Engineering Structures - novembre 2016

Publié:	novembre 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Moslemi, Mehdi / Kianoush, M. Reza	Application of seismic isolation technique to partially filled conical elevated tanks	663-675
Lim, Sopokhem / Akiyama, Mitsuyoshi / Frangopol, Dan M.	Assessment of the structural performance of corrosion-affected RC members based on experimental study and probabilistic modeling	189-205
Lee, Se-Hyeok / Song, Junho	Bayesian-network-based system identification of spatial distribution of structural parameters	260-277
Breccolotti, Marco / Gentile, Santino / Tommasini, Mauro / Materazzi, Annibale Luigi / Bonfigli, Massimo Federico / Pasqualini, Bruno / Colone, Valerio / Gianesini, Marco	Beam-column joints in continuous RC frames: Comparison between cast-in-situ and precast solutions	129-144
Xiang, X. M. / Lu, G. / Ma, G. W. / Li, X. Y. / Shu, D. W.	Blast response of sandwich beams with thin-walled tubes as core	40-48
Mo, Kim Hung / Visintin, Phillip / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Bond stress-slip relationship of oil palm shell lightweight concrete	319-330
Zhang, Dawei / Zhao, Yuxi / Ueda, Tamon / Li, Xiangmin / Xu, Qingfeng	CFRP strengthened RC beams with pre-strengthening non-uniform reinforcement corrosion subjected to post-strengthening wetting/drying cycles	331-343
Trentadue, Francesco / Quaranta, Giuseppe / Marano, Giuseppe C.	Closed-form approximations of interaction diagrams for assessment and design of reinforced concrete columns and concrete-filled steel tubes with circular cross-section	594-601
Bai, Yongtao / Shi, Yundong / Deng, Kailai	Collapse analysis of high-rise steel moment frames incorporating deterioration effects of column axial force – bending moment interaction	402-415
Dundu, M.	Column buckling tests of hot-rolled concrete filled square hollow sections of mild to high strength steel	73-85
Torelli, Giacomo / Mandal, Parthasarathi / Gillie, Martin / Tran, Van-Xuan	Concrete strains under transient thermal conditions: A state-of-the-art review	172-188
Mortazavi, Pedram / Humar, Jagmohan	Consideration of diaphragm flexibility in the seismic design of one-story buildings	748-758
Zhou, Feng / Xu, Wenchao	Cyclic loading tests on concrete-filled double-skin (SHS outer and CHS inner) stainless steel tubular beam-columns	304-318
Ji, Xiaodong / Leong, Tongseng / Qian, Jiaru / Qi, Wuhui / Yang, Weibiao	Cyclic shear behavior of composite walls with encased steel braces	117-128
Pierdicca, A. / Clementi, F. / Maracci, D. / Isidori, D. / Lenci, S.	Damage detection in a precast structure subjected to an earthquake: A numerical approach	447-458
Wijesundara, Lakshitha M. G. / Clubley, Simon K.	Damage state identification for reinforced concrete columns in uplift due to internal building detonations	804-823
Smith, B. H. / Arwade, S. R. / Schafer, B. W. / Moen, C. D.	Design component and system reliability in a low-rise cold formed steel framed commercial building	434-446
Xu, Long-He / Fan, Xiao-Wei / Li, Zhong-Xian	Development and experimental verification of a pre-pressed spring self-centering energy dissipation brace	49-61
Hashemi, S. K. / Bradford, M. A. / Valipour, H. R.	Dynamic response of cable-stayed bridge under blast load	719-736
Giaretton, Marta / Dizhur, Dmytro / Ingham, Jason M.	Dynamic testing of as-built clay brick unreinforced masonry parapets	676-685
Ding, Yong / Zhang, Wei / Au, Francis T. K.	Effect of dynamic impact at modular bridge expansion joints on bridge design	645-662
Shin, Hyun-Oh / Yoon, Young-Soo / Cook, William D. / Mitchell, Denis	Enhancing the confinement of ultra-high-strength concrete columns using headed crossties	86-100
Shin, Hyun-Oh / Yoon, Young-Soo / Cook, William D. / Mitchell, Denis	Enhancing the performance of UHSC columns intersected by weaker slabs	359-373
Zhou, Man / Liu, Zhao / Zhang, Jiandong / An, Lin / He, Zhiqi	Equivalent computational models and deflection calculation methods of box girders with corrugated steel webs	615-634
Koliou, Maria / van de Lindt, John W. / Filiatrault, Andre	Evaluation of an alternative seismic design approach for rigid wall flexible wood roof diaphragm buildings through probabilistic loss estimation and disaggregation	31-39
Sener, Kadir C. / Varma, Amit H. / Seo, Jungil	Experimental and numerical investigation of the shear behavior of steel-plate composite (SC) beams without shear reinforcement	495-509
Codina, Ramón / Ambrosini, Daniel / de Borbón, Fernanda	Experimental and numerical study of a RC member under a close-in blast loading	145-158
Jiang, Dongqi / Terzioglu, Tevfik / Hueste, Mary Beth D. / Mander, John B. / Fry, Gary T.	Experimental study of an in-service spread slab beam bridge	525-535
Peng, Hui / Zhang, Jianren / Shang, Shouping / Liu, Yang / Cai, C. S.	Experimental study of flexural fatigue performance of reinforced concrete beams strengthened with prestressed CFRP plates	62-72
Mas, Benito / Cladera, Antoni / Ribas, Carlos	Experimental study on concrete beams reinforced with pseudoelastic Ni-Ti continuous rectangular spiral reinforcement failing in shear	759-768
Llau, Antoine / Jason, Ludovic / Dufour, Frederic / Baroth, Julien	Finite element modelling of 1D steel components in reinforced and prestressed concrete structures	769-783
Sneed, Lesley H. / Verre, Salvatore / Carloni, Christian / Ombres, Luciano	Flexural behavior of RC beams strengthened with steel-FRCM composite	686-699
Tullini, Nerio / Minghini, Fabio	Grouted sleeve connections used in precast reinforced concrete construction – Experimental investigation of a column-to-column joint	784-803
Desnerck, Pieter / Lees, Janet M. / Morley, Chris T.	Impact of the reinforcement layout on the load capacity of reinforced concrete half-joints	227-239
Estefen, Segen F. / Chujutalli, John H. / Guedes Soares, C.	Influence of geometric imperfections on the ultimate strength of the double bottom of a Suezmax tanker	287-303
Bosco, Melina / Marino, Edoardo M. / Rossi, Pier Paolo	Influence of modelling of steel link beams on the seismic response of EBFs	459-474
Conde, B. / Drosopoulos, G. A. / Stavroulakis, G. E. / Riveiro, B. / Stavroulaki, M. E.	Inverse analysis of masonry arch bridges for damaged condition investigation: Application on Kakodiki bridge	388-401
Gardner, Leroy / Bu, Yidu / Theofanous, Marios	Laser-welded stainless steel I-sections: Residual stress measurements and column buckling tests	536-548
Tong, Teng / Liu, Zhao / Zhang, Jie / Yu, Qiang	Long-term performance of prestressed concrete bridges under the intertwined effects of concrete damage, static creep and traffic-induced cyclic creep	510-524
Elawady, Amal / El Damatty, Ashraf	Longitudinal force on transmission towers due to non-symmetric downburst conductor loads	206-226
Wan, Chen / Audi, Charlie / Sasani, Mehrdad	Modeling floor systems for collapse analysis	278-286
Lepretre, E. / Chataigner, S. / Dieng, L. / Gaillet, L. / Cannard, H.	Numerical and experimental investigations of hot driven riveting process on old metal structures	583-593
Campidelli, M. / Tait, M. J. / El-Dakhakhni, W. W. / Mekky, W.	Numerical strategies for damage assessment of reinforced concrete block walls subjected to blast risk	559-582
Yan, Fei / Chen, Weizhen / Lin, Zhibin	Prediction of fatigue life of welded details in cable-stayed orthotropic steel deck bridges	344-358
Guo, Jiamin / Zhou, Dai	Pretension simulation and experiment of a negative Gaussian curvature cable dome	737-747
He, Shuai / Ng, Ching-Tai	A probabilistic approach for quantitative identification of multiple delaminations in laminated composite beams using guided waves	602-614
Lantsoght, Eva O. L. / van der Veen, Cor / de Boer, Ane / Hordijk, Dick A.	Probabilistic prediction of the failure mode of the Ruytenschildt Bridge	549-558
Ibrahim, Omar A. / Lignos, Dimitrios G. / Rogers, Colin A.	Proposed modeling approach of welding procedures for heavy steel plates	18-30
Dong, Wei / Ye, Jiabing / Murakami, Yuki / Oshita, Hideki / Suzuki, Shuichi / Tsutsumi, Tomoaki	Residual load capacity of corroded reinforced concrete beam undergoing bond failure	159-171
Gil-Martín, L. M. / Hernández-Montes, E.	Safety levels of the traditional strength design of RC slabs under bending and torsion	374-387
Bolhassani, M. / Hamid, A. A. / Johnson, C. / Schultz, A. E.	Shear strength expression for partially grouted masonry walls	475-494
Zhang, Fasheng / Ding, Yining / Xu, Jing / Zhang, Yulin / Zhu, Weiqing / Shi, Yunxing	Shear strength prediction for steel fiber reinforced concrete beams without stirrups	101-116
Nguyen, Viet Ha / Schommer, Sebastian / Maas, Stefan / Zürbes, Arno	Static load testing with temperature compensation for structural health monitoring of bridges	700-718
El-Khoury, Omar / Shafieezadeh, Abdollah	A stochastic averaging-based optimal control method for nonlinear systems: Application to a building with soil-structure interactions	635-644
Zhu, Q. / Xu, Y. L. / Shum, K. M.	Stress-level buffeting analysis of a long-span cable-stayed bridge with a twin-box deck under distributed wind loads	416-433
Lin, Jui-Liang / Wang, Wei-Chun / Tsai, Keh-Chyuan	Suitability of using the torsional amplification factor to amplify accidental torsion	1-17
Beninato, Francesco / Foti, Dora / Vacca, Vitantonio	U.l.S. 3D domain of rectangular cross-sections in r.c. subject to shear and torsion	240-259

Informations
sur cette fiche
IssueID
17523
Publié(e) le:
06.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - novembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - novembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.