Engineering Structures - Februar 2017

Erschienen:	Februar 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Alhadid, M. Monir A. / Youssef, Maged A.	Analysis of reinforced concrete beams strengthened using concrete jackets	172-187
Alujević, N. / Campillo-Davo, N. / Kindt, P. / Desmet, W. / Pluymers, B. / Vercammen, S.	Analytical solution for free vibrations of rotating cylindrical shells having free boundary conditions	152-171
Lam, Heung-Fai / Hu, Jun / Yang, Jia-Hua	Bayesian operational modal analysis and Markov chain Monte Carlo-based model updating of a factory building	314-336
Bahrami, Saeed / Madhkhan, Morteza / Shirmohammadi, Fatemeh / Nazemi, Nima	Behavior of two new moment resisting precast beam to column connections subjected to lateral loading	808-821
Boccadoro, Lorenzo / Zweidler, Simon / Steiger, René / Frangi, Andrea	Bending tests on timber-concrete composite members made of beech laminated veneer lumber with notched connection	14-28
Feng, Peng / Hu, Lili / Qian, Peng / Ye, Lieping	Buckling behavior of CFRP-aluminum alloy hybrid tubes in axial compression	624-636
Wang, Q. / Nakamura, S. / Okumatsu, T. / Nishikawa, T.	Comprehensive investigation on the cause of a critical crack found in a diagonal member of a steel truss bridge	659-670
Obaidat, Ala' T. / Abo El Ezz, Ahmad / Galal, Khaled	Compression behavior of confined concrete masonry boundary elements	562-575
Eid, Rami / Paultre, Patrick	Compressive behavior of FRP-confined reinforced concrete columns	518-530
Chisari, Corrado / Francavilla, Antonella B. / Latour, Massimo / Piluso, Vincenzo / Rizzano, Gianvittorio / Amadio, Claudio	Critical issues in parameter calibration of cyclic models for steel members	123-138
Roy, Biswajit / Laskar, Aminul Islam	Cyclic behavior of in-situ exterior beam-column subassemblies with cold joint in column	822-833
Yuniarsyah, Eko / Kono, Susumu / Tani, Masanori / Taleb, Rafik / Sugimoto, Kuniyoshi / Mukai, Tomohisa	Damage evaluation of lightly reinforced concrete walls in moment resisting frames under seismic loading	349-371
Habte, Filmon / Chowdhury, Arindam Gan / Yeo, DongHun / Simiu, Emil	Design of rigid structures for wind using time series of demand-to-capacity indexes: Application to steel portal frames	428-442
Zhen, Liang / Qiao, Pizhong / Zhong, Junbin / Chen, Qingyuan / Chen, Jin-Jian / Wang, Jian-Hua	Design of steel pipe-jacking based on buckling analysis by finite strip method	139-151
Luu, C. H. / Mo, Y. L. / Hsu, Thomas T. C.	Development of CSMM-based shell element for reinforced concrete structures	778-790
Moliner, E. / Martínez-Rodrigo, M. D. / Museros, P.	Dynamic performance of existing double track railway bridges at resonance with the increase of the operational line speed	98-109
Zuo, Delong / Wu, Liang / Smith, Douglas A. / Morse, Stephen M.	Experimental and analytical study of galloping of a slender tower	44-60
Zhang, Xiangcheng / Zhang, Xu / Zhao, Yixiao / Zhao, Jun / Xu, Zhaodong	Experimental and numerical studies on a composite MR damper considering magnetic saturation effect	576-585
Cui, Ye / Lu, Xilin / Jiang, Chun	Experimental investigation of tri-axial self-centering reinforced concrete frame structures through shaking table tests	684-694
Cavaco, Eduardo / Camara, José	Experimental research on the behaviour of concrete-to-concrete interfaces subjected to a combination of shear and bending moment	278-287
Wang, Yang / Jia, Jinsheng	Experimental study on the influence of hydraulic fracturing on high concrete gravity dams	508-517
Chae, Yunbyeong / Park, Minseok / Kim, Chul-Young / Park, Young Suk	Experimental study on the rate-dependency of reinforced concrete structures using slow and real-time hybrid simulations	648-658
Shim, Changsu / Lee, Sangyong / Park, Seongjun / Koem, Chandara	Experiments on prefabricated segmental bridge piers with continuous longitudinal reinforcing bars	671-683
Sousa, Carlos / Leitão, Luís / Faria, Rui / Azenha, Miguel	A formulation to reduce mesh dependency in FE analyses of RC structures under imposed deformations	443-455
Chomchuen, Prakit / Boonyapinyo, Virote	Incremental dynamic analysis with multi-modes for seismic performance evaluation of RC bridges	29-43
Loss, Cristiano / Davison, Buick	Innovative composite steel-timber floors with prefabricated modular components	695-713
Castellazzi, Giovanni / D'Altri, Antonio Maria / de Miranda, Stefano / Ubertini, Francesco	An innovative numerical modeling strategy for the structural analysis of historical monumental buildings	229-248
Mesnil, Romain / Douthe, Cyril / Baverel, Olivier / Leger, Bruno	Linear buckling of quadrangular and kagome gridshells: A comparative assessment	337-348
Repetto, Maria Pia / Torrielli, Alessio	Long term simulation of wind-induced fatigue loadings	551-561
Preti, Marco / Bolis, Valentino	Masonry infill construction and retrofit technique for the infill-frame interaction mitigation: Test results	597-608
Alfouneh, Mahmoud / Tong, Liyong	Maximizing modal damping in layered structures via multi-objective topology optimization	637-647
Hu, Yu / Chen, Wujun / Chen, Yufeng / Zhang, Daxu / Qiu, Zhenyu	Modal behaviors and influencing factors analysis of inflated membrane structures	413-427
Alfarah, B. / López-Almansa, F. / Oller, S.	New methodology for calculating damage variables evolution in Plastic Damage Model for RC structures	70-86
Pérez-Ocón, F. / Pozo, A. M. / Rabaza, O.	New obstruction lighting system for aviation safety	531-539
Shoeibi, Shahrokh / Kafi, Mohammad Ali / Gholhaki, Majid	New performance-based seismic design method for structures with structural fuse system	745-760
Asteris, P. G. / Cavaleri, L. / Di Trapani, F. / Tsaris, A. K.	Numerical modelling of out-of-plane response of infilled frames: State of the art and future challenges for the equivalent strut macromodels	110-122
Cha, Y.-J. / Chen, J. G. / Buyukozturk, O.	Output-only computer vision based damage detection using phase-based optical flow and unscented Kalman filters	300-313
Goodey, R. J. / Brown, C. J. / Rotter, J. M.	Rectangular steel silos: Finite element predictions of filling wall pressures	61-69
Rinaldin, G. / Amadio, C. / Gattesco, N.	Review of experimental cyclic tests on unreinforced and strengthened masonry spandrels and numerical modelling of their cyclic behaviour	609-623
Monteiro, A. / Arêde, A. / Vila Pouca, N.	Seismic behavior of coupled column bridge RC piers: Experimental campaign	399-412
Zhao, Junxian / Lin, Fuxiong / Wang, Zhan	Seismic design of buckling-restrained brace welded end connection considering frame action effects: Theoretical, numerical and practical approaches	761-777
Wu, Yuntian / Zhang, Jie / Yang, Yeong-bin / Ye, Peng / Xiao, Yan	Seismic performance of reinforced concrete squat walls with embedded cold-formed and thin walled steel truss	714-732
Negro, Paolo / Lamperti Tornaghi, Marco	Seismic response of precast structures with vertical cladding panels: The SAFECLADDING experimental campaign	205-228
Ferreiro-Cabello, J. / Fraile-García, E. / Martinez-Camara, E. / Perez-de-la-Parte, M.	Sensitivity analysis of Life Cycle Assessment to select reinforced concrete structures with one-way slabs	586-596
Ramnavas, M. P. / Patel, K. A. / Chaudhary, Sandeep / Nagpal, A. K.	Service load analysis of composite frames using cracked span length frame element	733-744
Tian, Li / Gai, Xia / Qu, Bing	Shake table tests of steel towers supporting extremely long-span electricity transmission lines under spatially correlated ground motions	791-807
Landesmann, Alexandre / Camotim, Dinar / Dinis, Pedro B. / Cruz, Renato	Short-to-intermediate slender pin-ended cold-formed steel equal-leg angle columns: Experimental investigation, numerical simulations and DSM design	471-493
Hopkins, Paul M. / Chen, An / Yossef, Mostafa	Static and dynamic analyses of insulated concrete sandwich panels using a unified non-linear finite element model	249-259
Fernandes, Hugo / Lúcio, Válter / Ramos, António	Strengthening of RC slabs with reinforced concrete overlay on the tensile face	540-550
Xiao, Jianzhuang / Ding, Tao / Zhang, Qingtian	Structural behavior of a new moment-resisting DfD concrete connection	1-13
Ehsani, Behrang / Toopchi-Nezhad, Hamid	Systematic design of unbonded fiber reinforced elastomeric isolators	383-398
Arshian, Amir Hossein / Morgenthal, Guido	Three-dimensional progressive collapse analysis of reinforced concrete frame structures subjected to sequential column removal	87-97
Ballaben, Jorge S. / Sampaio, Rubens / Rosales, Marta B.	Uncertainty quantification in the dynamics of a guyed mast subjected to wind load	456-470
Málaga-Chuquitaype, C. / Bougatsas, K.	Vector-IM-based assessment of alternative framing systems under bi-directional ground-motion	188-204
Choi, Eunsoo / Youn, Heejung / Park, Kyoungsoo / Jeon, Jong-Su	Vibration tests of precompressed rubber springs and a flag-shaped smart damper	372-382
Yin, Tao / Jiang, Qing-Hui / Yuen, Ka-Veng	Vibration-based damage detection for structural connections using incomplete modal data by Bayesian approach and model reduction technique	260-277
Hung, Chung-Chan / Yau, Wen-Gi	Vulnerability evaluation of scoured bridges under floods	288-299
Shahsavari, Vahid / Chouinard, Luc / Bastien, Josée	Wavelet-based analysis of mode shapes for statistical detection and localization of damage in beams using likelihood ratio test	494-507

Über diese
Datenseite
IssueID
17518
Veröffentlicht am:
06.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - Februar 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - Februar 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.