Construction and Building Materials - novembre 2023

Publié:	novembre 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Liu, Dawei / Zhang, Zhigang / Zhang, Xiaoyue / Chen, Zhaohui	3D printing concrete structures: State of the art, challenges, and opportunities	133364
Song, Siyuan / Liu, Zhaoxia / Liu, Guoming / Cui, Xiangfei / Sun, Jiahao	Application of biochar cement-based materials for carbon sequestration	133373
Zhong, Shuai / Hu, Xiaopeng / Yang, Bo / Peng, Gang	Bond performance between cementitious grout and normal concrete subjected to freeze–thaw damage	133344
Wang, Liyang / Deng, Zongcai	Bond-slip response of end-hook and half-hooked steel fibers in moderately strong SIFCON matrix	133334
Liu, Yisong / Zhang, Zhi-yuan / Zheng, Yang / Zhang, Xiaozhu / Wang, Xiaofei / Yin, Xianghui	Comparison of magnesium oxysulfate (MOS) cement and reactive magnesia cement (RMC) under different curing conditions: Physical properties, mechanisms, and environmental impacts	133317
Mârșolea (Cristea), Adriana Cornelia / Orbeci, Cristina / Rusen, Edina / Stanescu, Paul Octavian / Brincoveanu, Oana / Irodia, Roberta / Pîrvu, Cristian / Dinescu, Adrian / Bobirica, Constantin / Mocanu, Alexandra	Design of polyurethane composites obtained from industrial plastic wastes, pyrite and red mud	133319
Caluk, Nerma / Seisdedos, Gonzalo / Azizinamini, Atorod	Destructive and non-destructive testing of potential lunar polymer concrete for future lunar habitable infrastructure	133395
Cao, Xing / Yang, Weichen / Liu, Shiwei / Fang, Lin / Liu, Runjie / Ma, Rui	Durability of calcium-rich municipal solid waste incineration fly ash-based geopolymer to sulfate and sulfuric acid	133389
Zhang, Lei / Shi, Jun / Peng, Qianzhuo / Chen, Cheng	Dynamic behavior of Haikou marine clay treated with cement	133320
Liu, Yi / Wang, Li / Yuan, Qiang / Peng, Jianwei	Effect of coarse aggregate on printability and mechanical properties of 3D printed concrete	133338
Yin, Yunchao / Huang, Jian / Wang, Tiezhu / Yang, Rong / Hu, Hailong / Manuka, Mesfin / Zhou, Fengyang / Min, Junjie / Wan, Huilong / Yuan, Donghui / Ma, Baoguo	Effect of Hydroxypropyl methyl cellulose (HPMC) on rheology and printability of the first printed layer of cement activated slag-based 3D printing concrete	133347
Cuevas, Karla / Weinhold, Joachim / Stephan, Dietmar / Kim, Ji-Su	Effect of printing patterns on pore-related microstructural characteristics and properties of materials for 3D concrete printing using in situ and ex situ imaging techniques	133220
Ding, Bo / Ng, Serina / Ou, Zhihua	Effect of sulfate on the compatibility between polycarboxylate superplasticizer and cement-based materials with or without silica fume	133256
Noorvand, Hassan / Arce, Gabriel / Hassan, Marwa	Engineered cementitious composites design framework for pavement applications	133271
de Sousa, Talita Miranda / de Medeiros Melo Neto, Osires / Lucena, Adriano Elísio de Figueirêdo Lopes / Nóbrega, Edilza Rakel	Enhancing workability and sustainability of asphalt mixtures: Investigating the performance of beeswax as a novel additive for warm mix asphalt	133306
Mitra, Debzani / Kabir, Sk Faisal / Ali, Ayman / Mehta, Yusuf / Elshaer, Mohamed	Evaluation of the impact of nanomodification on Self-Healing behavior of asphalt binders	133358
Li, Fan / Zhang, Xiao / Zhang, Kaifeng / Li, Feng / Wang, Linbing / Cao, Junsheng	Exploring the effect of different waste polypropylene matrix composites on service performance of modified asphalt using analytic hierarchy process	133292
Kina, Ceren / Tanyildizi, Harun / Turk, Kazim	Forecasting the compressive strength of GGBFS-based geopolymer concrete via ensemble predictive models	133299
Rashad, Alaa M. / Gharieb, Mahmoud	Impact of long-term natural weathering on the properties of alkali-activated fly ash mortars modified with silica fume and sodium tripolyphosphate	133354
Neelamegam, Prakhash / Muthusubramanian, Bhuvaneshwari	Influence of Polyethylenimine (PEI) in enhancement of microstructure and surface morphology of recycled construction and demolition waste aggregate in concrete by carbonation	133342
Neji, M. / Dewitte, C. / Durville, B.	Influence of porosity network on the chemo-mechanical evolution of low-pH cementitious materials subjected to calcareous attack	133313
Dafico, Leticia C. M. / Barreira, Eva / Almeida, Ricardo M. S. F. / Vicente, Romeu	Machine learning models applied to moisture assessment in building materials	133330
Nukah, Promise D. / Abbey, Samuel J. / Booth, Colin A. / Nounu, Ghassan	Mapping and synthesizing the viability of cement replacement materials via a systematic review and meta-analysis	133290
Saberian, Mohammad / Tajaddini, Arash / Li, Jie / Zhang, Guomin / Wang, Lei / Sun, De'an / Maqsood, Tariq / Roychand, Rajeev	Mechanical properties of polypropylene fibre reinforced recycled concrete aggregate for sustainable road base and subbase applications	133352
Kumar Bothara, Jitendra / Ahmad, Naveed / Ingham, Jason M. / Dizhur, Dmytro	Mechanical properties of stone masonry set in mud mortar and contained by steel wire mesh	133348
Zhang, Yuanchao / Huang, Ming / Jiang, Yujing / Wang, Zhi	Mechanics, damage and energy degradation of rock-concrete interfaces exposed to high temperature during cyclic shear	133229
Yu, Kang / Wang, YaChao / Qu, Chunlong / Xue, Xinxin / Zhao, JiangPing	Multifunctional Si-C-P flame-retardant coatings blended by chitosan hydrochloride/melamine polyphosphate/ammonium phosphomolybdate in spodumene tailings geopolymer	133340
Qi, Dong / Haorui, Zheng / Lijuan, Zhang / Guowen, Sun / Haitao, Yang / Yifan, Li	Numerical simulation on diffusion–reaction behavior of concrete under sulfate–chloride coupled attack	133237
Karboua, Laid / Bekhiti, Melik / Zaitri, Rebih	Optimizing the mechanical behavior of clay using cement and PVC aggregates with the application of a mixture design method	133343
Hu, Yueyang / Ren, Xuehong / Ye, Jiayuan / Luan, Zhengbin / Xiao, Yongli / Zhang, Wensheng	Performance of a steel slag-based supplementary cementitious material via the synergistic modification of binary fly ash and gypsum system	133186
Zhao, Jianjun / Wang, Xue / Li, Shuang / Li, Yanqiu	Polypropylene fiber reinforced alkali-activated ultra-light foam insulation material: Performance study and mechanism analysis	133241
Gu, Kang / Chen, Bing / Jiang, Zhengwu	Properties and high-temperature resistance of tailing-based magnesium oxysulfate (MOS) cement affected by phosphogypsum and water-binder ratio	133341
Mercedes, Luis / Bernat-Maso, Ernest / Gil, Lluís	Protective layers for concrete elements against impact load	133356
Sun, Xin-Po / Jiang, Zhe-Yuan / Xu, Ao / Fu, Xian-Lei / Che, Chi / Tian, Zi-Jian / Bi, Yu-Zhang	Recycle of discarded masks in civil Engineering: Current status and future opportunities with silane coupling agent modified discarded masks	133266
Gomasa, Ramesh / Talakokula, Visalakshi / Jyosyula, Sri Kalyana Rama / Bansal, Tushar	A review on health monitoring of concrete structures using embedded piezoelectric sensor	133179
Tourtelot, Julia / d'Espinose de Lacaillerie, Jean-Baptiste / Duc, Myriam / Mertz, Jean-Didier / Bourgès, Ann / Keita, Emmanuel	Strengthening mechanisms of clay building materials by starch	133215
Moghaddas Tafreshi, S. N. / Amiri, A. / Dawson, A.R	Sustainable use of End-of-Life-Tires (ELTs) in a vibration isolation system	133316
Yang, Keun-Hyeok / Kwon, Seung-Jun / Hwang, Ji-Won / Yoon, Yong-Sik	Temperature effect on strength and chloride migration in nuclear power plant concrete	133345
Lei, Ming / Deng, Simin / Liu, Zhichao / Wang, Fazhou / Hu, Shuguang	Understanding of EPS beads on mechanical properties and void morphology of a CO2-solidified foam concrete based on solid wastes	133388
Yang, Sanqiang / Yang, Zhenyu / Chen, Kangkang / Zhang, Leifeng / Chu, Jiayi	Using case study on the performance of rural cement stabilizing construction waste recycling road base	133351
Danish, Aamar / Karadag, Omer / Bilir, Turhan / Ozbakkaloglu, Togay	Valorization of biomass ashes in the production of cementitious composites: A comprehensive review of properties and performance	133244

Informations
sur cette fiche
IssueID
70971
Publié(e) le:
28.10.2023
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.