Engineering Structures - avril 2017

Publié:	avril 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Genikomsou, Aikaterini S. / Polak, Maria Anna	3D finite element investigation of the compressive membrane action effect in reinforced concrete flat slabs	233-244
Edri, Idan E. / Yankelevsky, David Z.	An analytical model for the out-of-plane response of URM walls to different lateral static loads	194-209
Shin, Hyun-Oh / Yoon, Young-Soo / Mitchell, Denis	Axial load transfer in non-slender ultra-high-strength concrete columns through normal-strength concrete floor slabs	466-480
Xiong, Ming-Xiang / Xiong, De-Xin / Liew, J. Y. Richard	Axial performance of short concrete filled steel tubes with high- and ultra-high- strength materials	494-510
De Biagi, Valerio / Parisi, Fulvio / Asprone, Domenico / Chiaia, Bernardino / Manfredi, Gaetano	Collapse resistance assessment through the implementation of progressive damage in finite element codes	523-534
Li, Shuang / Zuo, Zhanxuan / Zhai, Changhai / Xie, Lili	Comparison of static pushover and dynamic analyses using RC building shaking table experiment	430-440
Li, Xiuling / Wang, Juan / Bao, Yi / Chen, Genda	Cyclic behavior of damaged reinforced concrete columns repaired with high-performance fiber-reinforced cementitious composite	26-35
Li, Rui / Samali, Bijan / Tao, Zhong / Hassan, Md Kamrul	Cyclic behaviour of composite joints with reduced beam sections	329-344
Bui, T. T. / Limam, A. / Sarhosis, V. / Hjiaj, M.	Discrete element modelling of the in-plane and out-of-plane behaviour of dry-joint masonry wall constructions	277-294
Senjanović, Ivo / Tomić, Marko / Hadžić, Neven / Vladimir, Nikola	Dynamic finite element formulations for moderately thick plate vibrations based on the modified Mindlin theory	100-113
Elshaer, Ahmed / Bitsuamlak, Girma / El Damatty, Ashraf	Enhancing wind performance of tall buildings using corner aerodynamic optimization	133-148
Buljak, V. / Cocchetti, G. / Cornaggia, A. / Maier, G.	Estimation of residual stresses by inverse analysis based on experimental data from sample removal for "small punch" tests	77-86
Guerrero, Héctor / Teran-Gilmore, Amador / Ji, Tianjian / Escobar, José A.	Evaluation of the economic benefits of using Buckling-Restrained Braces in hospital structures located in very soft soils	406-419
Pelà, Luca / Kasioumi, Konstantina / Roca, Pere	Experimental evaluation of the shear strength of aerial lime mortar brickwork by standard tests on triplets and non-standard tests on core samples	441-453
Di Sarno, L. / Del Vecchio, C. / Maddaloni, G. / Prota, A.	Experimental response of an existing RC bridge with smooth bars and preliminary numerical simulations	355-368
Hung, Hsiao-Hui / Sung, Yu-Chi / Lin, Kuan-Chen / Jiang, Chi-Rung / Chang, Kuo-Chun	Experimental study and numerical simulation of precast segmental bridge columns with semi-rigid connections	12-25
Skafte, Anders / Kristoffersen, Julie / Vestermark, Jonas / Tygesen, Ulf Tyge / Brincker, Rune	Experimental study of strain prediction on wave induced structures using modal decomposition and quasi static Ritz vectors	261-276
Petrone, Crescenzo / Rossetto, Tiziana / Goda, Katsuichiro	Fragility assessment of a RC structure under tsunami actions via nonlinear static and dynamic analyses	36-53
Hassanli, Reza / ElGawady, Mohamed A. / Mills, Julie E.	In-plane flexural strength of unbonded post-tensioned concrete masonry walls	245-260
Reynolds, James / Zhang, Hao / Rasmussen, Kim J. R.	Investigation of U-head rotational stiffness in formwork supporting scaffold systems	1-11
Plaut, R. H. / Eatherton, M. R.	Lateral-torsional buckling of butterfly-shaped beams with rectangular cross section	210-218
Murin, Justin / Goga, Vladimir / Aminbaghai, Mehdi / Hrabovsky, Juraj / Sedlar, Tibor / Mang, Herbert A.	Measurement and modelling of torsional warping free vibrations of beams with rectangular hollow cross-sections	68-76
Zhao, Bing / Dong, Leiting / Chen, Wujun / Hu, Jianhui / Qiu, Zhenyu / Zhou, Jinyu	Mechanical properties and structural performance of ETFE (ethylene-tetrafluoroethylene) cushion structures at low temperatures	420-429
Neuenschwander, Martin / Knobloch, Markus / Fontana, Mario	Modeling thermo-mechanical behavior of concrete-filled steel tube columns with solid steel core subjected to fire	180-193
Lamata Martínez, Ignacio / Williams, Martin S. / Dyke, Shirley / Krötzsch, Markus / Pegon, Pierre	Next directions in experimental data for seismic hazard mitigation	535-546
Pelletier, Kevin / Léger, Pierre	Nonlinear seismic modeling of reinforced concrete cores including torsion	380-392
Shu, Zhan / Li, Shuang / Zhang, Jian / He, Minjuan	Optimum seismic design of a power plant building with pendulum tuned mass damper system by its heavy suspended buckets	114-132
Zanini, Mariano Angelo / Faleschini, Flora / Pellegrino, Carlo	Probabilistic seismic risk forecasting of aging bridge networks	219-232
Ricker, Marcus / Häusler, Frank / Randl, Norbert	Punching strength of flat plates reinforced with UHPC and double-headed studs	345-354
Louhi, Amine / Limam, Ali / Merabet, Omar / Roure, Thierry	Rebar section loss and carbon fiber reinforced plastic reinforcement effects on nonlinear behavior and ultimate load of cooling towers	481-493
Siam, Ahmad S. / Hussein, Wessam M. / El-Dakhakhni, Wael W.	Scoring models for reinforced masonry shear wall maximum displacement prediction under seismic loads	511-522
Chiorean, Cosmin G.	Second-order flexibility-based model for nonlinear inelastic analysis of 3D semi-rigid steel frameworks	547-579
Castori, Giulio / Borri, Antonio / De Maria, Alessandro / Corradi, Marco / Sisti, Romina	Seismic vulnerability assessment of a monumental masonry building	454-465
Zhang, H. / Wang, C. M. / Challamel, N. / Ruocco, E.	Semi-analytical solutions for optimal design of columns based on Hencky bar-chain model	87-99
Mousavi, Seyed Amin / Zahrai, Seyed Mehdi	Slack free connections to improve seismic behavior of tension-only braces: An experimental and analytical study	54-67
Girhammar, Ulf Arne / Jacquier, Nicolas / Källsner, Bo	Stiffness model for inclined screws in shear-tension mode in timber-to-timber joints	580-595
Ozcelik, Yigit / Clayton, Patricia M.	Strip model for steel plate shear walls with beam-connected web plates	369-379
Shahabpoor, Erfan / Pavic, Aleksandar / Racic, Vitomir	Structural vibration serviceability: New design framework featuring human-structure interaction	295-311
Guo, Lanhui / Rong, Qin / Qu, Bing / Liu, Jiepeng	Testing of steel plate shear walls with composite columns and infill plates connected to beams only	165-179
Guo, Yan-Lin / Zhang, Bo-hao / Zhu, Bo-Li / Zhou, Peng / Zhang, You-Hao / Tong, Jing-Zhong	Theoretical and experimental studies of battened buckling-restrained braces	312-328
Alabdulhady, Meyyada Y. / Sneed, Lesley H. / Carloni, Christian	Torsional behavior of RC beams strengthened with PBO-FRCM composite – An experimental study	393-405
Kueres, Dominik / Siburg, Carsten / Herbrand, Martin / Classen, Martin / Hegger, Josef	Uniform Design Method for punching shear in flat slabs and column bases	149-164

Informations
sur cette fiche
IssueID
17923
Publié(e) le:
06.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - avril 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - avril 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.