Construction and Building Materials - November 2023

Published:	November 2023

Articles in this Issue

Author(s)	Title	Page(s)
van Overmeir, A. L. / Šavija, B. / Bos, F. P. / Schlangen, E.	3D printable strain hardening cementitious composites (3DP-SHCC), tailoring fresh and hardened state properties	132924
Kim, Jong-Won / Mun, Ju-Hyun / Kim, Sanghee / Yang, Keun-Hyeok / Sim, Jae-Il / Jung, Yeon-Back / Lee, Dong-Eun	Actual NOX and SOX removal rates in the atmospheric environment of concrete permeable blocks containing TiO2 powders, coconut shell powders, and zeolite beads	133032
Zhao, Wenhui / Geng, Jiuguang / Chen, Mingyuan / Li, Xu / Niu, Yanhui	Analysis of SBS content quantitative determination and rheological properties of aged modified asphalt binder	133024
Roshan, Mohammad Jawed / Abedi, Mohammadmahdi / Correia, António Gomes / Fangueiro, Raúl	Application of self-sensing cement-stabilized sand for damage detection	133080
Sun, Yiren / Lv, Bin / Gong, Hongren / Xu, Hui / Wang, Weiying / Xu, Bin / Chen, Jingyun	Approach for accurately characterizing nonlinear viscoelastic and nonrecoverable properties of asphalt binders based on MSCR test	133098
Quadri, Ajibola Ibrahim / Fujiyama, Chikako	Assessment of repaired reinforced concrete dapped-end beams exhibiting bond deterioration under static and cyclic loading	133070
Xiang, Zhe / Zhang, Nong / Pan, Dongjiang / Xie, Zhengzheng	Basic consolidation and impermeability laws for nano-silica-sol grouted mudstone	133121
Dubuit, Julie / Laurens, Stéphane / Bertron, Alexandra / Garcia, David / Etcheverry, Luc / Deby, Fabrice / Erable, Benjamin	Biogalvanic cathodic protection of reinforced concrete structures in marine environments	133180
Reboul, N. / Saidi, M. / Mualla, S. / Homoro, O. / Amziane, S.	Bond behaviour of Fibre Reinforced Polymers applied on masonry substrate: Analysis based on acoustic emission, digital image correlation and analytical modelling	132921
Hu, Xinyu / Xue, Wenyuan / Xue, Weichen / Jiang, Jiafei	Bond strength of sand-coated deformed GFRP bars in UHPC, HPC, and NC	133175
Zhu, Jinggao / Ren, Xiaodan / Cervera, Miguel	Buildability modeling of 3D-printed concrete including printing deviation: A stochastic analysis	133076
Zheng, Yubin / Zhou, Changdong / Zhang, Peng / Wang, Yuqian	Comparison of mechanical performance uncertainties for sustainable high-performance bamboo/wood composites	132740
Huang, Guodong / Zhang, Xukang / Liu, Meng / Fang, Bing / Wang, Chengcheng / Mi, Huafeng	Compatibility of sodium hydroxide, sodium silicate and calcium-enriched additives in alkali-activated materials: From the perspectives of flowability, strength and microstructure	133102
Shi, Xiaoshuang / Feng, Ying / Zhang, Yuhao / Su, Yanpeng	A comprehensive investigation on sulphate resistance of geopolymer recycled concrete: Macro and micro properties	133052
Buchner, Thomas / Königsberger, Markus / Gaggl, Wolfgang / Früh, Gottfried / Kiefer, Thomas / Füssl, Josef	A continuum micromechanics model challenged to predict thermo-mechanical properties of 18 different clay bricks and sensitivity analysis revealing effects of compositional and microstructural features	132601
Zhong, Haobai / Huang, Weidong / Lin, Peng / Zhou, Lu / Lv, Quan	Critical considerations and effective assessment of extraction and recovery processes of RAP	133039
Alexandre, V. J. F. / Boshoff, W. P. / Combrinck, R.	Damage evaluation and mechanisms of textile reinforced concrete during telescopic failure	133055
Pang, Yuyang / Tang, Qun / Yang, Lin / Wang, Qiang / Li, Haofei / Lv, Weiqian / Wang, Runxin	Development of a hydrophobic cement mortar with controllable strength: Preparation and micro-mechanism analysis	133216
Hu, Shi / Cai, Haibing / Liu, Qing / Yuan, Zhu / Han, Chenyue / Ding, Zude / Zhang, Kai	Development of a new type sprayed high ductility concrete (SHDC) and uniaxial compression test of rock-SHDC combined body	132989
Vassaux, Sabine / Havel, Marine / Lesueur, Didier / Van Rompu, Julien / Geisler, Flavien / Pouget, Simon	Development of a novel infrared methodology to assess the degree of blending in cold and warm recycled asphalt mixtures incorporating a bituminous or bio-based virgin binder	133103
Kumar, Dileep / Alam, Morshed / Sanjayan, Jay G.	Development of sustainable heat resistive and storage panels for building envelope: An experimental and numerical study	133093
Yang, Liu / Zhu, Zhiduo / Sun, He / Huo, Wangwen / Zhang, Jie / Wan, Yu / Zhang, Chen	Durability of waste concrete powder-based geopolymer reclaimed concrete under carbonization and freeze–thaw cycles	133155
Nikookar, Mohammad / Brake, Nicholas A. / Asli, Hossein Hariri / Adesina, Mubarak / Rahman, Ashiqur / Selvaratnam, Thinesh / Bradley, Robert K.	Durability, workability, and setting time of cementitious systems containing chloride-rich oil and gas production wastewater	132862
Wei, Kuiling / Cao, Xuejuan / Wu, Yan / Cheng, Zuoyang / Tang, Boming / Shan, Bailin	Dynamic chemistry approach for self-healing of polymer-modified asphalt: A state-of-the-art review	133128
Li, Qing / Wang, Jinbang / Zhou, Zonghui / Du, Peng / Zhang, Xiuzhi	Effect of BaCl2 on the hydration properties of ultrahigh performance geopolymer concrete	133074
Zhuang, Ronghua / Yu, Jianying / Zhang, Tianwei / Zeng, Shangheng / Ma, Yuchao / Liu, Quantao / Wang, Ruiyang	Effect of chelator on compressive strength and microstructure of CO2 curing cement paste	133182
Zhou, Chunheng / Cao, Jiazhang / Zhang, Zihua / Zhu, Yaohong	Effect of fiber reinforcement on bond behavior between coral aggregate concrete and GFRP bar	133201
Alshahrani, Abdullah / Kulasegaram, Sivakumar	Effect of fibre diameter and tensile strength on the mechanical, fracture, and fibre distribution properties of eco-friendly high-strength self-compacting concrete	133161
Rong, Zhidan / Jiao, Maopeng / Zhang, Jiaqi	Effect of modified nano-SiO2 on properties and microstructure of the high-performance cementitious composites	133063
Zhang, Rui / Wang, Jianyun	Effect of regulating urease activity on the properties of bio-CaCO3 precipitated on recycled aggregates	133119
Bhandari, Ishan / Kumar, Rajesh	Effect of silica fume and PCE-HPMC on LC3 mortar: Microstructure, statistical optimization and life cycle Assessment	133073
Biricik, Öznur / Aytekin, Burcu / Mardani, Ali	Effect of waste binder material usage rate on thixotropic behaviour of cementitious systems	133197
Chen, Peiyuan / Shen, Xin / Li, Shangkun / Wang, Jialai	Effect of wastewater generated from fluoroacid etching of cenospheres on the performance of alkali-activated slag	133163
Zhang, Huasheng / Zhou, Guoyin / Zhang, Qingsong / Zhang, Shengtao / Pei, Yan / Kong, Xiaoguang / Zhang, Mi / Skoczylas, Frédéric	Effects of emulsified asphalt on the rheological behaviors of magnesium phosphate cement	133205
Cheng, Xiangyi / Liu, Shichang / Wen, Jing / Feng, Taotao / Chen, Guangming / Tan, Yongshan	Effects of recycled mortar powder on the properties and microstructure of magnesium potassium phosphate cement	133144
Yao, Yan / Xi, Jingyu / Wang, Junfeng / Li, Wanzhao / Shi, Jiangtao / Yang, Zhangqi / Wang, Xinzhou	The effects of surface modification by using phytic acid-based hybrid complexes on the interfacial properties of heat-treated wood	133118
Wang, Meng / Zhang, Chunyu / Jiang, Ping / Yan, Jia / Liu, Rentai / Chen, Mengjun	Effects of temperature and bleeding on rheology of cement paste	133085
Ma, Qiang / Li, Yubiao / Li, Yang / Liu, Yuanyuan / Lei, Shaomin	Enhanced mortar strength and resistance to seawater degradation in the presence of calcined coal-series kaolin	132986
Liu, Gang / Zhang, Runxia / Gu, Zhaolin / Wang, Jianyun	Evaluation of calcined coal slime in binary and ternary ordinary portland cement composites: The role of calcination temperature	133091
John, Nithin Jacob / Khan, Imdadullah / Patel, Anjan	Evaluation of the crushing characteristics of industrial waste aggregates as construction materials	133111
He, Bianyang / Li, Yanfang / Chen, Junfeng / Fu, Mingjie / Zhang, Xinying / Li, Weishuang / Yu, Jianying / Zhu, Lei	Evaluation of UV aging resistance of bitumen containing lignosulfonate grafted layered double hydroxides	133026
Bao, Yingwei / Lu, Weidong / Yue, Kong / Lu, Binhui / Dai, Changlu / Qiu, Guorong	Experimental and nonlinear-analytical studies of cross-laminated-timber concrete composite floors with interface shear resistance enhancement of plate-end	133042
Li, Lingling / Xu, Fei / Tang, Haida / Wang, Junsong / Meng, Qinglin	Experimental and theoretical study on cooling performance of membrane roof with circulated water film	133115
Fan, Ran / Gong, Hangli / Luo, Yi / Zhang, Jinrui / Li, Xinping	Experimental characterization of dynamic strength and failure behavior of saturated reef limestone concrete under biaxial stress constraint	133116
Sun, Hang / Luo, Liang / Yuan, Huang / Li, Xi	Experimental evaluation of mechanical properties and microstructure for recycled aggregate concrete collaboratively modified with nano-silica and mixed fibers	133125
Xu, Ke / Deng, Peng / Huang, Pin / Xiao, Alin / Guo, Shuaicheng	Experimental investigation on the mechanical properties of concrete utilizing pre-coated Brick-Concrete recycled coarse aggregates	133113
He, Jingran / Hong, Junjie / Gao, Ruofan / Liu, Feng / Li, Lijuan	Experimental study on permeability of spun high strength concrete material during mechanical loading	133034
Yang, Jusung / Moon, Juhyuk	Experimental study on tracing the initial water–to-cement ratio of hardened concrete using petrography analysis	133199
Oubaha, Said / Taha, Yassine / Loutou, Mohamed / Oualid Mghazli, Mohamed / Benzaazoua, Mostafa / Hakkou, Rachid	Fired brick production using phosphogypsum and phosphate mining waste	133149
Alarrak, Rashed / Jeon, Byeonguk / Brand, Alexander S.	Fracture properties of extruded fiber-reinforced mortar with preferentially aligned fibers	133022
Bai, Yueji / Arulrajah, Arul / Horpibulsuk, Suksun / Chu, Jian	Gasified olive stone biochar as a green construction fill material	133003
Kaoutari, Taoufiq / Louahlia, Hasna / Schaetzel, Pierre / Lepinasse, Eric / Boutouil, Mohamed / Goodhew, Steve / Streif, François	Hygric properties and adsorption characteristics of simple and dual coblayers of bio-sourced building materials	133157
Veselý, Jakub / Šmilauer, Vít	Hygro-thermo-mechanical model for concrete pavement from an early age to a long-term performance	133068
Abomo, Therese / Kaze, Rodrigue Cyriaque / Cengiz, Özgür / Alomayri, Thamer / Pefouo Wilson, Tchi / Robert, Medjo Eko / Naghizadeh, Abdolhossein / Kamseu, Elie	Impact of the depth of a lateritic profile on the physicochemical, mechanical and microstructural properties of geopolymer binders	133138
Hu, Zhongjing / Wang, Qingbiao / Lv, Hao / Li, Kesheng / Zhang, Jinpeng / Ma, Yiming	Improved mechanical and macro-microscopic characteristics of shotcrete by incorporating hybrid alkali-resistant glass fibers	133131
Liu, Qiong / Tang, Huilin / Chen, Kailun / Sun, Chang / Li, Wengui / Jiao, Sufang / Tam, Vivian W. Y.	Improving industrial drying process of recycled fine aggregates as a means of carbonation to improve the mechanical properties and plastic shrinkage of self-leveling mortar	133001
Fu, Zhipeng / Wang, Xianfeng / Song, Qiao / Jiang, Ting / Li, Dawang / Xing, Feng	In-situ expansion compensation and repetitive self-healing of concrete using difunctional artificial aggregates	133140
Kontić, Ana / Vasconcelos, Graça / Briceño Melendez, Carolina / Azenha, Miguel / Sokolović, Neda	‘‘ Influence of air entrainers on the properties of hydrated lime mortars’’	132968
Yang, Jianhui / Wang, Li / Yang, Dongbo / Wang, Qinting	Influence of concrete and unbonded ratio on RC beams	133086
Lyu, Xin / Ahmed, Tanvir / Elchalakani, Mohamed / Yang, Bo / Youssf, Osama	Influence of crumbed rubber inclusion on spalling, microstructure, and mechanical behaviour of UHPC exposed to elevated temperatures	133174
Chen, Yidong / Zhang, Yunsheng / Zhang, Yu / Pang, Bo / Zhang, Wenhua / Liu, Cheng / Liu, Zhiyong / Wang, Dafu / Sun, Guowen	Influence of gradation on extrusion-based 3D printing concrete with coarse aggregate	133135
Liu, Dengkai / Chen, Hongniao / Su, Ray Kai Leung / Chen, Lijie / Liang, Kun	Influence of initial crack length on fracture properties of limestone using DIC technique	133020
Fan, L. F. / Chen, D. K. / Zhong, W. L. / Zhang, Y. H.	Influence of interface inclination angle and load impact velocity on dynamic splitting tensile behavior and dissipated energy of geopolymer-concrete composites	133112
Deng, Si-jie / Fan, Jie / Li, Geng-Ying / Zhang, Min / Li, Min	Influence of styrene-acrylic emulsion additions on the electrical and self-sensing properties of CNT cementitious composites	133172
Shahzad, Qamar / Li, Fang-Yuan	An innovative method for buildability assessment of 3d printed concrete at early-ages	133167
Wei, Chao / Yan, Yutong / Zhang, Zengqi / Liu, Xiaoming / Wu, Pengfei / Gu, Jiarui / Han, Fanghui / Ren, Qiang	Insight into the synergic effects of circulating fluidized bed fly ash, red mud and blast furnace slag in preparation of ultrahigh-performance concrete: Reaction mechanism and performance optimization	133120
Zhao, Jianjun / Li, Shuang / Zhang, Zicheng	Integrated composite wall with geopolymer permanent insulation formwork: Interface bonding behavior and mechanism	133110
Jiang, Ping / Wang, Zhichao / Wang, Wei / Li, Na / Yu, Yanfei / Li, Cuihong / Wu, Erlu / Pu, ShaoYun	Interfacial strength characteristics between modified iron tailings and profiled fibers under dry–wet and freeze–thaw environments	133016
Vyas, Abhilash / Wang, Yudi / Hajj, Ramez / Jahns, Ekkehard	Investigation of factors affecting modified asphalt binder development and performance using the poker chip test	133037
Shi, Peng / Falliano, Devid / Marano, Giuseppe Carlo / Huang, Yujie / Chen, Zhuorui / He, Bingjian	Investigation of the ionic curing effect and performance of modified nano-montmorillonite on river sludge pastes: Influence of sludge substitution and MNMt dosage	133183
Gao, Meng / Dai, Jun / Jing, Hongjun / Ye, Wanjun / Sesay, Taiwo	Investigation of the performance of cement-stabilized magnesium slag as a road base material	133065
Teng, Xiaodan / Lu, Chenyu / Li, Cong / Chen, Zheng	Investigation on shear mechanical behavior of the interface between sulphoaluminate cement (SAC)-ECC and existing concrete	133184
Zhao, Li-Cai / Xu, Liang / Yazdi, Amin	Laboratory evaluation of the effect of waste materials on mechanical properties of asphalt binder and mixture containing combined natural binder and waste polymer	132995
Rahman, Mohammad / Harvey, John / Buscheck, Jeffrey / Brotschi, Julian / Mateos, Angel / Jones, David / Pourtahmasb, Saeed	Laboratory performance and construction challenges for plant produced asphalt mixes containing RAP and RAS	133082
Xu, Jinghan / Zheng, Mulian / Ding, Xiaoyan / Qiao, Ruizhe / Zhang, Wenwu	Laboratory proportion design and performance evaluation of Fiber-Reinforced rubber asphalt chip seal based on multiple properties enhancement	133204
Al-Subari, By Lutf / Hilal, Adnan / Ekinci, Abdullah	Life cycle assessment of soil stabilization using cement and waste additives	133045
Chen, Leilei / Zhao, Xinyuan / Qian, Zhendong / Li, Xuehui	Mechanical behavior of asphalt pavement on steel-concrete composite beam bridge under temperature-load coupling	133099
Farag Gaddafi, Adel Kassem / Alengaram, U. Johnson / Bunnori, Norazura Muhamad / Ibrahim Muhammad, S. I. / Ibrahim, Shaliza / Sumesh, Mathialagan	Mechanical properties, flexural behaviour, and ductility characteristics of fibre-reinforced geopolymer mortar	133109
Jia, Ruiquan / Wang, Qiang / Luo, Ting	Mechanisms and differences between sodium and magnesium sulfate attacks on alkali-activated phosphorus slag	133117
Wang, Xiaowei / Ren, Jiaxing / Hu, Xinyu / Li, Qiang / Ji, Xiaoping	Meso-scale adhesive/cohesive failure behaviors of porous asphalt mixtures considering random inhomogeneous distribution of binder	133097
Peng, Zhangzhen / Wang, Qiao / Zhou, Wei / Chang, Xiaolin / Yue, Qiang / Huang, Chengbin	Meso-scale simulation of thermal fracture in concrete based on the coupled thermal–mechanical phase-field model	133095
Ai, Xinman / Pei, Zhongshi / Xu, Meng / Fan, Lulu / Tu, Liangliang / Yang, Jianhong / Feng, Decheng / Yi, Junyan	Micromechanical behavior of cement-treated base materials incorporating recycled crushed aggregates arising from C&D waste powder based on DEM	133100
Zhao, Zili / Jiang, Jiwang / Leng, Zhen / Ni, Fujian	Micropore structure characterization of the bitumen emulsion-based cold in-place recycling mixture considering water gradient migration condition through multiple XCT scanning	133084
Li, Yubo / Cheng, Lu / Lei, Wuyi / Su, Ying / Huang, Tao / Zhu, Yuxue / Mei, Can / He, Xingyang	Microstructures and mechanical property of post-fire grouting sleeve connections considering concrete cover	132578
Du, Junjie / Xiao, Huigang / Zhang, Fengling / Liu, Min	The micro–mechanical mechanism of multiple cracking behavior induced by interface strengthening for UHPC	133006
Zhang, Junhui / Shi, Xiuzhi / Guan, Weiming / Liu, Ying / Xia, Xiaocheng / Yuan, Jingjing / Chen, Xin	Mineralization performance and crystal characteristics of microbial induced carbonate precipitation in lead–zinc tailings under multiple factors	133081
Wadee, Ahmad / Achanta, Pallavi / Walker, Pete / McCullen, Nick / Ferrándiz-Mas, Veronica	Novel gypsum based plasters with phase change material impregnated lightweight aggregates for energy efficient retrofitting	133159
Su, Yan-Li / Wu, Chang / Shang, Jia-Qi / Zhang, Pu / Sheikh, Shamim Ahmed	Numerical and theoretical studies for the shear behavior of CFRP plate-ECC-concrete composite interface	133156
Ulus, Hasan / Burak Kaybal, Halil	Out-of-plane static loading performance of lightweight aluminum/composite FML structures for retrofitting applications: Effectiveness of bonded, bolted and hybrid bonded/bolted joining techniques under hydrothermal aging environment	133124
Wang, Chenman / Kayali, Obada / Liow, Jong-leng / Troitzsch, Ulrike	Participation and disturbance of superplasticisers in early-stage reaction of class F fly ash-based geopolymer	133176
Liu, Jun / Niu, Renjie / Hu, Junjie / Ren, Yuanrui / Zhang, Weizhuo / Liu, Guang / Li, Zhenlin / Xing, Feng / Ren, Jie	The performance and microstructure of alkali-activated artificial aggregates prepared from municipal solid waste incineration bottom ash	133012
Zheng, Yongfeng / Xie, Ming / Liu, Zetian / Zhang, Yu / Ding, Xin	Performance of high strength steel bar splice with novel grouted deformed sleeve under tensile load	133092
Fang, Yu / Yao, Zhishu / Xu, Yongjie / Li, Xinwei / Liu, Xiaohu / Huang, Xianwen	Permeability evolution and pore characteristics of reactive powder concrete of drilling shaft with initial salt erosion damage	133141
Thakur, Mohmad M. / Enright, Sean / Hurley, Ryan C.	Phase segmentation in X-ray CT images of concrete with implications for mesoscale modeling	133033
Wu, Fengnian / Bi, Haifeng / Lin, Haiqian / Wang, Xuping / Luan, Congqi / Cheng, Xin / Wang, Shoude / Huang, Yongbo	Physical and chemical chloride binding characteristics of the hydration products for phosphoaluminate cement	133044
Kiki, Gratien / Nshimiyimana, Philbert / Kouchadé, Clément / Messan, Adamah / Houngan, Aristide / André, Philippe	Physico–mechanical and durability performances of compressed earth blocks incorporating quackgrass straw: An alternative to fired clay	133064
Zhang, Yunhua / Zhang, Mengli / Huang, Dafan	Polycarboxylate superplasticizer as strengthening additive in carbonated artificial steel slag aggregate	133136
Li, Jingjing / Wang, Shuping / Zhong, Jingxiong / Xin, Yuntao / Lv, Xuewei / Zeng, Lu / Zeng, Guangwu	Properties and microstructure development of alkali- activated coal bottom ash and titanium- extraction tailing slag binder	133087
Carvalho, Aldo Ribeiro de / Calderón-Morales, Bianca Rafaela da Silva / Borba Júnior, José Carlos / Oliveira, Thaís Mayra de / Brigolini Silva, Guilherme Jorge	Proposition of geopolymers obtained through the acid activation of iron ore tailings with phosphoric acid	133078
Zhong, Zhen / Tao, Pan / Jin, Huijun / Lou, Rong / Cui, Yuhang / Liu, Jie	A quantitative investigation on the fragmentation performance of SCDA in cracking steel fiber reinforced concrete	133133
Yang, Shizhao / Wang, Xujiang / Hu, Zhijuan / Li, Jingwei / Yao, Xingliang / Zhang, Chao / Wu, Changliang / Zhang, Jiazheng / Wang, Wenlong	Recent advances in sustainable lightweight foamed concrete incorporating recycled waste and byproducts: A review	133083
Bocci, Edoardo / Prosperi, Emiliano	Recyclability of reclaimed asphalt rubber pavement	133040
Covilla-Varela, Elvis / Turbay, Emilio / Polo-Mendoza, Rodrigo / Martinez-Arguelles, Gilberto / Cantero-Durango, Julio	Recycled Concrete Aggregates (RCA)-based asphalt mixtures: A performance-related evaluation with sustainability-criteria verification	133203
Li, Yan / Zou, Zhengbo / Zhang, Jiupeng / He, Yinzhang / Huang, Guojing / Li, Junbo	Refined evaluation methods for preventive maintenance of project-level asphalt pavement based on confusion-regression model	133105
Li, Xiaoya / Jin, Liu / Du, Xiuli / Muciaccia, Giovanni	Refined simulation of bond-slip behavior between ribbed steel and concrete: Effects of initial stress and temperature	133166
Zhu, Xiangchen / Zhang, Yunsheng / Liu, Zhiyong / Qiao, Hongxia / Ye, Fukai / Lei, Zhang	Research on carbon emission reduction of manufactured sand concrete based on compressive strength	133101
Jiang, Wei / Xie, Youjun / Ma, Kunlin / Wu, Junqing / Long, Guangcheng	Research on two-dimensional digital characterization of crushed stone aggregates in the SCC filling layer of the CRTS III slab ballastless track	133132
Zhang, Zhihai / Xiao, Hong / Wang, Yang / Chi, Yihao / Nadakatti, Mahantesh M.	Response analysis and effect evaluation of dynamic stabilization for ballasted track	133154
Zokaei, Shahin / Siad, Hocine / Lachemi, Mohamed / Mahmoodi, Obaid / Şahmaran, Mustafa	Self-healing capability of engineered cementitious composites with calcium aluminate cement	133051
Zhao, Zhongzhong / Li, Hui / Liu, Wenhuan / Wan, Yongfeng / Huang, Wen	Solidification of heavy metals in lead smelting slag-based cementitious materials via the hybrid binder method	133129
Christoforidou, Angeliki / Verleg, Ron / Pavlović, Marko	Static, fatigue and hygroscopic performance of steel-reinforced resins under various temperatures	133079
Huang, Dongming / Liu, Zhenzhen / Ma, Wentao / Lu, Yiyan / Li, Shan	Steel fiber-reinforced recycled aggregate concrete-filled GFRP tube columns: Axial compression performance	133143
Góra, Jacek / Piasta, Wojciech	Strains of high-performance and ordinary concretes depending on the cement paste volume and the w/c ratio	133134
Rahmat, Mohamad Nidzam / Saleh, Ani Maslina	Strength and environmental evaluation of building bricks using industrial waste for liveable environments	132864
Huang, Kai / Cai, Guojun / Yan, Chao / Yu, Jinhuang / Tang, Liping / Zhang, Jun	Strength and microstructure characteristics of red-bed weathered residual soil stabilized by Titanium Gypsum-Cement	133071
Kojima, Kaishi / Kim, JiHoon / Kitagaki, Ryoma / Hama, Yukio	Study of microstructural changes in blast-furnace cement hardened by repeated dry and wet curing at high temperatures	132861
Moreno-Maroto, José Manuel / Cobo-Ceacero, Carlos Javier / Martínez-Rodríguez, Ana M. / Conde-Sánchez, Antonio / González-Corrochano, Beatriz / Alonso-Azcárate, Jacinto / Uceda-Rodríguez, Manuel / López, Ana B. / Martínez-García, Carmen / Cotes-Palomino, Teresa	Study of the synergistic impact of Fe3O4, Na2CO3 and organic C on kaolin-based lightweight aggregates by a DOE (Mixture Experiments) approach	133152
Zhang, Zhenhua / Cui, Wentian / Liu, Zhidan / Liu, Wu / Xi, Banglu / Chen, Mingliang	Study on the cracking mechanism of strongly weathered purple mudstone under wetting and drying effect through experiments and molecular dynamics simulation	133104
Pan, Kaiming / Wu, Zhimin / Yu, Rena C. / Zhang, Xiaoxin	Study on the dynamic fracturing characteristics of aggregate-mortar interface under various loading rates using DIC	133069
Duan, Dedan / Song, Huiping / Liu, Fanyu / Liu, Qian / Fan, Zhenlian / Cheng, Huaigang / Cheng, Fangqin	Study on the influence mechanism of flue gas desulphurisation gypsum on solid waste-based geopolymer grouting materials	133137
Marji, Mohammad Fatehi / Yousofian, Hatef / Soltanian, Hamid / Pourmazaheri, Yaser / Abdollahipour, Abolfazl	Superior crack propagation inhibitory effectiveness of MWCNT reinforced SBS toward improving oil/gas well cement integrity	133171
Shen, Zihao / Liu, Wenguang / Zhang, Qiang	Tensile behavior of high-performance interlayer hybrid composites of polypropylene and glass fiber for civil engineering	133017
Zhang, Yu / Gao, Danying	Tensile property analysis of carbon/glass hybrid fibers-reinforced graphene-modified polymer bars	133178
Askouni, Paraskevi D. / Polydoropoulos, Spyridon / Papanicolaou, Catherine G.	Textile Reinforced Mortar/masonry joints under reverse cyclic in-plane shear	133122
Khademi, Pooria / Mousavi, Mohsen / Dackermann, Ulrike / Gandomi, Amir H.	Time–frequency analysis of ultrasonic signals for quality assessment of bonded concrete	133062
Bandeira Barros, Laís / Knockaert, Mirjam / Tenório Filho, José Roberto	Towards a more sustainable construction industry: Bridging the gap between technical progress and commercialization of self-healing concrete	133094
Hao, Zhexin / Lu, Cong	User-friendly end-to-end fiber identification for fiber-reinforced cementitious composites (FRCC) through deep learning	133169
Han, Xu / Zhang, Peng / Zheng, Yuanxun / Wang, Juan	Utilization of municipal solid waste incineration fly ash with coal fly ash/metakaolin for geopolymer composites preparation	133060
Guo, Chuanchuan / Wang, Ru	Utilizing lithium slag to improve the physical-chemical properties of alkali-activated metakaolin-slag pastes: Cost and energy analysis	133164
Zhang, Junran / Liu, Jiahao / Cheng, Yan / Jiang, Tong / Sun, De'an / Saberian, Mohammad	Water-retention behaviour and microscopic analysis of two biopolymer-improved sandy soils	133202
Hoy, Menglim / Tran, Ngoc Quynh / Suddeepong, Apichat / Horpibulsuk, Suksun / Buritatum, Apinun / Yaowarat, Teerasak / Arulrajah, Arul	Wetting-drying durability performance of cement-stabilized recycled materials and lateritic soil using natural rubber latex	133108
al-Bashiti, Mohammad Khaled / Naser, M. Z.	What can we learn from over 1000 tests on fire-induced spalling of concrete? A statistical investigation of critical factors and unexplored research space	133200

About this
data sheet
IssueID
70415
Published on:
01/09/2023
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.