Engineering Structures - Oktober 2019

Erschienen:	Oktober 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Lin, Chi-Pu / Wiebe, Richard / Berman, Jeffrey W.	Analytical and numerical study of curved-base rocking walls	109397
Denavit, Mark D.	Approximate ponding analysis by amplified first-order analysis	109428
Ramseyer, Chris / Sherry, Samuel T.	Assessment of partial joint penetration welds on bolted end-plate connections	109400
Yang, Yong / Chen, Yang / Zhang, Wensong / Feng, Shiqiang	Behavior of partially precast steel reinforced concrete columns under eccentric loading	109429
Viau, Christian / Doudak, Ghasan	Behaviour and modelling of cross-laminated timber panels with boundary connections subjected to blast loads	109404
Wang, Yong / Duan, Yakun / Ma, Shuai / Huang, Zhaohui / Zhang, Yajun / Wu, Jiachao / Yuan, Guanglin / Zhou, Meng / Zhang, Gengyuan	Behaviour of continuous reinforced concrete floor slabs subjected to different compartment fires	109445
Hu, Xiaopeng / Peng, Gang / Niu, Ditao / Zhao, Nan	Bond characteristics of deformed steel bar in early-age frozen concrete during service period	109438
Bazli, Milad / Zhao, Xiao-Ling / Bai, Yu / Singh Raman, R. K. / Al-Saadi, Saad	Bond-slip behaviour between FRP tubes and seawater sea sand concrete	109421
Wang, Huajie / Wu, Qiongyao / Qian, Hongliang / Han, Kang / Fan, Feng	Buckling behavior of a circular steel tube with a bolt–ball joint under installation eccentricity	109407
Bernier, Carl / Padgett, Jamie E.	Buckling of aboveground storage tanks subjected to storm surge and wave loads	109388
Mateus, Jhon Alexander Segura / Tagawa, Hiroshi / Chen, Xingchen	Buckling-restrained brace using round steel bar cores restrained by inner round steel tubes and outer square steel tube	109379
Pan, Haoran / Kusunoki, Koichi / Hattori, Yuki	Capacity-curve-based damage evaluation approach for reinforced concrete buildings using seismic response data	109386
Hassanzadeh, Aydin / Gholizadeh, Saeed	Collapse-performance-aided design optimization of steel concentrically braced frames	109411
Morfidis, Konstantinos / Kostinakis, Konstantinos	Comparative evaluation of MFP and RBF neural networks’ ability for instant estimation of r/c buildings’ seismic damage level	109436
Choi, Soomin / Kim, Yoon Young	Consistent higher-order beam theory for thin-walled box beams using recursive analysis: Membrane deformation under doubly symmetric loads	109430
Caruso, Claudia / Bento, Rita / Castro, José Miguel	A contribution to the seismic performance and loss assessment of old RC wall-frame buildings	109369
Kurosawa, Ryotaro / Sakata, Hiroyasu / Qu, Zhe / Suyama, Takashi	Cyclic loading tests on RC moment frames retrofitted by PC frames with mild press joints through RC slabs for connection	109440
Fernández-Ruiz, Manuel Alejandro / Moskaleva, Anastasiia / Gil-Martín, Luisa María / Palomares, Antonio / Hernández-Montes, Enrique	Design and form-finding of compression structures with prestressing tendons	109394
Li, Lin / Jiang, Zhiyu / Ong, Muk Chen / Hu, Weifei	Design optimization of mooring system: An application to a vessel-shaped offshore fish farm	109363
Barontini, Alberto / Perera, Ricardo / Masciotta, Maria Giovanna / Amado-Mendes, Paulo / Ramos, Luis / Lourenço, Paulo	Deterministically generated negative selection algorithm for damage detection in civil engineering systems	109444
Ye, Kun / Xiao, Yan / Hu, Liang	A direct displacement-based design procedure for base-isolated building structures with lead rubber bearings (LRBs)	109402
Gao, Kang / Li, Ruilong / Yang, Jie	Dynamic characteristics of functionally graded porous beams with interval material properties	109441
Aloisio, Angelo / Alaggio, Rocco / Fragiacomo, Massimo	Dynamic identification of a masonry façade from seismic response data based on an elementary Ordinary Least Squares approach	109415
Shi, Weizhuo / Shafei, Behrouz / Liu, Zhengyu / Phares, Brent M.	Early-age performance of longitudinal bridge joints made with shrinkage-compensating cement concrete	109391
Kang, Tae-Won / Yang, Hyun-Ik / Jeon, Jong-Su	Earthquake-induced sloshing effects on the hydrodynamic pressure response of rigid cylindrical liquid storage tanks using CFD simulation	109376
Shan, Sidi / Li, Shuang / Kose, Mehmet Metin / Sezen, Halil / Wang, Shuhong	Effect of partial infill walls on collapse behavior of reinforced concrete frames	109377
Pan, Yuxin / Ventura, Carlos E. / Finn, W. D. Liam / Xiong, Haibei	Effects of ground motion duration on the seismic damage to and collapse capacity of a mid-rise woodframe building	109451
Setiawan, Andri / Vollum, Robert L. / Macorini, Lorenzo / Izzuddin, Bassam	Efficient 3-D modelling of punching shear failure at slab-column connections by means of nonlinear joint elements	109372
Nguyen, Phi Long / Vu, Xuan Hong / Ferrier, Emmanuel	Elevated temperature thermomechanical behaviour of near surface mounted CFRP reinforced concrete specimens: Effect of adhesive at concrete/CFRP interface	109361
Yang, Han / Feng, Yuan / Wang, Hexiang / Jeremic, Boris	Energy dissipation analysis for inelastic reinforced concrete and steel beam-columns	109431
Reuland, Yves / Lestuzzi, Pierino / Smith, Ian F. C.	An engineering approach to model-class selection for measurement-supported post-earthquake assessment	109408
Park, Jong-Woong / Moon, Do-Soo / Sim, Sung-Han / Spencer, Billie F.	Equivalent neutral axis for structural condition assessment using multi-sensor fusion	109350
Nader Tehrani, Bahareh / Mostofinejad, Davood / Hosseini, Seyed Mohammad	Experimental and analytical study on flexural strengthening of RC beams via prestressed EBROG CFRP plates	109395
Liu, Yangqing / Xin, Haohui / Liu, Yuqing	Experimental and analytical study on shear mechanism of rubber-ring perfobond connector	109382
Chen, Kangming / Huang, Hanhui / Wu, Qingxiong / Nakamura, Shozo / Chen, Baochun	Experimental and finite element analysis research on the fatigue performance of CHS K-joints	109365
Kang, Chongjie / Bode, Matthias / Wenner, Marc / Marx, Steffen	Experimental and numerical investigations of rail behaviour under compressive force on ballastless track systems	109413
Ahmed, Mizan / Liang, Qing Quan / Patel, Vipulkumar Ishvarbhai / Hadi, Muhammad N. S.	Experimental and numerical studies of square concrete-filled double steel tubular short columns under eccentric loading	109419
Hosseini, Seyed Armin / Kheyroddin, Ali / Mastali, Mohammad	An experimental investigation into the impacts of eccentric openings on the in-plane behavior of squat RC shear walls	109410
Wang, Haidong / Zhou, Xiaodong / Wang, Lianhua	Experimental investigation of damaged circular reinforced concrete columns with pre-tensioned steel hoops	109384
Jewett, Jackson L. / Carstensen, Josephine V.	Experimental investigation of strut-and-tie layouts in deep RC beams designed with hybrid bi-linear topology optimization	109322
Urban, Tadeusz / Gołdyn, Michał / Krawczyk, Łukasz / Sowa, Łukasz	Experimental investigations on punching shear of lightweight aggregate concrete flat slabs	109371
Nie, Xin / Wang, Jia-Ji / Tao, Mu-Xuan / Fan, Jian-Sheng / Bu, Fan-Min	Experimental study of flexural critical reinforced concrete filled composite plate shear walls	109439
Sun, Zeyang / Fu, Linchen / Feng, De-Cheng / Vatuloka, Apete R. / Wei, Yang / Wu, Gang	Experimental study on the flexural behavior of concrete beams reinforced with bundled hybrid steel/FRP bars	109443
Nguyen, Sinh-Khoa / Chiambaretto, Pierre-Louis / Charlotte, Miguel / Michon, Guilhem / Morlier, Joseph / Gourinat, Yves	Experimental testing of pre-stressed granular assemblies as a surrogate material for the dynamic analysis of launcher cryogenic tanks	109433
Visy, Dávid / Szedlák, Máté / Geleji, Borbála B. / Ádány, Sándor	Flexural buckling of thin-walled lipped channel columns with slotted webs: Numerical and analytical studies	109399
Martin, Jonathan / Alipour, Alice / Sarkar, Partha	Fragility surfaces for multi-hazard analysis of suspension bridges under earthquakes and microbursts	109169
Wang, Kangkang / Zhao, Canhui / Wu, Bin / Deng, Kailai / Cui, Bing	Fully-scale test and analysis of fully dry-connected prefabricated steel-UHPC composite beam under hogging moments	109380
Sharma, Nitin / Mahapatra, Trupti Ranjan / Panda, Subrata Kumar	Hygrothermal effect on vibroacoustic behaviour of higher-order sandwich panel structure with laminated composite face sheets	109355
Jin, Liu / Zhang, Renbo / Li, Liang / Du, Xiuli / Yao, Yunlong	Impact behavior of SFRC beams at elevated temperatures: Experimental and analytical studies	109401
Navarro-Gómez, A. / Bonet, José L.	Improving the seismic behaviour of reinforced concrete moment resisting frames by means of SMA bars and ultra-high performance concrete	109409
Bolis, V. / Paderno, A. / Preti, M.	Infill with sliding panels in presence of a full-height opening: Experimental in-plane response	109368
Das, Sourav / Choudhury, Satyabrata	Influence of effective stiffness on the performance of RC frame buildings designed using displacement-based method and evaluation of column effective stiffness using ANN	109354
Marinković, Marko / Butenweg, Christoph	Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames	109435
Yang, Jincheng / Haghani, Reza / Al-Emrani, Mohammad	Innovative prestressing method for externally bonded CFRP laminates without mechanical anchorage	109416
D'Arenzo, Giuseppe / Rinaldin, Giovanni / Fossetti, Marinella / Fragiacomo, Massimo	An innovative shear-tension angle bracket for Cross-Laminated Timber structures: Experimental tests and numerical modelling	109434
Classen, Martin / Kurz, Wolfgang / Schäfer, Markus / Hegger, Josef	A mechanical design model for steel and concrete composite members with web openings	109417
Jiradilok, P. / Nagai, K. / Matsumoto, K.	Meso-scale modeling of non-uniformly corroded reinforced concrete using 3D discrete analysis	109378
Pauletta, Margherita	Method to design fiber-reinforced elastomeric isolators (U-FREIs) and application	109366
Dammak, Khalil / El Hami, Abdelkhalak	Multi-objective reliability based design optimization of coupled acoustic-structural system	109389
Rabcan, Jan / Levashenko, Vitaly / Zaitseva, Elena / Kvassay, Miroslav / Subbotin, Sergey	Non-destructive diagnostic of aircraft engine blades by Fuzzy Decision Tree	109396
Song, Zu Lan / Hui, Yi / Law, Siu Seong / Chen, Zheng Qing / Shao, Zheng Ya	Non-linear aerodynamic load and parameters estimation for a SDOF wind-structure coupling system in wind tunnel test	109385
Sofi, Fayaz A. / Steelman, Joshua S.	Nonlinear flexural distribution behavior and ultimate system capacity of skewed steel girder bridges	109392
Patel, Vipulkumar Ishvarbhai / Liang, Qing Quan / Hadi, Muhammad N. S.	Numerical study of circular double-skin concrete-filled aluminum tubular stub columns	109418
Sasmal, Saptarshi / Voggu, Srinivas	Performance evaluation of differently designed beam-column joints under cyclic shear-torsion loading	109447
Han, Qihao / Sakata, Hiroyasu / Maida, Yusuke / Mori, Takayoshi / Maegawa, Toshio / Zhang, Yongshan	Performance evaluation of RC frame with RC wall piers equipped with unbonded steel rod dampers subjected to in-plane loading	109403
Ma, Rujin / Cui, Chuanjie / Ma, Minglei / Chen, Airong	Performance-based design of bridge structures under vehicle-induced fire accidents: Basic framework and a case study	109390
Teoh, Yee Er / Alipour, Alice / Cancelli, Alessandro	Probabilistic performance assessment of power distribution infrastructure under wind events	109199
Roshanfekr Rad, Zahra / Ghobadi, Mohammad Soheil / Yakhchalian, Mansoor	Probabilistic seismic collapse and residual drift assessment of smart buildings equipped with shape memory alloy connections	109375
Nassar, Mohamad / Guizani, Lotfi / Nollet, Marie-José / Tahan, Antoine	A probability-based reliability assessment approach of seismic base-isolated bridges in cold regions	109353
Grisaro, Hezi Y. / Dancygier, Avraham N.	Representation of damage caused by fragmentation impact in design and analysis of reinforced concrete barriers	109387
Tong, Teng / Zhuo, Weiding / Jiang, Xiaofang / Lei, Haipeng / Liu, Zhao	Research on seismic resilience of prestressed precast segmental bridge piers reinforced with high-strength bars through experimental testing and numerical modelling	109335
Tankova, Trayana / da Silva, Luís Simões / Balakrishnam, Marimuthu / Rodrigues, Dulce / Launert, Benjamin / Pasternak, Hartmut / Tun, Tin Yadanar	Residual stresses in welded I section steel members	109398
Lopez-Molina, A. / Doudak, G.	Retrofit techniques for Cross-Laminated Timber (CLT) elements subjected to blast loads	109450
Franco, Jean Michel / Caicedo, Juan M. / Marulanda, Johannio / Sutton, Michael / Thomson, Peter	RGB-D-DIC technique for low-cost 3D displacement fields measurements	109457
Pei, Yan / Li, Shucai / Agostini, Franck / Skoczylas, Frédéric / Masson, Benoît	Sealing of concrete confining structures of French nuclear reactors	109283
Tang, Baizan / Chen, Su / Li, Xiaojun / Xiong, Lihong / Chen, Hua-Peng / Feng, Qingsong	Seismic performance of RC frames with EPSC latticed concrete infill walls	109437
Westenenk, B. / Edwards, J. J. / de la Llera, J. C. / Jünemann, R.	Self-Centering Frictional Damper (SCFD)	109425
Deng, Mingke / Dong, Zhifang / Wang, Xuesong / Zhang, Yangxi / Zhou, Tiegang	Shaking table tests of a half-scale 2-storey URM building retrofitted with a high ductility fibre reinforced concrete overlay system	109424
Zhao, Xiang-bi / Zhang, Feng-Liang / Xue, Jian-Yang / Ma, Lin-lin	Shaking table tests on seismic behavior of ancient timber structure reinforced with CFRP sheet	109405
Khatibinia, Mohsen / Jalaipour, Mehdi / Gharehbaghi, Sadjad	Shape optimization of U-shaped steel dampers subjected to cyclic loading using an efficient hybrid approach	108874
Molkens, Tom / Dobrić, Jelena / Rossi, Barbara	Shear resistance of headed shear studs welded on welded plates in composite floors	109412
Colonna, D. / Leone, M. / Aiello, M. A. / Tortelli, S. / Marchi, M. I.	Short and long-term behaviour of R.C. beams made with CSA binder	109370
Rabbani, V. / Hodaei, M. / Deng, X. / Lu, H. / Hui, D. / Wu, N.	Sound transmission through a thick-walled FGM piezo-laminated cylindrical shell filled with and submerged in compressible fluids	109323
Bokor, Boglárka / Sharma, Akanshu / Hofmann, Jan	Spring modelling approach for evaluation and design of tension loaded anchor groups in case of concrete cone failure	109414
Wu, Bo / Jian, Si-Min / Zhao, Xin-Yu	Structural behavior of steel-concrete partially encased composite columns containing demolished concrete lumps under axial compression	109383
Yuan, Yangguang / Han, Wanshui / Li, Guangling / Xie, Qing / Guo, Qi	Time-dependent reliability assessment of existing concrete bridges including non-stationary vehicle load and resistance processes	109426
Kodakkal, Anoop / Saha, Sandip K. / Sepahvand, Kheirollah / Matsagar, Vasant A. / Duddeck, Fabian / Marburg, Steffen	Uncertainties in dynamic response of buildings with non-linear base-isolators	109423
Huang, Zheng / Tu, Yongming / Meng, Shaoping / Bagge, Niklas / Nilimaa, Jonny / Blanksvärd, Thomas	Validation of a numerical method for predicting shear deformation of reinforced concrete beams	109367
Chapain, Suvash / Aly, Aly Mousaad	Vibration attenuation in high-rise buildings to achieve system-level performance under multiple hazards	109352
Bamer, Franz / Strubel, Nicolas / Shi, Jianye / Markert, Bernd	A visco-elastoplastic pounding damage formulation	109373
Ortega, Javier / Vasconcelos, Graça / Rodrigues, Hugo / Correia, Mariana	A vulnerability index formulation for the seismic vulnerability assessment of vernacular architecture	109381

Über diese
Datenseite
IssueID
28789
Veröffentlicht am:
09.07.2019
Geändert am:
04.08.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - Oktober 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - Oktober 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.