Construction and Building Materials - October 2023

Published:	October 2023

Articles in this Issue

Author(s)	Title	Page(s)
Cheng, Boyuan / Mei, Liu / Long, Wu-Jian / Kou, Shicong / Li, Lixiao / Geng, Songyuan	Ai-guided proportioning and evaluating of self-compacting concrete based on rheological approach	132522
Shi, Baocun / Liu, Quan / Gao, Yangming / Wu, Jiantao / Chen, Jingya	Analysis of the cohesion/adhesion proportion around bitumen-mineral failure interface under tensile loading	132555
Venkatesan, B. / Kannan, V. / Sophia, M.	Application potentials of conch shell powder as a bacterial carrier for enhancing the Micro-Mechanical performance of biogenic gypsum plaster	132561
Cárdenas-Pulido, Jhon / Carrillo, Julian / Reyes, Juan C. / Ramirez, Fernando	Backbone model for predicting the shear behavior of geopolymer panels under diagonal tension tests	132454
Dong, Hao / Wang, Jun	Carbon nanofibers and polyvinyl-alcohol fiber hybrid-reinforced high-performance concrete: Mechanical property, chloride penetration resistance, and material characterization	131891
Moro, Carlos / Francioso, Vito / Lopez-Arias, Marina / Velay-Lizancos, Mirian	CO2 curing of mortar with natural and recycled concrete aggregate: An environmental and economic assessment	132587
Adazabra, Aaron N. / Viruthagiri, G. / Yirijor, John	Combined effects of biomass bottom ashes and spent charcoal on characteristics of fired clay bricks	132570
Zhang, Hongen / Sarker, Prabir Kumar / Wang, Qingyuan / He, Bei / Kuri, Jhutan Chandra / Jiang, Zhengwu	Comparison of compressive, flexural, and temperature-induced ductility behaviours of steel-PVA hybrid fibre reinforced OPC and geopolymer concretes after high temperatures exposure	132560
Xu, Chao / Xue, Lei / Cui, Yuan / Zhai, Mengyang / Bu, Fengchang	Critical slowing down phenomenon for predicting the failure of solid rocks and cement mortar materials: Insight from acoustic emission multiparameters	132523
Huang, Huanghuang / Ren, Xu / Liu, Zhichao / Wang, Fazhou	Development of low-carbon and cost-effective ultra-high performance concrete using carbonated recycled fine aggregate	132575
Kütük-Sert, Tuba / Öztürk, Mehmet / Kütük, Sezai	Digital image processing of warm mix asphalt enriched with nanocolemanite and nanoulexite minerals	132542
Huang, Zhenyu / Pan, Weining / Du, Shilin / Zhou, Yingwu / Ye, Jianqiao	Dynamic splitting behavior of ultra-lightweight cement composite with rubber and polyethylene fiber	132577
Zou, Dinghua / Xiao, Lutong / Zhang, Yisheng / Li, Haiyan	Effect of hexadecyltrimethoxysilane modified micro silica particles on workability and compressive strength of ultra-high-performance concrete	132480
Wang, Rui / Chen, Hui / Bahia, Hussain U.	Effect of Multiple Aging-Rejuvenating Cycles (MARC) on critical rheological and fatigue properties of asphalt binder	132392
De Santis, Yuri / Aloisio, Angelo / Pasca, Dag Pasquale / Fragiacomo, Massimo / Dombrowski, Fabian	Evaluation of the shear size effect in glued laminated timber using a stochastic FE model calibrated on 17000 glue-line tests	132488
Gao, Qinglin / Xin, Haohui / Zhang, Youyou	Experimental investigation on transverse tension-tension fatigue behavior of pultruded glass-fiber reinforced polymer (GFRP) unidirectional lamina	132527
Li, Haotian / Li, Xuelong / Fu, Jianhua / Zhu, Ningqiang / Chen, Deyou / Wang, Yong / Ding, Sheng	Experimental study on compressive behavior and failure characteristics of imitation steel fiber concrete under uniaxial load	132599
Saberi K., Farshad / Wang, Yizhuang David / Liu, Jenny	Improving rheological and thermal performance of Gilsonite-Modified binder with phase change materials	132557
Elbelbisi, Ahmed / El-Sisi, Alaa / Knight, Jonathan / Caleb Philipps, Joseph / Newberry, Michael / Salim, Hani	Influence of panels size on the static and dynamic performance of laminated glass panels	132562
Zhang, Yu / Yang, Lin / Qian, Rusheng / Liu, Guojian / Zhang, Yunsheng / Du, Hongjian	Interlayer adhesion of 3D printed concrete: Influence of layer stacked vertically	132424
Chaimongkhol, Chananun / Medepalli, Satya / Zheng, Yuqian / Matsuda, Taku / Ishida, Tetsuya / Wang, Tiao	Investigating the effects of cracks and low-calcium supplementary cementitious materials on steel fiber corrosion in cement paste	132554
Azadeh, A. / Quiroga Flores, A. / Ghavami, K. / Barbosa, N. P. / Toledo Filho, R. D. / Junior, H. Savastano	An investigation of bamboo shear test methods and the influence of heat on bamboo shear strength	132586
Xiamuxi, Alifujiang / Aosimanjiang, Abudureyimujiang / Yang, Bin	Loading performance of reinforced and recycled aggregate concrete-filled circular steel tube short column with different steel ratios	132486
Wie, Young Min / Hyuck Lee, Kang / Lee, Ki Gang / Park, Jaehyeoung / Ko, Taehoon / Lee, Kang Hoon	Manufacture of artificial lightweight aggregates recycled from anaerobic digested sewage sludge and process optimization by machine learning modeling techniques	132502
Wang, Ning / Zhang, Chao / Ma, Tao / Nadimi, Sadegh / Chen, Feng / Ding, Xunhao	Mechanical insights into the behavior of cement stabilized aggregates during compaction and failure using smart aggregate: Experiments and DEM simulations	132504
Los Santos - Ortega, Jorge / Fraile - García, Esteban / Ferreiro - Cabello, Javier	Methodology for the environmental analysis of mortar doped with crumb rubber from end-of-life tires	132519
Cai, Jingxuan / Zhou, Jinghong / Liu, Cheng / Mei, Kaiyuan / Zhang, Chunmei / Cheng, Xiaowei	Microencapsulated phase change material-cement composites for cementing the natural gas hydrate layer	132591
Hoon Rhee, Jeong / Gwon, Seongwoo / Sim, Sungwon / Kim, Gun	Mitigating self-desiccation of cement composites via cellulose microfibers: Evidence of the microscopic behavior	132585
Liu, Yangqing / Wu, Bo / Qiu, Jishen	A new fiber-bridging constitutive model for quantifying the matrix carbonation and fiber-to-matrix interface healing in PVA fiber-reinforced SHCC	132548
Patalas, Filip / Brol, Janusz / Nowak, Tomasz P.	Numerical analysis, experimental tests and non-linear analytical models in the study of bent timber beams reinforced with FRP strips	132531
Han, Xiaoyu / Yan, Jiachuan / Chen, Tiefeng / Tang, Boyang / Lin, Yini	Plastic shrinkage of 3D printed concrete under different self-weight of upper layers	132564
Chen, Peiyuan / Wang, Chunjie / Wang, Yonghui / Xie, Jiankai / Shen, Xin / Wang, Cheng / Wang, Jialai	Pre-carbonation of calcium carbide slag for the preparation of eco-friendly mortars	132541
Guan, Xi / Wang, Fuyun / Ren, Qiang / Zheng, Youzhi / Mei, Kai yuan / Zhang, Chunmei / Cheng, Xiaowei	Preparation and mechanism of tartaric acid-intercalated hydrotalcite retarder for oil-well cement	132580
Kumanan, T. S. / Sofi, A.	Progression of bio-modified adobes with derivatives of cassava periderm and clay brick waste by experimental and probabilistic prediction models	132535
Li, Bo / Qin, Jiefa / Li, Qiu / Chen, Wei / Cao, Hailin / Guo, Yue	Promoting the dissolution of slag in blended cement via adding polyaluminum sulfate and controlling the inner spatial zonation	132543
Tesic, Ksenija / Baričević, Ana / Serdar, Marijana / Gucunski, Nenad	Quantifying the impact of parameters of chloride-induced reinforcement corrosion on the GPR signal	132594
Siahkouhi, Mohammad / Wang, Junyi / Han, Xiaodong / Aela, Peyman / Ni, Yi-Qing / Jing, Guoqing	Railway ballast track hanging sleeper defect detection using a smart CNT self-sensing concrete railway sleeper	132487
Zhao, Zenggang / Wu, Shaopeng / Xie, Jun / Yang, Chao / Yang, Xinkui / Chen, Shuaichao / Liu, Quantao	Recycle of waste tire rubber powder in a novel asphalt rubber pellets for asphalt performance enhancement	132572
Li, Xiaoya / Zhang, Renbo / Jin, Liu / Du, Xiuli	Refinement simulation of bond-slip performance of deformed reinforced concrete exposed to fire: Parametric analysis	132558
Mojibi, M. S. / Shariq, M. / Masood, A. / Mahdi, F. / Abbas, H.	Residual load capacity of HVFA reinforced concrete after elevated temperature heating: Experimental and analytical study	132569
Binega Yemesegen, Eden / Memari, Ali M.	A review of experimental studies on Cob, Hempcrete, and bamboo components and the call for transition towards sustainable home building with 3D printing	132603
Cota, Tiany Guedes / Cheloni, Letícia Maria de Melo Silva / Guedes, Jhonny José Magalhães / Reis, Érica Linhares	Silico-manganese slag and its utilization into alkali-activated materials: A critical review	132589
Liu, Xiaoyu / Zhang, Huimei / Luo, Shenghu	Size effect model of nominal tensile strength with competing mechanisms between maximum defect and fracture process zone (CDF model) for quasi-brittle materials	132538
Zeynali, Yasaman / Niroumand, Hamed / Moayed, Reza Ziaie	Stabilizing cohesive soils with Micro- and Nano- fly ash as Eco-friendly Materials: An experimental study	132490
Meng, Lingqi / Ding, Yahong / Li, Lei / Wei, Jiuqi / Li, Mingzhe / Wang, Junlei / Cao, Shaohua / Liu, Jingbiao	Study on dynamic properties of lightweight ultra-high performance concrete (L-UHPC)	132526
Yang, Siyu / Chen, Chuxin / Li, Wenting / Liu, Sifeng	Study on the effect of 5/20 and 20/80 °C temperature cycle curing regimes on the properties of polyacrylate dispersion-modified cement mortar	132520
Wang, Chengaonan / Chen, Mu / Wang, Yansong	Surface flaking mechanism of stone components of ancient building complex in Wudang Mountain, China	132611
Zhu, Zhaorong / Lu, Yiyan / Zhou, Man	Surface modification of recycled tire rubber powders with Tannic acid and Nano-TiO2 for enhanced performance and photocatalytic properties of Rubberized Cement-Based materials	132607
Chauhan, Babu Lal / Singh, Gyani Jail	Sustainable development of recycled concrete aggregate through optimized acid-mechanical treatment: A simplified approach	132559
Zhao, Bingxun / Yao, Kai / Wu, Libo / Fan, Yufeng / Sun, Zhuang / Wang, Yue-Sheng	Theoretical and experimental study on the effect of stress corrosion on magnetic flux leakage signals	132461
Chéruel, Anthony / Ben Ftima, Mahdi	Unrestrained ASR volumetric expansion for mass concrete structures: Review and experimental investigation using 3d laser scanning	132565
Gencel, Osman / Nodehi, Mehrab / Bozkurt, Ahmet / Sarı, Ahmet / Ozbakkaloglu, Togay	The use of computerized tomography (CT) and image processing for evaluation of the properties of foam concrete produced with different content of foaming agent and aggregate	132433
Villaquirán-Caicedo, Mónica A. / Fernández-González, Alejandro / Fernández-García, Daniel A. / Mejía de Gutiérrez, Ruby	Valorization of a low-quality coal ash, in the preparation of alkali activated inks for applications in 3D additive manufacturing	132598
Palacio, Oriana / Malfait, Wim J. / Michel, Silvain / Barbezat, Michel / Mazrouei-Sebdani, Zahra	Vibration and structure-borne sound isolation properties of silica aerogels	132568

About this
data sheet
IssueID
70414
Published on:
01/09/2023
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.