Energy and Buildings - January 2016

Published:	January 2016

Articles in this Issue

Author(s)	Title	Page(s)
Berger, Julien / Mazuroski, Walter / Mendes, Nathan / Guernouti, Sihem / Woloszyn, Monika	2D whole-building hygrothermal simulation analysis based on a PGD reduced order model	49-61
Ihara, Takeshi / Jelle, Bjørn Petter / Gao, Tao / Gustavsen, Arild	Accelerated aging of treated aluminum for use as a cool colored material for facades	184-197
Candanedo, Luis M. / Feldheim, Véronique	Accurate occupancy detection of an office room from light, temperature, humidity and CO 2 measurements using statistical learning models	28-39
Hoffmann, Sabine / Lee, Eleanor S. / McNeil, Andrew / Fernandes, Luis / Vidanovic, Dragan / Thanachareonkit, Anothai	Balancing daylight, glare, and energy-efficiency goals: An evaluation of exterior coplanar shading systems using complex fenestration modeling tools	279-298
Nijhuis, M. / Gibescu, M. / Cobben, J. F. G.	Bottom-up Markov Chain Monte Carlo approach for scenario based residential load modelling with publicly available data	121-129
Năstase, Gabriel / Şerban, Alexandru / Dragomir, George / Bolocan, Sorin / Brezeanu, Alin Ionuţ	Box window double skin façade. Steady state heat transfer model proposal for energetic audits	12-20
Killian, M. / Mayer, B. / Kozek, M.	Cooperative fuzzy model predictive control for heating and cooling of buildings	130-140
Hitchin, Roger / Knight, Ian	Daily energy consumption signatures and control charts for air-conditioned buildings	101-109
Melo, A. P. / Fossati, M. / Versage, R. S. / Sorgato, M. J. / Scalco, V. A. / Lamberts, R.	Development and analysis of a metamodel to represent the thermal behavior of naturally ventilated and artificially air-conditioned residential buildings	209-221
Jeong, Su-Gwang / Chang, Seong Jin / Wi, Seunghwan / Kang, Yujin / Kim, Sumin	Development and performance evaluation of heat storage paint with MPCM for applying roof materials as basic research	62-68
Saffari, Mohammad / de Gracia, Alvaro / Ushak, Svetlana / Cabeza, Luisa F.	Economic impact of integrating PCM as passive system in buildings using Fanger comfort model	159-172
Grolinger, Katarina / L'Heureux, Alexandra / Capretz, Miriam A. M. / Seewald, Luke	Energy Forecasting for Event Venues: Big Data and Prediction Accuracy	222-233
Taniguchi, Ayako / Inoue, Takuya / Otsuki, Masaya / Yamaguchi, Yohei / Shimoda, Yoshiyuki / Takami, Akinobu / Hanaoka, Kanako	Estimation of the contribution of the residential sector to summer peak demand reduction in Japan using an energy end-use simulation model	80-92
Colinart, T. / Lelievre, D. / Glouannec, P.	Experimental and numerical analysis of the transient hygrothermal behavior of multilayered hemp concrete wall	1-11
Wu, Xiaozhou / Olesen, Bjarne W. / Fang, Lei / Zhao, Jianing / Wang, Fenghao	Indoor temperatures for calculating room heat loss and heating capacity of radiant heating systems combined with mechanical ventilation systems	141-148
Pisello, A. L. / Fortunati, E. / Mattioli, S. / Cabeza, L. F. / Barreneche, C. / Kenny, J. M. / Cotana, F.	Innovative cool roofing membrane with integrated phase change materials: Experimental characterization of morphological, thermal and optic-energy behavior	40-48
Biswas, Kaushik / Shrestha, Som S. / Bhandari, Mahabir S. / Desjarlais, Andre O.	Insulation materials for commercial buildings in North America: An assessment of lifetime energy and environmental impacts	256-269
Vasilyev, G. P. / Tabunshchikov, Iu A. / Brodach, M. M. / Leskov, V. A. / Mitrofanova, N. V. / Timofeev, N. A. / Gornov, V. F. / Esaulov, G. V.	Modeling moisture condensation in humid air flow in the course of cooling and heat recovery	93-100
Saloux, E. / Sorin, M. / Teyssedou, A.	Modeling the exergy performance of heat pump systems without using refrigerant thermodynamic properties	69-79
Zeng, Rong / Li, Hongqiang / Jiang, Runhua / Liu, Lifang / Zhang, Guoqiang	A novel multi-objective optimization method for CCHP–GSHP coupling systems	149-158
Calcerano, Filippo / Martinelli, Letizia	Numerical optimisation through dynamic simulation of the position of trees around a stand-alone building to reduce cooling energy consumption	234-243
Di Pilla, L. / Desogus, G. / Mura, S. / Ricciu, R. / Di Francesco, M.	Optimizing the distribution of Italian building energy retrofit incentives with Linear Programming	21-27
Khoury, J. / Mbayed, R. / Salloum, G. / Monmasson, E.	Predictive demand side management of a residential house under intermittent primary energy source conditions	110-120
Zhang, Zhengyan / Wang, Bo	Research on the life-cycle CO 2 emission of China's construction sector	244-255
Wu, Ting / Lei, Chengwang	A review of research and development on water wall for building applications	198-208
Shen, Chong / Li, Xianting	Solar heat gain reduction of double glazing window with cooling pipes embedded in venetian blinds by utilizing natural cooling	173-183
Hu, Yunpeng / Chen, Huanxin / Li, Guannan / Li, Haorong / Xu, Rongji / Li, Jiong	A statistical training data cleaning strategy for the PCA-based chiller sensor fault detection, diagnosis and data reconstruction method	270-278

About this
data sheet
IssueID
38618
Published on:
27/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Energy and Buildings - January 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Energy and Buildings - January 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.