Engineering Structures - v. 33, n. 12 (Dezember 2011)

Erschienen:	Dezember 2011

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Ozbulut, Osman E. / Bitaraf, Maryam / Hurlebaus, Stefan	Adaptive control of base-isolated structures against near-field earthquakes using variable friction dampers	3143-3154
Fong, M. / Chan, S. L. / Uy, B.	Advanced design for trusses of steel and concrete-filled tubular sections	3162-3171
Branco, Miguel M. / Kelly, James M. / Guerreiro, Luís M.	An algorithm to simulate the one-dimensional superelastic cyclic behavior of NiTi strings, for civil engineering applications	3737-3747
Ben Ayed, S. / Aponte-Bermudez, L. D. / Hajj, M. R. / Tieleman, H. W. / Gurley, K. R. / Reinhold, T. A.	Analysis of hurricane wind loads on low-rise structures	3590-3596
Jayasooriya, Ruwan / Thambiratnam, David P. / Perera, Nimal J. / Kosse, Vladis	Blast and residual capacity analysis of reinforced concrete framed buildings	3483-3495
Chen, Lei / Rotter, J. Michael / Doerich, Cornelia	Buckling of cylindrical shells with stepwise variable wall thickness under uniform external pressure	3570-3578
Machacek, Josef / Cudejko, Martin	Composite steel and concrete bridge trusses	3136-3142
Paredes, Jairo A. / Barbat, Alex H. / Oller, Sergio	A compression–tension concrete damage model, applied to a wind turbine reinforced concrete tower	3559-3569
Aiello, Salvatore / Campione, Giuseppe / Minafò, Giovanni / Scibilia, Nunzio	Compressive behaviour of laminated structural glass members	3402-3408
Chen, L. / Yeap, K. B. / She, C. M. / Liu, G. R.	A computational and experimental investigation of three-dimensional micro-wedge indentation-induced interfacial delamination in a soft-film-on-hard-substrate system	3269-3278
Ohsaki, M. / Nakajima, T. / Fujiwara, J. / Takeda, F.	Configuration optimization of clamping members of frame-supported membrane structures	3620-3627
Pircher, Martin / Lechner, Bernhard / Mariani, Oliver / Kammersberger, Andreas	Damage due to heavy traffic on three RC road bridges	3755-3761
Ashraf, Mahmud / Young, Ben	Design formulations for non-welded and welded aluminium columns using Continuous Strength Method	3197-3207
Mitropoulou, Chara Ch. / Papadrakakis, Manolis	Developing fragility curves based on neural network IDA predictions	3409-3421
Saidi, I. / Gad, E. F. / Wilson, J. L. / Haritos, N.	Development of passive viscoelastic damper to attenuate excessive floor vibrations	3317-3328
Scullion, Tom / Ali, Faris / Nadjai, Ali	Effect of axial restraint on the performance of Elliptical Hollow Section steel columns, in hydrocarbon fire	3155-3161
Bu, Wensheng / Polak, Maria Anna	Effect of openings and shear bolt pattern in seismic retrofit of reinforced concrete slab–column connections	3329-3340
Fujita, Kohei / Takewaki, Izuru	An efficient methodology for robustness evaluation by advanced interval analysis using updated second-order Taylor series expansion	3299-3310
Lukkunaprasit, P. / Tangbunchoo, T. / Rodsin, K.	Enhancement of seismic performance of reinforced concrete columns with buckling-restrained reinforcement	3311-3316
Keitel, Holger / Karaki, Ghada / Lahmer, Tom / Nikulla, Susanne / Zabel, Volkmar	Evaluation of coupled partial models in structural engineering using graph theory and sensitivity analysis	3726-3736
Hatzigeorgiou, George D. / Papagiannopoulos, George A. / Beskos, Dimitri E.	Evaluation of maximum seismic displacements of SDOF systems from their residual deformation	3422-3431
Barrera, A. C. / Bonet, J. L. / Romero, M. L. / Miguel, P. F.	Experimental tests of slender reinforced concrete columns under combined axial load and lateral force	3676-3689
Chen, Z. W. / Xu, Y. L. / Xia, Y. / Li, Q. / Wong, K. Y.	Fatigue analysis of long-span suspension bridges under multiple loading: Case study	3246-3256
Bui, Q.-B. / Hans, S. / Morel, J.-C. / Do, A.-P.	First exploratory study on dynamic characteristics of rammed earth buildings	3690-3695
Hein, H. / Feklistova, L.	Free vibrations of non-uniform and axially functionally graded beams using Haar wavelets	3696-3701
Torkamani, Morteza A. M. / Shieh, Jyh-Hung	Higher-order stiffness matrices in nonlinear finite element analysis of plane truss structures	3516-3526
Langdon, G. S. / Nurick, G. N. / du Plessis, N. J.	The influence of separation distance on the performance of perforated plates as a blast wave shielding technique	3537-3545
Bui, Tinh Quoc / Nguyen, Minh Ngoc / Zhang, Chuanzeng	A meshfree model without shear-locking for free vibration analysis of first-order shear deformable plates	3364-3380
Martinelli, Enzo / Czaderski, Christoph / Motavalli, Masoud	Modeling in-plane and out-of-plane displacement fields in pull-off tests on FRP strips	3715-3725
Castel, Arnaud / François, Raoul	Modeling of steel and concrete strains between primary cracks for the prediction of cover-controlled cracking in RC-beams	3668-3675
Shanmugam, Bagyalakshmi / Nielson, Bryant G. / Schiff, Scott D.	Multi-axis treatment of typical light-frame wood roof-to-wall metal connectors in design	3125-3135
Haach, Vladimir G. / Vasconcelos, Graça / Lourenço, Paulo B.	Numerical analysis of concrete block masonry beams under three point bending	3226-3237
Kim, Yail J. / Fam, Amir	Numerical analysis of pultruded GFRP box girders supporting adhesively-bonded concrete deck in flexure	3527-3536
Mirtaheri, Masoud / Peyman Zandi, Amir / Samadi, Sahand Sharifi / Samani, Hamid Rahmani	Numerical and experimental study of hysteretic behavior of cylindrical friction dampers	3647-3656
Audebert, M. / Dhima, D. / Taazount, M. / Bouchaïr, A.	Numerical investigations on the thermo-mechanical behavior of steel-to-timber joints exposed to fire	3257-3268
Georgiadi-Stefanidi, K. / Mistakidis, E. / Perdikaris, P. / Papatheocharis, T.	Numerical simulation of the nonlinear bending response of fibre-reinforced cementitious matrix beams and comparison with experimental results	3579-3589
Dimitri, R. / de Lorenzis, L. / Zavarise, G.	Numerical study on the dynamic behavior of masonry columns and arches on buttresses with the discrete element method	3172-3188
Taflanidis, Alexandros A.	Optimal probabilistic design of seismic dampers for the protection of isolated bridges against near-fault seismic excitations	3496-3508
Warn, Gordon P. / Weisman, Jared	Parametric finite element investigation of the critical load capacity of elastomeric strip bearings	3509-3515
Bocchini, Paolo / Frangopol, Dan M. / Deodatis, George	A random field based technique for the efficiency enhancement of bridge network life-cycle analysis under uncertainty	3208-3217
Zhang, Zhichao / Zhang, Yahui / Lin, Jiahao / Zhao, Yan / Howson, W. P. / Williams, F. W.	Random vibration of a train traversing a bridge subjected to traveling seismic waves	3546-3558
Dion, Cassandra / Bouaanani, Najib / Tremblay, Robert / Lamarche, Charles-Philippe / Leclerc, Martin	Real-time dynamic substructuring testing of viscous seismic protective devices for bridge structures	3351-3363
Riahi, H. / Bressolette, Ph. / Chateauneuf, A. / Bouraoui, Ch. / Fathallah, R.	Reliability analysis and inspection updating by stochastic response surface of fatigue cracks in mixed mode	3392-3401
Henderson, David J. / Ginger, John D.	Response of pierced fixed corrugated steel roofing systems subjected to wind loads	3290-3298
Araki, Yoshikazu / Kawabata, Shinya / Asai, Takehiko / Masui, Takeshi	Response of vibration-isolated object to ground motions with intense vertical accelerations	3610-3619
Kilar, Vojko / Petrovčič, Simon / Koren, David / Šilih, Simon	Seismic analysis of an asymmetric fixed base and base-isolated high-rack steel structure	3471-3482
Bisadi, Vahid / Head, Monique / Cline, Daren B. H.	Seismic effects of elevating bridges with steel pedestals in the southeastern United States	3279-3289
Dowell, Robert K. / Johnson, Timothy P.	Shear and bending flexibility in closed-form moment solutions for continuous beams and bridge structures	3238-3245
Xia, Jun / Mackie, Kevin R. / Saleem, Muhammad A. / Mirmiran, Amir	Shear failure analysis on ultra-high performance concrete beams reinforced with high strength steel	3597-3609
Bassam, Asaollah / Iranmanesh, Amirhossein / Ansari, Farhad	A simple quantitative approach for post earthquake damage assessment of flexure dominant reinforced concrete bridges	3218-3225
Ingólfsson, E. T. / Georgakis, C. T.	A stochastic load model for pedestrian-induced lateral forces on footbridges	3454-3470
Bisby, L. A. / Chen, J. F. / Li, S. Q. / Stratford, T. J. / Cueva, N. / Crossling, K.	Strengthening fire-damaged concrete by confinement with fibre-reinforced polymer wraps	3381-3391
Harte, A. M. / Baylor, G.	Structural evaluation of castellated timber -joists	3748-3754
Chen, W. H. / Lu, Z. R. / Lin, W. / Chen, S. H. / Ni, Y. Q. / Xia, Y. / Liao, W. Y.	Theoretical and experimental modal analysis of the Guangzhou New TV Tower	3628-3646
Bernardo, L. F. A. / Lopes, S. M. R.	Theoretical behavior of HSC sections under torsion	3702-3714
Azenha, Miguel / Sousa, Carlos / Faria, Rui / Neves, Afonso	Thermo–hygro–mechanical modelling of self-induced stresses during the service life of RC structures	3442-3453
Salem, H. M. / El-Fouly, A. K. / Tagel-Din, H. S.	Toward an economic design of reinforced concrete structures against progressive collapse	3341-3350
Dolatshahi, Kiarash M. / Aref, Amjad J.	Two-dimensional computational framework of meso-scale rigid and line interface elements for masonry structures	3657-3667
Juarez, C. A. / Guevara, B. / Fajardo, G. / Castro-Borges, P.	Ultimate and nominal shear strength in reinforced concrete beams deteriorated by corrosion	3189-3196
Carpinteri, A. / Corrado, M.	Upper and lower bounds for structural design of RC members with ductile response	3432-3441

Über diese
Datenseite
IssueID
17439
Veröffentlicht am:
06.12.2018
Geändert am:
06.12.2018

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - v. 33, n. 12 (Dezember 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - v. 33, n. 12 (Dezember 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.