Construction and Building Materials - June 2023

Published:	June 2023

Articles in this Issue

Author(s)	Title	Page(s)
Wang, Yanli / Ma, Jiao / Qing, Longbang / Liu, Lina / Shen, Boxiong / Li, Shuhao / Zhang, Zhikun	Accelerated carbonation pretreatment of municipal solid waste incineration fly ash and its conversion to geopolymer with coal fly ash	131363
Tchadjié, Léonel N. / Ekolu, Stephen O. / Quainoo, Harry A.	Alkali-bauxite fusion method of synthesizing ambient-cured volcanic ash geopolymer cement mortars	131401
Chen, Conglin / Lu, Jinbo / Ma, Tao / Zhang, Yang / Gu, Linhao / Chen, Xiang	Applications of vegetable oils and their derivatives as Bio-Additives for use in asphalt binders: A review	131312
Liu, Lixi / Liu, Yilun / Su, Buyun / Liu, Chao / Chen, Xi	Assessing CO2 uptake of CO2-cured cement mortar through theoretical modeling and experimental validation	131393
Li, Liang / Dabarera, Arosha / Dao, Vinh	Assessment of cracking risk of concrete due to restrained strain based on zero-stress temperature and cracking temperature	131381
Bayesteh, Hamed / Hezareh, Hamidullah	Behavior of cement-stabilized marine clay and pure clay minerals exposed to high salinity grout	131334
Liu, Junli / Tran, Phuong	Cement mortar containing crumb rubber coated with geopolymer: From microstructural properties to compressive strength	131284
Fernando, Shanelle / Vandi, Luigi-Jules / Heitzmann, Michael / Fernando, Dilum	Cure cycle optimisation of structural epoxies used in composite civil infrastructure through the use of TTT diagrams	131332
Kim, Ryulri / Min, Jiyoung / Lee, Jong-Suk / Jin, Seung-Seop	Development of Bayesian regularized artificial neural network for airborne chlorides estimation	131361
Zhao, Yasong / Gao, Yangyunzhi / Chen, Gaofeng / Li, Shujun / Singh, Amardeep / Luo, Xu / Liu, Cheng / Gao, Jianming / Du, Hongjian	Development of low-carbon materials from GGBS and clay brick powder for 3D concrete printing	131232
Zhang, Gengtong / Xia, Huiyun / Wang, Hao / Song, Lifang / Niu, Yanhui / Cao, Dongwei / Chen, Huaxin	Early hydration characteristics and kinetics model of cement pastes containing internal curing materials with different absorption behaviors	131412
Cabané, Albert / Pelà, Luca / Roca, Pere	Effect of cross section aspect ratio and bearing surfaces treatment on the compressive strength of solid fired clay brick specimens	131397
Srinivasamurthy, Lakshmikanth / Chevali, Venkata S. / Zhang, Zuhua / Wang, Hao	Effect of fly ash to slag ratio and Na2O content on leaching behaviour of fly Ash/Slag based alkali activated materials	131234
He, Hui / Zhang, Huagang / Yang, Jiaojiao / Fan, Zongyuan / Chen, Wei	Effect of pressing pressure on the mechanical properties and water resistance of straw/sawdust-magnesium oxychloride cement composite	131362
Jia, Zhenzhen / Zhang, Lihao / Fang, Li / Guo, Yanxia / Cheng, Fangqin	Effect of seed emulsion on the early hydration behavior of basic magnesium sulfate cement	131316
Flessati, Luca / Della Vecchia, Gabriele / Musso, Guido	Effects of curing on the hydro-mechanical behaviour of cement-bentonite mixtures for cut-off walls	131392
Bao, Yunfeng / Guo, Siyao / Jia, Zhiqing / Guan, Hailong	Effects of MOFs-derived Ni@NC/CNT nanocomposites on impermeability and microwave absorption of modified epoxy resin coatings on cement-based materials	131337
Zhao, Qingxin / Lv, Tong / Liang, Hui / Zhang, Juntao / Zhang, Jinrui	Enhancement of sintered sludge ash-modified cement paste with CaSO4 and CaCl2	131245
Shi, Jiachen / Gong, Hongren / Cong, Lin / Liang, Haimei / Ren, Minda	Evaluating and quantifying segregation in asphalt pavement construction: A state-of-the-practice survey	131205
Tenpierik, Martin J. / Lachi, Mohammed / Bliard, Christophe / Polidori, Guillaume / Maalouf, Chadi	Experimental and numerical investigation of the thermal inertia of sugar-beet-pulp/starch based bricks enhanced with phase change materials	131367
Hermawan, Harry / Wiktor, Virginie / Gruyaert, Elke / Serna, Pedro	Experimental investigation on the bond behaviour of steel reinforcement in self-healing concrete	131378
Bai, Ying-hua / Zhang, De-yue / Shen, Kang / Yan, Yan	Experimental study and numerical simulation on the bonding properties of rubber concrete and deformed steel bar	131416
Gedik, Ebru / Atmaca, Adem	An experimental study investigating the effects of bentonite clay on mechanical and thermal properties of concrete	131279
Mamazizi, Arman / Ahmadi, Asra / Khayati, Saman / Soltanabadi, Reza	Experimental study on post-fire mechanical properties of Grade 12.9 high-strength bolts	131236
Yang, Guoliang / Dong, Zhiwen / Bi, Jingjiu / Zhao, Kangpu / Li, Feng	Experimental study on the dynamic splitting tensile properties of polyvinyl-alcohol-fiber-reinforced cementitious composites	131233
Olivier, Gerhard / Csillag, Fruzsina / Christoforidou, Angeliki / Tromp, Liesbeth / Veltkamp, Martijn / Pavlović, Marko	Feasibility of bolted connectors in hybrid FRP-steel structures	131100
Wang, Li Pang / Tseng, Pin Wei / Huang, Kai Jyun / Chen, Yan Jhang	Foam glass production from waste bottle glass using silicon cutting waste of loose abrasive slurry sawing as foaming agent	131344
Asghar, Muhammad Faizan / Khattak, Mohammad Jamal	Fracture and fatigue characteristics of high performing novel hot mix asphalt composites	131217
Yan, Tianhao / Cash, Kristen / Turos, Mugurel / Marasteanu, Mihai	High-compactability asphalt mix design framework based on binary aggregate packing	131315
Nelson, Shaun / Geddes, Daniel A. / Kearney, Sarah A. / Cockburn, Sally / Hayes, Martin / Angus, Michael J. / Cann, Gavin / Provis, John L.	Hydrate assemblage stability of calcium sulfoaluminate-belite cements with varying sulfate content	131358
Ting, Matthew Zhi Yeon / Yi, Yaolin	Influence of short-term binder-bentonite interactions on workability of sand-bentonite-binder mixture for seepage cut-off wall	131260
Azarhomayun, Fazel / Haji, Mohammad / Shekarchi, Mohammad / Kioumarsi, Mahdi	Investigating the Effectiveness of the Stable Measurement Tests of Self-Compacting Concrete	131262
Sinha, Arnab Kumar / Talukdar, Sudip	Mechanical and bond behaviour of high volume Ultrafine-slag blended fly ash based alkali activated concrete	131368
Ferrazzo, Suéllen Tonatto / Tonini de Araújo, Mariana / Bruschi, Giovani Jordi / Chaves, Helder Mansur / Pavan Korf, Eduardo / Consoli, Nilo Cesar	Mechanical and environmental behavior of waste foundry sand stabilized with alkali-activated sugar cane bagasse ash-eggshell lime binder	131313
Wang, Xianfeng / He, Quan / Huang, Yingxin / Song, Qiao / Zhang, Xiaogang / Xing, Feng	Mechanical characteristics of fiber-reinforced microcapsule self-healing cementitious composites by orthogonal tests	131377
Wu, Huixia / Hu, Ruihan / Yang, Dingyi / Ma, Zhiming	Micro-macro characterizations of mortar containing construction waste fines as replacement of cement and sand: A comparative study	131328
Faraj, Rabar H. / Mohammed, Azad A. / Omer, Khalid M.	Microstructure characteristics, stress–strain behaviour, fresh properties, and mechanical performance of recycled plastic aggregate self-compacting concrete modified with nano-silica	131371
Caron, Richard / Patel, Ravi A. / Bogner, Andreas / Dehn, Frank	Multi-scale experimental investigation and analytical micro-mechanical modeling to determine Young’s modulus of alkali-activated slag concrete	131272
Li, Wentao / Chen, Yin / Li, Runxiang / Xiao, Henglin / Li, Lihua / Yang, Jingtong	A new method for carbonating magnesia and its possible application to soil stabilization and CO2 capture	131263
Qu, Min / Wang, Fazhou / Liu, Peng / Macphee, Donald E. / Hu, Chuanlin / Yang, Lu	A novel alkali-activated cement from mineral admixture, superabsorbent polymers, and alkali-doped carboxylate glass	131459
Cheng, Can / Liu, Jian / Gong, Fangyuan / Fu, Yanrong / Cheng, Xuejiao / Qiao, Jiangang	Performance and evaluation models for different structural types of asphalt mixture using shape-stabilized phase change material	131411
Amani, Saeed / Jahangiri, Behnam / Karimi, Mohammad M.	Performance characterization of asphalt mixtures under different aging levels: A fracture-based method	131126
Jeon, Siwoo / Ju, Minkwan / Park, Jihyuk / Choi, Habeun / Park, Kyoungsoo	Prediction of concrete anchor pull-out failure using cohesive zone modeling	130993
Yu, Xiaoniu / Chu, Jian / Wu, Shifan / Wang, Kangda	Production of biocement using steel slag	131365
Kim, Kyoung-Min / Lee, Sangho / Yu, Yongjae / Cho, Jae-Yeol	Requirements of specimen dimension considering maximum coarse aggregate size for concrete split Hopkinson pressure bar tests	131359
Ji, Xin-Lin / Chen, Li-Jie / Liang, Kun / Pan, Wei / Su, Ray Kai-Leung	A review on FRP bars and supplementary cementitious materials for the next generation of sustainable and durable construction materials	131403
Daoust, K. / Begriche, A. / Claverie, J. P. / Tagnit-Hamou, A.	Self-dispersing silica fume nanoparticles: A valuable admixture for ultra high-performance concrete	131357
Zuo, Kangle / Gu, Xiaoqiang / Hu, Chao / Hu, Jing / Gao, Guangyun	Shear stiffness of sand-fines binary mixtures: Effects of sand gradation and fines content	131364
Dias, Sara / Tadeu, António / Almeida, João / António, Julieta / de Brito, Jorge	Steel-concrete bond behaviour of concrete mixes with wood waste: pull-out and bending tests of full-scale beams and columns	131343
Zhao, Bing / Wang, Guangjin / Wu, Bisheng / Kong, Xiangyun	A study on mechanical properties and permeability of steam-cured mortar with iron-copper tailings	131372
Wang, Ruiyang / Yu, Jianying / Liu, Quantao / Kuang, Dongliang / Qiu, Heping	Synergistic effect of ion chelating agent and magnesium fluorosilicate on self-repairing ability and microstructure of mortar	131375
Zuo, Peixian / Liu, Zhong / Zhang, Hua / Sivanathan, Amende / Dai, Dasong / Fan, Mizi	Thermal transformation of bamboo sawdust for its advanced cementitious composites	131395
Jiang, Zhilu / Pan, Yingjie / Fu, Chuanqing / Li, Weiwen / Wang, Yaocheng / Long, Wu-Jian	Three-dimensional pore structure characterization of cement paste by X-ray computed tomography (XCT) and focused ion beam/scanning electron microscopy (FIB/SEM)	131379
Li, Zhun / Wang, Shengyue	Transferring heat accumulated by asphalt pavement from inside to outside through carbon fibers	131314
Myskowski, Brett / de O. Lima, Arthur / Edwards, J. Riley	Under tie (sleeper) pads – A state of the art review	131239
Ahmed, Nadia	Utilizing plastic waste in the building and construction industry: A pathway towards the circular economy	131311
Lin, Chunjin / Wang, Mengya / Liu, Xiaolin / Li, Zhaofeng / Zhang, Jian / Gao, Yifan	Working performance of red mud-based grouting materials mixed with ultrafine limestone and quartz	131326

About this
data sheet
IssueID
69873
Published on:
30/05/2023
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - June 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - June 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.