Engineering Structures - November 2016

Published:	November 2016

Articles in this Issue

Author(s)	Title	Page(s)
Moslemi, Mehdi / Kianoush, M. Reza	Application of seismic isolation technique to partially filled conical elevated tanks	663-675
Lim, Sopokhem / Akiyama, Mitsuyoshi / Frangopol, Dan M.	Assessment of the structural performance of corrosion-affected RC members based on experimental study and probabilistic modeling	189-205
Lee, Se-Hyeok / Song, Junho	Bayesian-network-based system identification of spatial distribution of structural parameters	260-277
Breccolotti, Marco / Gentile, Santino / Tommasini, Mauro / Materazzi, Annibale Luigi / Bonfigli, Massimo Federico / Pasqualini, Bruno / Colone, Valerio / Gianesini, Marco	Beam-column joints in continuous RC frames: Comparison between cast-in-situ and precast solutions	129-144
Xiang, X. M. / Lu, G. / Ma, G. W. / Li, X. Y. / Shu, D. W.	Blast response of sandwich beams with thin-walled tubes as core	40-48
Mo, Kim Hung / Visintin, Phillip / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Bond stress-slip relationship of oil palm shell lightweight concrete	319-330
Zhang, Dawei / Zhao, Yuxi / Ueda, Tamon / Li, Xiangmin / Xu, Qingfeng	CFRP strengthened RC beams with pre-strengthening non-uniform reinforcement corrosion subjected to post-strengthening wetting/drying cycles	331-343
Trentadue, Francesco / Quaranta, Giuseppe / Marano, Giuseppe C.	Closed-form approximations of interaction diagrams for assessment and design of reinforced concrete columns and concrete-filled steel tubes with circular cross-section	594-601
Bai, Yongtao / Shi, Yundong / Deng, Kailai	Collapse analysis of high-rise steel moment frames incorporating deterioration effects of column axial force – bending moment interaction	402-415
Dundu, M.	Column buckling tests of hot-rolled concrete filled square hollow sections of mild to high strength steel	73-85
Torelli, Giacomo / Mandal, Parthasarathi / Gillie, Martin / Tran, Van-Xuan	Concrete strains under transient thermal conditions: A state-of-the-art review	172-188
Mortazavi, Pedram / Humar, Jagmohan	Consideration of diaphragm flexibility in the seismic design of one-story buildings	748-758
Zhou, Feng / Xu, Wenchao	Cyclic loading tests on concrete-filled double-skin (SHS outer and CHS inner) stainless steel tubular beam-columns	304-318
Ji, Xiaodong / Leong, Tongseng / Qian, Jiaru / Qi, Wuhui / Yang, Weibiao	Cyclic shear behavior of composite walls with encased steel braces	117-128
Pierdicca, A. / Clementi, F. / Maracci, D. / Isidori, D. / Lenci, S.	Damage detection in a precast structure subjected to an earthquake: A numerical approach	447-458
Wijesundara, Lakshitha M. G. / Clubley, Simon K.	Damage state identification for reinforced concrete columns in uplift due to internal building detonations	804-823
Smith, B. H. / Arwade, S. R. / Schafer, B. W. / Moen, C. D.	Design component and system reliability in a low-rise cold formed steel framed commercial building	434-446
Xu, Long-He / Fan, Xiao-Wei / Li, Zhong-Xian	Development and experimental verification of a pre-pressed spring self-centering energy dissipation brace	49-61
Hashemi, S. K. / Bradford, M. A. / Valipour, H. R.	Dynamic response of cable-stayed bridge under blast load	719-736
Giaretton, Marta / Dizhur, Dmytro / Ingham, Jason M.	Dynamic testing of as-built clay brick unreinforced masonry parapets	676-685
Ding, Yong / Zhang, Wei / Au, Francis T. K.	Effect of dynamic impact at modular bridge expansion joints on bridge design	645-662
Shin, Hyun-Oh / Yoon, Young-Soo / Cook, William D. / Mitchell, Denis	Enhancing the confinement of ultra-high-strength concrete columns using headed crossties	86-100
Shin, Hyun-Oh / Yoon, Young-Soo / Cook, William D. / Mitchell, Denis	Enhancing the performance of UHSC columns intersected by weaker slabs	359-373
Zhou, Man / Liu, Zhao / Zhang, Jiandong / An, Lin / He, Zhiqi	Equivalent computational models and deflection calculation methods of box girders with corrugated steel webs	615-634
Koliou, Maria / van de Lindt, John W. / Filiatrault, Andre	Evaluation of an alternative seismic design approach for rigid wall flexible wood roof diaphragm buildings through probabilistic loss estimation and disaggregation	31-39
Sener, Kadir C. / Varma, Amit H. / Seo, Jungil	Experimental and numerical investigation of the shear behavior of steel-plate composite (SC) beams without shear reinforcement	495-509
Codina, Ramón / Ambrosini, Daniel / de Borbón, Fernanda	Experimental and numerical study of a RC member under a close-in blast loading	145-158
Jiang, Dongqi / Terzioglu, Tevfik / Hueste, Mary Beth D. / Mander, John B. / Fry, Gary T.	Experimental study of an in-service spread slab beam bridge	525-535
Peng, Hui / Zhang, Jianren / Shang, Shouping / Liu, Yang / Cai, C. S.	Experimental study of flexural fatigue performance of reinforced concrete beams strengthened with prestressed CFRP plates	62-72
Mas, Benito / Cladera, Antoni / Ribas, Carlos	Experimental study on concrete beams reinforced with pseudoelastic Ni-Ti continuous rectangular spiral reinforcement failing in shear	759-768
Llau, Antoine / Jason, Ludovic / Dufour, Frederic / Baroth, Julien	Finite element modelling of 1D steel components in reinforced and prestressed concrete structures	769-783
Sneed, Lesley H. / Verre, Salvatore / Carloni, Christian / Ombres, Luciano	Flexural behavior of RC beams strengthened with steel-FRCM composite	686-699
Tullini, Nerio / Minghini, Fabio	Grouted sleeve connections used in precast reinforced concrete construction – Experimental investigation of a column-to-column joint	784-803
Desnerck, Pieter / Lees, Janet M. / Morley, Chris T.	Impact of the reinforcement layout on the load capacity of reinforced concrete half-joints	227-239
Estefen, Segen F. / Chujutalli, John H. / Guedes Soares, C.	Influence of geometric imperfections on the ultimate strength of the double bottom of a Suezmax tanker	287-303
Bosco, Melina / Marino, Edoardo M. / Rossi, Pier Paolo	Influence of modelling of steel link beams on the seismic response of EBFs	459-474
Conde, B. / Drosopoulos, G. A. / Stavroulakis, G. E. / Riveiro, B. / Stavroulaki, M. E.	Inverse analysis of masonry arch bridges for damaged condition investigation: Application on Kakodiki bridge	388-401
Gardner, Leroy / Bu, Yidu / Theofanous, Marios	Laser-welded stainless steel I-sections: Residual stress measurements and column buckling tests	536-548
Tong, Teng / Liu, Zhao / Zhang, Jie / Yu, Qiang	Long-term performance of prestressed concrete bridges under the intertwined effects of concrete damage, static creep and traffic-induced cyclic creep	510-524
Elawady, Amal / El Damatty, Ashraf	Longitudinal force on transmission towers due to non-symmetric downburst conductor loads	206-226
Wan, Chen / Audi, Charlie / Sasani, Mehrdad	Modeling floor systems for collapse analysis	278-286
Lepretre, E. / Chataigner, S. / Dieng, L. / Gaillet, L. / Cannard, H.	Numerical and experimental investigations of hot driven riveting process on old metal structures	583-593
Campidelli, M. / Tait, M. J. / El-Dakhakhni, W. W. / Mekky, W.	Numerical strategies for damage assessment of reinforced concrete block walls subjected to blast risk	559-582
Yan, Fei / Chen, Weizhen / Lin, Zhibin	Prediction of fatigue life of welded details in cable-stayed orthotropic steel deck bridges	344-358
Guo, Jiamin / Zhou, Dai	Pretension simulation and experiment of a negative Gaussian curvature cable dome	737-747
He, Shuai / Ng, Ching-Tai	A probabilistic approach for quantitative identification of multiple delaminations in laminated composite beams using guided waves	602-614
Lantsoght, Eva O. L. / van der Veen, Cor / de Boer, Ane / Hordijk, Dick A.	Probabilistic prediction of the failure mode of the Ruytenschildt Bridge	549-558
Ibrahim, Omar A. / Lignos, Dimitrios G. / Rogers, Colin A.	Proposed modeling approach of welding procedures for heavy steel plates	18-30
Dong, Wei / Ye, Jiabing / Murakami, Yuki / Oshita, Hideki / Suzuki, Shuichi / Tsutsumi, Tomoaki	Residual load capacity of corroded reinforced concrete beam undergoing bond failure	159-171
Gil-Martín, L. M. / Hernández-Montes, E.	Safety levels of the traditional strength design of RC slabs under bending and torsion	374-387
Bolhassani, M. / Hamid, A. A. / Johnson, C. / Schultz, A. E.	Shear strength expression for partially grouted masonry walls	475-494
Zhang, Fasheng / Ding, Yining / Xu, Jing / Zhang, Yulin / Zhu, Weiqing / Shi, Yunxing	Shear strength prediction for steel fiber reinforced concrete beams without stirrups	101-116
Nguyen, Viet Ha / Schommer, Sebastian / Maas, Stefan / Zürbes, Arno	Static load testing with temperature compensation for structural health monitoring of bridges	700-718
El-Khoury, Omar / Shafieezadeh, Abdollah	A stochastic averaging-based optimal control method for nonlinear systems: Application to a building with soil-structure interactions	635-644
Zhu, Q. / Xu, Y. L. / Shum, K. M.	Stress-level buffeting analysis of a long-span cable-stayed bridge with a twin-box deck under distributed wind loads	416-433
Lin, Jui-Liang / Wang, Wei-Chun / Tsai, Keh-Chyuan	Suitability of using the torsional amplification factor to amplify accidental torsion	1-17
Beninato, Francesco / Foti, Dora / Vacca, Vitantonio	U.l.S. 3D domain of rectangular cross-sections in r.c. subject to shear and torsion	240-259

About this
data sheet
IssueID
17523
Published on:
06/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - November 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - November 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.