Engineering Structures - April 2017

Published:	April 2017

Articles in this Issue

Author(s)	Title	Page(s)
Genikomsou, Aikaterini S. / Polak, Maria Anna	3D finite element investigation of the compressive membrane action effect in reinforced concrete flat slabs	233-244
Edri, Idan E. / Yankelevsky, David Z.	An analytical model for the out-of-plane response of URM walls to different lateral static loads	194-209
Shin, Hyun-Oh / Yoon, Young-Soo / Mitchell, Denis	Axial load transfer in non-slender ultra-high-strength concrete columns through normal-strength concrete floor slabs	466-480
Xiong, Ming-Xiang / Xiong, De-Xin / Liew, J. Y. Richard	Axial performance of short concrete filled steel tubes with high- and ultra-high- strength materials	494-510
De Biagi, Valerio / Parisi, Fulvio / Asprone, Domenico / Chiaia, Bernardino / Manfredi, Gaetano	Collapse resistance assessment through the implementation of progressive damage in finite element codes	523-534
Li, Shuang / Zuo, Zhanxuan / Zhai, Changhai / Xie, Lili	Comparison of static pushover and dynamic analyses using RC building shaking table experiment	430-440
Li, Xiuling / Wang, Juan / Bao, Yi / Chen, Genda	Cyclic behavior of damaged reinforced concrete columns repaired with high-performance fiber-reinforced cementitious composite	26-35
Li, Rui / Samali, Bijan / Tao, Zhong / Hassan, Md Kamrul	Cyclic behaviour of composite joints with reduced beam sections	329-344
Bui, T. T. / Limam, A. / Sarhosis, V. / Hjiaj, M.	Discrete element modelling of the in-plane and out-of-plane behaviour of dry-joint masonry wall constructions	277-294
Senjanović, Ivo / Tomić, Marko / Hadžić, Neven / Vladimir, Nikola	Dynamic finite element formulations for moderately thick plate vibrations based on the modified Mindlin theory	100-113
Elshaer, Ahmed / Bitsuamlak, Girma / El Damatty, Ashraf	Enhancing wind performance of tall buildings using corner aerodynamic optimization	133-148
Buljak, V. / Cocchetti, G. / Cornaggia, A. / Maier, G.	Estimation of residual stresses by inverse analysis based on experimental data from sample removal for "small punch" tests	77-86
Guerrero, Héctor / Teran-Gilmore, Amador / Ji, Tianjian / Escobar, José A.	Evaluation of the economic benefits of using Buckling-Restrained Braces in hospital structures located in very soft soils	406-419
Pelà, Luca / Kasioumi, Konstantina / Roca, Pere	Experimental evaluation of the shear strength of aerial lime mortar brickwork by standard tests on triplets and non-standard tests on core samples	441-453
Di Sarno, L. / Del Vecchio, C. / Maddaloni, G. / Prota, A.	Experimental response of an existing RC bridge with smooth bars and preliminary numerical simulations	355-368
Hung, Hsiao-Hui / Sung, Yu-Chi / Lin, Kuan-Chen / Jiang, Chi-Rung / Chang, Kuo-Chun	Experimental study and numerical simulation of precast segmental bridge columns with semi-rigid connections	12-25
Skafte, Anders / Kristoffersen, Julie / Vestermark, Jonas / Tygesen, Ulf Tyge / Brincker, Rune	Experimental study of strain prediction on wave induced structures using modal decomposition and quasi static Ritz vectors	261-276
Petrone, Crescenzo / Rossetto, Tiziana / Goda, Katsuichiro	Fragility assessment of a RC structure under tsunami actions via nonlinear static and dynamic analyses	36-53
Hassanli, Reza / ElGawady, Mohamed A. / Mills, Julie E.	In-plane flexural strength of unbonded post-tensioned concrete masonry walls	245-260
Reynolds, James / Zhang, Hao / Rasmussen, Kim J. R.	Investigation of U-head rotational stiffness in formwork supporting scaffold systems	1-11
Plaut, R. H. / Eatherton, M. R.	Lateral-torsional buckling of butterfly-shaped beams with rectangular cross section	210-218
Murin, Justin / Goga, Vladimir / Aminbaghai, Mehdi / Hrabovsky, Juraj / Sedlar, Tibor / Mang, Herbert A.	Measurement and modelling of torsional warping free vibrations of beams with rectangular hollow cross-sections	68-76
Zhao, Bing / Dong, Leiting / Chen, Wujun / Hu, Jianhui / Qiu, Zhenyu / Zhou, Jinyu	Mechanical properties and structural performance of ETFE (ethylene-tetrafluoroethylene) cushion structures at low temperatures	420-429
Neuenschwander, Martin / Knobloch, Markus / Fontana, Mario	Modeling thermo-mechanical behavior of concrete-filled steel tube columns with solid steel core subjected to fire	180-193
Lamata Martínez, Ignacio / Williams, Martin S. / Dyke, Shirley / Krötzsch, Markus / Pegon, Pierre	Next directions in experimental data for seismic hazard mitigation	535-546
Pelletier, Kevin / Léger, Pierre	Nonlinear seismic modeling of reinforced concrete cores including torsion	380-392
Shu, Zhan / Li, Shuang / Zhang, Jian / He, Minjuan	Optimum seismic design of a power plant building with pendulum tuned mass damper system by its heavy suspended buckets	114-132
Zanini, Mariano Angelo / Faleschini, Flora / Pellegrino, Carlo	Probabilistic seismic risk forecasting of aging bridge networks	219-232
Ricker, Marcus / Häusler, Frank / Randl, Norbert	Punching strength of flat plates reinforced with UHPC and double-headed studs	345-354
Louhi, Amine / Limam, Ali / Merabet, Omar / Roure, Thierry	Rebar section loss and carbon fiber reinforced plastic reinforcement effects on nonlinear behavior and ultimate load of cooling towers	481-493
Siam, Ahmad S. / Hussein, Wessam M. / El-Dakhakhni, Wael W.	Scoring models for reinforced masonry shear wall maximum displacement prediction under seismic loads	511-522
Chiorean, Cosmin G.	Second-order flexibility-based model for nonlinear inelastic analysis of 3D semi-rigid steel frameworks	547-579
Castori, Giulio / Borri, Antonio / De Maria, Alessandro / Corradi, Marco / Sisti, Romina	Seismic vulnerability assessment of a monumental masonry building	454-465
Zhang, H. / Wang, C. M. / Challamel, N. / Ruocco, E.	Semi-analytical solutions for optimal design of columns based on Hencky bar-chain model	87-99
Mousavi, Seyed Amin / Zahrai, Seyed Mehdi	Slack free connections to improve seismic behavior of tension-only braces: An experimental and analytical study	54-67
Girhammar, Ulf Arne / Jacquier, Nicolas / Källsner, Bo	Stiffness model for inclined screws in shear-tension mode in timber-to-timber joints	580-595
Ozcelik, Yigit / Clayton, Patricia M.	Strip model for steel plate shear walls with beam-connected web plates	369-379
Shahabpoor, Erfan / Pavic, Aleksandar / Racic, Vitomir	Structural vibration serviceability: New design framework featuring human-structure interaction	295-311
Guo, Lanhui / Rong, Qin / Qu, Bing / Liu, Jiepeng	Testing of steel plate shear walls with composite columns and infill plates connected to beams only	165-179
Guo, Yan-Lin / Zhang, Bo-hao / Zhu, Bo-Li / Zhou, Peng / Zhang, You-Hao / Tong, Jing-Zhong	Theoretical and experimental studies of battened buckling-restrained braces	312-328
Alabdulhady, Meyyada Y. / Sneed, Lesley H. / Carloni, Christian	Torsional behavior of RC beams strengthened with PBO-FRCM composite – An experimental study	393-405
Kueres, Dominik / Siburg, Carsten / Herbrand, Martin / Classen, Martin / Hegger, Josef	Uniform Design Method for punching shear in flat slabs and column bases	149-164

About this
data sheet
IssueID
17923
Published on:
06/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - April 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - April 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.