Engineering Structures - February 2019

Published:	February 2019

Articles in this Issue

Author(s)	Title	Page(s)
Minafò, Giovanni	Analytical modelling of force transmission in axially loaded RC columns with indirectly loaded jackets	15-26
Tóth, Máté / Bokor, Boglárka / Sharma, Akanshu	Anchorage in steel fiber reinforced concrete – concept, experimental evidence and design recommendations for concrete cone and concrete edge breakout failure modes	60-75
Zhao, Bi D. / Chen, Yu / Liu, Cheng Q. / Wu, Han D. / Wang, Tao / Wei, Xiao D.	An axial semi-rigid connection model for cross-type transverse branch plate-to-CHS joints	413-426
Abbas, Asim / Adil, Mohammad / Ahmad, Naveed / Ahmad, Izaz	Behavior of reinforced concrete sandwiched panels (RCSPs) under blast load	476-490
Wang, Mingqian / Song, Xiaobin / Gu, Xianglin / Tang, Jianyang	Bolted glulam beam-column connections under different combinations of shear and bending	281-292
Ansari, R. / Torabi, J. / Hassani, R.	A comprehensive study on the free vibration of arbitrary shaped thick functionally graded CNT-reinforced composite plates	653-669
Erdenebat, Dolgion / Waldmann, Danièle / Teferle, Norman	Curvature based DAD-method for damage localisation under consideration of measurement noise minimisation	293-309
Kim, Sung-Yong / Lee, Cheol-Ho	Description of asymmetric hysteretic behavior based on the Bouc-Wen model and piecewise linear strength-degradation functions	181-191
Xia, Yong-Qiang / Xiao, Nan / Chen, Hua-Peng / Qian, Xiao-Qian	Determination of static and kinematic determinacy of pin-jointed assemblies using rigid-body displacements as primary unknown variables	643-652
Ma, L. / Zhang, W. / Han, W. S. / Liu, J. X.	Determining the dynamic amplification factor of multi-span continuous box girder bridges in highways using vehicle-bridge interaction analyses	47-59
Hosseini, Ardalan / Ghafoori, Elyas / Motavalli, Masoud / Nussbaumer, Alain / Zhao, Xiao-Ling / Al-Mahaidi, Riadh / Terrasi, Giovanni	Development of prestressed unbonded and bonded CFRP strengthening solutions for tensile metallic members	550-561
Zhao, Wusheng / Chen, Weizhong / Yang, Diansen / Tan, Xianjun / Gao, Hou / Li, Can	Earthquake input mechanism for time-domain analysis of tunnels in layered ground subjected to obliquely incident P- and SV-waves	374-386
Glassman, Jonathan D. / Boyce, Veronica / Garlock, Maria E. Moreyra	Effectiveness of stiffeners on steel plate shear buckling at ambient and elevated temperatures	491-502
McCrum, Daniel P. / Simon, Jordan / Grimes, Michael / Broderick, Brian M. / Lim, James B. P. / Wrzesien, Andrzej M.	Experimental cyclic performance of cold-formed steel bolted moment resisting frames	1-14
Dai, Xiao-Meng / Zong, Liang / Ding, Yang / Li, Zhong-Xian	Experimental study on seismic behavior of a novel plug-in self-lock joint for modular steel construction	143-164
Huang, Zheng / Tu, Yongming / Meng, Shaoping / Sabau, Cristian / Popescu, Cosmin / Sas, Gabriel	Experimental study on shear deformation of reinforced concrete beams using digital image correlation	670-698
Cheng, X. X. / Ke, S. T. / Li, P. F. / Ge, Y. J. / Zhao, L.	External extreme wind pressure distribution for the structural design of cooling towers	336-353
Luo, Pengjun / Zhang, Qinghua / Bao, Yi / Bu, Yizhi	Fatigue performance of welded joint between thickened-edge U-rib and deck in orthotropic steel deck	699-710
Elbahy, Yamen Ibrahim / Youssef, Maged A.	Flexural behaviour of superelastic shape memory alloy reinforced concrete beams during loading and unloading stages	246-259
Michiels, Tim / Adriaenssens, Sigrid / Dejong, Matthew	Form finding of corrugated shell structures for seismic design and validation using non-linear pushover analysis	362-373
Sadeghian, Vahid / Kwon, Oh-Sung / Vecchio, Frank	A framework for multi-platform simulation of reinforced concrete structures	260-270
Yang, Bo / Zhang, Yue / Xiong, Gang / Elchalakani, Mohamed / Kang, Shao-Bo	Global buckling investigation on laterally-unrestrained Q460GJ steel beams under three-point bending	271-280
Gião, Rita / Lúcio, Válter / Chastre, Carlos	Gravity load effects on the behaviour of reinforced concrete beam critical zones subjected to cyclic loads	503-518
Al-Kamyani, Zahran / Guadagnini, Maurizio / Pilakoutas, Kypros	Impact of shrinkage on crack width and deflections of reinforced concrete beams with and without steel fibres	387-396
Li, Y. L. / Zhao, X. L. / Singh Raman, R. K.	Load-strain model for concrete-filled double-skin circular FRP tubes under axial compression	629-642
Pantò, B. / Silva, L. / Vasconcelos, G. / Lourenço, P. B.	Macro-modelling approach for assessment of out-of-plane behavior of brick masonry infill walls	529-549
Napolitano, Rebecca / Glisic, Branko	Methodology for diagnosing crack patterns in masonry structures using photogrammetry and distinct element modeling	519-528
Gong, Yongqiang / Cao, Liang / Laflamme, Simon / Ricles, James / Quiel, Spencer / Taylor, Douglas	Motion-based design approach for a novel variable friction cladding connection used in wind hazard mitigation	397-412
Zhang, Chunwei / Gholipour, Gholamreza / Mousavi, Asma Alsadat	Nonlinear dynamic behavior of simply-supported RC beams subjected to combined impact-blast loading	124-142
Karami, Kaveh / Manie, Salar / Ghafouri, Khatib / Nagarajaiah, Satish	Nonlinear structural control using integrated DDA/ISMP and semi-active tuned mass damper	589-604
Bedeir, Hassan / Shedid, Marwan / Okail, Hussein / Hamdy, Osama	Numerical modeling of a two story third-scale reinforced masonry shear wall building subjected to quasi-static lateral loading	310-323
Gomes, Guilherme Ferreira / Alves de Almeida, Fabricio / Junqueira, Diego Morais / da Cunha, Sebastião Simões / Ancelotti, Antônio Carlos	Optimized damage identification in CFRP plates by reduced mode shapes and GA-ANN methods	111-123
Maddio, P. D. / Meschini, A. / Sinatra, R. / Cammarata, A.	An optimized form-finding method of an asymmetric large deployable reflector	27-34
Blomfors, Mattias / Larsson Ivanov, Oskar / Honfi, Dániel / Engen, Morten	Partial safety factors for the anchorage capacity of corroded reinforcement bars in concrete	579-588
Luo, H. / Ikago, K. / Chong, C. / Keivan, A. / Phillips, B. M.	Performance of low-frequency structures incorporated with rate-independent linear damping	324-335
Matos, José C. / Moreira, Vicente N. / Valente, Isabel B. / Cruz, Paulo J. S. / Neves, Luís C. / Galvão, Neryvaldo	Probabilistic-based assessment of existing steel-concrete composite bridges – Application to Sousa River Bridge	95-110
Borković, A. / Kovačević, S. / Radenković, G. / Milovanović, S. / Majstorović, D.	Rotation-free isogeometric dynamic analysis of an arbitrarily curved plane Bernoulli-Euler beam	192-215
Guo, Wei / Zhai, Zhipeng / Cui, Yao / Yu, Zhiwu / Wu, Xiaoli	Seismic performance assessment of low-rise precast wall panel structure with bolt connections	562-578
Aliakbari, Fatemeh / Shariatmadar, Hashem	Seismic response modification factor for steel slit panel-frames	427-436
Rajput, Aditya Singh / Sharma, Umesh Kumar / Engineer, Kaizad	Seismic retrofitting of corroded RC columns using advanced composite materials	35-46
Lin, Youzhu / Yan, Jiachuan / Wang, Yonghui / Fan, Feng / Zou, Chaoying	Shear failure mechanisms of SCS sandwich beams considering bond-slip between steel plates and concrete	458-475
Chen, Yiyan / Dong, Jucan / Xu, Tianhua / Xiao, Yufeng / Jiang, Ruijuan / Nie, Xinmin	The shear-lag effect of composite box girder bridges with corrugated steel webs and trusses	617-628
Chai, Shengbo / Wang, Xiulan	Simplified calculation method for deformation of multi-tower cable-stayed bridges with crossed cables	354-361
Palacio-Betancur, Alejandro / Aristizabal-Ochoa, J. Dario	Statics, stability and vibration of non-prismatic linear beam-columns with semirigid connections on elastic foundation	89-94
Dizdar, Çağan / Baran, Eray / Topkaya, Cem	Strength and stiffness of floor trusses fabricated from cold-formed steel lipped channels	437-457
Jiang, Lei / Liu, Yongjian / Fam, Amir	Stress concentration factors in concrete-filled square hollow section joints with perfobond ribs	165-180
Bahtiar, Effendi Tri / Imanullah, Alif Puguh / Hermawan, Dede / Nugroho, Naresworo	Structural grading of three sympodial bamboo culms (Hitam, Andong, and Tali) subjected to axial compressive load	233-245
Feng, Kaixuan / Lu, Zhenzhou / Pang, Chao / Yun, Wanying	Time-dependent failure credibility analysis and its optimization based computational methods	605-616
Kueres, Dominik / Schmidt, Philipp / Hegger, Josef	Two-parameter kinematic theory for punching shear in reinforced concrete slabs with shear reinforcement	216-232
Chen, Yong / Hu, Zhongzheng / Guo, Yong / Wang, Jiyang / Dan, Hanbo / Liu, Qingsong / Pan, Yu	Ultimate bearing capacity of CHS X-joints stiffened with external ring stiffeners and gusset plates subjected to brace compression	76-88

About this
data sheet
IssueID
22355
Published on:
11/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - February 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - February 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.