Engineering Structures - September 2019

Published:	September 2019

Articles in this Issue

Author(s)	Title	Page(s)
Pourbehi, Mohammad S. / van Zijl, Gideon P. A. G. / Strasheim, J. A. vB.	Analysis of combined action of seismic loads and alkali-silica reaction in concrete dams considering the key chemical-physical-mechanical factors and fluid-structure interaction	263-273
Li, Fuhai / Feng, Zhihua / Deng, Kailai / Yu, Yongjiang / Hu, Zhiming / Jin, Hesong	Axial behavior of reinforced PP-ECC column and hybrid NSC-ECC column under compression	223-230
Jacques, Eric / Saatcioglu, Murat	Bond-slip modelling of reinforced concrete lap splices subjected to low and high strain rates	568-578
Zhang, Ruiyang / Phillips, Brian M. / Fernández-Cabán, Pedro L. / Masters, Forrest J.	Cyber-physical structural optimization using real-time hybrid simulation	113-124
Ou, Yu-Chen / Hoang, Le / Roh, Hwasung	Cyclic behavior of squat reinforced concrete walls with openings typical of exterior walls of row houses in Taiwan	231-242
Mojtabaei, Seyed Mohammad / Ye, Jun / Hajirasouliha, Iman	Development of optimum cold-formed steel beams for serviceability and ultimate limit states using Big Bang-Big Crunch optimisation	172-181
Farahani, D. / Behnamfar, F. / Sayyadpour, H.	Effect of pounding on nonlinear seismic response of torsionally coupled steel structures resting on flexible soil	243-262
Chen, Yong / Hu, Zhongzheng / Guo, Yong / Wang, Jiyang / Tong, Genshu / Liu, Qingsong / Pan, Yu	Effects of chord pre-load on strength of CHS X-joints stiffened with external ring stiffeners and gusset plates	125-143
Fan, Wei / Liu, Bin / Huang, Xu / Sun, Yang	Efficient modeling of flexural and shear behaviors in reinforced concrete beams and columns subjected to low-velocity impact loading	22-50
Mehrsoroush, Ali / Saiidi, M. Saiid	Experimental and analytical studies of base pipe pin connections under direct tension	210-222
Ma, Huihuan / Zhao, Yi / Fan, Feng / Yu, Zhiwei / Zhi, Xudong	Experimental and numerical study of new connection systems for a large-span hyperbolic steel cooling tower	452-468
Issa, Anas Salem / Shahria Alam, M.	Experimental and numerical study on the seismic performance of a self-centering bracing system using closed-loop dynamic (CLD) testing	144-158
Ma, Yuhong / Li, Yanmin / Zhao, Guifeng / Zhou, Fulin	Experimental research on the time-varying law of performance for natural rubber laminated bearings subjected to seawater dry-wet cycles	159-171
Zhang, Yanxia / Li, Quangang / Zhuge, Yan / Liu, Anran / Zhao, Wenzhan	Experimental study on spatial prefabricated self-centering steel frame with beam-column connections containing bolted web friction devices	1-21
Shao, Changjiang / Qi, Qiming / Wang, Meng / Xiao, Zhenghao / Wei, Wang / Hu, Chenxu / Xiao, Laichuan	Experimental study on the seismic performance of round-ended hollow piers	309-323
Hofmeister, Benedikt / Bruns, Marlene / Rolfes, Raimund	Finite element model updating using deterministic optimisation: A global pattern search approach	373-381
Peng, Jianxin / Xiao, Linfa / Zhang, Jianren / Cai, C. S. / Wang, Lei	Flexural behavior of corroded HPS beams	274-287
Song, Weiwei / Liang, Shuguo / Song, Jie / Zou, Lianghao / Hu, Gang	Investigation on wind-induced aero-elastic effects of tall buildings by wind tunnel test using a bi-axial forced vibration device	414-424
Jensen, Thomas Westergaard / Poulsen, Peter Noe / Cao Hoang, Linh	Layer model for finite element limit analysis of concrete slabs with shear reinforcement	51-61
Yang, Yan / Nakamura, Shozo / Chen, Baochun / Nishikawa, Takafumi	Mechanical behavior of Chinese woven timber arch bridges	340-357
Wilson, Alex W. / Motter, Christopher J. / Phillips, Adam R. / Daniel Dolan, J.	Modeling techniques for post-tensioned cross-laminated timber rocking walls	299-308
Kim, Wooram	A new family of two-stage explicit time integration methods with dissipation control capability for structural dynamics	358-372
Sung, Deokyong / Chang, Seongkyu	Nonlinear behavior of rail fastening system on slab track at railway bridge ends: FEA and experimental study	84-95
Zhang, Xiantao / Zheng, Siming / Lu, Da / Tian, Xinliang	Numerical investigation of the dynamic response and power capture performance of a VLFS with a wave energy conversion unit	62-83
Barredo, Eduardo / Mendoza Larios, J. G. / Mayén, Jan / Flores-Hernández, A. A. / Colín, Jorge / Arias Montiel, M.	Optimal design for high-performance passive dynamic vibration absorbers under random vibration	469-489
Ricci, Paolo / Di Domenico, Mariano / Verderame, Gerardo M.	Out-of-plane seismic safety assessment of URM infills accounting for the in-plane/out-of-plane interaction in a nonlinear static framework	96-112
Micheli, Laura / Alipour, Alice / Laflamme, Simon / Sarkar, Partha	Performance-based design with life-cycle cost assessment for damping systems integrated in wind excited tall buildings	438-451
Yaseen, Zaher Mundher / Keshtegar, Behrooz / Hwang, Hyeon-Jong / Nehdi, Moncef L.	Predicting reinforcing bar development length using polynomial chaos expansions	524-535
Yu, Zhiwei / Lu, Chen / Ma, Huihuan / Kong, Fan	Probabilistic seismic vulnerability assessment of aluminium alloy reticulated shells with consideration of uncertainty	288-298
Morán, Rafael / Toledo, Miguel A. / Larese, Antonia / Monteiro-Alves, Ricardo	A procedure to design toe protections for rockfill dams against extreme through-flows	400-412
Gazi, Hatice / Alhan, Cenk	Reliability of elastomeric-isolated buildings under historical earthquakes with/without forward-directivity effects	490-507
Gong, Changqing / Frangopol, Dan M. / Cheng, Minghui	Risk-based life-cycle optimal dry-docking inspection of corroding ship hull tankers	559-567
Guan, Minsheng / Liu, Wenting / Lai, Mianheng / Du, Hongbiao / Cui, Jie / Gan, Yangyu	Seismic behaviour of innovative composite walls with high-strength manufactured sand concrete	182-199
Cao, Xu-Yang / Feng, De-Cheng / Wu, Gang	Seismic performance upgrade of RC frame buildings using precast bolt-connected steel-plate reinforced concrete frame-braces	382-399
Faleschini, Flora / Zanini, Mariano Angelo / Toska, Klajdi	Seismic reliability assessment of code-conforming reinforced concrete buildings made with electric arc furnace slag aggregates	324-339
Rodriguez, Gerardo / Casas, Joan R. / Villalba, Sergi	Shear crack width assessment in concrete structures by 2D distributed optical fiber	508-523
Hasslinger, Patricia / Kurfürst, Aleš / Hammer, Thomas / Fischmeister, Edgar / Hellmich, Christian / Scheiner, Stefan	Shear stress concentrations in tramway rails: Results from beam theory-based cross-sectional 2D Finite Element analyses	579-590
Lee, A. Y. F. / Su, R. K. L. / Chan, Ricky W. K.	Structural behaviour of post-installed reinforcement bars in moment connections of wall-slabs	536-550
Gatti, Marco	Structural health monitoring of an operational bridge: A case study	200-209
Takase, Yuya	Testing and modeling of dowel action for a post-installed anchor subjected to combined shear force and tensile force	551-558
Skoulidou, Despoina / Romão, Xavier	Uncertainty quantification of fragility and risk estimates due to seismic input variability and capacity model uncertainty	425-437

About this
data sheet
IssueID
28415
Published on:
07/06/2019
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - September 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - September 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.