Engineering Structures - v. 33, n. 12 (December 2011)

Published:	December 2011

Articles in this Issue

Author(s)	Title	Page(s)
Ozbulut, Osman E. / Bitaraf, Maryam / Hurlebaus, Stefan	Adaptive control of base-isolated structures against near-field earthquakes using variable friction dampers	3143-3154
Fong, M. / Chan, S. L. / Uy, B.	Advanced design for trusses of steel and concrete-filled tubular sections	3162-3171
Branco, Miguel M. / Kelly, James M. / Guerreiro, Luís M.	An algorithm to simulate the one-dimensional superelastic cyclic behavior of NiTi strings, for civil engineering applications	3737-3747
Ben Ayed, S. / Aponte-Bermudez, L. D. / Hajj, M. R. / Tieleman, H. W. / Gurley, K. R. / Reinhold, T. A.	Analysis of hurricane wind loads on low-rise structures	3590-3596
Jayasooriya, Ruwan / Thambiratnam, David P. / Perera, Nimal J. / Kosse, Vladis	Blast and residual capacity analysis of reinforced concrete framed buildings	3483-3495
Chen, Lei / Rotter, J. Michael / Doerich, Cornelia	Buckling of cylindrical shells with stepwise variable wall thickness under uniform external pressure	3570-3578
Machacek, Josef / Cudejko, Martin	Composite steel and concrete bridge trusses	3136-3142
Paredes, Jairo A. / Barbat, Alex H. / Oller, Sergio	A compression–tension concrete damage model, applied to a wind turbine reinforced concrete tower	3559-3569
Aiello, Salvatore / Campione, Giuseppe / Minafò, Giovanni / Scibilia, Nunzio	Compressive behaviour of laminated structural glass members	3402-3408
Chen, L. / Yeap, K. B. / She, C. M. / Liu, G. R.	A computational and experimental investigation of three-dimensional micro-wedge indentation-induced interfacial delamination in a soft-film-on-hard-substrate system	3269-3278
Ohsaki, M. / Nakajima, T. / Fujiwara, J. / Takeda, F.	Configuration optimization of clamping members of frame-supported membrane structures	3620-3627
Pircher, Martin / Lechner, Bernhard / Mariani, Oliver / Kammersberger, Andreas	Damage due to heavy traffic on three RC road bridges	3755-3761
Ashraf, Mahmud / Young, Ben	Design formulations for non-welded and welded aluminium columns using Continuous Strength Method	3197-3207
Mitropoulou, Chara Ch. / Papadrakakis, Manolis	Developing fragility curves based on neural network IDA predictions	3409-3421
Saidi, I. / Gad, E. F. / Wilson, J. L. / Haritos, N.	Development of passive viscoelastic damper to attenuate excessive floor vibrations	3317-3328
Scullion, Tom / Ali, Faris / Nadjai, Ali	Effect of axial restraint on the performance of Elliptical Hollow Section steel columns, in hydrocarbon fire	3155-3161
Bu, Wensheng / Polak, Maria Anna	Effect of openings and shear bolt pattern in seismic retrofit of reinforced concrete slab–column connections	3329-3340
Fujita, Kohei / Takewaki, Izuru	An efficient methodology for robustness evaluation by advanced interval analysis using updated second-order Taylor series expansion	3299-3310
Lukkunaprasit, P. / Tangbunchoo, T. / Rodsin, K.	Enhancement of seismic performance of reinforced concrete columns with buckling-restrained reinforcement	3311-3316
Keitel, Holger / Karaki, Ghada / Lahmer, Tom / Nikulla, Susanne / Zabel, Volkmar	Evaluation of coupled partial models in structural engineering using graph theory and sensitivity analysis	3726-3736
Hatzigeorgiou, George D. / Papagiannopoulos, George A. / Beskos, Dimitri E.	Evaluation of maximum seismic displacements of SDOF systems from their residual deformation	3422-3431
Barrera, A. C. / Bonet, J. L. / Romero, M. L. / Miguel, P. F.	Experimental tests of slender reinforced concrete columns under combined axial load and lateral force	3676-3689
Chen, Z. W. / Xu, Y. L. / Xia, Y. / Li, Q. / Wong, K. Y.	Fatigue analysis of long-span suspension bridges under multiple loading: Case study	3246-3256
Bui, Q.-B. / Hans, S. / Morel, J.-C. / Do, A.-P.	First exploratory study on dynamic characteristics of rammed earth buildings	3690-3695
Hein, H. / Feklistova, L.	Free vibrations of non-uniform and axially functionally graded beams using Haar wavelets	3696-3701
Torkamani, Morteza A. M. / Shieh, Jyh-Hung	Higher-order stiffness matrices in nonlinear finite element analysis of plane truss structures	3516-3526
Langdon, G. S. / Nurick, G. N. / du Plessis, N. J.	The influence of separation distance on the performance of perforated plates as a blast wave shielding technique	3537-3545
Bui, Tinh Quoc / Nguyen, Minh Ngoc / Zhang, Chuanzeng	A meshfree model without shear-locking for free vibration analysis of first-order shear deformable plates	3364-3380
Martinelli, Enzo / Czaderski, Christoph / Motavalli, Masoud	Modeling in-plane and out-of-plane displacement fields in pull-off tests on FRP strips	3715-3725
Castel, Arnaud / François, Raoul	Modeling of steel and concrete strains between primary cracks for the prediction of cover-controlled cracking in RC-beams	3668-3675
Shanmugam, Bagyalakshmi / Nielson, Bryant G. / Schiff, Scott D.	Multi-axis treatment of typical light-frame wood roof-to-wall metal connectors in design	3125-3135
Haach, Vladimir G. / Vasconcelos, Graça / Lourenço, Paulo B.	Numerical analysis of concrete block masonry beams under three point bending	3226-3237
Kim, Yail J. / Fam, Amir	Numerical analysis of pultruded GFRP box girders supporting adhesively-bonded concrete deck in flexure	3527-3536
Mirtaheri, Masoud / Peyman Zandi, Amir / Samadi, Sahand Sharifi / Samani, Hamid Rahmani	Numerical and experimental study of hysteretic behavior of cylindrical friction dampers	3647-3656
Audebert, M. / Dhima, D. / Taazount, M. / Bouchaïr, A.	Numerical investigations on the thermo-mechanical behavior of steel-to-timber joints exposed to fire	3257-3268
Georgiadi-Stefanidi, K. / Mistakidis, E. / Perdikaris, P. / Papatheocharis, T.	Numerical simulation of the nonlinear bending response of fibre-reinforced cementitious matrix beams and comparison with experimental results	3579-3589
Dimitri, R. / de Lorenzis, L. / Zavarise, G.	Numerical study on the dynamic behavior of masonry columns and arches on buttresses with the discrete element method	3172-3188
Taflanidis, Alexandros A.	Optimal probabilistic design of seismic dampers for the protection of isolated bridges against near-fault seismic excitations	3496-3508
Warn, Gordon P. / Weisman, Jared	Parametric finite element investigation of the critical load capacity of elastomeric strip bearings	3509-3515
Bocchini, Paolo / Frangopol, Dan M. / Deodatis, George	A random field based technique for the efficiency enhancement of bridge network life-cycle analysis under uncertainty	3208-3217
Zhang, Zhichao / Zhang, Yahui / Lin, Jiahao / Zhao, Yan / Howson, W. P. / Williams, F. W.	Random vibration of a train traversing a bridge subjected to traveling seismic waves	3546-3558
Dion, Cassandra / Bouaanani, Najib / Tremblay, Robert / Lamarche, Charles-Philippe / Leclerc, Martin	Real-time dynamic substructuring testing of viscous seismic protective devices for bridge structures	3351-3363
Riahi, H. / Bressolette, Ph. / Chateauneuf, A. / Bouraoui, Ch. / Fathallah, R.	Reliability analysis and inspection updating by stochastic response surface of fatigue cracks in mixed mode	3392-3401
Henderson, David J. / Ginger, John D.	Response of pierced fixed corrugated steel roofing systems subjected to wind loads	3290-3298
Araki, Yoshikazu / Kawabata, Shinya / Asai, Takehiko / Masui, Takeshi	Response of vibration-isolated object to ground motions with intense vertical accelerations	3610-3619
Kilar, Vojko / Petrovčič, Simon / Koren, David / Šilih, Simon	Seismic analysis of an asymmetric fixed base and base-isolated high-rack steel structure	3471-3482
Bisadi, Vahid / Head, Monique / Cline, Daren B. H.	Seismic effects of elevating bridges with steel pedestals in the southeastern United States	3279-3289
Dowell, Robert K. / Johnson, Timothy P.	Shear and bending flexibility in closed-form moment solutions for continuous beams and bridge structures	3238-3245
Xia, Jun / Mackie, Kevin R. / Saleem, Muhammad A. / Mirmiran, Amir	Shear failure analysis on ultra-high performance concrete beams reinforced with high strength steel	3597-3609
Bassam, Asaollah / Iranmanesh, Amirhossein / Ansari, Farhad	A simple quantitative approach for post earthquake damage assessment of flexure dominant reinforced concrete bridges	3218-3225
Ingólfsson, E. T. / Georgakis, C. T.	A stochastic load model for pedestrian-induced lateral forces on footbridges	3454-3470
Bisby, L. A. / Chen, J. F. / Li, S. Q. / Stratford, T. J. / Cueva, N. / Crossling, K.	Strengthening fire-damaged concrete by confinement with fibre-reinforced polymer wraps	3381-3391
Harte, A. M. / Baylor, G.	Structural evaluation of castellated timber -joists	3748-3754
Chen, W. H. / Lu, Z. R. / Lin, W. / Chen, S. H. / Ni, Y. Q. / Xia, Y. / Liao, W. Y.	Theoretical and experimental modal analysis of the Guangzhou New TV Tower	3628-3646
Bernardo, L. F. A. / Lopes, S. M. R.	Theoretical behavior of HSC sections under torsion	3702-3714
Azenha, Miguel / Sousa, Carlos / Faria, Rui / Neves, Afonso	Thermo–hygro–mechanical modelling of self-induced stresses during the service life of RC structures	3442-3453
Salem, H. M. / El-Fouly, A. K. / Tagel-Din, H. S.	Toward an economic design of reinforced concrete structures against progressive collapse	3341-3350
Dolatshahi, Kiarash M. / Aref, Amjad J.	Two-dimensional computational framework of meso-scale rigid and line interface elements for masonry structures	3657-3667
Juarez, C. A. / Guevara, B. / Fajardo, G. / Castro-Borges, P.	Ultimate and nominal shear strength in reinforced concrete beams deteriorated by corrosion	3189-3196
Carpinteri, A. / Corrado, M.	Upper and lower bounds for structural design of RC members with ductile response	3432-3441

About this
data sheet
IssueID
17439
Published on:
06/12/2018
Last updated on:
06/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - v. 33, n. 12 (December 2011)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - v. 33, n. 12 (December 2011)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.