Construction and Building Materials - October 2023

Published:	October 2023

Articles in this Issue

Author(s)	Title	Page(s)
Xu, Lichao / Ruan, Xin / Fang, Tao / Wei, Yi / Li, Yue	3D morphology reconstruction-based modelling and mechanical degradation study of corroded low alloy steel specimens	132649
Tran, Thai Son / Nguyen, Son Dong / Lee, Hyun Jong / Tran, Van Phuc	Advanced crack detection and segmentation on bridge decks using deep learning	132839
Seo, Joonho / Kim, Naru / Yang, Beomjoo / Kim, G. M.	Alterations in the reaction properties of Portland cement against coupled deteriorations of magnesium and sulfate upon carbonation curing	132806
Wang, Jiawei / Han, Yifeng / Cao, Zhenglong / Xu, Xiyong / Zhang, Jiake / Xiao, Feipeng	Applications of optical fiber sensor in pavement Engineering: A review	132713
Oyebisi, Solomon / Alomayri, Thamer	Artificial intelligence-based prediction of strengths of slag-ash-based geopolymer concrete using deep neural networks	132606
Antolik, A. / Jóźwiak-Niedźwiedzka, D.	ASR induced by chloride- and formate-based deicers in concrete with non-reactive aggregates	132811
Capitão, Silvino / Picado-Santos, Luís / Almeida, Arminda / Mendes, Fábio	Assessment of aged and unaged hot and warm asphalt concrete containing high reclaimed asphalt pavement rate rejuvenated with waste cooking oil	132801
Sanchez, M. / Navacerrada, M. A. / Fort, R. / Barbero-Barrera, M. M.	Assessment of limestone cladding deterioration due to crystallisation of salts by non-destructive techniques	132640
Chang, Qiuhao / O'Rear, Edgar A. / Ghos, Sagar / Zaman, Musharraf / Huang, Liangliang / Wu, Xingru	An atomistic model of aged asphalt guided by the oxidation chemistry of benzylic carbon with application to asphalt rejuvenated with a triglyceride	132743
Chen, Zhijun / Huang, Liang / Yan, Libo / Cai, Heng / Luo, Xiaofeng / Li, Yin	Autoclaved steel slag coarse aggregate: A potential solution for sustainable concrete production	132627
Wang, Chenxia / Zhou, Yangsheng / Cao, Fubo / Su, Tian / Wang, Fangying	Bond behavior between section steel and concrete in partially encased composite structural members	132521
Shabani, Erfan / Mostofinejad, Davood / Saljoughian, Alireza	Bond behavior of prestressed FRP sheet-concrete joints: Comparison of EBROG and EBR methods	132752
Makashev, Kuanysh / Triantafyllou, Savvas P. / Thermou, Georgia E. / Tizani, Walid	Bond behaviour of light and heavy carbon fibre TRM to masonry interfaces	132508
Lu, Zhongyu / Zhao, Chenyang / Zhao, Jinxia / Shi, Cuiqing / Xie, Jianhe	Bond durability of FRP bars and seawater–sea sand–geopolymer concrete: Coupled effects of seawater immersion and sustained load	132667
Liu, Qizhou / Li, Jinzhou / Li, Mingfa / Wu, Xuankun / Li, Yinchu / Zhang, Lu	Bond performance prediction model of defective grout in post-fire sleeve connections under cyclic loading	132442
Jian, Xiangyang / Zhao, Zhongwei / Jin, Zeyuan / Wang, Bin / Liang, Bingbei	Bond–slip behavior of steel and fiber fabric based on experiment and numerical method	132799
Wu, Wenda / Wang, Tao / Gong, Qingnan / Zhang, Kaijian / An, Xiaopeng / Wang, Dehui	Characteristics of the alkali-silica reaction in seawater and sea sand concrete with different water-cement ratios	132822
Ren, Dongya / Xu, Jie / Su, Shaonan / Tian, Gangsheng / Chen, Xu / Zhang, Allen / Ai, Changfa	Characterization of internal pore size distribution and interconnectivity for asphalt concrete with various porosity using 3D CT scanning images	132751
Yu, Weixiao / Wang, Sudi / Miao, Yinghao	Characterizing force-chain network in aggregate blend using discrete element method and complex network theory	132724
Chen, Chunhong / Wang, Lei / Liu, Ronggui / Zhu, Pinghua / Liu, Hui / Wang, Xinjie / Yu, Jiang / Chen, Yunchun	Chloride penetration of concrete exposed to dry-wet cycle with various dry-wet ratios and temperature	132883
Ashish, Prabin Kumar / Sreeram, Anand / Xu, Xiong / Chandrasekar, Pavan / Jagadeesh, Ajayshankar / Adwani, Dheeraj / Padhan, Rabindra Kumar	Closing the Loop: Harnessing waste plastics for sustainable asphalt mixtures – A comprehensive review	132858
Aker, Saed N. A. / Ozer, Hasan	Cold recycling mix design approach targeting permanent deformation resistance	132704
Yoo, Sun-Jae / Yuan, Tian-Feng / Choi, Jin-Seok / Yoon, Young-Soo	Comparative bond-slip response of ribbed CFRP bar to UHPC after exposure to high temperature	132583
Li, Chen / Qin, Wen / Fu, Zhen / Dai, Jiasheng / Ma, Feng	Comparative evaluation on decay process of asphalt-aggregate interfaces under solution erosion	132698
Aurelie Tchouateu Kamwa, Rolande / Tchadjie Noumbissie, Leonel / Tome, Sylvain / Idriss, Eguekeng / Nemaleu, Juvenal Giogetti Deutou / Tommes, Birgit / Woschko, Dennis / Janiak, Christoph / Etoh, Marie-Annie	A comparative study of compressed lateritic earth bricks stabilized with natural pozzolan-based geopolymer binders synthesized in acidic and alkaline conditions	132652
Li, Ning / Unluer, Cise	A comparative study of ethylenediamine tetraacetic acid induced gas-solid and liquid-solid accelerated carbonation for enhancement of steel slag aggregates	132539
Liu, Gang / Zhao, Mingzhi / Liu, Kaiwen / Connolly, David P. / Jiang, Xin / Zhang, Lei	Comparative study of performance of wicking and conventional railway geotextiles under the synergetic simulation of train loads and flooding	132840
Zhang, Tong / Wen, Qianxin / Gao, Shan / Tang, Jupeng	Comparative study on mechanical and environmental properties of coal gangue sand concrete	132646
Giammaria Praticò, Filippo / Perri, Giusi / De Rose, Manuel / Vaiana, Rosolino	Comparing bio-binders, rubberised asphalts, and traditional pavement technologies	132813
Wang, Yukui / He, Zhenxing / Wang, Kaiyun / Bai, Yanbo / Li, Penghao	Comparing dynamic performance between new sleeper-damping and floating-slab track system	132588
Zhang, Yi / Zhu, Yanmei / Ren, Qiang / He, Bei / Jiang, Zhengwu / Van Tittelboom, Kim / De Schutter, Geert	Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials	132750
Lin, Xu / Wang, Min / Yan, Kezhen	Comparison on the performance of solid coumarone-indene resin and liquid coumarone-indene resin modified asphalt	132629
Sun, Guoqing / Hu, Zhe / Zhang, Jiupeng / Xue, Hengxiao	Comprehensive evaluation of ballastless-track sealants based on macro–micro tests and principal component analysis	132708
Duan, Chong-da / Yu, Xue-yang / Yao, Xiao-wei / Zhu, Jia-hua / Li, Guang-yue	Coupling reinforcement of uranium tailings via Klebsiella-induced calcium carbonate precipitation and waterborne polyurethane	132641
Shi, Can / Zhou, Yu / Xu, Lei / Zhang, Xu / Guo, Yunlong	A critical review on the vertical stiffness irregularity of railway ballasted track	132715
Li, Yongliang / Bian, Yanan / Liu, Chenhui	Damage and failure mechanism of basalt fiber-reinforced gangue-cemented backfill under uniaxial compression	132872
Ottenhaus, Lisa-Mareike / Yan, Zidi / Brandner, Reinhard / Leardini, Paola / Fink, Gerhard / Jockwer, Robert	Design for adaptability, disassembly and reuse – A review of reversible timber connection systems	132823
Vranešić, Katarina / Lakušić, Stjepan / Serdar, Marijana / Alar, Vesna	Detrimental effect of stray current on rails and fastening systems in urban railway tracks	132645
Liu, Wenhuan / Zhao, Zhongzhong / Wan, Yongfeng / Hu, Jing / Lei, Fan / Wang, Siying / Li, Hui	Development and application of lead smelting slag eco-cementitious material: Synergistic excitation regulation and heavy metal solidification	132843
Wu, Huixia / Liang, Chaofeng / Yang, Dingyi / Ma, Zhiming	Development of sustainable geopolymer materials made with ground geopolymer waste powder as renewable binder up to 100%	132746
Shahbazi, R. / Habibnejad Korayem, A. / Bazli, M.	Dispersion of hydrophobic waste amorphous carbon powder in cementitious environment and its effect on the permeability of cement paste	132888
Wang, Cong / Zhang, Peng / Guo, Jinjun / Wang, Juan / Zhang, Tianhang	Durability and microstructure of cementitious composites under the complex environment: Synergistic effects of nano-SiO2 and polyvinyl alcohol fiber	132621
Nemade, Pushkraj Anil / Pasla, Dinakar / Chandrappa, Anush K.	Durability assessment of concrete with natural and Linz Donawitz slag as coarse aggregates	132617
Liu, Zhihua / Gan, Liqin / Rong, Hui	Durability of concrete exposed to laboratory-simulated marine microbe-induced corrosion	132563
Sobhani, J. / Komijani, S. / Shekarchi, M. / Ghazban, F.	Durability of concrete mixtures containing Iranian electric arc furnace slag (EAFS) aggregates and lightweight expanded clay aggregates (LECA)	132597
Medina, Darío Flores / Carolina Hernández Martínez, M. / Flores Medina, Nelson / Hernández-Olivares, F.	Durability of rubberized concrete with recycled steel fibers from tyre recycling in aggresive enviroments	132619
Yıldırım, Musa / Ozhan, Hacer Bilir	Durability properties of basalt fiber-reinforced mortars with different mineral admixtures exposed to high temperatures	132574
Sözen, Şahin / Yıldız, Okay	Early estimation of 28-day compressive strength of mortars using regression and neural network-based models	132789
Trambitski, Yahor / Kizinievič, Olga / Gaspar, Florindo / Kizinievič, Viktor / Valente, Joana F. A.	Eco-friendly unfired clay materials modified by natural polysaccharides	132783
Parmo, Parmo / Hanus, Jean-Luc / Belayachi, Naima / Bailly, Patrice	Effect of aggregate/binder ratio on mechanical and energy absorption properties of a straw-lime composite material	132613
Lu, Ting / Wei, Zuoan / Hesham El Naggar, M. / Wang, Wensong / Yang, Yonghao / Tian, Xi / Guo, Hongwei	Effect of chemical environment on copper tailings reinforced by microbially induced carbonate precipitation	132894
Nemati, Manouchehr / Nematzadeh, Mahdi / Rahimi, Sepideh	Effect of fresh concrete compression technique on pre- and post-heating compressive behavior of steel fiber-reinforced concrete: Experiments and RSM-based optimization	132786
Shangguan, Minghui / Xie, Youjun / Wang, Fan / Long, Guangcheng / Tang, Zhuo / Chen, Yue / Xu, Shengqiao / Li, Hui / Gao, Ce / Liu, Mengjing	Effect of low-vacuum environment on the strength and permeability of cement-based materials	132676
Ali, Suha Ismail Ahmed / Lublóy, Éva	Effect of metakaolin and boron-carbide on the properties of magnetite, basalt and quartz concrete at different elevated temperatures	132593
Du, Wei / Liu, Bo / Zuo, Danying / Wu, Mingli / Li, Hongjun / Ba, Mingfang / Liu, Junzhe / Lin, Runsheng / Liu, Quantao	Effect of microcapsules on the self-repairing ability of limestone calcined clay cement (LC3) mortar at different temperatures	132718
Liu, Jin / Ran, Yinhong / Zarei, Mohammad / Tabasi, Ehsan / Naseri, Alireza / Worya Khordehbinan, Mohammad	Effect of nano molybdenum disulfide (Nano-MoS2) on fracture behavior of Warm mix asphalt (WMA)	132820
Du, Longyu / Zhou, Jiehang / Lai, Jianzhong / Wu, Kai / Yin, Xuexiang / He, Yuanyuan	Effect of pore structure on durability and mechanical performance of 3D printed concrete	132581
Yao, Hongru / Wang, Qiang / Zhang, Zhen / Zhou, Xiaolong / Cao, Yadong	Effect of styrene–butadiene–styrene triblock copolymer structure on the rheological properties of high content SBS polymer modified asphalts	132738
Wu, Jiangyuan / Huang, Yuxiang / Hu, Juan / Lei, Wencheng / Wang, Xiaoxia / Zhang, Yahui / Yu, Wenji	Effects of density and resin content on the rebonding performance of bamboo scrimber composite	132848
Xu, Xiaoxing / Yuan, Yong / Wang, Siqi / Zhang, Dehong / Zhu, Hongping	Effects of structural symmetry of introduced polyether diol on low temperature tolerance of laminated polyurethane bearings in bridges	132688
Kumar Dash, Pankaj / Kumar Parhi, Suraj / Patro, Sanjaya Kumar / Panigrahi, Ramakanta	Efficient machine learning algorithm with enhanced cat swarm optimization for prediction of compressive strength of GGBS-based geopolymer concrete at elevated temperature	132814
Ospitia, Nicolas / Tsangouri, Eleni / Pourkazemi, Ali / Wang, Qinjian / Keshavarzi, MohammaSadegh / Stiens, Johan H. / Aggelis, Dimitrios G.	Elastic and electromagnetic monitoring of TRC sandwich panels in fracture under four-point bending	132824
Geng, Zhi / Liu, Yongqi / Shi, Jinjie	Electrochemical responses of carbon steel in ordinary Portland cement blended with calcium sulfoaluminate cement	132788
Thomoglou, Athanasia K. / Falara, Maria G. / Voutetaki, Maristella E. / Fantidis, Jacob G. / Tayeh, Bassam A. / Chalioris, Constantin E.	Electromechanical properties of multi-reinforced self-sensing cement-based mortar with MWCNTs, CFs, and PPs	132566
Shukla, Manoj Kumar / Walia, Ashish / Purohit, Vedant / Vyas, Vidhi / Singh, Gagandeep	Establishment of best practices for laboratory evaluation of stabilized base layers and comparative study on influence of different types of stabilizers	132691
Jiao, Bozong / Pan, Baofeng / Liu, Fei / Yin, Peng / Li, Zihan	Evaluating the interfacial properties between crumb rubber modified asphalt and aggregates using molecular dynamics simulation methods	132809
Teixeira, Jamilla Emi Sudo Lutif / Amaecing Junior, Carlos Martins / Ribeiro de Rezende, Lilian / Castelo Branco, Verônica Teixeira Franco / Kim, Yong-Rak	Evaluation of asphalt concrete’s fatigue behavior using cyclic semi-circular bending test	132772
Zhu, Anyou / Wu, Hanli / Wang, Yizhuang David / Liu, Jenny	Evaluation of feasibility and performance of foamed Fire-Resistant coating materials	132692
Reza Keymanesh, Mahmoud / Amani, Saeed / Omran, Ali Taghinezhad / Karimi, Mohammad M.	Evaluation of the impact of long-term aging on fracture properties of warm mix asphalt (WMA) with high RAP contents	132671
Yu, Huanan / Zhou, Sihang / Qian, Guoping / Zhang, Chao / Shi, Changyun / Yao, Ding / Ge, Jinguo	Evaluation of the microscale structure and performance of asphalt mixtures under different design methods	132810
Jaczewski, Mariusz / Pszczola, Marek / Alenowicz, Jacek / Rys, Dawid / Dolzycki, Bohdan / Jaskula, Piotr	Evaluation of thermal cracking probability for asphalt concretes with high percentage of RAP	132726
Zhu, Linlin / Zheng, Mulian / Zhang, Wei / Chen, Wang / Ou, Zhongwen	Evolution and mechanism on shrinkage of high-performance concrete with full aeolian sand cured by superabsorbent polymer	132846
Grzesiak, Szymon / Schultz-Cornelius, Milan / Pahn, Matthias	Experimental and analytical evaluation of externally bonded BFRP and CFRP strips on the load-bearing behaviour of reinforced concrete structures using distributed fibre optic sensing	132452
Cao, Xiangpeng / Yu, Shiheng / Cui, Hongzhi	Experimental study of the in-situ rebar splicing technique to reinforce 3D-printed concrete in vertical directions	132756
He, Bin / Qin, Xinhao / Zhou, Zhiqiang / Xu, Bin / Yu, Songling / Qin, Guanglei / Liu, Kun / Peng, Xiaochuang / Nie, Xiaoqing / Ma, Fuli / Ma, Yingjian / Han, Pengju / Bai, Xiaohong	Experimental study on composite flocculant-electroosmosis combined with segmented solidification treatment of high-water-content slurry	132729
Mao, Hao / Guan, Biao / Jing, Chenchen / Lv, Jianguo / Xu, Tianqiu / Fu, Rui / Ling, Xue / Liu, Changmeng	Experimental study on mechanical properties and bond behavior of wire and arc additive manufacturing steel bar	132836
Zarzuela, Rafael / Cervera, Jaime J. / Moreno, Ignacio / Gil, M. L. Almoraima / Mosquera, María J.	Exploring the low cell adhesion of photoinduced superhydrophilic surfaces for improving the effect of antifouling protective coatings on porous building materials	132573
Xia, Qian / Guo, Chaoxia / Li, Yiqing / Liu, Taikang / Liu, Junjun	Fatigue characteristics of ancient brick masonry under cyclic load	132653
Eshetu Deresse, Nuhamin / Sarem, Mina / Nasser, Hussein / François, Stijn / Verstrynge, Els	Fatigue fracture quantification in brittle cementitious materials using acoustic emission testing and digital image correlation	132635
Meng, Lingkai / Shi, Zhifei / Hao, Shengwang / Cheng, Zhibao	Filtering property of periodic in-filled trench barrier for underground moving loads	132655
Katlav, Metin / Turk, Kazim / Turgut, Paki	Flexural performance of V-shaped RC folded plates: The role of plate thickness and fiber hybridization	132815
Yoon, Jinyoung / Kim, Hyunjun / Ju, Suhwan / Li, Zhanzhao / Pyo, Sukhoon	Framework for rapid characterization of fresh properties of cementitious materials using point cloud and machine learning	132647
Woo, Byeong-Hun / Ryou, Jae-Suk / Kim, Joo Young / Lee, Binna / Kim, Hong Gi / Kim, Jee-Sang	Freeze-thaw durability estimation for concrete through the Gaussian process regression with kernel convolution	132825
Kia, Alalea	Freeze-thaw durability of air-entrained high-strength clogging resistant permeable pavements	132767
Liang, Yan / Song, Hongfang	Frost stochastic damage meso-equivalence method of concrete with freeze–thaw cycles	132359
Xie, Zonglin / Yuan, Qiang / Yao, Hao / Zhong, Fuwen / Jiang, Mengjie	Hardened properties and microstructure change of sulphoaluminate cement modified with different doses of styrene-butadiene rubber latex	132618
Sun, Xuesong / Li, Yanjun / Wei, Xinlei / Yu, Jianwen / Wang, Mingxing	High contents of steel slag in the road concrete: Hydration mechanism, mechanical property and durability performance	132703
Zakeremamreza, Amin / Kianifar, Mohammad E. / Chibuisi, Chidera / Ahmadi, Ehsan / Salami, Mohammad R.	A high-performance rubberised alkali-activated mortar for repair of RC beams	132610
Maldonado-Alameda, A. / Mañosa, J. / López-Montero, T. / Catalán-Parra, R. / Chimenos, J. M.	High-porosity alkali-activated binders based on glass and aluminium recycling industry waste	132741
Yuan, Yan / Chen, Hongyu / Wang, Yefei / Xu, Song / Xue, Bin / Zou, Guilian / Wang, Bin	How calcium and magnesium ions affect the stability of asphalt with anionic emulsifiers: A molecular dynamics study	132770
Roy, Nabanita / Mondal, Purbayan Ghosh / Kuna, Kranthi Kumar	Image-based indices of aggregates for predicting the initial skid resistance of bituminous pavements	132776
Rondinella, Fabio / Daneluz, Fabiola / Hofko, Bernhard / Baldo, Nicola	Improved predictions of asphalt concretes’ dynamic modulus and phase angle using decision-tree based categorical boosting model	132709
Shi, Xinxin / Ning, Baokuan / Wang, Junxiang / Cui, Taotao / Zhong, Mingyang	Improving flexural toughness of foamed concrete by mixing polyvinyl alcohol-polypropylene fibers: An experimental study	132689
Chen, Meng / Wang, Guangquan / Zhang, Tong / Ma, Mingyang / Tang, Shubin / Zhang, Yao	Improving the dynamic splitting properties of engineered cementitious composites using hybrid synthetic polymer and recycled steel fibres	132567
Amini, Amir / Akrami, Masoud	Improving the performance and rheological properties of RAP binders using gilsonite/nanoclay and softer binder	132797
Kassu, Aschalew	An in situ real-time monitoring of the hydration and dehydration of building gypsum: Conventional and standoff Raman spectroscopy coupled with chemometrics analysis	132682
Wang, Yuanxia / Liu, Nazhen / Liu, Xiangju / Liu, Xinyu / Sun, Congtao / Chen, Xuwei / Hou, Baorong	In-situ monitoring of pH and Cl− concentration and rebar corrosion at the rebar/mortar interface	132712
Hassan, Waqas / Alshameri, Badee / Jamil, Syed Muhammad / Maqsood, Zain / Haider, Abbas / Shahzad, Arfan	Incorporating potassium-rich waste material in a sustainable way to stabilize dispersive clay: A novel practical approach for the construction industry	132717
Michelini, E. / Ferretti, D. / Pizzati, M.	The influence of density on the fracture energy of AAC: From experimental investigation to the calibration of a cohesive law	132547
Fares, Ali Issa / Sohel, Kazi Md Abu / Al-Jabri, Khalifa / Al-Saidy, Abdullah	Influence of ferrochrome slag as coarse and fine aggregates on thermal and strength properties of concrete at high temperatures	132807
Amani, Saeed / Jahanbakhsh, Hamid / Karimi, Mohammad M.	Influences of induced heating-healing on fracture properties and life extension of asphalt mixtures: Experimental investigations	132785
Lu, Yi / Xu, Changhao / Baghbani, Abolfazl	Initial state of excavated soil and rock (ESR) to influence the stabilisation with cement	132879
Liao, Xiaolong / Yan, Qixiang / Zhang, Yifeng / Zhong, Haojia / Qi, Mingshan / Wang, Chunkai	An innovative deep neural network coordinating with percussion-based technique for automatic detection of concrete cavity defects	132700
Zhou, Li / Zhang, Tianqi / Luo, Yanyun	Insights of the vehicle-track-girder system dynamic response changes caused by the thermal deformation of CRTS III ballastless track in the natural environment	132745
Chen, Chen / Hu, Yongbiao / Jia, Feng / Wang, Xuebin / La, Xiaoyang / Zhang, Ruwei / Xu, Jindong	Intelligent compaction quality evaluation using Morse wavelet transform and deep neural network	132697
Zhang, Chuan / Yan, Qixiang / Zhang, Yifeng / Liao, Xiaolong / Zhong, Hanqing	Intelligent monitoring of concrete-rock interface debonding via ultrasonic measurement integrated with convolutional neural network	131865
Ziaee, Seyed Ali / Fatemi, Saeed / Zarei, Mohammad / Fini, Elham H.	Introduction of calcium lignosulfonate to delay aging in bituminous mixtures	132798
Nie, Xinxin / Yin, Qian / Wang, Qi / Ren, Minghui / Deng, Tianci / Jing, Hongwen / Zhang, Qiang / Wu, Jiangyu	Investigating mechanical properties of cemented gangue backfill materials subjected to static-dynamic combined loads	132674
Ding, Jianzhao / He, Sihong / Huang, Renle / Xiao, Liang / Mei, Guoxiong	Investigating the chloride ion resistance of cracked concrete through Reverse-seepage and Saturation based Action Anti-corrosion Tech (RS-AAT): Experimental and numerical analysis	132639
Maleki Toulabi, Hossein / Hosseini, Seyed Azim / Haj Najafi, Leila	Investigating the effect of using recycled waste concrete powder (RWCP) on the performance of thin layer surface treatment: Microsurfacing	132734
Sengul, Tayfun / Akray, Noyan / Vitosoglu, Yasar	Investigating the effects of stabilization carried out using fly ash and polypropylene fiber on the properties of highway clay soils	132590
Zhang, Fengqiao / Yang, Yuguang / Hendriks, Max A. N.	Investigation of concrete crack kinematics through probability density field of the location of acoustic emission events	132595
Jin, Tian / Liu, Liping / Yang, Ruikang / Sun, Lijun / Yuan, Jiang	Investigation of interlayer bonding performance between asphalt concrete overlay and Portland cement concrete using inclined shear fatigue test	132681
Xue, Kairu / Su, Mengwei / Yang, Xin / Qi, Jingqin / Liu, Mingyuan / Ju, Chenggong / Peng, Xiao / Wu, Yan	Investigation of the water resistance of non-sintered wrap-shell lightweight aggregates with high content solid waste and its application in water permeable bricks	132612
Luan, Yingcheng / Ma, Yuan / Ma, Tao / Xia, Fei	Investigation on the effects of physical property and stress state of graded crushed stone on resilient modulus and permanent deformation	132628
Huang, Weiqi / Liu, Liping / Li, Mingchen / Gao, Li	Investigation on the influence of conditioning time on the performance of hot-recycled mixture under ambient temperature	132838
Meng, Yan / Ouyang, Jian / Ou, Jinping	Investigation on the wetting behavior of asphalt emulsion on aggregate for asphalt emulsion mixture	132844
Corraliza, S. / Pasandín, A. R. / Pérez, I. / Delgado, C.	Laboratory evaluation of environmentally friendly alternative mineral powders for micro-surfacing treatments manufacture	132683
Khankhaje, Elnaz / Kim, Taehoon / Jang, Hyounseung / Rafieizonooz, Mahdi	Laboratory evaluation of heavy metal removal from stormwater runoff by pervious concrete pavement containing seashell and oil palm kernel shell	132648
Škulteckė, Judita / Vaitkus, Audrius / Šernas, Ovidijus	Laboratory investigation on the use of wood waste fibres in SMA mixtures	132727
Yang, Xiaolong / Feng, Yumeng / Rong, Hongliu / Liang, Junlin / Zhang, Guoming / Huang, Ying	The leaching-deterioration properties and leaching mechanism of cement mortar under dry-wet cycles	132672
Abul Hashem, Md. / Hasan Zahin, Md. Enamul / Haque, Md. Sanaul / Milu, Md. Shohag / Anik Hasan, Md. / Payel, Sofia	Leather shaving dust utilization in brick preparation: Solid waste management in tannery	132769
Li, Jingrong / Lu, Ye / Ma, Hongwei	Linear and nonlinear guided wave based debonding monitoring in CFRP-reinforced steel structures	132673
Singh, Harvinder / Siddique, Rafat	Long term durability assessment of self-compacting concrete made with crushed recycled glass and metakaolin	132656
Chen, Bowen / Zhang, Tirui / Geng, Yue / Wang, Qinghe / Zhao, Guoqing / Yang, Jinsheng	Longitudinal shear tests and design methods for corrugated steel–concrete composite slabs with recycled coarse aggregate	132870
Wang, S. Y. / Jin, L. / Feng, Y. / Wang, Z. Y. / Yin, T. Y. / Liu, K. N. / Dong, E. L. / Yu, R.	A low carbon embedded low water/binder cement-based composites (LW/BCC) based on steel slag powder and microwave pre-curing: Experiments and Life Cycle Assessment (LCA)	132778
Kakasor Ismael Jaf, Dilshad / Abdulrahman, Payam Ismael / Mohammed, Ahmed Salih / Kurda, Rawaz / Qaidi, Shaker M. A. / Asteris, Panagiotis G.	Machine learning techniques and multi-scale models to evaluate the impact of silicon dioxide (SiO2) and calcium oxide (CaO) in fly ash on the compressive strength of green concrete	132604
Reza Nadi Abiz, M. / Esfahani, M. Reza / Tanhadoust, Amin / Nehdi, Moncef L. / Mohammad Banijamali, S.	Magnesium nanoparticle modified cement-based composites: Performance and compatibility in repair applications	132781
Umesh, B.	Mechanical and durability properties of standard and high strength geopolymer concrete using particle packing theory	132722
Mahfoud, Elie / Maherzi, Walid / Ndiaye, Khadim / Benzerzour, Mahfoud / Aggoun, Salima / Abriak, Nor-Edine	Mechanical and microstructural properties of just add water geopolymer cement comprised of Thermo-Mechanicalsynthesis Sediments-Fly ash mix	132626
Pradhan, Shashwati Soumya / Mishra, Umesh / Biswal, Sushant Kumar	Mechanical and microstructural study of slag based alkali activated concrete incorporating RHA	132685
Li, T. Y. / Chen, J. Q. / Xiao, Y. / Zhang, J. / Shan, B. / Dai, S. Q. / Qin, S. J. / Huang, B.	Mechanical behavior of glued-in GFRP rod in glubam: Experimental and analytical study	132812
De Pascale, Beatrice / Tataranni, Piergiorgio / Lantieri, Claudio / Bonoli, Alessandra / Vignali, Valeria	Mechanical performance and environmental assessment of porous asphalt mixtures produced with EAF steel slags and RAP aggregates	132889
Wu, Jia-Qi / Lu, Zhanhui / Chen, Yung-Tsang / Ghiassi, Bahman / Shi, Weizhuo / Li, Bo	Mechanical properties and cracking behaviour of lightweight engineered geopolymer composites with fly ash cenospheres	132622
Borçato, Allan G. / Thiesen, Marisa / Medeiros-Junior, Ronaldo A.	Mechanical properties of metakaolin-based geopolymers modified with different contents of quarry dust waste	132854
Wang, Haiman / Ni, Wankui / Yuan, Kangze	Mechanical properties, microstructural evolution, and environmental impacts of recycled polypropylene fiber stabilized loess	132850
Zhao, Bing / Wang, Guangjin / Zhao, Kui / Wang, Menglai / Wu, Bisheng / Li, Shujian / Chen, Qinglin / Geng, Jiabo	Mechanical properties, permeability and microstructure of steam-cured fly ash mortar mixed with phosphogypsum	132582
Wang, Yang / Xiao, Hong / Nadakatti, Mahantesh M. / Wang, Xiaoyu / Fang, Shuwei	Mechanism of rail corrugation combined with friction self-excited vibration and wheel-track resonance	132782
Tavva, Tejaswini Lakshmi / Reddy, Kusam Sudhakar	A mechanistic-empirical approach to estimate the degree of Reclaimed Asphalt Pavement (RAP) bitumen activity	132912
Vallejos, Saúl / Trigo-López, Miriam / Sardon, Haritz / González-Martín, José Manuel / González-Moreno, Sara / García, José M.	Metal-free organocatalysts for high hydrolytic stability single component polyurethane adhesives and their application in decorative insulation facades manufacturing	132643
Yunlong, Zhang / Meizhu, Chen / Yuechao, Zhao / Shaopeng, Wu / Dongyu, Chen / Zhengxu, Gan / Yansong, Fan	Microencapsulated waste cooking oil derivatives for building thermoregulation	132644
Lu, Tong / Hofko, Bernhard / Sun, Daquan / Mirwald, Johannes / Eberhardsteiner, Lukas / Hu, Mingjun	Microscopic and rheologic characterization of third generation self-repairing microcapsule modified asphalt	132841
Yang, Shu / Liao, Bo / Liu, Tiancheng / Li, Tingyu	Microscopic R-curve simulation study of asphalt material fracture	132794
Xu, Huining / Zhan, He / Wang, Meng / Tan, Yiqiu	Microstructural characteristics evolution of asphalt mastics under cyclic environmental temperature variations	132795
Li, Wenxu / Xie, Youjun / Ma, Kunlin / Long, Guangcheng / Li, Ning / Jiang, Wei / Peng, Yiming	Microstructure characteristics and evolution of the bonding interface between SCC and steam-cured concrete	132837
Li, Jiangchuan / Zeng, Tian / Chang, Jun	Microstructure of Fe(OH)3 phase in hydration products of calcium sulfoaluminate cement	132609
Yang, Yuanyi / Li, Caiying / Li, Hui / Bai, Caoyuan / Wang, Zuowen / Yang, Tingting / Gu, Tao	Microwave-thermal-assisted curing method on geopolymer preparation from Panzhihua high-titanium slag by alkali activation	132614
Sharaky, I. A. / Seleem, M. H. / ELamary, Ahmed S.	Minimizing the crumb rubber effects on the flexural behaviour of the layered RC beams cast using rubberized concrete with or without recycled tire steel fibers	132503
Celebi, Erkan / Kırtel, Osman / İstegün, Berna / Goktepe, Fatih / Burhan Navdar, Muhammet / Subaşı, Ayşenur / Zülfikar, Abdullah Can	Mitigation of high-speed train induced surface vibrations by open trench with aerated concrete panel walls	132771
Zhu, Tianyu / Chen, Zhonghui / Zhang, Lingfei / Nian, Gengqian / Chen, Yanwei / Hao, Jianshuai	Modeling and fracture behavior of mesoscale concrete considering actual aggregate shapes and placement domain shapes	132821
Tian, Weiwei / Gao, Yingli / Li, Yuelin / Zhu, Juncai / Zhan, Mingtao / Wang, Shuo	Molecular dynamics study on the effect of rheological performance of asphalt with different plasticizers	132791
Liu, Qinlong / Lu, Wei / Zhu, Jing / Qi, Qinde / Li, Guangzhou / Li, Dongbo	Nano-scale mechanics of coarse-grained C-S-H with molecular dynamics	132494
Liu, Jianan / Yuan, Linjian / Wang, Zhenjun / Jing, Haosen / Shao, Tingquan / Chen, Hao	A new method for evaluating the uniformity of steel slag distribution in steel slag asphalt mixture based on deep learning	132766
Li, Yuang / Zhang, Wenhua / Sun, Guowen / Xiu, Yuxin / Zhang, Zixiang / Li, Chen / Zhang, Yunsheng	A new orientational molding method for ultra-high performance concrete with high content of steel fiber and investigation on its flexure and axial tensile properties	132755
Phung, Ba-Nhan / Le, Thanh-Hai / Nguyen, Thuy-Anh / Hoang, Huong-Giang Thi / Ly, Hai-Bang	Novel approaches to predict the Marshall parameters of basalt fiber asphalt concrete	132847
Wan, L. / Garcia-Hernández, A. / Cui, G. / Liu, P.	A novel performance-based method to design asphalt mixtures	132792
Hassan, Waqas / Alshameri, Badee / Haider, Abbas / Maqsood, Zain / Jamil, Syed Muhammad / Shahzad, Arfan	A novel technique for the construction industry to mitigate dispersibility and internal erosion problems of sodium rich clays by using Water-Soluble potassium rich ions material	132780
Liang, Minfei / Zhang, Yu / He, Shan / Chen, Yu / Schlangen, Erik / Savija, Branko	On the chemo-mechanical evolution process of high-volume slag cement paste	132891
Gacoin, A. / Li, A.	Optimal composition of a starch-hemp agro-composite materials	132711
Rosales, M. / Agrela, F. / Sánchez de Rojas, M. I. / Cabrera, M. / Rosales, J.	Optimisation of hybrid eco-efficient mortars with aggregates from construction and demolition waste and olive biomass ash	132634
Zhan, You / Luo, Zhiwei / Lin, Xiuquan / Nie, Zilong / Deng, Qiangsheng / Qiu, Yanjun / Wang, Tengfei	Pavement preventive maintenance decision-making for high antiwear and optimized skid resistance performance	132757
Wang, Shengwei / Yan, Ming / Wang, Qiang	PbCl2 effects on the strength and permeability of plastic concrete cutoff walls	132650
Morea, F. / Nosetti, R. / González, L. / Sánchez, A.	Performance analysis of non-conventional Stone Mastic asphalt (SMA) elaborated with crumb rubber bitumen or by mean of glass macrofibers addition	132654
Chen, Xuyong / Ai, Yangzheng / Wu, Qiaoyun / Cheng, Shukai / Wei, Yichen / Xu, Xiong / Fan, Tao	Potential use of nano calcium carbonate in polypropylene fiber reinforced recycled aggregate concrete: Microstructures and properties evaluation	132871
Zhang, Xueqing / Akber, Muhammad Zeshan / Poon, C. S. / Zheng, Wei	Predicting the 28-day compressive strength by mix proportions: Insights from a large number of observations of industrially produced concrete	132754
Dong, Shaoce / Wu, Xu / Qi, Xiao / Affolter, Christian / Terrasi, Giovanni P. / Xian, Guijun	Prediction model of long-term tensile strength of glass fiber reinforced polymer bars exposed to alkaline solution based on Bayesian optimized artificial neural network	132885
Fan, Congcong / Zheng, Yuanxun / Wang, Shaoqiang / Ma, Junjie	Prediction of bond strength of reinforced concrete structures based on feature selection and GWO-SVR model	132602
Wang, Ling / Zhou, Hao / Zhang, Junfei / Wang, Zixu / Zhang, Lei / Nehdi, Moncef L.	Prediction of concrete strength considering thermal damage using a modified strength-maturity model	132779
Bouras, Y. / Li, L.	Prediction of high-temperature creep in concrete using supervised machine learning algorithms	132828
Cai, Zhichao / Liu, Yunsheng / Liu, Xuehua / Zhang, Jing / Li, Tangbing / Xu, Bichuan	Prediction of interference current of buried pipeline and study on corrosion of Q235A steel	132739
Dan, Han-Cheng / Zhang, Zhi / Shan, Hongyu / Cao, Wei	Preliminary characterization on the dynamic mechanism of asphalt mixture under on-site vibratory compaction	132695
Yin, Kunpeng / Luo, Zhongtao / Liu, Xiaohai / Pan, Han / Zhi, Tianyi / Feng, Hu / Song, Yatao / Su, Yanfeng	Preparation and application of Na2SiO3@EC microcapsules for self-healing alkali-activated slag	132651
Jia, Jinpeng / Hu, Nanyan / Ye, Yicheng / Yao, Nan / Huang, Yang / Fu, Fanghui	Preparation of C/M−S−H cementitious materials from phosphate tailings and their dehydration and hydration mechanism	132865
Jin, Zihao / Cui, Chengjia / Wan, Ziheng / Su, Ying / He, Xingyang / Ma, Baoguo / Zhi, Zhenzhen / Chen, Shun / Wang, Bin	Preparation of eco-friendly functional lightweight gypsum: Effect of three different lightweight aggregates	132875
Fekadu Haile, Bezawit / Lifshitz Sherzer, Gili / Peterson, Karl / Grasselli, Giovanni	Progressive highly stressed volume for size effect analysis	132600
Devaraj, Vigneshkumar / Mangottiri, Vasudevan / Balu, Soundara	Prospects of sustainable geotechnical applications of manufactured sand slurry as controlled low strength material	132747
Mirwald, Johannes / Niszl, Christina / Eberhardsteiner, Lukas / Hofko, Bernhard	Quantifying the influence of heating and resting on the bitumen microstructure	132710
Im, Sumin / Liu, Junxing / Cho, Seongmin / Moon, Jaegeun / Park, Jaeyeon / Wi, Kwangwoo / Seok, Seungwook / Lim, Seungmin / Bae, Sungchul	Quantitative characterization of the interfacial transition zone around lightweight and normal aggregates in cement mortars at different water-to-binder ratios	132584
Ding, Jinghan / Yu, Jiakang / Zhu, Jinmeng / Zhang, Lianbing / Wang, Qi / Yang, Fan / Tian, Qing / Zhang, Chunyang / Zhao, Xichen / Dong, Wenqiang / Li, Xuanhua	Quaternary ammonium silane modified Nanolime for the consolidation and antifungal of stone relics	132605
Liu, Zixuan / Wang, Ping / Chen, Rong / Xu, Tengfei	Rapid evaluation of the high-speed railway bridge vertical deformation threshold and train operation safety performance based on the virtual track inspection method	132438
Lu, Jian-xin	Recent advances in high strength lightweight concrete: From development strategies to practical applications	132905
Bian, Zuwang / Lu, Jian-xin / Huang, Yujie / Xuan, Dongxing / Ou, Guangfeng / Poon, Chi Sun	Recycling of waste glass in lightweight geopolymer using incineration bottom ash as a foaming agent: Towards energy conservation	132632
Gigar, Firesenay Zerabruk / Khennane, Amar / Liow, Jong-leng / Tekle, Biruk Hailu / Katoozi, Elmira	Recycling timber waste into geopolymer cement bonded wood composites	132793
Liu, Jianlei / Yu, Zhumei / Zheng, Jie / Peng, Huanan / Zhang, Zhou / Ye, Hongde / Peng, Siyan / Lin, Xinmei / Duan, Wenjiu / Wang, Qikun	Red mud/silica sand tailing-derived glasses and glass-ceramics for architectural decoration: crystallization, structure, properties and immobilization of heavy metals	132873
Xu, Ning / Li, Ming / Fang, Saiyin / Huang, Changlin / Chen, Chumin / Zhao, Yue / Mao, Feilong / Deng, Tingting / Wang, Yuan	Research on the detection of the hole in wood based on acoustic emission frequency sweeping	132761
Luan, Yingcheng / Ma, Yuan / Ma, Tao / Wang, Chuanle / Xia, Fei	Research on the effects of asphalt performance on rutting resistance and its correlation with rutting performance indicators	132773
Elsayed, Mahmoud / Elmaaty, Mohamed Abou / Mohamed, Reem	Retrofitting of post-heated R.C. columns using steel fiber reinforced self-compacting concrete jackets	132637
Shilar, Fatheali A. / Ganachari, Sharanabasava V. / Patil, Veerabhadragouda B. / Bhojaraja, B. E. / Yunus Khan, T. M. / Almakayeel, Naif	A review of 3D printing of geopolymer composites for structural and functional applications	132869
Zhang, Dong / Bu, Wankui / Wang, Qingyuan / Liu, Pinpin / Shao, Zhuhai / Liu, Xingfei / Li, Guangyue / Zhou, Ying	A review of recent developments and challenges of using phase change materials for thermoregulation in asphalt pavements	132669
Song, Pengfei / Wang, Yuan / Wang, Xuhao / Wang, Yakun / Hou, Xin / Che, Junlin / Wang, Xin	Rheological behavior of basalt fiber sprayed cementitious composites (BFSCC)	132666
Suchismita, Arpita / Singh, Dharamveer	Rheological performance of bitumen mixed with laboratory simulated polymerized RAP binders	132706
Wang, Xinjie / Liu, Xiaolin / Wu, Yongkang / Zhu, Pinghua / Liu, Hui / Chen, Chunhong / Wang, Fajing	Road use and electrothermal performance of graphene-conductive asphalt-recycled pervious concrete under severe cold environment	132829
Fu, Changhao / Zhan, Qiwei / Zhang, Xuan / Zhou, Juanlan / Wu, Yang / Li, Xiaojin / Zhou, Pengcheng / Xu, Guangjin	Self-healing properties of cement-based materials in different matrix based on microbial mineralization coupled with bimetallic hydroxide	132686
Lou, Ping / Sun, Zhen	Service performance of CRTS II ballastless track in high temperature tunnel	132705
Klemczak, Barbara / Gołaszewski, Jacek / Smolana, Aneta / Gołaszewska, Małgorzata / Cygan, Grzegorz	Shrinkage behaviour of self-compacting concrete with a high volume of fly ash and slag experimental tests and analytical assessment	132608
Phiangphimai, Chattarika / Joinok, Gonganok / Phoo-ngernkham, Tanakorn / Hanjitsuwan, Sakonwan / Damrongwiriyanupap, Nattapong / Sae-Long, Worathep / Sukontasukkul, Piti / Chindaprasirt, Prinya	Shrinkage, compressive and bond strengths of alkali activated/cement powder for alternative coating applications	132631
Caetano Hormidas Caldas, Pedro Henrique / Garcez de Azevedo, Afonso Rangel / Teixeira Marvila, Markssuel	Silica fume activated by NaOH and KOH in cement mortars: Rheological and mechanical study	132623
Addae, Daniel Twum / Rahman, Mujib / Abed, Ahmed	State of art literature review on the mechanical, functional and long-term performance of cold mix asphalt mixtures	132759
Liu, Gang / Qian, Zhendong / Wu, Xiaoyun / Zhang, Xiangfei	Stress responses analysis of asphalt mixture particles based on average principle during the rolling compaction process of weld SBDP	132805
Ye, Kai / Dasari, Aravind / Hooper, Thomas J. N.	Structural characterization and fire performance of geopolymer-glass fiber composite panels	132633
Chen, Long / Chen, Jingyun / Li, Mingliang / Li, Jun / Li, Yuhua	Study of fatigue performance of fiber reinforced high-viscosity asphalt mastic based on rheology	132784
Wang, Xinyan / Liu, Zhentao / Liu, Cheng / Wang, Liang / Chen, Mingxu / Yue, Gongbing	Study of mix design and performance of alkali-activated concrete with recycled concrete aggregate	132882
Wang, Huan / Liu, Quantao / Wu, Shaopeng / Lv, Yang / Wan, Pei / Gong, Xing / Liu, Gang	Study of synergistic effect of diatomite and modified attapulgite on reducing asphalt volatile organic compounds emission	132827
Liang, Meichen / Guo, Meng / Xu, Xiaoxiao / Liu, Xu / Liu, Hao / Bi, Yufeng	Study on accelerated aging rate of asphalt binder under multi-factors coupling conditions	132819
Yuan, Gaoang / Zhang, Jinliang / Ren, Ziming / Zhao, Zhenzhen	Study on compaction characteristics and mechanical performance deterioration of large stone porous asphalt mixes	132777
Menglu, Liu / Peng, Liu / Jun, Wu / Zhiwu, Yu / Ying, Chen / Xiang, Cheng	Study on improvement of waterproofing performance of CCCW with silicone waterproof material and waterbased capillary inorganic waterproofer	132842
Yang, Qingchun / Wu, Jiaming / Jiang, Jun / Li, Quanliang / Yu, Libo / Han, Zhengqi / Lu, Xiaolei / Ye, Zhengmao	Study on the composition and hydration properties at early stages of high-sodium Portland cement clinker under the synergistic effects of SO3	132696
Song, Qifeng / Deng, Shaoxiang / Ling, Tung-Chai	Study on the crushing strength improvement of artificial aggregates made with 100% solid wastes using polyvinyl alcohol solution	132576
Peng, Chao / Yang, Dongjin / Liu, Yafeng / You, Zhanping / Xu, Fang / Guan, Peiwen / Ruan, Di / Ning, Yunfei / Ye, Zhile	Study on the effect of carbon nanotubes on the properties of wasted engine oil recycled asphalt binder	132800
Bi, Yutao / Yang, Caiqian / Zhu, Fawang / Chen, Jun / Pan, Yong	Study on the freeze–thaw cycles and carbonization of ultra-high molecular weight polyethylene fiber reinforced engineered cementitious composite for link slab	132371
Lu, Xiang / Wang, Liang / Chen, Chen / Chen, Jiankang / Zhou, Jingren / Deng, Jun	Study on the influence mechanism of material damage on the cavitation erosion properties of hydraulic concrete	132849
Li, Menglin / Xie, Jun / Wu, Shaopeng / Chen, Junlin	Study on the influence mechanism of recycled concrete aggregate on strength of asphalt mixtures	132720
Qin, Lei / Wang, Haibo / Zhao, Chong / Chu, Xuanxuan / Shi, Feifan / Guo, Chengchao / Wang, Fuming	Study on the interface damage of CRTS II track slab under high- and low-temperature cycles based on acoustic emission	132742
Xu, Xuefeng / Cui, Sheng'ai / Cao, Zhuoying / Zhang, Shuhao / Ju, Jiann-wen Woody / Liu, Pin / Wang, Xuewei	Study on the interfacial bonding performance of basalt ultra-high performance concrete repair and reinforcement materials under severe service environment	132624
Li, Kang / Xie, Xiongyao / Huang, Changfu / Zhou, Biao / Duan, Weiwei / Lin, Honglin / Wang, Cheng	Study on the penetration capability of GPR for the steel-fibre reinforced concrete (SFRC) segment based on numerical simulations and model test	132719
Zhang, Xijun / Du, Mingrui / Fang, Hongyuan / Li, Bin / Zhao, Peng / Zhai, Kejie / Yao, Xupei / Du, Xueming / Shi, Mingsheng / Ma, Duo	Study on the shear strength and damage constitutive model of the contact surface between PVA fiber-enhanced cement mortar and concrete	132571
Li, Xuezhong / Li, Zhuguo	Surface treatment of inorganic modifier for improving carbonation resistance of geopolymers	132748
Luan, Congqi / Wang, Jinbang / Zhou, Zonghui	Synergic effect of triethanolamine and C-S-H seeding on early hydration of the limestone calcined clay cement in UHPC	132675
Ren, Zhisheng / Wang, Lu / Wang, Hao / Gao, Fuhao / Liu, Shuhua / Ren, Jun	Synergistic solidification/stabilization mechanism of cadmium in phosphogypsum slag-based cementitious material	132802
Shi, Tao / Lou, Ping	Time-variant reliability of interlayer damage of CRTS-II slab track by combining the second-order fourth-moment and outcrossing method	132790
Xiao, Lei / Xue, Xuanyi / Wang, Neng / Ren, Qiubing / Hua, Jianmin / Wang, Fei	A transfer learning-based approach to fatigue life prediction of corroded bimetallic steel bars using small samples	132679
Xiao, Xiong / Li, Quanwang	Two-stage deterioration model updating of RC structures in marine environment using long-term field inspection data	132817
Gu, Meixiang / Cai, Xiaocong / Mo, Haizhao / Wang, Qing	Unconfined compressive behavior of column with geogrid-encased recycled aggregate: Test and simulation	132528
Qasrawi, Hisham	The use of NDT to evaluate maturity for taking off formwork under hot curing	132437
Hamdi, Oualid Mahieddine / Ahmed-Chaouch, Ali / Saidani, Messaoud / Alioui, Hichem	Use of the Algerian natural pozzolan for the production of a geopolymer as a complete cement replacement	132723
Seitllari, Aksel / Boz, Ilker / Habbouche, Jhony / Diefenderfer, Stacey D.	Using mechanistic–empirical based analysis to evaluate rutting performance thresholds for balanced mix design tests	132762
Dinç-Şengönül, Burcu / Yuzer, Nabi / Boylu, Selen / Erdil, Kemal / Güdendede, Yahya Aykut	Utilization of waste animal blood as an additive in hydraulic lime-based mortars	132909
Yang, Jianhua / Zhang, Zhengqi / Xue, Jinshun / Lei, Jun'an / Liu, Yong / Wang, Yuanyuan / Fang, Ying	Variation and mechanism of asphalt-aggregate interface features under ultraviolet aging based on meso- and micro-observations	132830
Moula, Soufien / Ben Fraj, Amor / Wattez, Thomas / Bouasker, Marwen / Bel Hadj Ali, Nizar	The very early-age behaviour of Ultra-High Performance Concrete containing ground granulated blast furnace slag	132630
Tan, Zhifei / Jelagin, Denis / Fadil, Hassan / Leng, Zhen / Li, Rui / Jiang, Jiwang / Cao, Peng	Virtual-specimen modeling of aggregate contact effects on asphalt concrete	132638
Trussell, Nicholas / Øystein Nordtug, Per / Asadi, Iman / Kristoffersen, Martin / Jacobsen, Stefan	Water transport in cracks controlled by digital image correlation in wet sprayed concrete with and without an EVA based co-polymer admixture	132423

About this
data sheet
IssueID
70425
Published on:
03/09/2023
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.