Construction and Building Materials - November 2023

Published:	November 2023

Author(s)	Title	Page(s)
Liu, Dawei / Zhang, Zhigang / Zhang, Xiaoyue / Chen, Zhaohui	3D printing concrete structures: State of the art, challenges, and opportunities	133364
Song, Siyuan / Liu, Zhaoxia / Liu, Guoming / Cui, Xiangfei / Sun, Jiahao	Application of biochar cement-based materials for carbon sequestration	133373
Zhong, Shuai / Hu, Xiaopeng / Yang, Bo / Peng, Gang	Bond performance between cementitious grout and normal concrete subjected to freeze–thaw damage	133344
Wang, Liyang / Deng, Zongcai	Bond-slip response of end-hook and half-hooked steel fibers in moderately strong SIFCON matrix	133334
Liu, Yisong / Zhang, Zhi-yuan / Zheng, Yang / Zhang, Xiaozhu / Wang, Xiaofei / Yin, Xianghui	Comparison of magnesium oxysulfate (MOS) cement and reactive magnesia cement (RMC) under different curing conditions: Physical properties, mechanisms, and environmental impacts	133317
Mârșolea (Cristea), Adriana Cornelia / Orbeci, Cristina / Rusen, Edina / Stanescu, Paul Octavian / Brincoveanu, Oana / Irodia, Roberta / Pîrvu, Cristian / Dinescu, Adrian / Bobirica, Constantin / Mocanu, Alexandra	Design of polyurethane composites obtained from industrial plastic wastes, pyrite and red mud	133319
Caluk, Nerma / Seisdedos, Gonzalo / Azizinamini, Atorod	Destructive and non-destructive testing of potential lunar polymer concrete for future lunar habitable infrastructure	133395
Cao, Xing / Yang, Weichen / Liu, Shiwei / Fang, Lin / Liu, Runjie / Ma, Rui	Durability of calcium-rich municipal solid waste incineration fly ash-based geopolymer to sulfate and sulfuric acid	133389
Zhang, Lei / Shi, Jun / Peng, Qianzhuo / Chen, Cheng	Dynamic behavior of Haikou marine clay treated with cement	133320
Liu, Yi / Wang, Li / Yuan, Qiang / Peng, Jianwei	Effect of coarse aggregate on printability and mechanical properties of 3D printed concrete	133338
Yin, Yunchao / Huang, Jian / Wang, Tiezhu / Yang, Rong / Hu, Hailong / Manuka, Mesfin / Zhou, Fengyang / Min, Junjie / Wan, Huilong / Yuan, Donghui / Ma, Baoguo	Effect of Hydroxypropyl methyl cellulose (HPMC) on rheology and printability of the first printed layer of cement activated slag-based 3D printing concrete	133347
Cuevas, Karla / Weinhold, Joachim / Stephan, Dietmar / Kim, Ji-Su	Effect of printing patterns on pore-related microstructural characteristics and properties of materials for 3D concrete printing using in situ and ex situ imaging techniques	133220
Ding, Bo / Ng, Serina / Ou, Zhihua	Effect of sulfate on the compatibility between polycarboxylate superplasticizer and cement-based materials with or without silica fume	133256
Noorvand, Hassan / Arce, Gabriel / Hassan, Marwa	Engineered cementitious composites design framework for pavement applications	133271
de Sousa, Talita Miranda / de Medeiros Melo Neto, Osires / Lucena, Adriano Elísio de Figueirêdo Lopes / Nóbrega, Edilza Rakel	Enhancing workability and sustainability of asphalt mixtures: Investigating the performance of beeswax as a novel additive for warm mix asphalt	133306
Mitra, Debzani / Kabir, Sk Faisal / Ali, Ayman / Mehta, Yusuf / Elshaer, Mohamed	Evaluation of the impact of nanomodification on Self-Healing behavior of asphalt binders	133358
Li, Fan / Zhang, Xiao / Zhang, Kaifeng / Li, Feng / Wang, Linbing / Cao, Junsheng	Exploring the effect of different waste polypropylene matrix composites on service performance of modified asphalt using analytic hierarchy process	133292
Kina, Ceren / Tanyildizi, Harun / Turk, Kazim	Forecasting the compressive strength of GGBFS-based geopolymer concrete via ensemble predictive models	133299
Rashad, Alaa M. / Gharieb, Mahmoud	Impact of long-term natural weathering on the properties of alkali-activated fly ash mortars modified with silica fume and sodium tripolyphosphate	133354
Neelamegam, Prakhash / Muthusubramanian, Bhuvaneshwari	Influence of Polyethylenimine (PEI) in enhancement of microstructure and surface morphology of recycled construction and demolition waste aggregate in concrete by carbonation	133342
Neji, M. / Dewitte, C. / Durville, B.	Influence of porosity network on the chemo-mechanical evolution of low-pH cementitious materials subjected to calcareous attack	133313
Dafico, Leticia C. M. / Barreira, Eva / Almeida, Ricardo M. S. F. / Vicente, Romeu	Machine learning models applied to moisture assessment in building materials	133330
Nukah, Promise D. / Abbey, Samuel J. / Booth, Colin A. / Nounu, Ghassan	Mapping and synthesizing the viability of cement replacement materials via a systematic review and meta-analysis	133290
Saberian, Mohammad / Tajaddini, Arash / Li, Jie / Zhang, Guomin / Wang, Lei / Sun, De'an / Maqsood, Tariq / Roychand, Rajeev	Mechanical properties of polypropylene fibre reinforced recycled concrete aggregate for sustainable road base and subbase applications	133352
Kumar Bothara, Jitendra / Ahmad, Naveed / Ingham, Jason M. / Dizhur, Dmytro	Mechanical properties of stone masonry set in mud mortar and contained by steel wire mesh	133348
Zhang, Yuanchao / Huang, Ming / Jiang, Yujing / Wang, Zhi	Mechanics, damage and energy degradation of rock-concrete interfaces exposed to high temperature during cyclic shear	133229
Yu, Kang / Wang, YaChao / Qu, Chunlong / Xue, Xinxin / Zhao, JiangPing	Multifunctional Si-C-P flame-retardant coatings blended by chitosan hydrochloride/melamine polyphosphate/ammonium phosphomolybdate in spodumene tailings geopolymer	133340
Qi, Dong / Haorui, Zheng / Lijuan, Zhang / Guowen, Sun / Haitao, Yang / Yifan, Li	Numerical simulation on diffusion–reaction behavior of concrete under sulfate–chloride coupled attack	133237
Karboua, Laid / Bekhiti, Melik / Zaitri, Rebih	Optimizing the mechanical behavior of clay using cement and PVC aggregates with the application of a mixture design method	133343
Hu, Yueyang / Ren, Xuehong / Ye, Jiayuan / Luan, Zhengbin / Xiao, Yongli / Zhang, Wensheng	Performance of a steel slag-based supplementary cementitious material via the synergistic modification of binary fly ash and gypsum system	133186
Zhao, Jianjun / Wang, Xue / Li, Shuang / Li, Yanqiu	Polypropylene fiber reinforced alkali-activated ultra-light foam insulation material: Performance study and mechanism analysis	133241
Gu, Kang / Chen, Bing / Jiang, Zhengwu	Properties and high-temperature resistance of tailing-based magnesium oxysulfate (MOS) cement affected by phosphogypsum and water-binder ratio	133341
Mercedes, Luis / Bernat-Maso, Ernest / Gil, Lluís	Protective layers for concrete elements against impact load	133356
Sun, Xin-Po / Jiang, Zhe-Yuan / Xu, Ao / Fu, Xian-Lei / Che, Chi / Tian, Zi-Jian / Bi, Yu-Zhang	Recycle of discarded masks in civil Engineering: Current status and future opportunities with silane coupling agent modified discarded masks	133266
Gomasa, Ramesh / Talakokula, Visalakshi / Jyosyula, Sri Kalyana Rama / Bansal, Tushar	A review on health monitoring of concrete structures using embedded piezoelectric sensor	133179
Tourtelot, Julia / d'Espinose de Lacaillerie, Jean-Baptiste / Duc, Myriam / Mertz, Jean-Didier / Bourgès, Ann / Keita, Emmanuel	Strengthening mechanisms of clay building materials by starch	133215
Moghaddas Tafreshi, S. N. / Amiri, A. / Dawson, A.R	Sustainable use of End-of-Life-Tires (ELTs) in a vibration isolation system	133316
Yang, Keun-Hyeok / Kwon, Seung-Jun / Hwang, Ji-Won / Yoon, Yong-Sik	Temperature effect on strength and chloride migration in nuclear power plant concrete	133345
Lei, Ming / Deng, Simin / Liu, Zhichao / Wang, Fazhou / Hu, Shuguang	Understanding of EPS beads on mechanical properties and void morphology of a CO2-solidified foam concrete based on solid wastes	133388
Yang, Sanqiang / Yang, Zhenyu / Chen, Kangkang / Zhang, Leifeng / Chu, Jiayi	Using case study on the performance of rural cement stabilizing construction waste recycling road base	133351
Danish, Aamar / Karadag, Omer / Bilir, Turhan / Ozbakkaloglu, Togay	Valorization of biomass ashes in the production of cementitious composites: A comprehensive review of properties and performance	133244

Author(s)

Title

Page(s)

Liu, Dawei / Zhang, Zhigang / Zhang, Xiaoyue / Chen, Zhaohui

3D printing concrete structures: State of the art, challenges, and opportunities

133364

Song, Siyuan / Liu, Zhaoxia / Liu, Guoming / Cui, Xiangfei / Sun, Jiahao

Application of biochar cement-based materials for carbon sequestration

133373

Zhong, Shuai / Hu, Xiaopeng / Yang, Bo / Peng, Gang

Bond performance between cementitious grout and normal concrete subjected to freeze–thaw damage

133344

Wang, Liyang / Deng, Zongcai

Bond-slip response of end-hook and half-hooked steel fibers in moderately strong SIFCON matrix

133334

Liu, Yisong / Zhang, Zhi-yuan / Zheng, Yang / Zhang, Xiaozhu / Wang, Xiaofei / Yin, Xianghui

Comparison of magnesium oxysulfate (MOS) cement and reactive magnesia cement (RMC) under different curing conditions: Physical properties, mechanisms, and environmental impacts

133317

Mârșolea (Cristea), Adriana Cornelia / Orbeci, Cristina / Rusen, Edina / Stanescu, Paul Octavian / Brincoveanu, Oana / Irodia, Roberta / Pîrvu, Cristian / Dinescu, Adrian / Bobirica, Constantin / Mocanu, Alexandra

Design of polyurethane composites obtained from industrial plastic wastes, pyrite and red mud

133319

Caluk, Nerma / Seisdedos, Gonzalo / Azizinamini, Atorod

Destructive and non-destructive testing of potential lunar polymer concrete for future lunar habitable infrastructure

133395

Cao, Xing / Yang, Weichen / Liu, Shiwei / Fang, Lin / Liu, Runjie / Ma, Rui

Durability of calcium-rich municipal solid waste incineration fly ash-based geopolymer to sulfate and sulfuric acid

133389

Zhang, Lei / Shi, Jun / Peng, Qianzhuo / Chen, Cheng

Dynamic behavior of Haikou marine clay treated with cement

133320

Liu, Yi / Wang, Li / Yuan, Qiang / Peng, Jianwei

Effect of coarse aggregate on printability and mechanical properties of 3D printed concrete

133338

Yin, Yunchao / Huang, Jian / Wang, Tiezhu / Yang, Rong / Hu, Hailong / Manuka, Mesfin / Zhou, Fengyang / Min, Junjie / Wan, Huilong / Yuan, Donghui / Ma, Baoguo

Effect of Hydroxypropyl methyl cellulose (HPMC) on rheology and printability of the first printed layer of cement activated slag-based 3D printing concrete

133347

Cuevas, Karla / Weinhold, Joachim / Stephan, Dietmar / Kim, Ji-Su

Effect of printing patterns on pore-related microstructural characteristics and properties of materials for 3D concrete printing using in situ and ex situ imaging techniques

133220

Ding, Bo / Ng, Serina / Ou, Zhihua

Effect of sulfate on the compatibility between polycarboxylate superplasticizer and cement-based materials with or without silica fume

133256

Noorvand, Hassan / Arce, Gabriel / Hassan, Marwa

Engineered cementitious composites design framework for pavement applications

133271

de Sousa, Talita Miranda / de Medeiros Melo Neto, Osires / Lucena, Adriano Elísio de Figueirêdo Lopes / Nóbrega, Edilza Rakel

Enhancing workability and sustainability of asphalt mixtures: Investigating the performance of beeswax as a novel additive for warm mix asphalt

133306

Mitra, Debzani / Kabir, Sk Faisal / Ali, Ayman / Mehta, Yusuf / Elshaer, Mohamed

Evaluation of the impact of nanomodification on Self-Healing behavior of asphalt binders

133358

Li, Fan / Zhang, Xiao / Zhang, Kaifeng / Li, Feng / Wang, Linbing / Cao, Junsheng

Exploring the effect of different waste polypropylene matrix composites on service performance of modified asphalt using analytic hierarchy process

133292

Kina, Ceren / Tanyildizi, Harun / Turk, Kazim

Forecasting the compressive strength of GGBFS-based geopolymer concrete via ensemble predictive models

133299

Rashad, Alaa M. / Gharieb, Mahmoud

Impact of long-term natural weathering on the properties of alkali-activated fly ash mortars modified with silica fume and sodium tripolyphosphate

133354

Neelamegam, Prakhash / Muthusubramanian, Bhuvaneshwari

Influence of Polyethylenimine (PEI) in enhancement of microstructure and surface morphology of recycled construction and demolition waste aggregate in concrete by carbonation

133342

Neji, M. / Dewitte, C. / Durville, B.

Influence of porosity network on the chemo-mechanical evolution of low-pH cementitious materials subjected to calcareous attack

133313

Dafico, Leticia C. M. / Barreira, Eva / Almeida, Ricardo M. S. F. / Vicente, Romeu

Machine learning models applied to moisture assessment in building materials

133330

Nukah, Promise D. / Abbey, Samuel J. / Booth, Colin A. / Nounu, Ghassan

Mapping and synthesizing the viability of cement replacement materials via a systematic review and meta-analysis

133290

Saberian, Mohammad / Tajaddini, Arash / Li, Jie / Zhang, Guomin / Wang, Lei / Sun, De'an / Maqsood, Tariq / Roychand, Rajeev

Mechanical properties of polypropylene fibre reinforced recycled concrete aggregate for sustainable road base and subbase applications

133352

Kumar Bothara, Jitendra / Ahmad, Naveed / Ingham, Jason M. / Dizhur, Dmytro

Mechanical properties of stone masonry set in mud mortar and contained by steel wire mesh

133348

Zhang, Yuanchao / Huang, Ming / Jiang, Yujing / Wang, Zhi

Mechanics, damage and energy degradation of rock-concrete interfaces exposed to high temperature during cyclic shear

133229

Yu, Kang / Wang, YaChao / Qu, Chunlong / Xue, Xinxin / Zhao, JiangPing

Multifunctional Si-C-P flame-retardant coatings blended by chitosan hydrochloride/melamine polyphosphate/ammonium phosphomolybdate in spodumene tailings geopolymer

133340

Qi, Dong / Haorui, Zheng / Lijuan, Zhang / Guowen, Sun / Haitao, Yang / Yifan, Li

Numerical simulation on diffusion–reaction behavior of concrete under sulfate–chloride coupled attack

133237

Karboua, Laid / Bekhiti, Melik / Zaitri, Rebih

Optimizing the mechanical behavior of clay using cement and PVC aggregates with the application of a mixture design method

133343

Hu, Yueyang / Ren, Xuehong / Ye, Jiayuan / Luan, Zhengbin / Xiao, Yongli / Zhang, Wensheng

Performance of a steel slag-based supplementary cementitious material via the synergistic modification of binary fly ash and gypsum system

133186

Zhao, Jianjun / Wang, Xue / Li, Shuang / Li, Yanqiu

Polypropylene fiber reinforced alkali-activated ultra-light foam insulation material: Performance study and mechanism analysis

133241

Gu, Kang / Chen, Bing / Jiang, Zhengwu

Properties and high-temperature resistance of tailing-based magnesium oxysulfate (MOS) cement affected by phosphogypsum and water-binder ratio

133341

Mercedes, Luis / Bernat-Maso, Ernest / Gil, Lluís

Protective layers for concrete elements against impact load

133356

Sun, Xin-Po / Jiang, Zhe-Yuan / Xu, Ao / Fu, Xian-Lei / Che, Chi / Tian, Zi-Jian / Bi, Yu-Zhang

Recycle of discarded masks in civil Engineering: Current status and future opportunities with silane coupling agent modified discarded masks

133266

Gomasa, Ramesh / Talakokula, Visalakshi / Jyosyula, Sri Kalyana Rama / Bansal, Tushar

A review on health monitoring of concrete structures using embedded piezoelectric sensor

133179

Tourtelot, Julia / d'Espinose de Lacaillerie, Jean-Baptiste / Duc, Myriam / Mertz, Jean-Didier / Bourgès, Ann / Keita, Emmanuel

Strengthening mechanisms of clay building materials by starch

133215

Moghaddas Tafreshi, S. N. / Amiri, A. / Dawson, A.R

Sustainable use of End-of-Life-Tires (ELTs) in a vibration isolation system

133316

Yang, Keun-Hyeok / Kwon, Seung-Jun / Hwang, Ji-Won / Yoon, Yong-Sik

Temperature effect on strength and chloride migration in nuclear power plant concrete

133345

Lei, Ming / Deng, Simin / Liu, Zhichao / Wang, Fazhou / Hu, Shuguang

Understanding of EPS beads on mechanical properties and void morphology of a CO2-solidified foam concrete based on solid wastes

133388

Yang, Sanqiang / Yang, Zhenyu / Chen, Kangkang / Zhang, Leifeng / Chu, Jiayi

Using case study on the performance of rural cement stabilizing construction waste recycling road base

133351

Danish, Aamar / Karadag, Omer / Bilir, Turhan / Ozbakkaloglu, Togay

Valorization of biomass ashes in the production of cementitious composites: A comprehensive review of properties and performance

133244

Advertisement

Construction and Building Materials - November 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.