Engineering Structures - November 2013

Published:	November 2013

Articles in this Issue

Author(s)	Title	Page(s)
Hallak, Patricia H. / Pfeil, Michèle S. / de Oliveira, Sergio R. C. / Battista, Ronaldo C. / de Sampaio, Paulo A. B. / Bezerra, Carolina M. N.	Aerodynamic behavior analysis of Rio-Niterói bridge by means of computational fluid dynamics	935-944
Baby, Florent / Marchand, Pierre / Atrach, Mohammed / Toutlemonde, François	Analysis of flexure-shear behavior of UHPFRC beams based on stress field approach	194-206
Cañas-Guerrero, Ignacio / Mazarrón, Fernando R. / Pou-Merina, Ana / Calleja-Perucho, Cruz / Suárez-Tejero, María Fernanda	Analysis of research activity in the field "Engineering, Civil" through bibliometric methods	2273-2286
Olmos, José M. / Astiz, Miguel A.	Analysis of the lateral dynamic response of high pier viaducts under high-speed train travel	1384-1401
Darehshouri, S. F. / Shanmugam, N. E. / Osman, S. A.	An analytical method for ultimate shear strength of composite plate girders with web openings	610-620
Nguyen, Quang Tung / Thomas, Jean-Christophe / Le van, Anh	An analytical solution for an inflated orthotropic membrane tube with an arbitrarily oriented orthotropy basis	1080-1091
Benyamina, Abdelrahmane Bekaddour / Meftah, Sid Ahmed / Mohri, Foudil / Daya, El Mostafa	Analytical solutions attempt for lateral torsional buckling of doubly symmetric web-tapered I-beams	1207-1219
Kodur, Venkatesh / Khaliq, Wasim / Raut, Nikhil	An approach to account for tie configuration in predicting fire resistance of reinforced concrete columns	1976-1985
Teixeira, A. P. / Ivanov, L. D. / Guedes Soares, C.	Assessment of characteristic values of the ultimate strength of corroded steel plates with initial imperfections	517-527
Tangaramvong, S. / Tin-Loi, F.	Automatic identification of the worst load combination for structural safety assessment using an optimization approach	2287-2298
Ding, Y. / Law, S. S. / Wu, B. / Xu, G. S. / Lin, Q. / Jiang, H. B. / Miao, Q. S.	Average acceleration discrete algorithm for force identification in state space	1880-1892
Jørgensen, Caroline / Grastveit, Ragnhild / Garzón-Roca, Julio / Payá-Zaforteza, Ignacio / Adam, José M.	Bearing capacity of steel-caged RC columns under combined bending and axial loads: Estimation based on Artificial Neural Networks	1262-1270
Rajani, Balvant / Abdel-Akher, Ahmed	Behavior and response of lead-caulked bell–spigot joints in cast iron water mains	2005-2013
Hassanein, M. F. / Kharoob, O. F. / Liang, Q. Q.	Behaviour of circular concrete-filled lean duplex stainless steel–carbon steel tubular short columns	83-94
Bihina, G. / Zhao, B. / Bouchaïr, A.	Behaviour of composite steel–concrete cellular beams in fire	2217-2228
Higgins, Lee / Forth, John P. / Neville, Anne / Jones, Rod / Hodgson, Trevor	Behaviour of cracked reinforced concrete beams under repeated and sustained load types	457-465
Begum, Mahbuba / Driver, Robert G. / Elwi, Alaa E.	Behaviour of partially encased composite columns with high strength concrete	1718-1727
Segura-Castillo, Luis / Aguado, Antonio / Josa, Alejandro	Bi-layer diaphragm walls: Experimental and numerical structural analysis	154-164
Zhang, S. S. / Teng, J. G. / Yu, T.	Bond–slip model for CFRP strips near-surface mounted to concrete	945-953
Beatini, Valentina / Royer-Carfagni, Gianni	Cable-stiffened foldable elastica for movable structures	126-136
Annan, Charles-Darwin / Chiza, Albert	Characterization of slip resistance of high strength bolted connections with zinc-based metallized faying surfaces	2187-2196
Milani, Gabriele / Esquivel, Yhosimi W. / Lourenço, Paulo B. / Riveiro, Belén / Oliveira, Daniel V.	Characterization of the response of quasi-periodic masonry: Geometrical investigation, homogenization and application to the Guimarães castle, Portugal	621-641
Almeida, Valério S. / Simonetti, Hélio Luiz / Neto, Luttgardes Oliveira	Comparative analysis of strut-and-tie models using Smooth Evolutionary Structural Optimization	1665-1675
Vázquez-Herrero, Cristina / Martínez-Lage, Isabel / Vázquez-Vázquez, Humberto / Martínez-Abella, Fernando	Comparative study of the flexural behavior of lightweight and normal weight prestressed concrete beams	1868-1879
Saravia, C. Martín / Machado, Sebastián P. / Cortinez, Victor H.	A composite beam finite element for multibody dynamics: Application to large wind turbine modeling	1164-1176
Soleymani Ashtiani, M. / Dhakal, R. P. / Scott, A. N. / Bull, D. K.	Cyclic beam bending test for assessment of bond–slip behaviour	1684-1697
Kang, Su-Min / Kim, Ook-Jong / Park, Hong-Gun	Cyclic loading test for emulative precast concrete walls with partially reduced rebar section	1645-1657
Pan, Peng / Lam, Alexandre / Lin, Xuchuan / Li, Yixin / Ye, Lieping	Cyclic loading tests and finite element analyses on performance of ring beam connections	682-690
Dincal, S. / Stubbs, N.	Damage evaluation of Timoshenko beams using invariant stress resultants	2052-2064
Gribniak, Viktor / Cervenka, Vladimir / Kaklauskas, Gintaris	Deflection prediction of reinforced concrete beams by design codes and computer simulation	2175-2186
Sahoo, Dipti Ranjan / Rai, Durgesh C.	Design and evaluation of seismic strengthening techniques for reinforced concrete frames with soft ground story	1933-1944
Tso, M. H. / Yuan, J. / Wong, W. O.	Design and experimental study of a hybrid vibration absorber for global vibration control	1058-1069
Robinson, Gary P. / Palmeri, Alessandro / Austin, Simon A.	Design methodologies for one way spanning eccentrically loaded minimally or centrally reinforced pre-cast RC panels	1945-1956
Choi, H.-K. / Choi, Y.-C. / Choi, C.-S.	Development and testing of precast concrete beam-to-column connections	1820-1835
Wu, Tung-Yueh	Dynamic nonlinear analysis of shell structures using a vector form intrinsic finite element	2028-2040
Staino, A. / Basu, B.	Dynamics and control of vibrations in wind turbines with variable rotor speed	58-67
Lancioni, Giovanni / Lenci, Stefano / Piattoni, Quintilio / Quagliarini, Enrico	Dynamics and failure mechanisms of ancient masonry churches subjected to seismic actions by using the NSCD method: The case of the medieval church of S. Maria in Portuno	1527-1546
Zhu, Wenjun / François, Raoul / Coronelli, Dario / Cleland, David	Effect of corrosion of reinforcement on the mechanical behaviour of highly corroded RC beams	544-554
Maniatakis, Charilaos A. / Psycharis, Ioannis N. / Spyrakos, Constantine C.	Effect of higher modes on the seismic response and design of moment-resisting RC frame structures	417-430
Hmidan, Amer / Kim, Yail J. / Yazdani, Siamak	Effect of sustained load combined with cold temperature on flexure of damaged steel beams repaired with CFRP sheets	1957-1966
López-Aenlle, M. / Pelayo, F. / Fernández-Canteli, A. / García Prieto, M. A.	The effective-thickness concept in laminated-glass elements under static loading	1092-1102
Deifalla, A. / Awad, A. / Elgarhy, M.	Effectiveness of externally bonded CFRP strips for strengthening flanged beams under torsion: An experimental study	2065-2075
Kostinakis, K. G. / Athanatopoulou, A. M. / Tsiggelis, V. S.	Effectiveness of percentage combination rules for maximum response calculation within the context of linear time history analysis	36-45
Artioli, E. / Battaglia, R. / Tralli, A.	Effects of May 2012 Emilia earthquake on industrial buildings of early '900 on the Po river line	1220-1233
Di Sarno, L.	Effects of multiple earthquakes on inelastic structural response	673-681
Nelson, Mark / Eldridge, Amanda / Fam, Amir	The effects of splices and bond on performance of bridge deck with FRP stay-in-place forms at various boundary conditions	509-516
To, Cho W. S. / Ingale, Nitin B. / Fu, Jiming	Equivalent bulging factors of internally pressurized cracked laminated composite cylindrical shell structures	1658-1664
Seo, Dong-Woo / Caracoglia, Luca	Estimating life-cycle monetary losses due to wind hazards: Fragility analysis of long-span bridges	1593-1606
Chen, Xinzhong	Estimation of stochastic crosswind response of wind-excited tall buildings with nonlinear aerodynamic damping	766-778
Moon, Jiho / Lehman, Dawn E. / Roeder, Charles W. / Lee, Hak-Eun	Evaluation of embedded concrete-filled tube (CFT) column-to-foundation connections	22-35
Song, Brian I. / Sezen, Halil	Experimental and analytical progressive collapse assessment of a steel frame building	664-672
Tsavdaridis, Konstantinos Daniel / D'Mello, Cedric / Huo, Bing Yu	Experimental and computational study of the vertical shear behaviour of partially encased perforated steel beams	805-822
Ardalany, Manoochehr / Fragiacomo, Massimo / Carradine, David / Moss, Peter	Experimental behavior of Laminated Veneer Lumber (LVL) joists with holes and different methods of reinforcement	2154-2164
Tan, Kang-Hai / Nguyen, Truong-Thang	Experimental behaviour of restrained reinforced concrete columns subjected to equal biaxial bending at elevated temperatures	823-836
Crambuer, R. / Richard, B. / Ile, N. / Ragueneau, F.	Experimental characterization and modeling of energy dissipation in reinforced concrete beams subjected to cyclic loading	919-934
Ong, K. C. G. / Lin, Zhi Sheng / Chandra, Lado Riannevo / Tam, Chat Tim / Pang, Sze Dai	Experimental investigation of a DfD moment-resisting beam–column connection	1676-1683
Chalioris, Constantin E. / Karayannis, Chris G.	Experimental investigation of RC beams with rectangular spiral reinforcement in torsion	286-297
Li, Bo / Lam, Eddie Siu-shu / Wu, Bo / Wang, Ya-yong	Experimental investigation on reinforced concrete interior beam–column joints rehabilitated by ferrocement jackets	897-909
Sartori, Tiziano / Tomasi, Roberto	Experimental investigation on sheathing-to-framing connections in wood shear walls	2197-2205
Bousselham, Abdelhak / Chaallal, Omar	Experimental investigations on the influence of size on the performance of RC T-beams retrofitted in shear with CFRP fabrics	1070-1079
Oh, Sang-Hoon / Song, Sung-Hoon / Lee, Sang-Ho / Kim, Hyung-Joon	Experimental study of seismic performance of base-isolated frames with U-shaped hysteretic energy-dissipating devices	2014-2027
De-la-Colina, Jaime / Valdés-González, Jesús / González-Pérez, Carlos Alberto	Experiments to study the effect of foundation rotation on the seismic building torsional, response of a reinforced concrete space frame	1154-1163
Jaeger, Thomas	Extended sandwich model for reinforced concrete slabs in flexure	2229-2239
Jaeger, Thomas	Extended sandwich model for reinforced concrete slabs: Shear strength without transverse reinforcement	1142-1153
Silva, V. / Crowley, H. / Pinho, R. / Varum, H.	Extending displacement-based earthquake loss assessment (DBELA) for the computation of fragility curves	343-356
Choi, Eunsoo / Jeon, Jong-Su / Cho, Baik-Soon / Park, Kyoungsoo	External jacket of FRP wire for confining concrete and its advantages	555-566
Yeoh, David / Fragiacomo, Massimo / Carradine, David	Fatigue behaviour of timber–concrete composite connections and floor beams	2240-2248
Huang, W. / Garbatov, Y. / Guedes Soares, C.	Fatigue reliability assessment of a complex welded structure subjected to multiple cracks	868-879
Barros, Joaquim A. O. / Baghi, Hadi / Dias, Salvador J. E. / Ventura-Gouveia, A.	A FEM-based model to predict the behaviour of RC beams shear strengthened according to the NSM technique	1192-1206
Ibañez, Carmen / Romero, M. L. / Hospitaler, Antonio	Fiber beam model for fire response simulation of axially loaded concrete filled tubular columns	182-193
Krour, Baghdad / Bernard, Fabrice / Tounsi, Abdelouahed	Fibers orientation optimization for concrete beam strengthened with a CFRP bonded plate: A coupled analytical–numerical investigation	218-227
Zhao, Zhisong / Uddin, Nasim	Field calibrated simulation model to perform bridge safety analyses against emergency braking of trucks	2253-2262
Du, Y. G. / Chan, A. H. C. / Clark, L. A. / Wang, X. T. / Gurkalo, F. / Bartos, S.	Finite element analysis of cracking and delamination of concrete beam due to steel corrosion	8-21
Rafiei, S. / Hossain, K. M. A. / Lachemi, M. / Behdinan, K. / Anwar, M. S.	Finite element modeling of double skin profiled composite shear wall system under in-plane loadings	46-57
Gunalan, Shanmuganathan / Mahendran, Mahen	Finite element modelling of load bearing cold-formed steel wall systems under fire conditions	1007-1027
Espinós, Ana / Romero, Manuel L. / Hospitaler, Antonio	Fire design method for bar-reinforced circular and elliptical concrete filled tubular columns	384-395
Han, Lin-Hai / Chen, Feng / Liao, Fei-Yu / Tao, Zhong / Uy, Brian	Fire performance of concrete filled stainless steel tubular columns	165-181
Yang, Keun-Hyeok / Mun, Ju-Hyun / Kim, Gwang-Hee	Flexural behavior of post-tensioned normal-strength lightweight concrete one-way slabs	1295-1307
Aykac, Bengi / Kalkan, Ilker / Aykac, Sabahattin / Egriboz, Yusuf Emre	Flexural behavior of RC beams with regular square or circular web openings	2165-2174
Ban, Huiyong / Bradford, Mark A.	Flexural behaviour of composite beams with high strength steel	1130-1141
Bilgin, Huseyin	Fragility-based assessment of public buildings in Turkey	1283-1294
Vedeld, Knut / Sollund, Håvar / Hellesland, Jostein	Free vibrations of free spanning offshore pipelines	68-82
Massone, Leonardo M.	Fundamental principles of the reinforced concrete design code changes in Chile following the Mw 8.8 earthquake in 2010	1335-1345
Tzimas, A. S. / Karavasilis, T. L. / Bazeos, N. / Beskos, D. E.	A hybrid force/displacement seismic design method for steel building frames	1452-1463
Chang, Chia-Ming / Spencer, Billie F.	Hybrid system identification for high-performance structural control	443-456
Adachi, Fuyuki / Fujita, Kohei / Tsuji, Masaaki / Takewaki, Izuru	Importance of interstory velocity on optimal along-height allocation of viscous oil dampers in super high-rise buildings	489-500
Fernandes, Catarina / Varum, Humberto / Costa, Aníbal	Importance of the bond–slip mechanism in the numerical simulation of the cyclic response of RC elements with plain reinforcing bars	396-406
Ju, S. H.	Improvement of bridge structures to increase the safety of moving trains during earthquakes	501-508
Garrido, Hernán / Curadelli, Oscar / Ambrosini, Daniel	Improvement of tuned mass damper by using rotational inertia through tuned viscous mass damper	2149-2153
Vasconcelos, Graça / Poletti, Elisa / Salavessa, Eunice / Jesus, Abílio M. P. / Lourenço, Paulo B. / Pilaon, Preecha	In-plane shear behaviour of traditional timber walls	1028-1048
Pi, Yong-Lin / Bradford, Mark Andrew	In-plane stability of preloaded shallow arches against dynamic snap-through accounting for rotational end restraints	1496-1510
Zhou, Hongyuan / Beppu, Masuhiro / Ma, Guowei / Zhao, Zhiye	In-structure shock of underground structures: A revisit with experimental investigation	1620-1630
Eröz, Murat / DesRoches, Reginald	The influence of design parameters on the response of bridges seismically isolated with the Friction Pendulum System (FPS)	585-599
Foglar, Marek / Göringer, Jakub	Influence of the structural arrangement of bridges on the noise induced by traffic	642-655
Senjanovic, I. / Tomić, M. / Rudan, S.	Investigation of nonlinear restoring stiffness in dynamic analysis of tension leg platforms	117-125
Hassanein, M. F. / Silvestre, N.	Lateral–distortional buckling of hollow tubular flange plate girders with slender unstiffened webs	572-584
Wang, Wenqi / Eamon, Christopher D.	Load path uncertainty in a wood structure and the effect on structural reliability	889-896
Vasanelli, Emilia / Micelli, Francesco / Aiello, Maria Antonietta / Plizzari, Giovanni	Long term behavior of FRC flexural beams under sustained load	1858-1867
Asteris, P. G. / Cotsovos, D. M. / Chrysostomou, C. Z. / Mohebkhah, A. / Al-Chaar, G. K.	Mathematical micromodeling of infilled frames: State of the art	1905-1921
Venuti, Fiammetta / Bruno, Luca	Mitigation of human-induced lateral vibrations on footbridges through walkway shaping	95-104
Zhang, Yan / Hu, Hui / Sarkar, Partha P.	Modeling of microburst outflows using impinging jet and cooling source approaches and their comparison	779-793
Mojsilović, Nebojša / Kostić, Neven / Schwartz, Joseph	Modelling of the behaviour of seismically strengthened masonry walls subjected to cyclic in-plane shear	1117-1129
Alva, Gerson Moacyr Sisniegas / de Cresce El Debs, Ana Lúcia Homce	Moment–rotation relationship of RC beam-column connections: Experimental tests and analytical model	1427-1438
Santos, João Pedro / Crémona, Christian / Orcesi, André D. / Silveira, Paulo	Multivariate statistical analysis for early damage detection	273-285
Ismail, Mohammed / Casas, Joan R. / Rodellar, José	Near-fault isolation of cable-stayed bridges using RNC isolator	327-342
Loureiro, A. / Lopez, M. / Gutierrez, R. / Reinosa, J. M.	A new analytical formulation for the E-stub strength calculation in three dimensional steel joints with additional plates welded to the weak axis	2263-2272
Bao, J. Q. / Long, X. / Tan, K. H. / Lee, C. K.	A new generalized Drucker–Prager flow rule for concrete under compression	2076-2082
Piedrafita, D. / Cahís, X. / Simon, E. / Comas, J.	A new modular buckling restrained brace for seismic resistant buildings	1967-1975
Shen, Hui-Shen / Xiang, Y.	Nonlinear analysis of nanotube-reinforced composite beams resting on elastic foundations in thermal environments	698-708
Zhang, Wei / Cai, C. S. / Pan, Fang	Nonlinear fatigue damage assessment of existing bridges considering progressively deteriorated road conditions	1922-1932
Zapico-Valle, J. L. / García-Diéguez, M. / Alonso-Camblor, R.	Nonlinear modal identification of a steel frame	246-259
Avraam, Tassos P. / Fasoulakis, Zacharias C.	Nonlinear postbuckling analysis of frames with varying cross-section columns	1-7
Cheng, Zhibao / Shi, Zhifei	Novel composite periodic structures with attenuation zones	1271-1282
Dalfré, Gláucia M. / Barros, Joaquim A. O.	NSM technique to increase the load carrying capacity of continuous RC slabs	137-153
Como, Anisa / Mahmoud, Hussam	Numerical evaluation of tsunami debris impact loading on wooden structural walls	1249-1261
Wang, Yin / Lu, Yong / Ooi, Jin Y.	Numerical modelling of dynamic pressure and flow in hopper discharge using the Arbitrary Lagrangian–Eulerian formulation	1308-1320
Civjan, Scott A. / Kalaycı, Emre / Quinn, Brooke H. / Breña, Sergio F. / Allen, Chad A.	Observed integral abutment bridge substructure response	1177-1191
Sousa, Hélder S. / Sørensen, John D. / Kirkegaard, Poul H. / Branco, Jorge M. / Lourenço, Paulo B.	On the use of NDT data for reliability-based assessment of existing timber structures	298-311
Szuwalski, Krzysztof / Ustrzycka, Aneta	Optimal design of full disks with respect to mixed creep rupture time	1728-1734
Ohsaki, M. / Tsuda, S. / Watanabe, H.	Optimization of retractable structures utilizing bistable compliant mechanism	910-918
Belevičius, Rimantas / Jatulis, Donatas / Šešok, Dmitrij	Optimization of tall guyed masts using genetic algorithms	239-245
Shao, Xiaoyun / Griffith, Chelsea	An overview of hybrid simulation implementations in NEES projects	1439-1451
Terán, Gerardo / Albiter, Apolinar / Cuamatzi-Meléndez, Ruben	Parametric evaluation of the stress concentration factors in T-butt welded connections	1484-1495
Kim, Yail J. / Tanovic, Rusmir / Wight, R. Gordon	A parametric study and rating of steel I-girder bridges subjected to military load classification trucks	709-720
Zhang, Xihong / Hao, Hong / Ma, Guowei	Parametric study of laminated glass window response to blast loads	1707-1717
Haach, Vladimir G. / Ramalho, Marcio A. / Corrêa, Márcio R. S.	Parametrical study of unreinforced flanged masonry walls subjected to horizontal loading through numerical modeling	207-217
Visintin, P. / Oehlers, D. J. / Muhamad, R. / Wu, C.	Partial-interaction short term serviceability deflection of RC beams	993-1006
Pisano, A. A. / Fuschi, P. / De Domenico, D.	Peak loads and failure modes of steel-reinforced concrete beams: Predictions by limit analysis	477-488
Longva, V. / Sævik, S.	A penalty-based contact element for pipe and 3D rigid body interaction	1580-1592
Costa-Neves, L. F. / Figueiredo, J. P. / da S. Vellasco, P. C. G. / da Cruz Vianna, J.	Perforated shear connectors on composite girders under monotonic loading: An experimental approach	721-737
Alberdi, Ryan / Przywara, John / Khandelwal, Kapil	Performance evaluation of sandwich panel systems for blast mitigation	2119-2130
Yang, Hua / Liu, Faqi / Gardner, Leroy	Performance of concrete-filled RHS columns exposed to fire on 3 sides	1986-2004
González, Erick / Almazán, José / Beltrán, Juan / Herrera, Ricardo / Sandoval, Victor	Performance of stainless steel winery tanks during the 02/27/2010 Maule Earthquake	1402-1418
Mondal, Apurba / Ghosh, Siddhartha / Reddy, G. R.	Performance-based evaluation of the response reduction factor for ductile RC frames	1808-1819
Gjorgjiev, Igor / Garevski, Mihail	A polynomial analytical model of rubber bearings based on series of tests	600-609
Lu, Lyan-Ywan / Lee, Tzu-Ying / Juang, Shiang-Yu / Yeh, Shih-Wei	Polynomial friction pendulum isolators (PFPIs) for building floor isolation: An experimental and theoretical study	970-982
Trahair, N. S.	Post-buckling strength of steel tee columns	1800-1807
Rupf, Michael / Ruiz, Miguel Fernández / Muttoni, Aurelio	Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges	357-371
Pinoteau, N. / Heck, J. V. / Rivillon, Ph. / Avenel, R. / Pimienta, P. / Guillet, T. / Rémond, S.	Prediction of failure of a cantilever–wall connection using post-installed rebars under thermal loading	1607-1619
Jirawattanasomkul, Tidarut / Dawei, Zhang / Ueda, Tamon	Prediction of the post-peak behavior of reinforced concrete columns with and without FRP-jacketing	1511-1526
Poitevin, Augusto / Natalini, Bruno / Godoy, Luis A.	Pressures on open canopy structures with parapets under wind loading	850-867
Köhler, J. / Brandner, R. / Thiel, A. B. / Schickhofer, G.	Probabilistic characterisation of the length effect for parallel to the grain tensile strength of Central European spruce	691-697
Mousavi, Mir Emad / Gardoni, Paolo / Maadooliat, Mehdi	Progressive reliability method and its application to offshore mooring systems	2131-2138
Taras, Andreas / Unterweger, Harald	Proposal for a stress modification factor for the fatigue design of flange thickness transitions in welded girders	1758-1774
Costa, Bruno J. A. / Magalhães, Filipe / Cunha, Álvaro / Figueiras, Joaquim	Rehabilitation assessment of a centenary steel bridge based on modal analysis	260-272
Oliva, Javier / Goicolea, José M. / Antolín, Pablo / Astiz, Miguel A.	Relevance of a complete road surface description in vehicle–bridge interaction dynamics	466-476
Zhu, Benjin / Frangopol, Dan M.	Reliability assessment of ship structures using Bayesian updating	1836-1847
Haddad, R. H. / Al-Rousan, R. Z. / Al-Sedyiri, B. Kh.	Repair of shear-deficient and sulfate-damaged reinforced concrete beams using FRP composites	228-238
Madurapperuma, M. A. K. M. / Wijeyewickrema, Anil C.	Response of reinforced concrete columns impacted by tsunami dispersed 20′ and 40′ shipping containers	1631-1644
Henderson, David J. / Morrison, Murray J. / Kopp, Gregory A.	Response of toe-nailed, roof-to-wall connections to extreme wind loads in a full-scale, timber-framed, hip roof	1474-1483
Hou, Xiaomeng / Zheng, Wenzhong / Kodur, V. K. R.	Response of unbonded prestressed concrete continuous slabs under fire exposure	2139-2148
Hossain, Md Raquibul / Ashraf, Mahmud / Padgett, Jamie E.	Risk-based seismic performance assessment of Yielding Shear Panel Device	1570-1579
Parisi, Fulvio / Lignola, Gian Piero / Augenti, Nicola / Prota, Andrea / Manfredi, Gaetano	Rocking response assessment of in-plane laterally-loaded masonry walls with openings	1234-1248
Nuñez-Collado, Gala / Garzón-Roca, Julio / Payá-Zaforteza, Ignacio / Adam, José M.	The San Nicolas Church in Gandia (Spain) or how Eduardo Torroja devised a new, innovative and sustainable structural system for long-span roofs	1893-1904
Tao, Mu-Xuan / Fan, Jian-Sheng / Nie, Jian-Guo	Seismic behavior of steel reinforced concrete column–steel truss beam hybrid joints	1557-1569
Zhang, Sherong / Wang, Gaohui / Yu, Xiangrong	Seismic cracking analysis of concrete gravity dams with initial cracks using the extended finite element method	528-543
Kang, Jae-Do / Tagawa, Hiroshi	Seismic performance of steel structures with seesaw energy dissipation system using fluid viscous dampers	431-442
Park, Ji-Hun	Seismic response of SDOF systems representing masonry-infilled RC frames with damping systems	1735-1750
Jara, J. M. / Madrigal, E. / Jara, M. / Olmos, B. A.	Seismic source effects on the vulnerability of an irregular isolated bridge	105-115
Bitaraf, Maryam / Hurlebaus, Stefan	Semi-active adaptive control of seismically excited 20-story nonlinear building	2107-2118
Cattaneo, Sara / Giussani, Francesca	Shear behaviour of R.C. beams with water-stop joints	1775-1786
Shin, Myoungsu / Choi, Yoon Young / Sun, Chang-Ho / Kim, Ick-Hyun	Shear strength model for reinforced concrete rectangular hollow columns	958-969
Su, R. K. L. / Li, L. Z. / Lo, S. H.	Shear transfer in bolted side-plated reinforced concrete beams	1372-1383
Massone, Leonardo M. / Gotschlich, Nicolás J. / Kang, Thomas H.-K. / Hong, Sung-Gul	Shear–flexural interaction for prestressed self-consolidating concrete beams	1464-1473
Dragos, Jonathon / Wu, Chengqing / Oehlers, Deric John	Simplification of fully confined blasts for structural response analysis	312-326
Bacigalupo, A. / Brencich, A. / Gambarotta, L.	A simplified assessment of the dome and drum of the Basilica of S. Maria Assunta in Carignano in Genoa	749-765
Encina, Javier / de la Llera, Juan C.	A simplified model for the analysis of free plan buildings using a wide-column model	738-748
Selva, Pierre / Cherrier, Olivier / Budinger, Valérie / Lachaud, Frédéric / Morlier, Joseph	Smart monitoring of aeronautical composites plates based on electromechanical impedance measurements and artificial neural networks	794-804
Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.	A smeared crack analysis of reinforced concrete T-beams strengthened with GFRP composites	1346-1361
Harte, Reinhard / Höffer, Rüdiger / Krätzig, Wilfried B. / Mark, Peter / Niemann, Hans-Jürgen	Solar updraft power plants: Engineering structures for sustainable energy generation	1698-1706
Akinci, Necip Onder / Liu, Judy / Bowman, Mark D.	Spring analogy to predict the 3-D live load response of slab-on-girder bridges	1049-1057
Theiler, Matthias / Frangi, Andrea / Steiger, René	Strain-based calculation model for centrically and eccentrically loaded timber columns	1103-1116
Domede, Nathalie / Sellier, Alain / Stablon, Thomas	Structural analysis of a multi-span railway masonry bridge combining in situ observations, laboratory tests and damage modelling	837-849
Carpinteri, Alberto / Lacidogna, Giuseppe / Cammarano, Sandro	Structural analysis of high-rise buildings under horizontal loads: A study on the Intesa Sanpaolo Tower in Turin	1362-1371
Galliot, Cedric / Luchsinger, Rolf H.	Structural behavior of symmetric spindle-shaped Tensairity girders with reinforced chord coupling	407-416
Chapeleau, X. / Sedran, T. / Cottineau, L.-M. / Cailliau, J. / Taillade, F. / Gueguen, I. / Henault, J.-M.	Study of ballastless track structure monitoring by distributed optical fiber sensors on a real-scale mockup in laboratory	1751-1757
Clayton, Patricia M. / Berman, Jeffrey W. / Lowes, Laura N.	Subassembly testing and modeling of self-centering steel plate shear walls	1848-1857
Kelly, James M. / Marsico, Maria Rosaria	Tension buckling in rubber bearings affected by cavitation	656-663
Kong, B. / Cai, C. S. / Kong, X.	Thermal behaviors of concrete and steel bridges after slab replacements with GFRP honeycomb sandwich panels	2041-2051
Rong, Jian Hua / Tang, Zhi Li / Xie, Yi Min / Li, Fang Yi	Topological optimization design of structures under random excitations using SQP method	2098-2106
Yang, In-Hwan / Joh, Changbin / Lee, Jung Woo / Kim, Byung-Suk	Torsional behavior of ultra-high performance concrete squared beams	372-383
Rahal, Khaldoun N.	Torsional strength of normal and high strength reinforced concrete beams	2206-2216
Vázquez-Herrero, Cristina / Martínez-Lage, Isabel / Martínez-Abella, Fernando	Transfer length in pretensioned prestressed concrete structures composed of high performance lightweight and normal-weight concrete	983-992
Lagomarsino, Sergio / Penna, Andrea / Galasco, Alessandro / Cattari, Serena	TREMURI program: An equivalent frame model for the nonlinear seismic analysis of masonry buildings	1787-1799
Teh, Lip H. / Yazici, Veysel	Unconventional block shear failures of bolted connections in cold-reduced steel sheets	567-571
Jorquera-Lucerga, Juan José	Understanding Calatrava's bridges: A conceptual approach to the 'La Devesa-type' footbridges	2083-2097
Dieng, Lamine / Helbert, Guillaume / Chirani, Shabnam Arbab / Lecompte, Thibaut / Pilvin, Philippe	Use of Shape Memory Alloys damper device to mitigate vibration amplitudes of bridge cables	1547-1556
Sýkora, Miroslav / Holický, Milan / Marková, Jana	Verification of existing reinforced concrete bridges using the semi-probabilistic approach	1419-1426
Liu, W. Y.	The vibration analysis of wind turbine blade–cabin–tower coupling system	954-957
Kumar, Ajay / Chakrabarti, Anupam / Bhargava, Pradeep	Vibration of laminated composites and sandwich shells based on higher order zigzag theory	880-888
Zhang, Binsheng / Kermani, Abdy / Fillingham, Tony	Vibrational performance of timber floors constructed with metal web joists	1321-1334
Pujol, Santiago / Nelson, Madeline D. / Smith-Pardo, J. Paul	Virtual velocity: Connecting the concepts of Kinematics and Virtual Work	2249-2252

About this
data sheet
IssueID
17364
Published on:
01/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - November 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - November 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.