Engineering Structures - septembre 2019

Publié:	septembre 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Pourbehi, Mohammad S. / van Zijl, Gideon P. A. G. / Strasheim, J. A. vB.	Analysis of combined action of seismic loads and alkali-silica reaction in concrete dams considering the key chemical-physical-mechanical factors and fluid-structure interaction	263-273
Li, Fuhai / Feng, Zhihua / Deng, Kailai / Yu, Yongjiang / Hu, Zhiming / Jin, Hesong	Axial behavior of reinforced PP-ECC column and hybrid NSC-ECC column under compression	223-230
Jacques, Eric / Saatcioglu, Murat	Bond-slip modelling of reinforced concrete lap splices subjected to low and high strain rates	568-578
Zhang, Ruiyang / Phillips, Brian M. / Fernández-Cabán, Pedro L. / Masters, Forrest J.	Cyber-physical structural optimization using real-time hybrid simulation	113-124
Ou, Yu-Chen / Hoang, Le / Roh, Hwasung	Cyclic behavior of squat reinforced concrete walls with openings typical of exterior walls of row houses in Taiwan	231-242
Mojtabaei, Seyed Mohammad / Ye, Jun / Hajirasouliha, Iman	Development of optimum cold-formed steel beams for serviceability and ultimate limit states using Big Bang-Big Crunch optimisation	172-181
Farahani, D. / Behnamfar, F. / Sayyadpour, H.	Effect of pounding on nonlinear seismic response of torsionally coupled steel structures resting on flexible soil	243-262
Chen, Yong / Hu, Zhongzheng / Guo, Yong / Wang, Jiyang / Tong, Genshu / Liu, Qingsong / Pan, Yu	Effects of chord pre-load on strength of CHS X-joints stiffened with external ring stiffeners and gusset plates	125-143
Fan, Wei / Liu, Bin / Huang, Xu / Sun, Yang	Efficient modeling of flexural and shear behaviors in reinforced concrete beams and columns subjected to low-velocity impact loading	22-50
Mehrsoroush, Ali / Saiidi, M. Saiid	Experimental and analytical studies of base pipe pin connections under direct tension	210-222
Ma, Huihuan / Zhao, Yi / Fan, Feng / Yu, Zhiwei / Zhi, Xudong	Experimental and numerical study of new connection systems for a large-span hyperbolic steel cooling tower	452-468
Issa, Anas Salem / Shahria Alam, M.	Experimental and numerical study on the seismic performance of a self-centering bracing system using closed-loop dynamic (CLD) testing	144-158
Ma, Yuhong / Li, Yanmin / Zhao, Guifeng / Zhou, Fulin	Experimental research on the time-varying law of performance for natural rubber laminated bearings subjected to seawater dry-wet cycles	159-171
Zhang, Yanxia / Li, Quangang / Zhuge, Yan / Liu, Anran / Zhao, Wenzhan	Experimental study on spatial prefabricated self-centering steel frame with beam-column connections containing bolted web friction devices	1-21
Shao, Changjiang / Qi, Qiming / Wang, Meng / Xiao, Zhenghao / Wei, Wang / Hu, Chenxu / Xiao, Laichuan	Experimental study on the seismic performance of round-ended hollow piers	309-323
Hofmeister, Benedikt / Bruns, Marlene / Rolfes, Raimund	Finite element model updating using deterministic optimisation: A global pattern search approach	373-381
Peng, Jianxin / Xiao, Linfa / Zhang, Jianren / Cai, C. S. / Wang, Lei	Flexural behavior of corroded HPS beams	274-287
Song, Weiwei / Liang, Shuguo / Song, Jie / Zou, Lianghao / Hu, Gang	Investigation on wind-induced aero-elastic effects of tall buildings by wind tunnel test using a bi-axial forced vibration device	414-424
Jensen, Thomas Westergaard / Poulsen, Peter Noe / Cao Hoang, Linh	Layer model for finite element limit analysis of concrete slabs with shear reinforcement	51-61
Yang, Yan / Nakamura, Shozo / Chen, Baochun / Nishikawa, Takafumi	Mechanical behavior of Chinese woven timber arch bridges	340-357
Wilson, Alex W. / Motter, Christopher J. / Phillips, Adam R. / Daniel Dolan, J.	Modeling techniques for post-tensioned cross-laminated timber rocking walls	299-308
Kim, Wooram	A new family of two-stage explicit time integration methods with dissipation control capability for structural dynamics	358-372
Sung, Deokyong / Chang, Seongkyu	Nonlinear behavior of rail fastening system on slab track at railway bridge ends: FEA and experimental study	84-95
Zhang, Xiantao / Zheng, Siming / Lu, Da / Tian, Xinliang	Numerical investigation of the dynamic response and power capture performance of a VLFS with a wave energy conversion unit	62-83
Barredo, Eduardo / Mendoza Larios, J. G. / Mayén, Jan / Flores-Hernández, A. A. / Colín, Jorge / Arias Montiel, M.	Optimal design for high-performance passive dynamic vibration absorbers under random vibration	469-489
Ricci, Paolo / Di Domenico, Mariano / Verderame, Gerardo M.	Out-of-plane seismic safety assessment of URM infills accounting for the in-plane/out-of-plane interaction in a nonlinear static framework	96-112
Micheli, Laura / Alipour, Alice / Laflamme, Simon / Sarkar, Partha	Performance-based design with life-cycle cost assessment for damping systems integrated in wind excited tall buildings	438-451
Yaseen, Zaher Mundher / Keshtegar, Behrooz / Hwang, Hyeon-Jong / Nehdi, Moncef L.	Predicting reinforcing bar development length using polynomial chaos expansions	524-535
Yu, Zhiwei / Lu, Chen / Ma, Huihuan / Kong, Fan	Probabilistic seismic vulnerability assessment of aluminium alloy reticulated shells with consideration of uncertainty	288-298
Morán, Rafael / Toledo, Miguel A. / Larese, Antonia / Monteiro-Alves, Ricardo	A procedure to design toe protections for rockfill dams against extreme through-flows	400-412
Gazi, Hatice / Alhan, Cenk	Reliability of elastomeric-isolated buildings under historical earthquakes with/without forward-directivity effects	490-507
Gong, Changqing / Frangopol, Dan M. / Cheng, Minghui	Risk-based life-cycle optimal dry-docking inspection of corroding ship hull tankers	559-567
Guan, Minsheng / Liu, Wenting / Lai, Mianheng / Du, Hongbiao / Cui, Jie / Gan, Yangyu	Seismic behaviour of innovative composite walls with high-strength manufactured sand concrete	182-199
Cao, Xu-Yang / Feng, De-Cheng / Wu, Gang	Seismic performance upgrade of RC frame buildings using precast bolt-connected steel-plate reinforced concrete frame-braces	382-399
Faleschini, Flora / Zanini, Mariano Angelo / Toska, Klajdi	Seismic reliability assessment of code-conforming reinforced concrete buildings made with electric arc furnace slag aggregates	324-339
Rodriguez, Gerardo / Casas, Joan R. / Villalba, Sergi	Shear crack width assessment in concrete structures by 2D distributed optical fiber	508-523
Hasslinger, Patricia / Kurfürst, Aleš / Hammer, Thomas / Fischmeister, Edgar / Hellmich, Christian / Scheiner, Stefan	Shear stress concentrations in tramway rails: Results from beam theory-based cross-sectional 2D Finite Element analyses	579-590
Lee, A. Y. F. / Su, R. K. L. / Chan, Ricky W. K.	Structural behaviour of post-installed reinforcement bars in moment connections of wall-slabs	536-550
Gatti, Marco	Structural health monitoring of an operational bridge: A case study	200-209
Takase, Yuya	Testing and modeling of dowel action for a post-installed anchor subjected to combined shear force and tensile force	551-558
Skoulidou, Despoina / Romão, Xavier	Uncertainty quantification of fragility and risk estimates due to seismic input variability and capacity model uncertainty	425-437

Informations
sur cette fiche
IssueID
28415
Publié(e) le:
07.06.2019
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - septembre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - septembre 2019

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.