Engineering Structures - February 2017

Published:	February 2017

Articles in this Issue

Author(s)	Title	Page(s)
Alhadid, M. Monir A. / Youssef, Maged A.	Analysis of reinforced concrete beams strengthened using concrete jackets	172-187
Alujević, N. / Campillo-Davo, N. / Kindt, P. / Desmet, W. / Pluymers, B. / Vercammen, S.	Analytical solution for free vibrations of rotating cylindrical shells having free boundary conditions	152-171
Lam, Heung-Fai / Hu, Jun / Yang, Jia-Hua	Bayesian operational modal analysis and Markov chain Monte Carlo-based model updating of a factory building	314-336
Bahrami, Saeed / Madhkhan, Morteza / Shirmohammadi, Fatemeh / Nazemi, Nima	Behavior of two new moment resisting precast beam to column connections subjected to lateral loading	808-821
Boccadoro, Lorenzo / Zweidler, Simon / Steiger, René / Frangi, Andrea	Bending tests on timber-concrete composite members made of beech laminated veneer lumber with notched connection	14-28
Feng, Peng / Hu, Lili / Qian, Peng / Ye, Lieping	Buckling behavior of CFRP-aluminum alloy hybrid tubes in axial compression	624-636
Wang, Q. / Nakamura, S. / Okumatsu, T. / Nishikawa, T.	Comprehensive investigation on the cause of a critical crack found in a diagonal member of a steel truss bridge	659-670
Obaidat, Ala' T. / Abo El Ezz, Ahmad / Galal, Khaled	Compression behavior of confined concrete masonry boundary elements	562-575
Eid, Rami / Paultre, Patrick	Compressive behavior of FRP-confined reinforced concrete columns	518-530
Chisari, Corrado / Francavilla, Antonella B. / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio / Amadio, Claudio	Critical issues in parameter calibration of cyclic models for steel members	123-138
Roy, Biswajit / Laskar, Aminul Islam	Cyclic behavior of in-situ exterior beam-column subassemblies with cold joint in column	822-833
Yuniarsyah, Eko / Kono, Susumu / Tani, Masanori / Taleb, Rafik / Sugimoto, Kuniyoshi / Mukai, Tomohisa	Damage evaluation of lightly reinforced concrete walls in moment resisting frames under seismic loading	349-371
Habte, Filmon / Chowdhury, Arindam Gan / Yeo, DongHun / Simiu, Emil	Design of rigid structures for wind using time series of demand-to-capacity indexes: Application to steel portal frames	428-442
Zhen, Liang / Qiao, Pizhong / Zhong, Junbin / Chen, Qingyuan / Chen, Jin-Jian / Wang, Jian-Hua	Design of steel pipe-jacking based on buckling analysis by finite strip method	139-151
Luu, C. H. / Mo, Y. L. / Hsu, Thomas T. C.	Development of CSMM-based shell element for reinforced concrete structures	778-790
Moliner, E. / Martínez-Rodrigo, M. D. / Museros, P.	Dynamic performance of existing double track railway bridges at resonance with the increase of the operational line speed	98-109
Zuo, Delong / Wu, Liang / Smith, Douglas A. / Morse, Stephen M.	Experimental and analytical study of galloping of a slender tower	44-60
Zhang, Xiangcheng / Zhang, Xu / Zhao, Yixiao / Zhao, Jun / Xu, Zhaodong	Experimental and numerical studies on a composite MR damper considering magnetic saturation effect	576-585
Cui, Ye / Lu, Xilin / Jiang, Chun	Experimental investigation of tri-axial self-centering reinforced concrete frame structures through shaking table tests	684-694
Cavaco, Eduardo / Camara, José	Experimental research on the behaviour of concrete-to-concrete interfaces subjected to a combination of shear and bending moment	278-287
Wang, Yang / Jia, Jinsheng	Experimental study on the influence of hydraulic fracturing on high concrete gravity dams	508-517
Chae, Yunbyeong / Park, Minseok / Kim, Chul-Young / Park, Young Suk	Experimental study on the rate-dependency of reinforced concrete structures using slow and real-time hybrid simulations	648-658
Shim, Changsu / Lee, Sangyong / Park, Seongjun / Koem, Chandara	Experiments on prefabricated segmental bridge piers with continuous longitudinal reinforcing bars	671-683
Sousa, Carlos / Leitão, Luís / Faria, Rui / Azenha, Miguel	A formulation to reduce mesh dependency in FE analyses of RC structures under imposed deformations	443-455
Chomchuen, Prakit / Boonyapinyo, Virote	Incremental dynamic analysis with multi-modes for seismic performance evaluation of RC bridges	29-43
Loss, Cristiano / Davison, Buick	Innovative composite steel-timber floors with prefabricated modular components	695-713
Castellazzi, Giovanni / D'Altri, Antonio Maria / de Miranda, Stefano / Ubertini, Francesco	An innovative numerical modeling strategy for the structural analysis of historical monumental buildings	229-248
Mesnil, Romain / Douthe, Cyril / Baverel, Olivier / Leger, Bruno	Linear buckling of quadrangular and kagome gridshells: A comparative assessment	337-348
Repetto, Maria Pia / Torrielli, Alessio	Long term simulation of wind-induced fatigue loadings	551-561
Preti, Marco / Bolis, Valentino	Masonry infill construction and retrofit technique for the infill-frame interaction mitigation: Test results	597-608
Alfouneh, Mahmoud / Tong, Liyong	Maximizing modal damping in layered structures via multi-objective topology optimization	637-647
Hu, Yu / Chen, Wujun / Chen, Yufeng / Zhang, Daxu / Qiu, Zhenyu	Modal behaviors and influencing factors analysis of inflated membrane structures	413-427
Alfarah, B. / López-Almansa, F. / Oller, S.	New methodology for calculating damage variables evolution in Plastic Damage Model for RC structures	70-86
Pérez-Ocón, F. / Pozo, A. M. / Rabaza, O.	New obstruction lighting system for aviation safety	531-539
Shoeibi, Shahrokh / Kafi, Mohammad Ali / Gholhaki, Majid	New performance-based seismic design method for structures with structural fuse system	745-760
Asteris, P. G. / Cavaleri, L. / Di Trapani, F. / Tsaris, A. K.	Numerical modelling of out-of-plane response of infilled frames: State of the art and future challenges for the equivalent strut macromodels	110-122
Cha, Y.-J. / Chen, J. G. / Buyukozturk, O.	Output-only computer vision based damage detection using phase-based optical flow and unscented Kalman filters	300-313
Goodey, R. J. / Brown, C. J. / Rotter, J. M.	Rectangular steel silos: Finite element predictions of filling wall pressures	61-69
Rinaldin, G. / Amadio, C. / Gattesco, N.	Review of experimental cyclic tests on unreinforced and strengthened masonry spandrels and numerical modelling of their cyclic behaviour	609-623
Monteiro, A. / Arêde, A. / Vila Pouca, N.	Seismic behavior of coupled column bridge RC piers: Experimental campaign	399-412
Zhao, Junxian / Lin, Fuxiong / Wang, Zhan	Seismic design of buckling-restrained brace welded end connection considering frame action effects: Theoretical, numerical and practical approaches	761-777
Wu, Yuntian / Zhang, Jie / Yang, Yeong-bin / Ye, Peng / Xiao, Yan	Seismic performance of reinforced concrete squat walls with embedded cold-formed and thin walled steel truss	714-732
Negro, Paolo / Lamperti Tornaghi, Marco	Seismic response of precast structures with vertical cladding panels: The SAFECLADDING experimental campaign	205-228
Ferreiro-Cabello, J. / Fraile-García, E. / Martinez-Camara, E. / Perez-de-la-Parte, M.	Sensitivity analysis of Life Cycle Assessment to select reinforced concrete structures with one-way slabs	586-596
Ramnavas, M. P. / Patel, K. A. / Chaudhary, Sandeep / Nagpal, A. K.	Service load analysis of composite frames using cracked span length frame element	733-744
Tian, Li / Gai, Xia / Qu, Bing	Shake table tests of steel towers supporting extremely long-span electricity transmission lines under spatially correlated ground motions	791-807
Landesmann, Alexandre / Camotim, Dinar / Dinis, Pedro B. / Cruz, Renato	Short-to-intermediate slender pin-ended cold-formed steel equal-leg angle columns: Experimental investigation, numerical simulations and DSM design	471-493
Hopkins, Paul M. / Chen, An / Yossef, Mostafa	Static and dynamic analyses of insulated concrete sandwich panels using a unified non-linear finite element model	249-259
Fernandes, Hugo / Lúcio, Válter / Ramos, António	Strengthening of RC slabs with reinforced concrete overlay on the tensile face	540-550
Xiao, Jianzhuang / Ding, Tao / Zhang, Qingtian	Structural behavior of a new moment-resisting DfD concrete connection	1-13
Ehsani, Behrang / Toopchi-Nezhad, Hamid	Systematic design of unbonded fiber reinforced elastomeric isolators	383-398
Arshian, Amir Hossein / Morgenthal, Guido	Three-dimensional progressive collapse analysis of reinforced concrete frame structures subjected to sequential column removal	87-97
Ballaben, Jorge S. / Sampaio, Rubens / Rosales, Marta B.	Uncertainty quantification in the dynamics of a guyed mast subjected to wind load	456-470
Málaga-Chuquitaype, C. / Bougatsas, K.	Vector-IM-based assessment of alternative framing systems under bi-directional ground-motion	188-204
Choi, Eunsoo / Youn, Heejung / Park, Kyoungsoo / Jeon, Jong-Su	Vibration tests of precompressed rubber springs and a flag-shaped smart damper	372-382
Yin, Tao / Jiang, Qing-Hui / Yuen, Ka-Veng	Vibration-based damage detection for structural connections using incomplete modal data by Bayesian approach and model reduction technique	260-277
Hung, Chung-Chan / Yau, Wen-Gi	Vulnerability evaluation of scoured bridges under floods	288-299
Shahsavari, Vahid / Chouinard, Luc / Bastien, Josée	Wavelet-based analysis of mode shapes for statistical detection and localization of damage in beams using likelihood ratio test	494-507

About this
data sheet
IssueID
17518
Published on:
06/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - February 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - February 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.