Engineering Structures - novembre 2013

Publié:	novembre 2013

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Hallak, Patricia H. / Pfeil, Michèle S. / de Oliveira, Sergio R. C. / Battista, Ronaldo C. / de Sampaio, Paulo A. B. / Bezerra, Carolina M. N.	Aerodynamic behavior analysis of Rio-Niterói bridge by means of computational fluid dynamics	935-944
Baby, Florent / Marchand, Pierre / Atrach, Mohammed / Toutlemonde, François	Analysis of flexure-shear behavior of UHPFRC beams based on stress field approach	194-206
Cañas-Guerrero, Ignacio / Mazarrón, Fernando R. / Pou-Merina, Ana / Calleja-Perucho, Cruz / Suárez-Tejero, María Fernanda	Analysis of research activity in the field "Engineering, Civil" through bibliometric methods	2273-2286
Olmos, José M. / Astiz, Miguel A.	Analysis of the lateral dynamic response of high pier viaducts under high-speed train travel	1384-1401
Darehshouri, S. F. / Shanmugam, N. E. / Osman, S. A.	An analytical method for ultimate shear strength of composite plate girders with web openings	610-620
Nguyen, Quang Tung / Thomas, Jean-Christophe / Le van, Anh	An analytical solution for an inflated orthotropic membrane tube with an arbitrarily oriented orthotropy basis	1080-1091
Benyamina, Abdelrahmane Bekaddour / Meftah, Sid Ahmed / Mohri, Foudil / Daya, El Mostafa	Analytical solutions attempt for lateral torsional buckling of doubly symmetric web-tapered I-beams	1207-1219
Kodur, Venkatesh / Khaliq, Wasim / Raut, Nikhil	An approach to account for tie configuration in predicting fire resistance of reinforced concrete columns	1976-1985
Teixeira, A. P. / Ivanov, L. D. / Guedes Soares, C.	Assessment of characteristic values of the ultimate strength of corroded steel plates with initial imperfections	517-527
Tangaramvong, S. / Tin-Loi, F.	Automatic identification of the worst load combination for structural safety assessment using an optimization approach	2287-2298
Ding, Y. / Law, S. S. / Wu, B. / Xu, G. S. / Lin, Q. / Jiang, H. B. / Miao, Q. S.	Average acceleration discrete algorithm for force identification in state space	1880-1892
Jørgensen, Caroline / Grastveit, Ragnhild / Garzón-Roca, Julio / Payá-Zaforteza, Ignacio / Adam, José M.	Bearing capacity of steel-caged RC columns under combined bending and axial loads: Estimation based on Artificial Neural Networks	1262-1270
Rajani, Balvant / Abdel-Akher, Ahmed	Behavior and response of lead-caulked bell–spigot joints in cast iron water mains	2005-2013
Hassanein, M. F. / Kharoob, O. F. / Liang, Q. Q.	Behaviour of circular concrete-filled lean duplex stainless steel–carbon steel tubular short columns	83-94
Bihina, G. / Zhao, B. / Bouchaïr, A.	Behaviour of composite steel–concrete cellular beams in fire	2217-2228
Higgins, Lee / Forth, John P. / Neville, Anne / Jones, Rod / Hodgson, Trevor	Behaviour of cracked reinforced concrete beams under repeated and sustained load types	457-465
Begum, Mahbuba / Driver, Robert G. / Elwi, Alaa E.	Behaviour of partially encased composite columns with high strength concrete	1718-1727
Segura-Castillo, Luis / Aguado, Antonio / Josa, Alejandro	Bi-layer diaphragm walls: Experimental and numerical structural analysis	154-164
Zhang, S. S. / Teng, J. G. / Yu, T.	Bond–slip model for CFRP strips near-surface mounted to concrete	945-953
Beatini, Valentina / Royer-Carfagni, Gianni	Cable-stiffened foldable elastica for movable structures	126-136
Annan, Charles-Darwin / Chiza, Albert	Characterization of slip resistance of high strength bolted connections with zinc-based metallized faying surfaces	2187-2196
Milani, Gabriele / Esquivel, Yhosimi W. / Lourenço, Paulo B. / Riveiro, Belén / Oliveira, Daniel V.	Characterization of the response of quasi-periodic masonry: Geometrical investigation, homogenization and application to the Guimarães castle, Portugal	621-641
Almeida, Valério S. / Simonetti, Hélio Luiz / Neto, Luttgardes Oliveira	Comparative analysis of strut-and-tie models using Smooth Evolutionary Structural Optimization	1665-1675
Vázquez-Herrero, Cristina / Martínez-Lage, Isabel / Vázquez-Vázquez, Humberto / Martínez-Abella, Fernando	Comparative study of the flexural behavior of lightweight and normal weight prestressed concrete beams	1868-1879
Saravia, C. Martín / Machado, Sebastián P. / Cortinez, Victor H.	A composite beam finite element for multibody dynamics: Application to large wind turbine modeling	1164-1176
Soleymani Ashtiani, M. / Dhakal, R. P. / Scott, A. N. / Bull, D. K.	Cyclic beam bending test for assessment of bond–slip behaviour	1684-1697
Kang, Su-Min / Kim, Ook-Jong / Park, Hong-Gun	Cyclic loading test for emulative precast concrete walls with partially reduced rebar section	1645-1657
Pan, Peng / Lam, Alexandre / Lin, Xuchuan / Li, Yixin / Ye, Lieping	Cyclic loading tests and finite element analyses on performance of ring beam connections	682-690
Dincal, S. / Stubbs, N.	Damage evaluation of Timoshenko beams using invariant stress resultants	2052-2064
Gribniak, Viktor / Cervenka, Vladimir / Kaklauskas, Gintaris	Deflection prediction of reinforced concrete beams by design codes and computer simulation	2175-2186
Sahoo, Dipti Ranjan / Rai, Durgesh C.	Design and evaluation of seismic strengthening techniques for reinforced concrete frames with soft ground story	1933-1944
Tso, M. H. / Yuan, J. / Wong, W. O.	Design and experimental study of a hybrid vibration absorber for global vibration control	1058-1069
Robinson, Gary P. / Palmeri, Alessandro / Austin, Simon A.	Design methodologies for one way spanning eccentrically loaded minimally or centrally reinforced pre-cast RC panels	1945-1956
Choi, H.-K. / Choi, Y.-C. / Choi, C.-S.	Development and testing of precast concrete beam-to-column connections	1820-1835
Wu, Tung-Yueh	Dynamic nonlinear analysis of shell structures using a vector form intrinsic finite element	2028-2040
Staino, A. / Basu, B.	Dynamics and control of vibrations in wind turbines with variable rotor speed	58-67
Lancioni, Giovanni / Lenci, Stefano / Piattoni, Quintilio / Quagliarini, Enrico	Dynamics and failure mechanisms of ancient masonry churches subjected to seismic actions by using the NSCD method: The case of the medieval church of S. Maria in Portuno	1527-1546
Zhu, Wenjun / François, Raoul / Coronelli, Dario / Cleland, David	Effect of corrosion of reinforcement on the mechanical behaviour of highly corroded RC beams	544-554
Maniatakis, Charilaos A. / Psycharis, Ioannis N. / Spyrakos, Constantine C.	Effect of higher modes on the seismic response and design of moment-resisting RC frame structures	417-430
Hmidan, Amer / Kim, Yail J. / Yazdani, Siamak	Effect of sustained load combined with cold temperature on flexure of damaged steel beams repaired with CFRP sheets	1957-1966
López-Aenlle, M. / Pelayo, F. / Fernández-Canteli, A. / García Prieto, M. A.	The effective-thickness concept in laminated-glass elements under static loading	1092-1102
Deifalla, A. / Awad, A. / Elgarhy, M.	Effectiveness of externally bonded CFRP strips for strengthening flanged beams under torsion: An experimental study	2065-2075
Kostinakis, K. G. / Athanatopoulou, A. M. / Tsiggelis, V. S.	Effectiveness of percentage combination rules for maximum response calculation within the context of linear time history analysis	36-45
Artioli, E. / Battaglia, R. / Tralli, A.	Effects of May 2012 Emilia earthquake on industrial buildings of early '900 on the Po river line	1220-1233
Di Sarno, L.	Effects of multiple earthquakes on inelastic structural response	673-681
Nelson, Mark / Eldridge, Amanda / Fam, Amir	The effects of splices and bond on performance of bridge deck with FRP stay-in-place forms at various boundary conditions	509-516
To, Cho W. S. / Ingale, Nitin B. / Fu, Jiming	Equivalent bulging factors of internally pressurized cracked laminated composite cylindrical shell structures	1658-1664
Seo, Dong-Woo / Caracoglia, Luca	Estimating life-cycle monetary losses due to wind hazards: Fragility analysis of long-span bridges	1593-1606
Chen, Xinzhong	Estimation of stochastic crosswind response of wind-excited tall buildings with nonlinear aerodynamic damping	766-778
Moon, Jiho / Lehman, Dawn E. / Roeder, Charles W. / Lee, Hak-Eun	Evaluation of embedded concrete-filled tube (CFT) column-to-foundation connections	22-35
Song, Brian I. / Sezen, Halil	Experimental and analytical progressive collapse assessment of a steel frame building	664-672
Tsavdaridis, Konstantinos Daniel / D'Mello, Cedric / Huo, Bing Yu	Experimental and computational study of the vertical shear behaviour of partially encased perforated steel beams	805-822
Ardalany, Manoochehr / Fragiacomo, Massimo / Carradine, David / Moss, Peter	Experimental behavior of Laminated Veneer Lumber (LVL) joists with holes and different methods of reinforcement	2154-2164
Tan, Kang-Hai / Nguyen, Truong-Thang	Experimental behaviour of restrained reinforced concrete columns subjected to equal biaxial bending at elevated temperatures	823-836
Crambuer, R. / Richard, B. / Ile, N. / Ragueneau, F.	Experimental characterization and modeling of energy dissipation in reinforced concrete beams subjected to cyclic loading	919-934
Ong, K. C. G. / Lin, Zhi Sheng / Chandra, Lado Riannevo / Tam, Chat Tim / Pang, Sze Dai	Experimental investigation of a DfD moment-resisting beam–column connection	1676-1683
Chalioris, Constantin E. / Karayannis, Chris G.	Experimental investigation of RC beams with rectangular spiral reinforcement in torsion	286-297
Li, Bo / Lam, Eddie Siu-shu / Wu, Bo / Wang, Ya-yong	Experimental investigation on reinforced concrete interior beam–column joints rehabilitated by ferrocement jackets	897-909
Sartori, Tiziano / Tomasi, Roberto	Experimental investigation on sheathing-to-framing connections in wood shear walls	2197-2205
Bousselham, Abdelhak / Chaallal, Omar	Experimental investigations on the influence of size on the performance of RC T-beams retrofitted in shear with CFRP fabrics	1070-1079
Oh, Sang-Hoon / Song, Sung-Hoon / Lee, Sang-Ho / Kim, Hyung-Joon	Experimental study of seismic performance of base-isolated frames with U-shaped hysteretic energy-dissipating devices	2014-2027
De-la-Colina, Jaime / Valdés-González, Jesús / González-Pérez, Carlos Alberto	Experiments to study the effect of foundation rotation on the seismic building torsional, response of a reinforced concrete space frame	1154-1163
Jaeger, Thomas	Extended sandwich model for reinforced concrete slabs in flexure	2229-2239
Jaeger, Thomas	Extended sandwich model for reinforced concrete slabs: Shear strength without transverse reinforcement	1142-1153
Silva, V. / Crowley, H. / Pinho, R. / Varum, H.	Extending displacement-based earthquake loss assessment (DBELA) for the computation of fragility curves	343-356
Choi, Eunsoo / Jeon, Jong-Su / Cho, Baik-Soon / Park, Kyoungsoo	External jacket of FRP wire for confining concrete and its advantages	555-566
Yeoh, David / Fragiacomo, Massimo / Carradine, David	Fatigue behaviour of timber–concrete composite connections and floor beams	2240-2248
Huang, W. / Garbatov, Y. / Guedes Soares, C.	Fatigue reliability assessment of a complex welded structure subjected to multiple cracks	868-879
Barros, Joaquim A. O. / Baghi, Hadi / Dias, Salvador J. E. / Ventura-Gouveia, A.	A FEM-based model to predict the behaviour of RC beams shear strengthened according to the NSM technique	1192-1206
Ibañez, Carmen / Romero, M. L. / Hospitaler, Antonio	Fiber beam model for fire response simulation of axially loaded concrete filled tubular columns	182-193
Krour, Baghdad / Bernard, Fabrice / Tounsi, Abdelouahed	Fibers orientation optimization for concrete beam strengthened with a CFRP bonded plate: A coupled analytical–numerical investigation	218-227
Zhao, Zhisong / Uddin, Nasim	Field calibrated simulation model to perform bridge safety analyses against emergency braking of trucks	2253-2262
Du, Y. G. / Chan, A. H. C. / Clark, L. A. / Wang, X. T. / Gurkalo, F. / Bartos, S.	Finite element analysis of cracking and delamination of concrete beam due to steel corrosion	8-21
Rafiei, S. / Hossain, K. M. A. / Lachemi, M. / Behdinan, K. / Anwar, M. S.	Finite element modeling of double skin profiled composite shear wall system under in-plane loadings	46-57
Gunalan, Shanmuganathan / Mahendran, Mahen	Finite element modelling of load bearing cold-formed steel wall systems under fire conditions	1007-1027
Espinós, Ana / Romero, Manuel L. / Hospitaler, Antonio	Fire design method for bar-reinforced circular and elliptical concrete filled tubular columns	384-395
Han, Lin-Hai / Chen, Feng / Liao, Fei-Yu / Tao, Zhong / Uy, Brian	Fire performance of concrete filled stainless steel tubular columns	165-181
Yang, Keun-Hyeok / Mun, Ju-Hyun / Kim, Gwang-Hee	Flexural behavior of post-tensioned normal-strength lightweight concrete one-way slabs	1295-1307
Aykac, Bengi / Kalkan, Ilker / Aykac, Sabahattin / Egriboz, Yusuf Emre	Flexural behavior of RC beams with regular square or circular web openings	2165-2174
Ban, Huiyong / Bradford, Mark A.	Flexural behaviour of composite beams with high strength steel	1130-1141
Bilgin, Huseyin	Fragility-based assessment of public buildings in Turkey	1283-1294
Vedeld, Knut / Sollund, Håvar / Hellesland, Jostein	Free vibrations of free spanning offshore pipelines	68-82
Massone, Leonardo M.	Fundamental principles of the reinforced concrete design code changes in Chile following the Mw 8.8 earthquake in 2010	1335-1345
Tzimas, A. S. / Karavasilis, T. L. / Bazeos, N. / Beskos, D. E.	A hybrid force/displacement seismic design method for steel building frames	1452-1463
Chang, Chia-Ming / Spencer, Billie F.	Hybrid system identification for high-performance structural control	443-456
Adachi, Fuyuki / Fujita, Kohei / Tsuji, Masaaki / Takewaki, Izuru	Importance of interstory velocity on optimal along-height allocation of viscous oil dampers in super high-rise buildings	489-500
Fernandes, Catarina / Varum, Humberto / Costa, Aníbal	Importance of the bond–slip mechanism in the numerical simulation of the cyclic response of RC elements with plain reinforcing bars	396-406
Ju, S. H.	Improvement of bridge structures to increase the safety of moving trains during earthquakes	501-508
Garrido, Hernán / Curadelli, Oscar / Ambrosini, Daniel	Improvement of tuned mass damper by using rotational inertia through tuned viscous mass damper	2149-2153
Vasconcelos, Graça / Poletti, Elisa / Salavessa, Eunice / Jesus, Abílio M. P. / Lourenço, Paulo B. / Pilaon, Preecha	In-plane shear behaviour of traditional timber walls	1028-1048
Pi, Yong-Lin / Bradford, Mark Andrew	In-plane stability of preloaded shallow arches against dynamic snap-through accounting for rotational end restraints	1496-1510
Zhou, Hongyuan / Beppu, Masuhiro / Ma, Guowei / Zhao, Zhiye	In-structure shock of underground structures: A revisit with experimental investigation	1620-1630
Eröz, Murat / DesRoches, Reginald	The influence of design parameters on the response of bridges seismically isolated with the Friction Pendulum System (FPS)	585-599
Foglar, Marek / Göringer, Jakub	Influence of the structural arrangement of bridges on the noise induced by traffic	642-655
Senjanovic, I. / Tomić, M. / Rudan, S.	Investigation of nonlinear restoring stiffness in dynamic analysis of tension leg platforms	117-125
Hassanein, M. F. / Silvestre, N.	Lateral–distortional buckling of hollow tubular flange plate girders with slender unstiffened webs	572-584
Wang, Wenqi / Eamon, Christopher D.	Load path uncertainty in a wood structure and the effect on structural reliability	889-896
Vasanelli, Emilia / Micelli, Francesco / Aiello, Maria Antonietta / Plizzari, Giovanni	Long term behavior of FRC flexural beams under sustained load	1858-1867
Asteris, P. G. / Cotsovos, D. M. / Chrysostomou, C. Z. / Mohebkhah, A. / Al-Chaar, G. K.	Mathematical micromodeling of infilled frames: State of the art	1905-1921
Venuti, Fiammetta / Bruno, Luca	Mitigation of human-induced lateral vibrations on footbridges through walkway shaping	95-104
Zhang, Yan / Hu, Hui / Sarkar, Partha P.	Modeling of microburst outflows using impinging jet and cooling source approaches and their comparison	779-793
Mojsilović, Nebojša / Kostić, Neven / Schwartz, Joseph	Modelling of the behaviour of seismically strengthened masonry walls subjected to cyclic in-plane shear	1117-1129
Alva, Gerson Moacyr Sisniegas / de Cresce El Debs, Ana Lúcia Homce	Moment–rotation relationship of RC beam-column connections: Experimental tests and analytical model	1427-1438
Santos, João Pedro / Crémona, Christian / Orcesi, André D. / Silveira, Paulo	Multivariate statistical analysis for early damage detection	273-285
Ismail, Mohammed / Casas, Joan R. / Rodellar, José	Near-fault isolation of cable-stayed bridges using RNC isolator	327-342
Loureiro, A. / Lopez, M. / Gutierrez, R. / Reinosa, J. M.	A new analytical formulation for the E-stub strength calculation in three dimensional steel joints with additional plates welded to the weak axis	2263-2272
Bao, J. Q. / Long, X. / Tan, K. H. / Lee, C. K.	A new generalized Drucker–Prager flow rule for concrete under compression	2076-2082
Piedrafita, D. / Cahís, X. / Simon, E. / Comas, J.	A new modular buckling restrained brace for seismic resistant buildings	1967-1975
Shen, Hui-Shen / Xiang, Y.	Nonlinear analysis of nanotube-reinforced composite beams resting on elastic foundations in thermal environments	698-708
Zhang, Wei / Cai, C. S. / Pan, Fang	Nonlinear fatigue damage assessment of existing bridges considering progressively deteriorated road conditions	1922-1932
Zapico-Valle, J. L. / García-Diéguez, M. / Alonso-Camblor, R.	Nonlinear modal identification of a steel frame	246-259
Avraam, Tassos P. / Fasoulakis, Zacharias C.	Nonlinear postbuckling analysis of frames with varying cross-section columns	1-7
Cheng, Zhibao / Shi, Zhifei	Novel composite periodic structures with attenuation zones	1271-1282
Dalfré, Gláucia M. / Barros, Joaquim A. O.	NSM technique to increase the load carrying capacity of continuous RC slabs	137-153
Como, Anisa / Mahmoud, Hussam	Numerical evaluation of tsunami debris impact loading on wooden structural walls	1249-1261
Wang, Yin / Lu, Yong / Ooi, Jin Y.	Numerical modelling of dynamic pressure and flow in hopper discharge using the Arbitrary Lagrangian–Eulerian formulation	1308-1320
Civjan, Scott A. / Kalaycı, Emre / Quinn, Brooke H. / Breña, Sergio F. / Allen, Chad A.	Observed integral abutment bridge substructure response	1177-1191
Sousa, Hélder S. / Sørensen, John D. / Kirkegaard, Poul H. / Branco, Jorge M. / Lourenço, Paulo B.	On the use of NDT data for reliability-based assessment of existing timber structures	298-311
Szuwalski, Krzysztof / Ustrzycka, Aneta	Optimal design of full disks with respect to mixed creep rupture time	1728-1734
Ohsaki, M. / Tsuda, S. / Watanabe, H.	Optimization of retractable structures utilizing bistable compliant mechanism	910-918
Belevičius, Rimantas / Jatulis, Donatas / Šešok, Dmitrij	Optimization of tall guyed masts using genetic algorithms	239-245
Shao, Xiaoyun / Griffith, Chelsea	An overview of hybrid simulation implementations in NEES projects	1439-1451
Terán, Gerardo / Albiter, Apolinar / Cuamatzi-Meléndez, Ruben	Parametric evaluation of the stress concentration factors in T-butt welded connections	1484-1495
Kim, Yail J. / Tanovic, Rusmir / Wight, R. Gordon	A parametric study and rating of steel I-girder bridges subjected to military load classification trucks	709-720
Zhang, Xihong / Hao, Hong / Ma, Guowei	Parametric study of laminated glass window response to blast loads	1707-1717
Haach, Vladimir G. / Ramalho, Marcio A. / Corrêa, Márcio R. S.	Parametrical study of unreinforced flanged masonry walls subjected to horizontal loading through numerical modeling	207-217
Visintin, P. / Oehlers, D. J. / Muhamad, R. / Wu, C.	Partial-interaction short term serviceability deflection of RC beams	993-1006
Pisano, A. A. / Fuschi, P. / De Domenico, D.	Peak loads and failure modes of steel-reinforced concrete beams: Predictions by limit analysis	477-488
Longva, V. / Sævik, S.	A penalty-based contact element for pipe and 3D rigid body interaction	1580-1592
Costa-Neves, L. F. / Figueiredo, J. P. / da S. Vellasco, P. C. G. / da Cruz Vianna, J.	Perforated shear connectors on composite girders under monotonic loading: An experimental approach	721-737
Alberdi, Ryan / Przywara, John / Khandelwal, Kapil	Performance evaluation of sandwich panel systems for blast mitigation	2119-2130
Yang, Hua / Liu, Faqi / Gardner, Leroy	Performance of concrete-filled RHS columns exposed to fire on 3 sides	1986-2004
González, Erick / Almazán, José / Beltrán, Juan / Herrera, Ricardo / Sandoval, Victor	Performance of stainless steel winery tanks during the 02/27/2010 Maule Earthquake	1402-1418
Mondal, Apurba / Ghosh, Siddhartha / Reddy, G. R.	Performance-based evaluation of the response reduction factor for ductile RC frames	1808-1819
Gjorgjiev, Igor / Garevski, Mihail	A polynomial analytical model of rubber bearings based on series of tests	600-609
Lu, Lyan-Ywan / Lee, Tzu-Ying / Juang, Shiang-Yu / Yeh, Shih-Wei	Polynomial friction pendulum isolators (PFPIs) for building floor isolation: An experimental and theoretical study	970-982
Trahair, N. S.	Post-buckling strength of steel tee columns	1800-1807
Rupf, Michael / Ruiz, Miguel Fernández / Muttoni, Aurelio	Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges	357-371
Pinoteau, N. / Heck, J. V. / Rivillon, Ph. / Avenel, R. / Pimienta, P. / Guillet, T. / Rémond, S.	Prediction of failure of a cantilever–wall connection using post-installed rebars under thermal loading	1607-1619
Jirawattanasomkul, Tidarut / Dawei, Zhang / Ueda, Tamon	Prediction of the post-peak behavior of reinforced concrete columns with and without FRP-jacketing	1511-1526
Poitevin, Augusto / Natalini, Bruno / Godoy, Luis A.	Pressures on open canopy structures with parapets under wind loading	850-867
Köhler, J. / Brandner, R. / Thiel, A. B. / Schickhofer, G.	Probabilistic characterisation of the length effect for parallel to the grain tensile strength of Central European spruce	691-697
Mousavi, Mir Emad / Gardoni, Paolo / Maadooliat, Mehdi	Progressive reliability method and its application to offshore mooring systems	2131-2138
Taras, Andreas / Unterweger, Harald	Proposal for a stress modification factor for the fatigue design of flange thickness transitions in welded girders	1758-1774
Costa, Bruno J. A. / Magalhães, Filipe / Cunha, Álvaro / Figueiras, Joaquim	Rehabilitation assessment of a centenary steel bridge based on modal analysis	260-272
Oliva, Javier / Goicolea, José M. / Antolín, Pablo / Astiz, Miguel A.	Relevance of a complete road surface description in vehicle–bridge interaction dynamics	466-476
Zhu, Benjin / Frangopol, Dan M.	Reliability assessment of ship structures using Bayesian updating	1836-1847
Haddad, R. H. / Al-Rousan, R. Z. / Al-Sedyiri, B. Kh.	Repair of shear-deficient and sulfate-damaged reinforced concrete beams using FRP composites	228-238
Madurapperuma, M. A. K. M. / Wijeyewickrema, Anil C.	Response of reinforced concrete columns impacted by tsunami dispersed 20′ and 40′ shipping containers	1631-1644
Henderson, David J. / Morrison, Murray J. / Kopp, Gregory A.	Response of toe-nailed, roof-to-wall connections to extreme wind loads in a full-scale, timber-framed, hip roof	1474-1483
Hou, Xiaomeng / Zheng, Wenzhong / Kodur, V. K. R.	Response of unbonded prestressed concrete continuous slabs under fire exposure	2139-2148
Hossain, Md Raquibul / Ashraf, Mahmud / Padgett, Jamie E.	Risk-based seismic performance assessment of Yielding Shear Panel Device	1570-1579
Parisi, Fulvio / Lignola, Gian Piero / Augenti, Nicola / Prota, Andrea / Manfredi, Gaetano	Rocking response assessment of in-plane laterally-loaded masonry walls with openings	1234-1248
Nuñez-Collado, Gala / Garzón-Roca, Julio / Payá-Zaforteza, Ignacio / Adam, José M.	The San Nicolas Church in Gandia (Spain) or how Eduardo Torroja devised a new, innovative and sustainable structural system for long-span roofs	1893-1904
Tao, Mu-Xuan / Fan, Jian-Sheng / Nie, Jian-Guo	Seismic behavior of steel reinforced concrete column–steel truss beam hybrid joints	1557-1569
Zhang, Sherong / Wang, Gaohui / Yu, Xiangrong	Seismic cracking analysis of concrete gravity dams with initial cracks using the extended finite element method	528-543
Kang, Jae-Do / Tagawa, Hiroshi	Seismic performance of steel structures with seesaw energy dissipation system using fluid viscous dampers	431-442
Park, Ji-Hun	Seismic response of SDOF systems representing masonry-infilled RC frames with damping systems	1735-1750
Jara, J. M. / Madrigal, E. / Jara, M. / Olmos, B. A.	Seismic source effects on the vulnerability of an irregular isolated bridge	105-115
Bitaraf, Maryam / Hurlebaus, Stefan	Semi-active adaptive control of seismically excited 20-story nonlinear building	2107-2118
Cattaneo, Sara / Giussani, Francesca	Shear behaviour of R.C. beams with water-stop joints	1775-1786
Shin, Myoungsu / Choi, Yoon Young / Sun, Chang-Ho / Kim, Ick-Hyun	Shear strength model for reinforced concrete rectangular hollow columns	958-969
Su, R. K. L. / Li, L. Z. / Lo, S. H.	Shear transfer in bolted side-plated reinforced concrete beams	1372-1383
Massone, Leonardo M. / Gotschlich, Nicolás J. / Kang, Thomas H.-K. / Hong, Sung-Gul	Shear–flexural interaction for prestressed self-consolidating concrete beams	1464-1473
Dragos, Jonathon / Wu, Chengqing / Oehlers, Deric John	Simplification of fully confined blasts for structural response analysis	312-326
Bacigalupo, A. / Brencich, A. / Gambarotta, L.	A simplified assessment of the dome and drum of the Basilica of S. Maria Assunta in Carignano in Genoa	749-765
Encina, Javier / de la Llera, Juan C.	A simplified model for the analysis of free plan buildings using a wide-column model	738-748
Selva, Pierre / Cherrier, Olivier / Budinger, Valérie / Lachaud, Frédéric / Morlier, Joseph	Smart monitoring of aeronautical composites plates based on electromechanical impedance measurements and artificial neural networks	794-804
Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.	A smeared crack analysis of reinforced concrete T-beams strengthened with GFRP composites	1346-1361
Harte, Reinhard / Höffer, Rüdiger / Krätzig, Wilfried B. / Mark, Peter / Niemann, Hans-Jürgen	Solar updraft power plants: Engineering structures for sustainable energy generation	1698-1706
Akinci, Necip Onder / Liu, Judy / Bowman, Mark D.	Spring analogy to predict the 3-D live load response of slab-on-girder bridges	1049-1057
Theiler, Matthias / Frangi, Andrea / Steiger, René	Strain-based calculation model for centrically and eccentrically loaded timber columns	1103-1116
Domede, Nathalie / Sellier, Alain / Stablon, Thomas	Structural analysis of a multi-span railway masonry bridge combining in situ observations, laboratory tests and damage modelling	837-849
Carpinteri, Alberto / Lacidogna, Giuseppe / Cammarano, Sandro	Structural analysis of high-rise buildings under horizontal loads: A study on the Intesa Sanpaolo Tower in Turin	1362-1371
Galliot, Cedric / Luchsinger, Rolf H.	Structural behavior of symmetric spindle-shaped Tensairity girders with reinforced chord coupling	407-416
Chapeleau, X. / Sedran, T. / Cottineau, L.-M. / Cailliau, J. / Taillade, F. / Gueguen, I. / Henault, J.-M.	Study of ballastless track structure monitoring by distributed optical fiber sensors on a real-scale mockup in laboratory	1751-1757
Clayton, Patricia M. / Berman, Jeffrey W. / Lowes, Laura N.	Subassembly testing and modeling of self-centering steel plate shear walls	1848-1857
Kelly, James M. / Marsico, Maria Rosaria	Tension buckling in rubber bearings affected by cavitation	656-663
Kong, B. / Cai, C. S. / Kong, X.	Thermal behaviors of concrete and steel bridges after slab replacements with GFRP honeycomb sandwich panels	2041-2051
Rong, Jian Hua / Tang, Zhi Li / Xie, Yi Min / Li, Fang Yi	Topological optimization design of structures under random excitations using SQP method	2098-2106
Yang, In-Hwan / Joh, Changbin / Lee, Jung Woo / Kim, Byung-Suk	Torsional behavior of ultra-high performance concrete squared beams	372-383
Rahal, Khaldoun N.	Torsional strength of normal and high strength reinforced concrete beams	2206-2216
Vázquez-Herrero, Cristina / Martínez-Lage, Isabel / Martínez-Abella, Fernando	Transfer length in pretensioned prestressed concrete structures composed of high performance lightweight and normal-weight concrete	983-992
Lagomarsino, Sergio / Penna, Andrea / Galasco, Alessandro / Cattari, Serena	TREMURI program: An equivalent frame model for the nonlinear seismic analysis of masonry buildings	1787-1799
Teh, Lip H. / Yazici, Veysel	Unconventional block shear failures of bolted connections in cold-reduced steel sheets	567-571
Jorquera-Lucerga, Juan José	Understanding Calatrava's bridges: A conceptual approach to the 'La Devesa-type' footbridges	2083-2097
Dieng, Lamine / Helbert, Guillaume / Chirani, Shabnam Arbab / Lecompte, Thibaut / Pilvin, Philippe	Use of Shape Memory Alloys damper device to mitigate vibration amplitudes of bridge cables	1547-1556
Sýkora, Miroslav / Holický, Milan / Marková, Jana	Verification of existing reinforced concrete bridges using the semi-probabilistic approach	1419-1426
Liu, W. Y.	The vibration analysis of wind turbine blade–cabin–tower coupling system	954-957
Kumar, Ajay / Chakrabarti, Anupam / Bhargava, Pradeep	Vibration of laminated composites and sandwich shells based on higher order zigzag theory	880-888
Zhang, Binsheng / Kermani, Abdy / Fillingham, Tony	Vibrational performance of timber floors constructed with metal web joists	1321-1334
Pujol, Santiago / Nelson, Madeline D. / Smith-Pardo, J. Paul	Virtual velocity: Connecting the concepts of Kinematics and Virtual Work	2249-2252

Informations
sur cette fiche
IssueID
17364
Publié(e) le:
01.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - novembre 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - novembre 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.