Engineering Structures - Februar 2019

Erschienen:	Februar 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Minafò, Giovanni	Analytical modelling of force transmission in axially loaded RC columns with indirectly loaded jackets	15-26
Tóth, Máté / Bokor, Boglárka / Sharma, Akanshu	Anchorage in steel fiber reinforced concrete – concept, experimental evidence and design recommendations for concrete cone and concrete edge breakout failure modes	60-75
Zhao, Bi D. / Chen, Yu / Liu, Cheng Q. / Wu, Han D. / Wang, Tao / Wei, Xiao D.	An axial semi-rigid connection model for cross-type transverse branch plate-to-CHS joints	413-426
Abbas, Asim / Adil, Mohammad / Ahmad, Naveed / Ahmad, Izaz	Behavior of reinforced concrete sandwiched panels (RCSPs) under blast load	476-490
Wang, Mingqian / Song, Xiaobin / Gu, Xianglin / Tang, Jianyang	Bolted glulam beam-column connections under different combinations of shear and bending	281-292
Ansari, R. / Torabi, J. / Hassani, R.	A comprehensive study on the free vibration of arbitrary shaped thick functionally graded CNT-reinforced composite plates	653-669
Erdenebat, Dolgion / Waldmann, Danièle / Teferle, Norman	Curvature based DAD-method for damage localisation under consideration of measurement noise minimisation	293-309
Kim, Sung-Yong / Lee, Cheol-Ho	Description of asymmetric hysteretic behavior based on the Bouc-Wen model and piecewise linear strength-degradation functions	181-191
Xia, Yong-Qiang / Xiao, Nan / Chen, Hua-Peng / Qian, Xiao-Qian	Determination of static and kinematic determinacy of pin-jointed assemblies using rigid-body displacements as primary unknown variables	643-652
Ma, L. / Zhang, W. / Han, W. S. / Liu, J. X.	Determining the dynamic amplification factor of multi-span continuous box girder bridges in highways using vehicle-bridge interaction analyses	47-59
Hosseini, Ardalan / Ghafoori, Elyas / Motavalli, Masoud / Nussbaumer, Alain / Zhao, Xiao-Ling / Al-Mahaidi, Riadh / Terrasi, Giovanni	Development of prestressed unbonded and bonded CFRP strengthening solutions for tensile metallic members	550-561
Zhao, Wusheng / Chen, Weizhong / Yang, Diansen / Tan, Xianjun / Gao, Hou / Li, Can	Earthquake input mechanism for time-domain analysis of tunnels in layered ground subjected to obliquely incident P- and SV-waves	374-386
Glassman, Jonathan D. / Boyce, Veronica / Garlock, Maria E. Moreyra	Effectiveness of stiffeners on steel plate shear buckling at ambient and elevated temperatures	491-502
McCrum, Daniel P. / Simon, Jordan / Grimes, Michael / Broderick, Brian M. / Lim, James B. P. / Wrzesien, Andrzej M.	Experimental cyclic performance of cold-formed steel bolted moment resisting frames	1-14
Dai, Xiao-Meng / Zong, Liang / Ding, Yang / Li, Zhong-Xian	Experimental study on seismic behavior of a novel plug-in self-lock joint for modular steel construction	143-164
Huang, Zheng / Tu, Yongming / Meng, Shaoping / Sabau, Cristian / Popescu, Cosmin / Sas, Gabriel	Experimental study on shear deformation of reinforced concrete beams using digital image correlation	670-698
Cheng, X. X. / Ke, S. T. / Li, P. F. / Ge, Y. J. / Zhao, L.	External extreme wind pressure distribution for the structural design of cooling towers	336-353
Luo, Pengjun / Zhang, Qinghua / Bao, Yi / Bu, Yizhi	Fatigue performance of welded joint between thickened-edge U-rib and deck in orthotropic steel deck	699-710
Elbahy, Yamen Ibrahim / Youssef, Maged A.	Flexural behaviour of superelastic shape memory alloy reinforced concrete beams during loading and unloading stages	246-259
Michiels, Tim / Adriaenssens, Sigrid / Dejong, Matthew	Form finding of corrugated shell structures for seismic design and validation using non-linear pushover analysis	362-373
Sadeghian, Vahid / Kwon, Oh-Sung / Vecchio, Frank	A framework for multi-platform simulation of reinforced concrete structures	260-270
Yang, Bo / Zhang, Yue / Xiong, Gang / Elchalakani, Mohamed / Kang, Shao-Bo	Global buckling investigation on laterally-unrestrained Q460GJ steel beams under three-point bending	271-280
Gião, Rita / Lúcio, Válter / Chastre, Carlos	Gravity load effects on the behaviour of reinforced concrete beam critical zones subjected to cyclic loads	503-518
Al-Kamyani, Zahran / Guadagnini, Maurizio / Pilakoutas, Kypros	Impact of shrinkage on crack width and deflections of reinforced concrete beams with and without steel fibres	387-396
Li, Y. L. / Zhao, X. L. / Singh Raman, R. K.	Load-strain model for concrete-filled double-skin circular FRP tubes under axial compression	629-642
Pantò, B. / Silva, L. / Vasconcelos, G. / Lourenço, P. B.	Macro-modelling approach for assessment of out-of-plane behavior of brick masonry infill walls	529-549
Napolitano, Rebecca / Glisic, Branko	Methodology for diagnosing crack patterns in masonry structures using photogrammetry and distinct element modeling	519-528
Gong, Yongqiang / Cao, Liang / Laflamme, Simon / Ricles, James / Quiel, Spencer / Taylor, Douglas	Motion-based design approach for a novel variable friction cladding connection used in wind hazard mitigation	397-412
Zhang, Chunwei / Gholipour, Gholamreza / Mousavi, Asma Alsadat	Nonlinear dynamic behavior of simply-supported RC beams subjected to combined impact-blast loading	124-142
Karami, Kaveh / Manie, Salar / Ghafouri, Khatib / Nagarajaiah, Satish	Nonlinear structural control using integrated DDA/ISMP and semi-active tuned mass damper	589-604
Bedeir, Hassan / Shedid, Marwan / Okail, Hussein / Hamdy, Osama	Numerical modeling of a two story third-scale reinforced masonry shear wall building subjected to quasi-static lateral loading	310-323
Gomes, Guilherme Ferreira / Alves de Almeida, Fabricio / Junqueira, Diego Morais / da Cunha, Sebastião Simões / Ancelotti, Antônio Carlos	Optimized damage identification in CFRP plates by reduced mode shapes and GA-ANN methods	111-123
Maddio, P. D. / Meschini, A. / Sinatra, R. / Cammarata, A.	An optimized form-finding method of an asymmetric large deployable reflector	27-34
Blomfors, Mattias / Larsson Ivanov, Oskar / Honfi, Dániel / Engen, Morten	Partial safety factors for the anchorage capacity of corroded reinforcement bars in concrete	579-588
Luo, H. / Ikago, K. / Chong, C. / Keivan, A. / Phillips, B. M.	Performance of low-frequency structures incorporated with rate-independent linear damping	324-335
Matos, José C. / Moreira, Vicente N. / Valente, Isabel B. / Cruz, Paulo J. S. / Neves, Luís C. / Galvão, Neryvaldo	Probabilistic-based assessment of existing steel-concrete composite bridges – Application to Sousa River Bridge	95-110
Borković, A. / Kovačević, S. / Radenković, G. / Milovanović, S. / Majstorović, D.	Rotation-free isogeometric dynamic analysis of an arbitrarily curved plane Bernoulli-Euler beam	192-215
Guo, Wei / Zhai, Zhipeng / Cui, Yao / Yu, Zhiwu / Wu, Xiaoli	Seismic performance assessment of low-rise precast wall panel structure with bolt connections	562-578
Aliakbari, Fatemeh / Shariatmadar, Hashem	Seismic response modification factor for steel slit panel-frames	427-436
Rajput, Aditya Singh / Sharma, Umesh Kumar / Engineer, Kaizad	Seismic retrofitting of corroded RC columns using advanced composite materials	35-46
Lin, Youzhu / Yan, Jiachuan / Wang, Yonghui / Fan, Feng / Zou, Chaoying	Shear failure mechanisms of SCS sandwich beams considering bond-slip between steel plates and concrete	458-475
Chen, Yiyan / Dong, Jucan / Xu, Tianhua / Xiao, Yufeng / Jiang, Ruijuan / Nie, Xinmin	The shear-lag effect of composite box girder bridges with corrugated steel webs and trusses	617-628
Chai, Shengbo / Wang, Xiulan	Simplified calculation method for deformation of multi-tower cable-stayed bridges with crossed cables	354-361
Palacio-Betancur, Alejandro / Aristizabal-Ochoa, J. Dario	Statics, stability and vibration of non-prismatic linear beam-columns with semirigid connections on elastic foundation	89-94
Dizdar, Çağan / Baran, Eray / Topkaya, Cem	Strength and stiffness of floor trusses fabricated from cold-formed steel lipped channels	437-457
Jiang, Lei / Liu, Yongjian / Fam, Amir	Stress concentration factors in concrete-filled square hollow section joints with perfobond ribs	165-180
Bahtiar, Effendi Tri / Imanullah, Alif Puguh / Hermawan, Dede / Nugroho, Naresworo	Structural grading of three sympodial bamboo culms (Hitam, Andong, and Tali) subjected to axial compressive load	233-245
Feng, Kaixuan / Lu, Zhenzhou / Pang, Chao / Yun, Wanying	Time-dependent failure credibility analysis and its optimization based computational methods	605-616
Kueres, Dominik / Schmidt, Philipp / Hegger, Josef	Two-parameter kinematic theory for punching shear in reinforced concrete slabs with shear reinforcement	216-232
Chen, Yong / Hu, Zhongzheng / Guo, Yong / Wang, Jiyang / Dan, Hanbo / Liu, Qingsong / Pan, Yu	Ultimate bearing capacity of CHS X-joints stiffened with external ring stiffeners and gusset plates subjected to brace compression	76-88

Über diese
Datenseite
IssueID
22355
Veröffentlicht am:
11.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.