC composite beam under hogging moments	109380
Sharma, Nitin / Mahapatra, Trupti Ranjan / Panda, Subrata Kumar	Hygrothermal effect on vibroacoustic behaviour of higher-order sandwich panel structure with laminated composite face sheets	109355
Jin, Liu / Zhang, Renbo / Li, Liang / Du, Xiuli / Yao, Yunlong	Impact behavior of SFRC beams at elevated temperatures: Experimental and analytical studies	109401
Navarro-Gómez, A. / Bonet, José L.	Improving the seismic behaviour of reinforced concrete moment resisting frames by means of SMA bars and ultra-high performance concrete	109409
Bolis, V. / Paderno, A. / Preti, M.	Infill with sliding panels in presence of a full-height opening: Experimental in-plane response	109368
Das, Sourav / Choudhury, Satyabrata	Influence of effective stiffness on the performance of RC frame buildings designed using displacement-based method and evaluation of column effective stiffness using ANN	109354
Marinković, Marko / Butenweg, Christoph	Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames	109435
Yang, Jincheng / Haghani, Reza / Al-Emrani, Mohammad	Innovative prestressing method for externally bonded CFRP laminates without mechanical anchorage	109416
D'Arenzo, Giuseppe / Rinaldin, Giovanni / Fossetti, Marinella / Fragiacomo, Massimo	An innovative shear-tension angle bracket for Cross-Laminated Timber structures: Experimental tests and numerical modelling	109434
Classen, Martin / Kurz, Wolfgang / Schäfer, Markus / Hegger, Josef	A mechanical design model for steel and concrete composite members with web openings	109417
Jiradilok, P. / Nagai, K. / Matsumoto, K.	Meso-scale modeling of non-uniformly corroded reinforced concrete using 3D discrete analysis	109378
Pauletta, Margherita	Method to design fiber-reinforced elastomeric isolators (U-FREIs) and application	109366
Dammak, Khalil / El Hami, Abdelkhalak	Multi-objective reliability based design optimization of coupled acoustic-structural system	109389
Rabcan, Jan / Levashenko, Vitaly / Zaitseva, Elena / Kvassay, Miroslav / Subbotin, Sergey	Non-destructive diagnostic of aircraft engine blades by Fuzzy Decision Tree	109396
Song, Zu Lan / Hui, Yi / Law, Siu Seong / Chen, Zheng Qing / Shao, Zheng Ya	Non-linear aerodynamic load and parameters estimation for a SDOF wind-structure coupling system in wind tunnel test	109385
Sofi, Fayaz A. / Steelman, Joshua S.	Nonlinear flexural distribution behavior and ultimate system capacity of skewed steel girder bridges	109392
Patel, Vipulkumar Ishvarbhai / Liang, Qing Quan / Hadi, Muhammad N. S.	Numerical study of circular double-skin concrete-filled aluminum tubular stub columns	109418
Sasmal, Saptarshi / Voggu, Srinivas	Performance evaluation of differently designed beam-column joints under cyclic shear-torsion loading	109447
Han, Qihao / Sakata, Hiroyasu / Maida, Yusuke / Mori, Takayoshi / Maegawa, Toshio / Zhang, Yongshan	Performance evaluation of RC frame with RC wall piers equipped with unbonded steel rod dampers subjected to in-plane loading	109403
Ma, Rujin / Cui, Chuanjie / Ma, Minglei / Chen, Airong	Performance-based design of bridge structures under vehicle-induced fire accidents: Basic framework and a case study	109390
Teoh, Yee Er / Alipour, Alice / Cancelli, Alessandro	Probabilistic performance assessment of power distribution infrastructure under wind events	109199
Roshanfekr Rad, Zahra / Ghobadi, Mohammad Soheil / Yakhchalian, Mansoor	Probabilistic seismic collapse and residual drift assessment of smart buildings equipped with shape memory alloy connections	109375
Nassar, Mohamad / Guizani, Lotfi / Nollet, Marie-José / Tahan, Antoine	A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions	109353
Grisaro, Hezi Y. / Dancygier, Avraham N.	Representation of damage caused by fragmentation impact in design and analysis of reinforced concrete barriers	109387
Tong, Teng / Zhuo, Weiding / Jiang, Xiaofang / Lei, Haipeng / Liu, Zhao	Research on seismic resilience of prestressed precast segmental bridge piers reinforced with high-strength bars through experimental testing and numerical modelling	109335
Tankova, Trayana / da Silva, Luís Simões / Balakrishnam, Marimuthu / Rodrigues, Dulce / Launert, Benjamin / Pasternak, Hartmut / Tun, Tin Yadanar	Residual stresses in welded I section steel members	109398
Lopez-Molina, A. / Doudak, G.	Retrofit techniques for Cross-Laminated Timber (CLT) elements subjected to blast loads	109450
Franco, Jean Michel / Caicedo, Juan M. / Marulanda, Johannio / Sutton, Michael / Thomson, Peter	RGB-D-DIC technique for low-cost 3D displacement fields measurements	109457
Pei, Yan / Li, Shucai / Agostini, Franck / Skoczylas, Frédéric / Masson, Benoît	Sealing of concrete confining structures of French nuclear reactors	109283
Tang, Baizan / Chen, Su / Li, Xiaojun / Xiong, Lihong / Chen, Hua-Peng / Feng, Qingsong	Seismic performance of RC frames with EPSC latticed concrete infill walls	109437
Westenenk, B. / Edwards, J. J. / de la Llera, J. C. / Jünemann, R.	Self-Centering Frictional Damper (SCFD)	109425
Deng, Mingke / Dong, Zhifang / Wang, Xuesong / Zhang, Yangxi / Zhou, Tiegang	Shaking table tests of a half-scale 2-storey URM building retrofitted with a high ductility fibre reinforced concrete overlay system	109424
Zhao, Xiang-bi / Zhang, Feng-Liang / Xue, Jian-Yang / Ma, Lin-lin	Shaking table tests on seismic behavior of ancient timber structure reinforced with CFRP sheet	109405
Khatibinia, Mohsen / Jalaipour, Mehdi / Gharehbaghi, Sadjad	Shape optimization of U-shaped steel dampers subjected to cyclic loading using an efficient hybrid approach	108874
Molkens, Tom / Dobrić, Jelena / Rossi, Barbara	Shear resistance of headed shear studs welded on welded plates in composite floors	109412
Colonna, D. / Leone, M. / Aiello, M. A. / Tortelli, S. / Marchi, M. I.	Short and long-term behaviour of R.C. beams made with CSA binder	109370
Rabbani, V. / Hodaei, M. / Deng, X. / Lu, H. / Hui, D. / Wu, N.	Sound transmission through a thick-walled FGM piezo-laminated cylindrical shell filled with and submerged in compressible fluids	109323
Bokor, Boglárka / Sharma, Akanshu / Hofmann, Jan	Spring modelling approach for evaluation and design of tension loaded anchor groups in case of concrete cone failure	109414
Wu, Bo / Jian, Si-Min / Zhao, Xin-Yu	Structural behavior of steel-concrete partially encased composite columns containing demolished concrete lumps under axial compression	109383
Yuan, Yangguang / Han, Wanshui / Li, Guangling / Xie, Qing / Guo, Qi	Time-dependent reliability assessment of existing concrete bridges including non-stationary vehicle load and resistance processes	109426
Kodakkal, Anoop / Saha, Sandip K. / Sepahvand, Kheirollah / Matsagar, Vasant A. / Duddeck, Fabian / Marburg, Steffen	Uncertainties in dynamic response of buildings with non-linear base-isolators	109423
Huang, Zheng / Tu, Yongming / Meng, Shaoping / Bagge, Niklas / Nilimaa, Jonny / Blanksvärd, Thomas	Validation of a numerical method for predicting shear deformation of reinforced concrete beams	109367
Chapain, Suvash / Aly, Aly Mousaad	Vibration attenuation in high-rise buildings to achieve system-level performance under multiple hazards	109352
Bamer, Franz / Strubel, Nicolas / Shi, Jianye / Markert, Bernd	A visco-elastoplastic pounding damage formulation	109373
Ortega, Javier / Vasconcelos, Graça / Rodrigues, Hugo / Correia, Mariana	A vulnerability index formulation for the seismic vulnerability assessment of vernacular architecture	109381

About this
data sheet
IssueID
28789
Published on:
09/07/2019
Last updated on:
04/08/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - October 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - October 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.