Engineering Structures - August 2018

Erschienen:	August 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Silwal, Baikuntha / Ozbulut, Osman E.	Aftershock fragility assessment of steel moment frames with self-centering dampers	12-22
Ding, Ran / Tao, Mu-Xuan / Nie, Xin / Mo, Y. L.	Analytical model for seismic simulation of reinforced concrete coupled shear walls	819-837
Wang, Zhenkui / van der Heijden, G. H. M. / Tang, Yougang	Analytical study of third-mode lateral thermal buckling for unburied subsea pipelines with sleeper	447-461
Casagrande, Daniele / Giongo, Ivan / Pederzolli, Federico / Franciosi, Alessandro / Piazza, Maurizio	Analytical, numerical and experimental assessment of vibration performance in timber floors	748-758
Baran, Ismet / Warnet, Laurent L. / Akkerman, Remko	Assessment of failure and cohesive zone length in co-consolidated hybrid C/PEKK butt joint	420-430
Sullivan, Kyle / Miller, Thomas H. / Gupta, Rakesh	Behavior of cross-laminated timber diaphragm connections with self-tapping screws	505-524
Guo, Rui / Pan, Yi / Cai, Lianheng / Hino, Shinichi	Bonding behavior of CFRP grid-concrete with PCM shotcrete	333-345
Bedon, Chiara / Amadio, Claudio	Buckling analysis and design proposal for 2-side supported double Insulated Glass Units (IGUs) in compression	23-34
Campione, G. / Cannella, F. / Ferrotto, M. F. / Gianquinto, M.	Compressive behavior of FRP externally wrapped R.C. column with buckling effects of longitudinal bars	809-818
Hossain, Afrin / Popovski, Marjan / Tannert, Thomas	Cross-laminated timber connections assembled with a combination of screws in withdrawal and screws in shear	1-11
Cortés-Puentes, Leonardo / Zaidi, Mohammed / Palermo, Dan / Dragomirescu, Elena	Cyclic loading testing of repaired SMA and steel reinforced concrete shear walls	128-141
Fu, Ji-Yang / Wu, Ben-Gang / Wu, Jiu-Rong / Deng, Ting / Pi, Yong-Lin / Xie, Zhuang-Ning	Design sensitivity analysis for optimal design of geometrically nonlinear lattice structures	915-928
Andreotti, G. / Graziotti, F. / Magenes, G.	Detailed micro-modelling of the direct shear tests of brick masonry specimens: The role of dilatancy	929-949
Ye, Zhiwen / Zhang, Weiping / Gu, Xianglin	Deterioration of shear behavior of corroded reinforced concrete beams	708-720
Braccesi, C. / Cianetti, F.	Development of a procedure for the structural design of roller coaster structures: The supporting structures	643-652
Lu, Yang / Hajirasouliha, Iman / Marshall, Alec M.	Direct displacement-based seismic design of flexible-base structures subjected to pulse-like ground motions	276-289
Cannizzaro, F. / Pantò, B. / Caddemi, S. / Caliò, I.	A Discrete Macro-Element Method (DMEM) for the nonlinear structural assessment of masonry arches	243-256
Teixeira, M. M. / Bernardo, L. F. A.	Ductility of RC beams under torsion	759-769
Gonilha, José A. / Correia, João R. / Branco, Fernando A. / Sena-Cruz, José	Durability of GFRP-concrete adhesively bonded connections: Experimental and numerical studies	784-798
Cai, Jian / Ye, Jia-Bin / Chen, Qing-Jun / Liu, Xinpei / Wang, Yong-Qi	Dynamic behaviour of axially-loaded RC columns under horizontal impact loading	684-697
Acikgoz, Sinan / DeJong, Matthew J. / Kechavarzi, Cedric / Soga, Kenichi	Dynamic response of a damaged masonry rail viaduct: Measurement and interpretation	544-558
Hu, Biao / Wu, Yu-Fei	Effect of shear span-to-depth ratio on shear strength components of RC beams	770-783
Yao, Shujian / Zhang, Duo / Lu, Zhaijun / Lin, Yuliang / Lu, Fangyun	Experimental and numerical investigation on the dynamic response of steel chamber under internal blast	877-888
Guan, Zhongguo / Chen, Xu / Li, Jianzhong	Experimental investigation of the seismic performance of bridge models with conventional and rocking pile group foundations	889-902
Mou, Ben / Bai, Yongtao	Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone	487-504
Tankova, Trayana / Martins, João Pedro / da Silva, Luís Simões / Marques, Liliana / Craveiro, Hélder D. / Santiago, Aldina	Experimental lateral-torsional buckling behaviour of web tapered I-section steel beams	355-370
Spathelf, C. A. / Vogel, T.	Fatigue performance of orthogonally reinforced concrete slabs: Experimental investigation	69-81
Rojob, Hothifa / El-Hacha, Raafat	Fatigue performance of RC beams strengthened with self-prestressed iron-based shape memory alloys	35-43
Titirla, Magdalini D. / Papadopoulos, Panikos K. / Doudoumis, Ioannis N.	Finite element modelling of an innovative passive energy dissipation device for seismic hazard mitigation	218-228
Le, Tan D. / Pham, Thong M. / Hao, Hong / Hao, Yifei	Flexural behaviour of precast segmental concrete beams internally prestressed with unbonded CFRP tendons under four-point loading	371-383
Shan, Z. W. / Su, R. K. L.	Flexural capacity model for RC beams strengthened with bolted side-plates incorporating both partial longitudinal and transverse interactions	44-57
Follesa, M. / Fragiacomo, M.	Force-based seismic design of mixed CLT/Light-Frame buildings	628-642
Baghi, Hadi / Menkulasi, Fatmir / Montes, Carlos / Sandrock, Jean Paul / Gomez, Sergio	Four high performance nonproprietary concrete deck configurations for movable bridges	559-575
Hassan, Emad M. / Mahmoud, Hussam	A framework for estimating immediate interdependent functionality reduction of a steel hospital following a seismic event	669-683
Wang, Hao / Wu, Minger	Global shape optimization of free-form cable-stiffened latticed shell based on local optimal solutions	576-588
Ruocco, E. / Zhang, H. / Wang, C. M.	Hencky bar-net model for buckling and vibration analyses of rectangular plates with non-uniform thickness	653-668
Hou, Hetao / Fu, Weiqi / Wang, Wei / Qu, Bing / Chen, Yiyi / Chen, Yueshi / Qiu, Canxing	Horizontal seismic force demands on nonstructural components in low-rise steel building frames with tension-only braces	852-864
Mohammed, A. S. / Pavic, A. / Racic, V.	Improved model for human induced vibrations of high-frequency floors	950-966
De Risi, Maria Teresa / Del Gaudio, Carlo / Ricci, Paolo / Verderame, Gerardo Mario	In-plane behaviour and damage assessment of masonry infills with hollow clay bricks in RC frames	257-275
Forgács, Tamás / Sarhosis, Vasilis / Bagi, Katalin	Influence of construction method on the load bearing capacity of skew masonry arches	612-627
Kamil, Ghanim Mohammed / Liang, Qing Quan / Hadi, Muhammad N. S.	Local buckling of steel plates in concrete-filled steel tubular columns at elevated temperatures	108-118
Zeng, Qing / Stoura, Charikleia D. / Dimitrakopoulos, Elias G.	A localized lagrange multipliers approach for the problem of vehicle-bridge-interaction	82-92
Keo, Pisey / Le Gac, Benoit / Somja, Hugues / Palas, Frank	Low-cycle fatigue life of a thermal break system under climatic actions	525-543
Lu, Xinzheng / Lin, Kaiqi / Li, Chenfeng / Li, Yi	New analytical calculation models for compressive arch action in reinforced concrete structures	721-735
Follesa, M. / Fragiacomo, M. / Casagrande, D. / Tomasi, R. / Piazza, M. / Vassallo, D. / Canetti, D. / Rossi, S.	The new provisions for the seismic design of timber buildings in Europe	736-747
Ghaemmaghami, Amir Reza / Kwon, Oh-Sung	Nonlinear modeling of MDOF structures equipped with viscoelastic dampers with strain, temperature and frequency-dependent properties	903-914
Woloszyk, K. / Kahsin, M. / Garbatov, Y.	Numerical assessment of ultimate strength of severe corroded stiffened plates	346-354
Liang, Qing Quan	Numerical simulation of high strength circular double-skin concrete-filled steel tubular slender columns	205-217
Seo, Hyunsu / Kim, Jinsup / Kwon, Minho	Optimal seismic retrofitted RC column distribution for an existing school building	399-404
Gombeda, Matthew J. / Naito, Clay J. / Quiel, Spencer E.	Performance-based framework for evaluating the flexural response of precast concrete wall panels to blast loading	473-486
Allegrini, Jonas / Maesschalck, Jan / Alessi, Giacomo / Glabeke, Gertjan / Christophe, Julien / van Beeck, Jeroen	Porous and geometry-resolved CFD modelling of a lattice transmission tower validated by drag force and flow field measurements	462-472
Ni, Shuna / Birely, Anna C.	Post-fire seismic behavior of reinforced concrete structural walls	163-178
Dias, Yomal / Keerthan, Poologanathan / Mahendran, Mahen	Predicting the fire performance of LSF walls made of web stiffened channel sections	320-332
Zhao, Zheng / Zhang, Bei / Zhou, Jiannan / Chen, Hailong / Wang, Bo / Zhou, Yinzhi / Xu, Ying / Jin, Fengnian / Fan, Hualin	Quasi-far-field blast responses of hierarchical orthogrid-stiffened sheet molding compound (SMC) protective door structures	431-446
Thomas, R. J. / Steel, Kylie / Sorensen, Andrew D.	Reliability analysis of circular reinforced concrete columns subject to sequential vehicular impact and blast loading	838-851
Kamjoo, Vahid / Eamon, Christopher D.	Reliability-based design optimization of a vehicular live load model	799-808
Kameshwar, Sabarethinam / Padgett, Jamie E.	Response and fragility assessment of bridge columns subjected to barge-bridge collision and scour	308-319
Tidemann, Lasse / Krenk, Steen	A robust frame element with cyclic plasticity and local joint effects	191-204
O'Reilly, Gerard J. / Perrone, Daniele / Fox, Matthew / Monteiro, Ricardo / Filiatrault, Andre	Seismic assessment and loss estimation of existing school buildings in Italy	142-162
Ren, Fengming / Chen, Jinwen / Chen, Guangming / Guo, Yaxin / Jiang, Tao	Seismic behavior of composite shear walls incorporating concrete-filled steel and FRP tubes as boundary elements	405-419
Momenzadeh, Seyedbabak / Shen, Jay	Seismic demand on columns in special concentrically braced frames	93-107
Martín-Gutiérrez, E. / Estévez-Cimadevila, J. / Otero-Chans, D. / Suárez-Riestra, F.	Self-tensioning long-span T-shaped spruce and oak web floors with a CLT upper flange. An experimental approach	300-307
McMahon, Joshua A. / Birely, Anna C.	Service performance of steel fiber reinforced concrete (SFRC) slabs	58-68
Mészöly, Tamás / Randl, Norbert	Shear behavior of fiber-reinforced ultra-high performance concrete beams	119-127
Tung, Nguyen Duc / Tue, Nguyen Viet	Shear resistance of steel fiber-reinforced concrete beams without conventional shear reinforcement on the basis of the critical shear band concept	698-707
Carrillo, Julian / Vargas, Diego / Sánchez, Martha	Stiffness degradation model of thin and lightly reinforced concrete walls for housing	179-190
Zhou, Yang / Duan, Menglan / Ma, Jianmin / Sun, Guomin	Theoretical analysis of reinforcement layers in bonded flexible marine hose under internal pressure	384-398
Yang, Guotao / Bradford, Mark A.	Thermal-induced upheaval buckling of continuously-reinforced semi-infinite concrete pavements	865-876
Jaimes, Miguel A. / Candia, Gabriel	Toppling of rigid electric equipment during earthquakes	229-242
Epackachi, Siamak / Whittaker, Andrew S.	A validated numerical model for predicting the in-plane seismic response of lightly reinforced, low-aspect ratio reinforced concrete shear walls	589-611
Park, ByungJin / Lee, YongJae / Park, MinJae / Ju, Young K.	Vibration control of a structure by a tuned liquid column damper with embossments	290-299

Über diese
Datenseite
IssueID
18050
Veröffentlicht am:
01.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - August 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - August 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.