Construction and Building Materials - novembre 2023

Publié:	novembre 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
van Overmeir, A. L. / Šavija, B. / Bos, F. P. / Schlangen, E.	3D printable strain hardening cementitious composites (3DP-SHCC), tailoring fresh and hardened state properties	132924
Kim, Jong-Won / Mun, Ju-Hyun / Kim, Sanghee / Yang, Keun-Hyeok / Sim, Jae-Il / Jung, Yeon-Back / Lee, Dong-Eun	Actual NOX and SOX removal rates in the atmospheric environment of concrete permeable blocks containing TiO2 powders, coconut shell powders, and zeolite beads	133032
Zhao, Wenhui / Geng, Jiuguang / Chen, Mingyuan / Li, Xu / Niu, Yanhui	Analysis of SBS content quantitative determination and rheological properties of aged modified asphalt binder	133024
Roshan, Mohammad Jawed / Abedi, Mohammadmahdi / Correia, António Gomes / Fangueiro, Raúl	Application of self-sensing cement-stabilized sand for damage detection	133080
Sun, Yiren / Lv, Bin / Gong, Hongren / Xu, Hui / Wang, Weiying / Xu, Bin / Chen, Jingyun	Approach for accurately characterizing nonlinear viscoelastic and nonrecoverable properties of asphalt binders based on MSCR test	133098
Quadri, Ajibola Ibrahim / Fujiyama, Chikako	Assessment of repaired reinforced concrete dapped-end beams exhibiting bond deterioration under static and cyclic loading	133070
Xiang, Zhe / Zhang, Nong / Pan, Dongjiang / Xie, Zhengzheng	Basic consolidation and impermeability laws for nano-silica-sol grouted mudstone	133121
Dubuit, Julie / Laurens, Stéphane / Bertron, Alexandra / Garcia, David / Etcheverry, Luc / Deby, Fabrice / Erable, Benjamin	Biogalvanic cathodic protection of reinforced concrete structures in marine environments	133180
Reboul, N. / Saidi, M. / Mualla, S. / Homoro, O. / Amziane, S.	Bond behaviour of Fibre Reinforced Polymers applied on masonry substrate: Analysis based on acoustic emission, digital image correlation and analytical modelling	132921
Hu, Xinyu / Xue, Wenyuan / Xue, Weichen / Jiang, Jiafei	Bond strength of sand-coated deformed GFRP bars in UHPC, HPC, and NC	133175
Zhu, Jinggao / Ren, Xiaodan / Cervera, Miguel	Buildability modeling of 3D-printed concrete including printing deviation: A stochastic analysis	133076
Zheng, Yubin / Zhou, Changdong / Zhang, Peng / Wang, Yuqian	Comparison of mechanical performance uncertainties for sustainable high-performance bamboo/wood composites	132740
Huang, Guodong / Zhang, Xukang / Liu, Meng / Fang, Bing / Wang, Chengcheng / Mi, Huafeng	Compatibility of sodium hydroxide, sodium silicate and calcium-enriched additives in alkali-activated materials: From the perspectives of flowability, strength and microstructure	133102
Shi, Xiaoshuang / Feng, Ying / Zhang, Yuhao / Su, Yanpeng	A comprehensive investigation on sulphate resistance of geopolymer recycled concrete: Macro and micro properties	133052
Buchner, Thomas / Königsberger, Markus / Gaggl, Wolfgang / Früh, Gottfried / Kiefer, Thomas / Füssl, Josef	A continuum micromechanics model challenged to predict thermo-mechanical properties of 18 different clay bricks and sensitivity analysis revealing effects of compositional and microstructural features	132601
Zhong, Haobai / Huang, Weidong / Lin, Peng / Zhou, Lu / Lv, Quan	Critical considerations and effective assessment of extraction and recovery processes of RAP	133039
Alexandre, V. J. F. / Boshoff, W. P. / Combrinck, R.	Damage evaluation and mechanisms of textile reinforced concrete during telescopic failure	133055
Pang, Yuyang / Tang, Qun / Yang, Lin / Wang, Qiang / Li, Haofei / Lv, Weiqian / Wang, Runxin	Development of a hydrophobic cement mortar with controllable strength: Preparation and micro-mechanism analysis	133216
Hu, Shi / Cai, Haibing / Liu, Qing / Yuan, Zhu / Han, Chenyue / Ding, Zude / Zhang, Kai	Development of a new type sprayed high ductility concrete (SHDC) and uniaxial compression test of rock-SHDC combined body	132989
Vassaux, Sabine / Havel, Marine / Lesueur, Didier / Van Rompu, Julien / Geisler, Flavien / Pouget, Simon	Development of a novel infrared methodology to assess the degree of blending in cold and warm recycled asphalt mixtures incorporating a bituminous or bio-based virgin binder	133103
Kumar, Dileep / Alam, Morshed / Sanjayan, Jay G.	Development of sustainable heat resistive and storage panels for building envelope: An experimental and numerical study	133093
Yang, Liu / Zhu, Zhiduo / Sun, He / Huo, Wangwen / Zhang, Jie / Wan, Yu / Zhang, Chen	Durability of waste concrete powder-based geopolymer reclaimed concrete under carbonization and freeze–thaw cycles	133155
Nikookar, Mohammad / Brake, Nicholas A. / Asli, Hossein Hariri / Adesina, Mubarak / Rahman, Ashiqur / Selvaratnam, Thinesh / Bradley, Robert K.	Durability, workability, and setting time of cementitious systems containing chloride-rich oil and gas production wastewater	132862
Wei, Kuiling / Cao, Xuejuan / Wu, Yan / Cheng, Zuoyang / Tang, Boming / Shan, Bailin	Dynamic chemistry approach for self-healing of polymer-modified asphalt: A state-of-the-art review	133128
Li, Qing / Wang, Jinbang / Zhou, Zonghui / Du, Peng / Zhang, Xiuzhi	Effect of BaCl2 on the hydration properties of ultrahigh performance geopolymer concrete	133074
Zhuang, Ronghua / Yu, Jianying / Zhang, Tianwei / Zeng, Shangheng / Ma, Yuchao / Liu, Quantao / Wang, Ruiyang	Effect of chelator on compressive strength and microstructure of CO2 curing cement paste	133182
Zhou, Chunheng / Cao, Jiazhang / Zhang, Zihua / Zhu, Yaohong	Effect of fiber reinforcement on bond behavior between coral aggregate concrete and GFRP bar	133201
Alshahrani, Abdullah / Kulasegaram, Sivakumar	Effect of fibre diameter and tensile strength on the mechanical, fracture, and fibre distribution properties of eco-friendly high-strength self-compacting concrete	133161
Rong, Zhidan / Jiao, Maopeng / Zhang, Jiaqi	Effect of modified nano-SiO2 on properties and microstructure of the high-performance cementitious composites	133063
Zhang, Rui / Wang, Jianyun	Effect of regulating urease activity on the properties of bio-CaCO3 precipitated on recycled aggregates	133119
Bhandari, Ishan / Kumar, Rajesh	Effect of silica fume and PCE-HPMC on LC3 mortar: Microstructure, statistical optimization and life cycle Assessment	133073
Biricik, Öznur / Aytekin, Burcu / Mardani, Ali	Effect of waste binder material usage rate on thixotropic behaviour of cementitious systems	133197
Chen, Peiyuan / Shen, Xin / Li, Shangkun / Wang, Jialai	Effect of wastewater generated from fluoroacid etching of cenospheres on the performance of alkali-activated slag	133163
Zhang, Huasheng / Zhou, Guoyin / Zhang, Qingsong / Zhang, Shengtao / Pei, Yan / Kong, Xiaoguang / Zhang, Mi / Skoczylas, Frédéric	Effects of emulsified asphalt on the rheological behaviors of magnesium phosphate cement	133205
Cheng, Xiangyi / Liu, Shichang / Wen, Jing / Feng, Taotao / Chen, Guangming / Tan, Yongshan	Effects of recycled mortar powder on the properties and microstructure of magnesium potassium phosphate cement	133144
Yao, Yan / Xi, Jingyu / Wang, Junfeng / Li, Wanzhao / Shi, Jiangtao / Yang, Zhangqi / Wang, Xinzhou	The effects of surface modification by using phytic acid-based hybrid complexes on the interfacial properties of heat-treated wood	133118
Wang, Meng / Zhang, Chunyu / Jiang, Ping / Yan, Jia / Liu, Rentai / Chen, Mengjun	Effects of temperature and bleeding on rheology of cement paste	133085
Ma, Qiang / Li, Yubiao / Li, Yang / Liu, Yuanyuan / Lei, Shaomin	Enhanced mortar strength and resistance to seawater degradation in the presence of calcined coal-series kaolin	132986
Liu, Gang / Zhang, Runxia / Gu, Zhaolin / Wang, Jianyun	Evaluation of calcined coal slime in binary and ternary ordinary portland cement composites: The role of calcination temperature	133091
John, Nithin Jacob / Khan, Imdadullah / Patel, Anjan	Evaluation of the crushing characteristics of industrial waste aggregates as construction materials	133111
He, Bianyang / Li, Yanfang / Chen, Junfeng / Fu, Mingjie / Zhang, Xinying / Li, Weishuang / Yu, Jianying / Zhu, Lei	Evaluation of UV aging resistance of bitumen containing lignosulfonate grafted layered double hydroxides	133026
Bao, Yingwei / Lu, Weidong / Yue, Kong / Lu, Binhui / Dai, Changlu / Qiu, Guorong	Experimental and nonlinear-analytical studies of cross-laminated-timber concrete composite floors with interface shear resistance enhancement of plate-end	133042
Li, Lingling / Xu, Fei / Tang, Haida / Wang, Junsong / Meng, Qinglin	Experimental and theoretical study on cooling performance of membrane roof with circulated water film	133115
Fan, Ran / Gong, Hangli / Luo, Yi / Zhang, Jinrui / Li, Xinping	Experimental characterization of dynamic strength and failure behavior of saturated reef limestone concrete under biaxial stress constraint	133116
Sun, Hang / Luo, Liang / Yuan, Huang / Li, Xi	Experimental evaluation of mechanical properties and microstructure for recycled aggregate concrete collaboratively modified with nano-silica and mixed fibers	133125
Xu, Ke / Deng, Peng / Huang, Pin / Xiao, Alin / Guo, Shuaicheng	Experimental investigation on the mechanical properties of concrete utilizing pre-coated Brick-Concrete recycled coarse aggregates	133113
He, Jingran / Hong, Junjie / Gao, Ruofan / Liu, Feng / Li, Lijuan	Experimental study on permeability of spun high strength concrete material during mechanical loading	133034
Yang, Jusung / Moon, Juhyuk	Experimental study on tracing the initial water–to-cement ratio of hardened concrete using petrography analysis	133199
Oubaha, Said / Taha, Yassine / Loutou, Mohamed / Oualid Mghazli, Mohamed / Benzaazoua, Mostafa / Hakkou, Rachid	Fired brick production using phosphogypsum and phosphate mining waste	133149
Alarrak, Rashed / Jeon, Byeonguk / Brand, Alexander S.	Fracture properties of extruded fiber-reinforced mortar with preferentially aligned fibers	133022
Bai, Yueji / Arulrajah, Arul / Horpibulsuk, Suksun / Chu, Jian	Gasified olive stone biochar as a green construction fill material	133003
Kaoutari, Taoufiq / Louahlia, Hasna / Schaetzel, Pierre / Lepinasse, Eric / Boutouil, Mohamed / Goodhew, Steve / Streif, François	Hygric properties and adsorption characteristics of simple and dual coblayers of bio-sourced building materials	133157
Veselý, Jakub / Šmilauer, Vít	Hygro-thermo-mechanical model for concrete pavement from an early age to a long-term performance	133068
Abomo, Therese / Kaze, Rodrigue Cyriaque / Cengiz, Özgür / Alomayri, Thamer / Pefouo Wilson, Tchi / Robert, Medjo Eko / Naghizadeh, Abdolhossein / Kamseu, Elie	Impact of the depth of a lateritic profile on the physicochemical, mechanical and microstructural properties of geopolymer binders	133138
Hu, Zhongjing / Wang, Qingbiao / Lv, Hao / Li, Kesheng / Zhang, Jinpeng / Ma, Yiming	Improved mechanical and macro-microscopic characteristics of shotcrete by incorporating hybrid alkali-resistant glass fibers	133131
Liu, Qiong / Tang, Huilin / Chen, Kailun / Sun, Chang / Li, Wengui / Jiao, Sufang / Tam, Vivian W. Y.	Improving industrial drying process of recycled fine aggregates as a means of carbonation to improve the mechanical properties and plastic shrinkage of self-leveling mortar	133001
Fu, Zhipeng / Wang, Xianfeng / Song, Qiao / Jiang, Ting / Li, Dawang / Xing, Feng	In-situ expansion compensation and repetitive self-healing of concrete using difunctional artificial aggregates	133140
Kontić, Ana / Vasconcelos, Graça / Briceño Melendez, Carolina / Azenha, Miguel / Sokolović, Neda	‘‘ Influence of air entrainers on the properties of hydrated lime mortars’’	132968
Yang, Jianhui / Wang, Li / Yang, Dongbo / Wang, Qinting	Influence of concrete and unbonded ratio on RC beams	133086
Lyu, Xin / Ahmed, Tanvir / Elchalakani, Mohamed / Yang, Bo / Youssf, Osama	Influence of crumbed rubber inclusion on spalling, microstructure, and mechanical behaviour of UHPC exposed to elevated temperatures	133174
Chen, Yidong / Zhang, Yunsheng / Zhang, Yu / Pang, Bo / Zhang, Wenhua / Liu, Cheng / Liu, Zhiyong / Wang, Dafu / Sun, Guowen	Influence of gradation on extrusion-based 3D printing concrete with coarse aggregate	133135
Liu, Dengkai / Chen, Hongniao / Su, Ray Kai Leung / Chen, Lijie / Liang, Kun	Influence of initial crack length on fracture properties of limestone using DIC technique	133020
Fan, L. F. / Chen, D. K. / Zhong, W. L. / Zhang, Y. H.	Influence of interface inclination angle and load impact velocity on dynamic splitting tensile behavior and dissipated energy of geopolymer-concrete composites	133112
Deng, Si-jie / Fan, Jie / Li, Geng-Ying / Zhang, Min / Li, Min	Influence of styrene-acrylic emulsion additions on the electrical and self-sensing properties of CNT cementitious composites	133172
Shahzad, Qamar / Li, Fang-Yuan	An innovative method for buildability assessment of 3d printed concrete at early-ages	133167
Wei, Chao / Yan, Yutong / Zhang, Zengqi / Liu, Xiaoming / Wu, Pengfei / Gu, Jiarui / Han, Fanghui / Ren, Qiang	Insight into the synergic effects of circulating fluidized bed fly ash, red mud and blast furnace slag in preparation of ultrahigh-performance concrete: Reaction mechanism and performance optimization	133120
Zhao, Jianjun / Li, Shuang / Zhang, Zicheng	Integrated composite wall with geopolymer permanent insulation formwork: Interface bonding behavior and mechanism	133110
Jiang, Ping / Wang, Zhichao / Wang, Wei / Li, Na / Yu, Yanfei / Li, Cuihong / Wu, Erlu / Pu, ShaoYun	Interfacial strength characteristics between modified iron tailings and profiled fibers under dry–wet and freeze–thaw environments	133016
Vyas, Abhilash / Wang, Yudi / Hajj, Ramez / Jahns, Ekkehard	Investigation of factors affecting modified asphalt binder development and performance using the poker chip test	133037
Shi, Peng / Falliano, Devid / Marano, Giuseppe Carlo / Huang, Yujie / Chen, Zhuorui / He, Bingjian	Investigation of the ionic curing effect and performance of modified nano-montmorillonite on river sludge pastes: Influence of sludge substitution and MNMt dosage	133183
Gao, Meng / Dai, Jun / Jing, Hongjun / Ye, Wanjun / Sesay, Taiwo	Investigation of the performance of cement-stabilized magnesium slag as a road base material	133065
Teng, Xiaodan / Lu, Chenyu / Li, Cong / Chen, Zheng	Investigation on shear mechanical behavior of the interface between sulphoaluminate cement (SAC)-ECC and existing concrete	133184
Zhao, Li-Cai / Xu, Liang / Yazdi, Amin	Laboratory evaluation of the effect of waste materials on mechanical properties of asphalt binder and mixture containing combined natural binder and waste polymer	132995
Rahman, Mohammad / Harvey, John / Buscheck, Jeffrey / Brotschi, Julian / Mateos, Angel / Jones, David / Pourtahmasb, Saeed	Laboratory performance and construction challenges for plant produced asphalt mixes containing RAP and RAS	133082
Xu, Jinghan / Zheng, Mulian / Ding, Xiaoyan / Qiao, Ruizhe / Zhang, Wenwu	Laboratory proportion design and performance evaluation of Fiber-Reinforced rubber asphalt chip seal based on multiple properties enhancement	133204
Al-Subari, By Lutf / Hilal, Adnan / Ekinci, Abdullah	Life cycle assessment of soil stabilization using cement and waste additives	133045
Chen, Leilei / Zhao, Xinyuan / Qian, Zhendong / Li, Xuehui	Mechanical behavior of asphalt pavement on steel-concrete composite beam bridge under temperature-load coupling	133099
Farag Gaddafi, Adel Kassem / Alengaram, U. Johnson / Bunnori, Norazura Muhamad / Ibrahim Muhammad, S. I. / Ibrahim, Shaliza / Sumesh, Mathialagan	Mechanical properties, flexural behaviour, and ductility characteristics of fibre-reinforced geopolymer mortar	133109
Jia, Ruiquan / Wang, Qiang / Luo, Ting	Mechanisms and differences between sodium and magnesium sulfate attacks on alkali-activated phosphorus slag	133117
Wang, Xiaowei / Ren, Jiaxing / Hu, Xinyu / Li, Qiang / Ji, Xiaoping	Meso-scale adhesive/cohesive failure behaviors of porous asphalt mixtures considering random inhomogeneous distribution of binder	133097
Peng, Zhangzhen / Wang, Qiao / Zhou, Wei / Chang, Xiaolin / Yue, Qiang / Huang, Chengbin	Meso-scale simulation of thermal fracture in concrete based on the coupled thermal–mechanical phase-field model	133095
Ai, Xinman / Pei, Zhongshi / Xu, Meng / Fan, Lulu / Tu, Liangliang / Yang, Jianhong / Feng, Decheng / Yi, Junyan	Micromechanical behavior of cement-treated base materials incorporating recycled crushed aggregates arising from C&D waste powder based on DEM	133100
Zhao, Zili / Jiang, Jiwang / Leng, Zhen / Ni, Fujian	Micropore structure characterization of the bitumen emulsion-based cold in-place recycling mixture considering water gradient migration condition through multiple XCT scanning	133084
Li, Yubo / Cheng, Lu / Lei, Wuyi / Su, Ying / Huang, Tao / Zhu, Yuxue / Mei, Can / He, Xingyang	Microstructures and mechanical property of post-fire grouting sleeve connections considering concrete cover	132578
Du, Junjie / Xiao, Huigang / Zhang, Fengling / Liu, Min	The micro–mechanical mechanism of multiple cracking behavior induced by interface strengthening for UHPC	133006
Zhang, Junhui / Shi, Xiuzhi / Guan, Weiming / Liu, Ying / Xia, Xiaocheng / Yuan, Jingjing / Chen, Xin	Mineralization performance and crystal characteristics of microbial induced carbonate precipitation in lead–zinc tailings under multiple factors	133081
Wadee, Ahmad / Achanta, Pallavi / Walker, Pete / McCullen, Nick / Ferrándiz-Mas, Veronica	Novel gypsum based plasters with phase change material impregnated lightweight aggregates for energy efficient retrofitting	133159
Su, Yan-Li / Wu, Chang / Shang, Jia-Qi / Zhang, Pu / Sheikh, Shamim Ahmed	Numerical and theoretical studies for the shear behavior of CFRP plate-ECC-concrete composite interface	133156
Ulus, Hasan / Burak Kaybal, Halil	Out-of-plane static loading performance of lightweight aluminum/composite FML structures for retrofitting applications: Effectiveness of bonded, bolted and hybrid bonded/bolted joining techniques under hydrothermal aging environment	133124
Wang, Chenman / Kayali, Obada / Liow, Jong-leng / Troitzsch, Ulrike	Participation and disturbance of superplasticisers in early-stage reaction of class F fly ash-based geopolymer	133176
Liu, Jun / Niu, Renjie / Hu, Junjie / Ren, Yuanrui / Zhang, Weizhuo / Liu, Guang / Li, Zhenlin / Xing, Feng / Ren, Jie	The performance and microstructure of alkali-activated artificial aggregates prepared from municipal solid waste incineration bottom ash	133012
Zheng, Yongfeng / Xie, Ming / Liu, Zetian / Zhang, Yu / Ding, Xin	Performance of high strength steel bar splice with novel grouted deformed sleeve under tensile load	133092
Fang, Yu / Yao, Zhishu / Xu, Yongjie / Li, Xinwei / Liu, Xiaohu / Huang, Xianwen	Permeability evolution and pore characteristics of reactive powder concrete of drilling shaft with initial salt erosion damage	133141
Thakur, Mohmad M. / Enright, Sean / Hurley, Ryan C.	Phase segmentation in X-ray CT images of concrete with implications for mesoscale modeling	133033
Wu, Fengnian / Bi, Haifeng / Lin, Haiqian / Wang, Xuping / Luan, Congqi / Cheng, Xin / Wang, Shoude / Huang, Yongbo	Physical and chemical chloride binding characteristics of the hydration products for phosphoaluminate cement	133044
Kiki, Gratien / Nshimiyimana, Philbert / Kouchadé, Clément / Messan, Adamah / Houngan, Aristide / André, Philippe	Physico–mechanical and durability performances of compressed earth blocks incorporating quackgrass straw: An alternative to fired clay	133064
Zhang, Yunhua / Zhang, Mengli / Huang, Dafan	Polycarboxylate superplasticizer as strengthening additive in carbonated artificial steel slag aggregate	133136
Li, Jingjing / Wang, Shuping / Zhong, Jingxiong / Xin, Yuntao / Lv, Xuewei / Zeng, Lu / Zeng, Guangwu	Properties and microstructure development of alkali- activated coal bottom ash and titanium- extraction tailing slag binder	133087
Carvalho, Aldo Ribeiro de / Calderón-Morales, Bianca Rafaela da Silva / Borba Júnior, José Carlos / Oliveira, Thaís Mayra de / Brigolini Silva, Guilherme Jorge	Proposition of geopolymers obtained through the acid activation of iron ore tailings with phosphoric acid	133078
Zhong, Zhen / Tao, Pan / Jin, Huijun / Lou, Rong / Cui, Yuhang / Liu, Jie	A quantitative investigation on the fragmentation performance of SCDA in cracking steel fiber reinforced concrete	133133
Yang, Shizhao / Wang, Xujiang / Hu, Zhijuan / Li, Jingwei / Yao, Xingliang / Zhang, Chao / Wu, Changliang / Zhang, Jiazheng / Wang, Wenlong	Recent advances in sustainable lightweight foamed concrete incorporating recycled waste and byproducts: A review	133083
Bocci, Edoardo / Prosperi, Emiliano	Recyclability of reclaimed asphalt rubber pavement	133040
Covilla-Varela, Elvis / Turbay, Emilio / Polo-Mendoza, Rodrigo / Martinez-Arguelles, Gilberto / Cantero-Durango, Julio	Recycled Concrete Aggregates (RCA)-based asphalt mixtures: A performance-related evaluation with sustainability-criteria verification	133203
Li, Yan / Zou, Zhengbo / Zhang, Jiupeng / He, Yinzhang / Huang, Guojing / Li, Junbo	Refined evaluation methods for preventive maintenance of project-level asphalt pavement based on confusion-regression model	133105
Li, Xiaoya / Jin, Liu / Du, Xiuli / Muciaccia, Giovanni	Refined simulation of bond-slip behavior between ribbed steel and concrete: Effects of initial stress and temperature	133166
Zhu, Xiangchen / Zhang, Yunsheng / Liu, Zhiyong / Qiao, Hongxia / Ye, Fukai / Lei, Zhang	Research on carbon emission reduction of manufactured sand concrete based on compressive strength	133101
Jiang, Wei / Xie, Youjun / Ma, Kunlin / Wu, Junqing / Long, Guangcheng	Research on two-dimensional digital characterization of crushed stone aggregates in the SCC filling layer of the CRTS III slab ballastless track	133132
Zhang, Zhihai / Xiao, Hong / Wang, Yang / Chi, Yihao / Nadakatti, Mahantesh M.	Response analysis and effect evaluation of dynamic stabilization for ballasted track	133154
Zokaei, Shahin / Siad, Hocine / Lachemi, Mohamed / Mahmoodi, Obaid / Şahmaran, Mustafa	Self-healing capability of engineered cementitious composites with calcium aluminate cement	133051
Zhao, Zhongzhong / Li, Hui / Liu, Wenhuan / Wan, Yongfeng / Huang, Wen	Solidification of heavy metals in lead smelting slag-based cementitious materials via the hybrid binder method	133129
Christoforidou, Angeliki / Verleg, Ron / Pavlović, Marko	Static, fatigue and hygroscopic performance of steel-reinforced resins under various temperatures	133079
Huang, Dongming / Liu, Zhenzhen / Ma, Wentao / Lu, Yiyan / Li, Shan	Steel fiber-reinforced recycled aggregate concrete-filled GFRP tube columns: Axial compression performance	133143
Góra, Jacek / Piasta, Wojciech	Strains of high-performance and ordinary concretes depending on the cement paste volume and the w/c ratio	133134
Rahmat, Mohamad Nidzam / Saleh, Ani Maslina	Strength and environmental evaluation of building bricks using industrial waste for liveable environments	132864
Huang, Kai / Cai, Guojun / Yan, Chao / Yu, Jinhuang / Tang, Liping / Zhang, Jun	Strength and microstructure characteristics of red-bed weathered residual soil stabilized by Titanium Gypsum-Cement	133071
Kojima, Kaishi / Kim, JiHoon / Kitagaki, Ryoma / Hama, Yukio	Study of microstructural changes in blast-furnace cement hardened by repeated dry and wet curing at high temperatures	132861
Moreno-Maroto, José Manuel / Cobo-Ceacero, Carlos Javier / Martínez-Rodríguez, Ana M. / Conde-Sánchez, Antonio / González-Corrochano, Beatriz / Alonso-Azcárate, Jacinto / Uceda-Rodríguez, Manuel / López, Ana B. / Martínez-García, Carmen / Cotes-Palomino, Teresa	Study of the synergistic impact of Fe3O4, Na2CO3 and organic C on kaolin-based lightweight aggregates by a DOE (Mixture Experiments) approach	133152
Zhang, Zhenhua / Cui, Wentian / Liu, Zhidan / Liu, Wu / Xi, Banglu / Chen, Mingliang	Study on the cracking mechanism of strongly weathered purple mudstone under wetting and drying effect through experiments and molecular dynamics simulation	133104
Pan, Kaiming / Wu, Zhimin / Yu, Rena C. / Zhang, Xiaoxin	Study on the dynamic fracturing characteristics of aggregate-mortar interface under various loading rates using DIC	133069
Duan, Dedan / Song, Huiping / Liu, Fanyu / Liu, Qian / Fan, Zhenlian / Cheng, Huaigang / Cheng, Fangqin	Study on the influence mechanism of flue gas desulphurisation gypsum on solid waste-based geopolymer grouting materials	133137
Marji, Mohammad Fatehi / Yousofian, Hatef / Soltanian, Hamid / Pourmazaheri, Yaser / Abdollahipour, Abolfazl	Superior crack propagation inhibitory effectiveness of MWCNT reinforced SBS toward improving oil/gas well cement integrity	133171
Shen, Zihao / Liu, Wenguang / Zhang, Qiang	Tensile behavior of high-performance interlayer hybrid composites of polypropylene and glass fiber for civil engineering	133017
Zhang, Yu / Gao, Danying	Tensile property analysis of carbon/glass hybrid fibers-reinforced graphene-modified polymer bars	133178
Askouni, Paraskevi D. / Polydoropoulos, Spyridon / Papanicolaou, Catherine G.	Textile Reinforced Mortar/masonry joints under reverse cyclic in-plane shear	133122
Khademi, Pooria / Mousavi, Mohsen / Dackermann, Ulrike / Gandomi, Amir H.	Time–frequency analysis of ultrasonic signals for quality assessment of bonded concrete	133062
Bandeira Barros, Laís / Knockaert, Mirjam / Tenório Filho, José Roberto	Towards a more sustainable construction industry: Bridging the gap between technical progress and commercialization of self-healing concrete	133094
Hao, Zhexin / Lu, Cong	User-friendly end-to-end fiber identification for fiber-reinforced cementitious composites (FRCC) through deep learning	133169
Han, Xu / Zhang, Peng / Zheng, Yuanxun / Wang, Juan	Utilization of municipal solid waste incineration fly ash with coal fly ash/metakaolin for geopolymer composites preparation	133060
Guo, Chuanchuan / Wang, Ru	Utilizing lithium slag to improve the physical-chemical properties of alkali-activated metakaolin-slag pastes: Cost and energy analysis	133164
Zhang, Junran / Liu, Jiahao / Cheng, Yan / Jiang, Tong / Sun, De'an / Saberian, Mohammad	Water-retention behaviour and microscopic analysis of two biopolymer-improved sandy soils	133202
Hoy, Menglim / Tran, Ngoc Quynh / Suddeepong, Apichat / Horpibulsuk, Suksun / Buritatum, Apinun / Yaowarat, Teerasak / Arulrajah, Arul	Wetting-drying durability performance of cement-stabilized recycled materials and lateritic soil using natural rubber latex	133108
al-Bashiti, Mohammad Khaled / Naser, M. Z.	What can we learn from over 1000 tests on fire-induced spalling of concrete? A statistical investigation of critical factors and unexplored research space	133200

Informations
sur cette fiche
IssueID
70415
Publié(e) le:
01.09.2023
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.