Engineering Structures - August 2018

Published:	August 2018

Articles in this Issue

Author(s)	Title	Page(s)
Silwal, Baikuntha / Ozbulut, Osman E.	Aftershock fragility assessment of steel moment frames with self-centering dampers	12-22
Ding, Ran / Tao, Mu-Xuan / Nie, Xin / Mo, Y. L.	Analytical model for seismic simulation of reinforced concrete coupled shear walls	819-837
Wang, Zhenkui / van der Heijden, G. H. M. / Tang, Yougang	Analytical study of third-mode lateral thermal buckling for unburied subsea pipelines with sleeper	447-461
Casagrande, Daniele / Giongo, Ivan / Pederzolli, Federico / Franciosi, Alessandro / Piazza, Maurizio	Analytical, numerical and experimental assessment of vibration performance in timber floors	748-758
Baran, Ismet / Warnet, Laurent L. / Akkerman, Remko	Assessment of failure and cohesive zone length in co-consolidated hybrid C/PEKK butt joint	420-430
Sullivan, Kyle / Miller, Thomas H. / Gupta, Rakesh	Behavior of cross-laminated timber diaphragm connections with self-tapping screws	505-524
Guo, Rui / Pan, Yi / Cai, Lianheng / Hino, Shinichi	Bonding behavior of CFRP grid-concrete with PCM shotcrete	333-345
Bedon, Chiara / Amadio, Claudio	Buckling analysis and design proposal for 2-side supported double Insulated Glass Units (IGUs) in compression	23-34
Campione, G. / Cannella, F. / Ferrotto, M. F. / Gianquinto, M.	Compressive behavior of FRP externally wrapped R.C. column with buckling effects of longitudinal bars	809-818
Hossain, Afrin / Popovski, Marjan / Tannert, Thomas	Cross-laminated timber connections assembled with a combination of screws in withdrawal and screws in shear	1-11
Cortés-Puentes, Leonardo / Zaidi, Mohammed / Palermo, Dan / Dragomirescu, Elena	Cyclic loading testing of repaired SMA and steel reinforced concrete shear walls	128-141
Fu, Ji-Yang / Wu, Ben-Gang / Wu, Jiu-Rong / Deng, Ting / Pi, Yong-Lin / Xie, Zhuang-Ning	Design sensitivity analysis for optimal design of geometrically nonlinear lattice structures	915-928
Andreotti, G. / Graziotti, F. / Magenes, G.	Detailed micro-modelling of the direct shear tests of brick masonry specimens: The role of dilatancy	929-949
Ye, Zhiwen / Zhang, Weiping / Gu, Xianglin	Deterioration of shear behavior of corroded reinforced concrete beams	708-720
Braccesi, C. / Cianetti, F.	Development of a procedure for the structural design of roller coaster structures: The supporting structures	643-652
Lu, Yang / Hajirasouliha, Iman / Marshall, Alec M.	Direct displacement-based seismic design of flexible-base structures subjected to pulse-like ground motions	276-289
Cannizzaro, F. / Pantò, B. / Caddemi, S. / Caliò, I.	A Discrete Macro-Element Method (DMEM) for the nonlinear structural assessment of masonry arches	243-256
Teixeira, M. M. / Bernardo, L. F. A.	Ductility of RC beams under torsion	759-769
Gonilha, José A. / Correia, João R. / Branco, Fernando A. / Sena-Cruz, José	Durability of GFRP-concrete adhesively bonded connections: Experimental and numerical studies	784-798
Cai, Jian / Ye, Jia-Bin / Chen, Qing-Jun / Liu, Xinpei / Wang, Yong-Qi	Dynamic behaviour of axially-loaded RC columns under horizontal impact loading	684-697
Acikgoz, Sinan / DeJong, Matthew J. / Kechavarzi, Cedric / Soga, Kenichi	Dynamic response of a damaged masonry rail viaduct: Measurement and interpretation	544-558
Hu, Biao / Wu, Yu-Fei	Effect of shear span-to-depth ratio on shear strength components of RC beams	770-783
Yao, Shujian / Zhang, Duo / Lu, Zhaijun / Lin, Yuliang / Lu, Fangyun	Experimental and numerical investigation on the dynamic response of steel chamber under internal blast	877-888
Guan, Zhongguo / Chen, Xu / Li, Jianzhong	Experimental investigation of the seismic performance of bridge models with conventional and rocking pile group foundations	889-902
Mou, Ben / Bai, Yongtao	Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone	487-504
Tankova, Trayana / Martins, João Pedro / da Silva, Luís Simões / Marques, Liliana / Craveiro, Hélder D. / Santiago, Aldina	Experimental lateral-torsional buckling behaviour of web tapered I-section steel beams	355-370
Spathelf, C. A. / Vogel, T.	Fatigue performance of orthogonally reinforced concrete slabs: Experimental investigation	69-81
Rojob, Hothifa / El-Hacha, Raafat	Fatigue performance of RC beams strengthened with self-prestressed iron-based shape memory alloys	35-43
Titirla, Magdalini D. / Papadopoulos, Panikos K. / Doudoumis, Ioannis N.	Finite element modelling of an innovative passive energy dissipation device for seismic hazard mitigation	218-228
Le, Tan D. / Pham, Thong M. / Hao, Hong / Hao, Yifei	Flexural behaviour of precast segmental concrete beams internally prestressed with unbonded CFRP tendons under four-point loading	371-383
Shan, Z. W. / Su, R. K. L.	Flexural capacity model for RC beams strengthened with bolted side-plates incorporating both partial longitudinal and transverse interactions	44-57
Follesa, M. / Fragiacomo, M.	Force-based seismic design of mixed CLT/Light-Frame buildings	628-642
Baghi, Hadi / Menkulasi, Fatmir / Montes, Carlos / Sandrock, Jean Paul / Gomez, Sergio	Four high performance nonproprietary concrete deck configurations for movable bridges	559-575
Hassan, Emad M. / Mahmoud, Hussam	A framework for estimating immediate interdependent functionality reduction of a steel hospital following a seismic event	669-683
Wang, Hao / Wu, Minger	Global shape optimization of free-form cable-stiffened latticed shell based on local optimal solutions	576-588
Ruocco, E. / Zhang, H. / Wang, C. M.	Hencky bar-net model for buckling and vibration analyses of rectangular plates with non-uniform thickness	653-668
Hou, Hetao / Fu, Weiqi / Wang, Wei / Qu, Bing / Chen, Yiyi / Chen, Yueshi / Qiu, Canxing	Horizontal seismic force demands on nonstructural components in low-rise steel building frames with tension-only braces	852-864
Mohammed, A. S. / Pavic, A. / Racic, V.	Improved model for human induced vibrations of high-frequency floors	950-966
De Risi, Maria Teresa / Del Gaudio, Carlo / Ricci, Paolo / Verderame, Gerardo Mario	In-plane behaviour and damage assessment of masonry infills with hollow clay bricks in RC frames	257-275
Forgács, Tamás / Sarhosis, Vasilis / Bagi, Katalin	Influence of construction method on the load bearing capacity of skew masonry arches	612-627
Kamil, Ghanim Mohammed / Liang, Qing Quan / Hadi, Muhammad N. S.	Local buckling of steel plates in concrete-filled steel tubular columns at elevated temperatures	108-118
Zeng, Qing / Stoura, Charikleia D. / Dimitrakopoulos, Elias G.	A localized lagrange multipliers approach for the problem of vehicle-bridge-interaction	82-92
Keo, Pisey / Le Gac, Benoit / Somja, Hugues / Palas, Frank	Low-cycle fatigue life of a thermal break system under climatic actions	525-543
Lu, Xinzheng / Lin, Kaiqi / Li, Chenfeng / Li, Yi	New analytical calculation models for compressive arch action in reinforced concrete structures	721-735
Follesa, M. / Fragiacomo, M. / Casagrande, D. / Tomasi, R. / Piazza, M. / Vassallo, D. / Canetti, D. / Rossi, S.	The new provisions for the seismic design of timber buildings in Europe	736-747
Ghaemmaghami, Amir Reza / Kwon, Oh-Sung	Nonlinear modeling of MDOF structures equipped with viscoelastic dampers with strain, temperature and frequency-dependent properties	903-914
Woloszyk, K. / Kahsin, M. / Garbatov, Y.	Numerical assessment of ultimate strength of severe corroded stiffened plates	346-354
Liang, Qing Quan	Numerical simulation of high strength circular double-skin concrete-filled steel tubular slender columns	205-217
Seo, Hyunsu / Kim, Jinsup / Kwon, Minho	Optimal seismic retrofitted RC column distribution for an existing school building	399-404
Gombeda, Matthew J. / Naito, Clay J. / Quiel, Spencer E.	Performance-based framework for evaluating the flexural response of precast concrete wall panels to blast loading	473-486
Allegrini, Jonas / Maesschalck, Jan / Alessi, Giacomo / Glabeke, Gertjan / Christophe, Julien / van Beeck, Jeroen	Porous and geometry-resolved CFD modelling of a lattice transmission tower validated by drag force and flow field measurements	462-472
Ni, Shuna / Birely, Anna C.	Post-fire seismic behavior of reinforced concrete structural walls	163-178
Dias, Yomal / Keerthan, Poologanathan / Mahendran, Mahen	Predicting the fire performance of LSF walls made of web stiffened channel sections	320-332
Zhao, Zheng / Zhang, Bei / Zhou, Jiannan / Chen, Hailong / Wang, Bo / Zhou, Yinzhi / Xu, Ying / Jin, Fengnian / Fan, Hualin	Quasi-far-field blast responses of hierarchical orthogrid-stiffened sheet molding compound (SMC) protective door structures	431-446
Thomas, R. J. / Steel, Kylie / Sorensen, Andrew D.	Reliability analysis of circular reinforced concrete columns subject to sequential vehicular impact and blast loading	838-851
Kamjoo, Vahid / Eamon, Christopher D.	Reliability-based design optimization of a vehicular live load model	799-808
Kameshwar, Sabarethinam / Padgett, Jamie E.	Response and fragility assessment of bridge columns subjected to barge-bridge collision and scour	308-319
Tidemann, Lasse / Krenk, Steen	A robust frame element with cyclic plasticity and local joint effects	191-204
O'Reilly, Gerard J. / Perrone, Daniele / Fox, Matthew / Monteiro, Ricardo / Filiatrault, Andre	Seismic assessment and loss estimation of existing school buildings in Italy	142-162
Ren, Fengming / Chen, Jinwen / Chen, Guangming / Guo, Yaxin / Jiang, Tao	Seismic behavior of composite shear walls incorporating concrete-filled steel and FRP tubes as boundary elements	405-419
Momenzadeh, Seyedbabak / Shen, Jay	Seismic demand on columns in special concentrically braced frames	93-107
Martín-Gutiérrez, E. / Estévez-Cimadevila, J. / Otero-Chans, D. / Suárez-Riestra, F.	Self-tensioning long-span T-shaped spruce and oak web floors with a CLT upper flange. An experimental approach	300-307
McMahon, Joshua A. / Birely, Anna C.	Service performance of steel fiber reinforced concrete (SFRC) slabs	58-68
Mészöly, Tamás / Randl, Norbert	Shear behavior of fiber-reinforced ultra-high performance concrete beams	119-127
Tung, Nguyen Duc / Tue, Nguyen Viet	Shear resistance of steel fiber-reinforced concrete beams without conventional shear reinforcement on the basis of the critical shear band concept	698-707
Carrillo, Julian / Vargas, Diego / Sánchez, Martha	Stiffness degradation model of thin and lightly reinforced concrete walls for housing	179-190
Zhou, Yang / Duan, Menglan / Ma, Jianmin / Sun, Guomin	Theoretical analysis of reinforcement layers in bonded flexible marine hose under internal pressure	384-398
Yang, Guotao / Bradford, Mark A.	Thermal-induced upheaval buckling of continuously-reinforced semi-infinite concrete pavements	865-876
Jaimes, Miguel A. / Candia, Gabriel	Toppling of rigid electric equipment during earthquakes	229-242
Epackachi, Siamak / Whittaker, Andrew S.	A validated numerical model for predicting the in-plane seismic response of lightly reinforced, low-aspect ratio reinforced concrete shear walls	589-611
Park, ByungJin / Lee, YongJae / Park, MinJae / Ju, Young K.	Vibration control of a structure by a tuned liquid column damper with embossments	290-299

About this
data sheet
IssueID
18050
Published on:
01/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - August 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - August 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.