Engineering Structures - September 2015

Published:	September 2015

Articles in this Issue

Author(s)	Title	Page(s)
Arcidiacono, Vincenzo / Cimellaro, Gian Paolo / Ochsendorf, John A.	Analysis of the failure mechanisms of the basilica of Santa Maria di Collemaggio during 2009 L'Aquila earthquake	502-516
Harvey, P. Scott / Gavin, Henri P.	Assessment of a rolling isolation system using reduced order structural models	708-725
Kwan, A. K. H. / Dong, C. X. / Ho, J. C. M.	Axial and lateral stress–strain model for FRP confined concrete	285-295
Tripura, Deb Dulal / Singh, Konjengbam Darunkumar	Axial load-capacity of rectangular cement stabilized rammed earth column	402-412
Hosinieh, Milad Mohammadi / Aoude, Hassan / Cook, William D. / Mitchell, Denis	Behavior of ultra-high performance fiber reinforced concrete columns under pure axial loading	388-401
Li, Huile / Xia, He / Soliman, Mohamed / Frangopol, Dan M.	Bridge stress calculation based on the dynamic response of coupled train–bridge system	334-345
Martínez-Rodrigo, M. D. / Filiatrault, A.	A case study on the application of passive control and seismic isolation techniques to cable-stayed bridges: A comparative investigation through non-linear dynamic analyses	232-252
Basu, Dhiman / Whittaker, Andrew S. / Constantinou, Michael C.	Characterizing rotational components of earthquake ground motion using a surface distribution method and response of sample structures	685-707
Ma, Y. S. / Wang, Y. F.	Creep influence on structural dynamic reliability	1-8
Franco, Annalisa / Royer-Carfagni, Gianni	Critical issues in the design-by-testing of annealed glass components	108-119
Anžlin, Andrej / Fischinger, Matej / Isakovic, Tatjana	Cyclic response of I-shaped bridge columns with substandard transverse reinforcement	642-652
Aboshosha, Haitham / El Damatty, Ashraf	Engineering method for estimating the reactions of transmission line conductors under downburst winds	272-284
Hwang, Jae-Seung / Lee, Sang-Hyun / Kareem, Ahsan	Estimation of modal masses of a structure with a mass-type damping device	149-156
Zhang, B. / Teng, J. G. / Yu, T.	Experimental behavior of hybrid FRP–concrete–steel double-skin tubular columns under combined axial compression and cyclic lateral loading	214-231
Russell, J. M. / Owen, J. S. / Hajirasouliha, I.	Experimental investigation on the dynamic response of RC flat slabs after a sudden column loss	28-41
Ataei, Abdolreza / Bradford, Mark A. / Valipour, Hamid R.	Experimental study of flush end plate beam-to-CFST column composite joints with deconstructable bolted shear connectors	616-630
Fantilli, Alessandro P. / Cavallo, Alessio D. / Pistone, Giuseppe	Fiber-reinforced lightweight concrete slabs for the maintenance of the Soleri Viaduct	184-191
Taig, Gerard / Ranzi, Gianluca	Generalised Beam Theory (GBT) for composite beams with partial shear interaction	582-602
Shi, H. / Salim, H.	Geometric nonlinear static and dynamic analysis of guyed towers using fully nonlinear element formulations	492-501
Neto, P. / Alfaiate, J. / Valarinho, L. / Correia, J. R. / Branco, F. A. / Vinagre, J.	Glass beams reinforced with GFRP laminates: Experimental tests and numerical modelling using a discrete strong discontinuity approach	253-263
Keerthan, Poologanathan / Mahendran, Mahen	Improved shear design rules of cold-formed steel beams	603-615
Martinović, S. / Vlahović, M. / Stević, Z. / Volkov Husović, T.	Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete	462-467
Elsouri, A. M. / Harajli, M. H.	Interior RC wide beam-narrow column joints: Potential for improving seismic resistance	42-55
Liu, Chang / Tan, Kang Hai / Fung, Tat Ching	Investigations of nonlinear dynamic performance of top-and-seat with web angle connections subjected to sudden column removal	449-461
Mohri, Foudil / Meftah, Sid Ahmed / Damil, Noureddine	A large torsion beam finite element model for tapered thin-walled open cross sections beams	132-148
Idehara, Sérgio Junichi / Dias Junior, Milton	Modal analysis of structures under non-stationary excitation	56-62
Nicolaides, D. / Markou, G.	Modelling the flexural behaviour of fibre reinforced concrete beams with FEM	653-665
Segal, Edward M. / Rhode-Barbarigos, Landolf / Adriaenssens, Sigrid / Filomeno Coelho, Rajan D.	Multi-objective optimization of polyester-rope and steel-rope suspended footbridges	559-567
Lee, Chang-Hwan / Ju, Young K. / Min, Jeong-Ki / Lho, Seung-Hee / Kim, Sang-Dae	Non-uniform steel strip dampers subjected to cyclic loadings	192-204
Mandal, Kalyan Kumar / Maity, Damodar	Nonlinear finite element analysis of elastic water storage tanks	666-676
de Miranda, S. / Patruno, L. / Ricci, M. / Ubertini, F.	Numerical study of a twin box bridge deck with increasing gap ratio by using RANS and LES approaches	546-558
Wang, Zhe / Chen, Zhihua / Liu, Hongbo	Numerical study on upheaval buckling of pipe-in-pipe systems with full contact imperfections	264-271
Alegria Mira, L. / Filomeno Coelho, R. / Thrall, A. P. / De Temmerman, N.	Parametric evaluation of deployable scissor arches	479-491
Shirmohammadi, Fatemeh / Esmaeily, Asad	Performance of reinforced concrete columns under bi-axial lateral force/displacement and axial load	63-77
Fang, Cheng / Yam, Michael C. H. / Zhou, Xiaoyi / Zhang, Yanyang	Post-buckling resistance of gusset plate connections: Behaviour, strength, and design considerations	9-27
Bosco, Melina / Ferrara, Giovanna A. F. / Ghersi, Aurelio / Marino, Edoardo M. / Rossi, Pier Paolo	Predicting displacement demand of multi-storey asymmetric buildings by nonlinear static analysis and corrective eccentricities	373-387
Sajedi, Siavash / Huang, Qindan	Probabilistic prediction model for average bond strength at steel–concrete interface considering corrosion effect	120-131
Yuksel, Ercan / Karadogan, H. Faruk / Engin Bal, İ. / Ilki, Alper / Bal, Ahmet / Inci, Pınar	Seismic behavior of two exterior beam–column connections made of normal-strength concrete developed for precast construction	157-172
Fernández Ruiz, M. / Muttoni, A. / Sagaseta, J.	Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects	360-372
Xu, L. / Yuan, X. L.	A simplified seismic design approach for mid-rise buildings with vertical combination of framing systems	568-581
Reddy, Dronnadula V. / Sobhan, Khaled / Liu, Lixian / Young, Jody D.	Size effect on fire resistance of structural concrete	468-478
Romero, M. L. / Espinos, A. / Portolés, J. M. / Hospitaler, A. / Ibañez, C.	Slender double-tube ultra-high strength concrete-filled tubular columns under ambient temperature and fire	536-545
Kampitsis, Andreas E. / Giannakos, Spyros / Gerolymos, Nikos / Sapountzakis, Evangelos J.	Soil–pile interaction considering structural yielding: Numerical modeling and experimental validation	319-333
Gao, X. / Chen, Q.	Static and dynamic analysis of a high static and low dynamic stiffness vibration isolator utilising the solid and liquid mixture	205-213
Lin, Ying-Cheng	Steel sliding-controlled coupled beam modules: Development and seismic behavior for a moment resisting frame	726-736
Jenkel, Christian / Leichsenring, Ferenc / Graf, Wolfgang / Kaliske, Michael	Stochastic modelling of uncertainty in timber engineering	296-310
Cheng, Bin / Qian, Qin / Zhao, Xiao-Ling	Stress concentration factors and fatigue behavior of square bird-beak SHS T-joints under out-of-plane bending	677-684
Saad-Eldeen, S. / Garbatov, Y. / Guedes Soares, C.	Stress–strain analysis of dented rectangular plates subjected to uni-axial compressive loading	78-91
Spadea, Giuseppe / Bencardino, Francesco / Sorrenti, Fabio / Swamy, Ramnath Narayan	Structural effectiveness of FRP materials in strengthening RC beams	631-641
Zhang, Jian / Guo, S. L. / Wu, Z. S. / Zhang, Q. Q.	Structural identification and damage detection through long-gauge strain measurements	173-183
Alves, Vinicius / Cury, Alexandre / Roitman, Ney / Magluta, Carlos / Crémona, Christian	Structural modification assessment using supervised learning methods applied to vibration data	439-448
Chen, Yu / Feng, Ran / Wang, Chaoyang	Tests of steel and composite CHS X-joints with curved chord under axial compression	423-438
Bottoni, Marina / Dufour, Frederic / Giry, Cedric	Topological search of the crack pattern from a continuum mechanical computation	346-359
Tazarv, Mostafa / Saiidi, M. Saiid	UHPC-filled duct connections for accelerated bridge construction of RC columns in high seismic zones	413-422
Underwood, James M. / Sobey, Adam J. / Blake, James I. R. / Ajit Shenoi, R.	Ultimate collapse strength assessment of damaged steel plated grillages	517-535
Jeng, Chyuan-Hwan / Chao, Min	Unified rational formula for pre-cracking torsional stiffness of solid and hollow reinforced concrete members	92-107
Kripka, Moacir / Medeiros, Guilherme F. / Lemonge, Afonso C. C.	Use of optimization for automatic grouping of beam cross-section dimensions in reinforced concrete building structures	311-318

About this
data sheet
IssueID
17942
Published on:
06/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - September 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - September 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.