Engineering Structures - September 2015

Erschienen:	September 2015

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Arcidiacono, Vincenzo / Cimellaro, Gian Paolo / Ochsendorf, John A.	Analysis of the failure mechanisms of the basilica of Santa Maria di Collemaggio during 2009 L'Aquila earthquake	502-516
Harvey, P. Scott / Gavin, Henri P.	Assessment of a rolling isolation system using reduced order structural models	708-725
Kwan, A. K. H. / Dong, C. X. / Ho, J. C. M.	Axial and lateral stress–strain model for FRP confined concrete	285-295
Tripura, Deb Dulal / Singh, Konjengbam Darunkumar	Axial load-capacity of rectangular cement stabilized rammed earth column	402-412
Hosinieh, Milad Mohammadi / Aoude, Hassan / Cook, William D. / Mitchell, Denis	Behavior of ultra-high performance fiber reinforced concrete columns under pure axial loading	388-401
Li, Huile / Xia, He / Soliman, Mohamed / Frangopol, Dan M.	Bridge stress calculation based on the dynamic response of coupled train–bridge system	334-345
Martínez-Rodrigo, M. D. / Filiatrault, A.	A case study on the application of passive control and seismic isolation techniques to cable-stayed bridges: A comparative investigation through non-linear dynamic analyses	232-252
Basu, Dhiman / Whittaker, Andrew S. / Constantinou, Michael C.	Characterizing rotational components of earthquake ground motion using a surface distribution method and response of sample structures	685-707
Ma, Y. S. / Wang, Y. F.	Creep influence on structural dynamic reliability	1-8
Franco, Annalisa / Royer-Carfagni, Gianni	Critical issues in the design-by-testing of annealed glass components	108-119
Anžlin, Andrej / Fischinger, Matej / Isakovic, Tatjana	Cyclic response of I-shaped bridge columns with substandard transverse reinforcement	642-652
Aboshosha, Haitham / El Damatty, Ashraf	Engineering method for estimating the reactions of transmission line conductors under downburst winds	272-284
Hwang, Jae-Seung / Lee, Sang-Hyun / Kareem, Ahsan	Estimation of modal masses of a structure with a mass-type damping device	149-156
Zhang, B. / Teng, J. G. / Yu, T.	Experimental behavior of hybrid FRP–concrete–steel double-skin tubular columns under combined axial compression and cyclic lateral loading	214-231
Russell, J. M. / Owen, J. S. / Hajirasouliha, I.	Experimental investigation on the dynamic response of RC flat slabs after a sudden column loss	28-41
Ataei, Abdolreza / Bradford, Mark A. / Valipour, Hamid R.	Experimental study of flush end plate beam-to-CFST column composite joints with deconstructable bolted shear connectors	616-630
Fantilli, Alessandro P. / Cavallo, Alessio D. / Pistone, Giuseppe	Fiber-reinforced lightweight concrete slabs for the maintenance of the Soleri Viaduct	184-191
Taig, Gerard / Ranzi, Gianluca	Generalised Beam Theory (GBT) for composite beams with partial shear interaction	582-602
Shi, H. / Salim, H.	Geometric nonlinear static and dynamic analysis of guyed towers using fully nonlinear element formulations	492-501
Neto, P. / Alfaiate, J. / Valarinho, L. / Correia, J. R. / Branco, F. A. / Vinagre, J.	Glass beams reinforced with GFRP laminates: Experimental tests and numerical modelling using a discrete strong discontinuity approach	253-263
Keerthan, Poologanathan / Mahendran, Mahen	Improved shear design rules of cold-formed steel beams	603-615
Martinović, S. / Vlahović, M. / Stević, Z. / Volkov Husović, T.	Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete	462-467
Elsouri, A. M. / Harajli, M. H.	Interior RC wide beam-narrow column joints: Potential for improving seismic resistance	42-55
Liu, Chang / Tan, Kang Hai / Fung, Tat Ching	Investigations of nonlinear dynamic performance of top-and-seat with web angle connections subjected to sudden column removal	449-461
Mohri, Foudil / Meftah, Sid Ahmed / Damil, Noureddine	A large torsion beam finite element model for tapered thin-walled open cross sections beams	132-148
Idehara, Sérgio Junichi / Dias Junior, Milton	Modal analysis of structures under non-stationary excitation	56-62
Nicolaides, D. / Markou, G.	Modelling the flexural behaviour of fibre reinforced concrete beams with FEM	653-665
Segal, Edward M. / Rhode-Barbarigos, Landolf / Adriaenssens, Sigrid / Filomeno Coelho, Rajan D.	Multi-objective optimization of polyester-rope and steel-rope suspended footbridges	559-567
Lee, Chang-Hwan / Ju, Young K. / Min, Jeong-Ki / Lho, Seung-Hee / Kim, Sang-Dae	Non-uniform steel strip dampers subjected to cyclic loadings	192-204
Mandal, Kalyan Kumar / Maity, Damodar	Nonlinear finite element analysis of elastic water storage tanks	666-676
de Miranda, S. / Patruno, L. / Ricci, M. / Ubertini, F.	Numerical study of a twin box bridge deck with increasing gap ratio by using RANS and LES approaches	546-558
Wang, Zhe / Chen, Zhihua / Liu, Hongbo	Numerical study on upheaval buckling of pipe-in-pipe systems with full contact imperfections	264-271
Alegria Mira, L. / Filomeno Coelho, R. / Thrall, A. P. / De Temmerman, N.	Parametric evaluation of deployable scissor arches	479-491
Shirmohammadi, Fatemeh / Esmaeily, Asad	Performance of reinforced concrete columns under bi-axial lateral force/displacement and axial load	63-77
Fang, Cheng / Yam, Michael C. H. / Zhou, Xiaoyi / Zhang, Yanyang	Post-buckling resistance of gusset plate connections: Behaviour, strength, and design considerations	9-27
Bosco, Melina / Ferrara, Giovanna A. F. / Ghersi, Aurelio / Marino, Edoardo M. / Rossi, Pier Paolo	Predicting displacement demand of multi-storey asymmetric buildings by nonlinear static analysis and corrective eccentricities	373-387
Sajedi, Siavash / Huang, Qindan	Probabilistic prediction model for average bond strength at steel–concrete interface considering corrosion effect	120-131
Yuksel, Ercan / Karadogan, H. Faruk / Engin Bal, İ. / Ilki, Alper / Bal, Ahmet / Inci, Pınar	Seismic behavior of two exterior beam–column connections made of normal-strength concrete developed for precast construction	157-172
Fernández Ruiz, M. / Muttoni, A. / Sagaseta, J.	Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects	360-372
Xu, L. / Yuan, X. L.	A simplified seismic design approach for mid-rise buildings with vertical combination of framing systems	568-581
Reddy, Dronnadula V. / Sobhan, Khaled / Liu, Lixian / Young, Jody D.	Size effect on fire resistance of structural concrete	468-478
Romero, M. L. / Espinos, A. / Portolés, J. M. / Hospitaler, A. / Ibañez, C.	Slender double-tube ultra-high strength concrete-filled tubular columns under ambient temperature and fire	536-545
Kampitsis, Andreas E. / Giannakos, Spyros / Gerolymos, Nikos / Sapountzakis, Evangelos J.	Soil–pile interaction considering structural yielding: Numerical modeling and experimental validation	319-333
Gao, X. / Chen, Q.	Static and dynamic analysis of a high static and low dynamic stiffness vibration isolator utilising the solid and liquid mixture	205-213
Lin, Ying-Cheng	Steel sliding-controlled coupled beam modules: Development and seismic behavior for a moment resisting frame	726-736
Jenkel, Christian / Leichsenring, Ferenc / Graf, Wolfgang / Kaliske, Michael	Stochastic modelling of uncertainty in timber engineering	296-310
Cheng, Bin / Qian, Qin / Zhao, Xiao-Ling	Stress concentration factors and fatigue behavior of square bird-beak SHS T-joints under out-of-plane bending	677-684
Saad-Eldeen, S. / Garbatov, Y. / Guedes Soares, C.	Stress–strain analysis of dented rectangular plates subjected to uni-axial compressive loading	78-91
Spadea, Giuseppe / Bencardino, Francesco / Sorrenti, Fabio / Swamy, Ramnath Narayan	Structural effectiveness of FRP materials in strengthening RC beams	631-641
Zhang, Jian / Guo, S. L. / Wu, Z. S. / Zhang, Q. Q.	Structural identification and damage detection through long-gauge strain measurements	173-183
Alves, Vinicius / Cury, Alexandre / Roitman, Ney / Magluta, Carlos / Crémona, Christian	Structural modification assessment using supervised learning methods applied to vibration data	439-448
Chen, Yu / Feng, Ran / Wang, Chaoyang	Tests of steel and composite CHS X-joints with curved chord under axial compression	423-438
Bottoni, Marina / Dufour, Frederic / Giry, Cedric	Topological search of the crack pattern from a continuum mechanical computation	346-359
Tazarv, Mostafa / Saiidi, M. Saiid	UHPC-filled duct connections for accelerated bridge construction of RC columns in high seismic zones	413-422
Underwood, James M. / Sobey, Adam J. / Blake, James I. R. / Ajit Shenoi, R.	Ultimate collapse strength assessment of damaged steel plated grillages	517-535
Jeng, Chyuan-Hwan / Chao, Min	Unified rational formula for pre-cracking torsional stiffness of solid and hollow reinforced concrete members	92-107
Kripka, Moacir / Medeiros, Guilherme F. / Lemonge, Afonso C. C.	Use of optimization for automatic grouping of beam cross-section dimensions in reinforced concrete building structures	311-318

Über diese
Datenseite
IssueID
17942
Veröffentlicht am:
06.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - September 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - September 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.