Construction and Building Materials - Juni 2023

Erschienen:	Juni 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wang, Yanli / Ma, Jiao / Qing, Longbang / Liu, Lina / Shen, Boxiong / Li, Shuhao / Zhang, Zhikun	Accelerated carbonation pretreatment of municipal solid waste incineration fly ash and its conversion to geopolymer with coal fly ash	131363
Tchadjié, Léonel N. / Ekolu, Stephen O. / Quainoo, Harry A.	Alkali-bauxite fusion method of synthesizing ambient-cured volcanic ash geopolymer cement mortars	131401
Chen, Conglin / Lu, Jinbo / Ma, Tao / Zhang, Yang / Gu, Linhao / Chen, Xiang	Applications of vegetable oils and their derivatives as Bio-Additives for use in asphalt binders: A review	131312
Liu, Lixi / Liu, Yilun / Su, Buyun / Liu, Chao / Chen, Xi	Assessing CO2 uptake of CO2-cured cement mortar through theoretical modeling and experimental validation	131393
Li, Liang / Dabarera, Arosha / Dao, Vinh	Assessment of cracking risk of concrete due to restrained strain based on zero-stress temperature and cracking temperature	131381
Bayesteh, Hamed / Hezareh, Hamidullah	Behavior of cement-stabilized marine clay and pure clay minerals exposed to high salinity grout	131334
Liu, Junli / Tran, Phuong	Cement mortar containing crumb rubber coated with geopolymer: From microstructural properties to compressive strength	131284
Fernando, Shanelle / Vandi, Luigi-Jules / Heitzmann, Michael / Fernando, Dilum	Cure cycle optimisation of structural epoxies used in composite civil infrastructure through the use of TTT diagrams	131332
Kim, Ryulri / Min, Jiyoung / Lee, Jong-Suk / Jin, Seung-Seop	Development of Bayesian regularized artificial neural network for airborne chlorides estimation	131361
Zhao, Yasong / Gao, Yangyunzhi / Chen, Gaofeng / Li, Shujun / Singh, Amardeep / Luo, Xu / Liu, Cheng / Gao, Jianming / Du, Hongjian	Development of low-carbon materials from GGBS and clay brick powder for 3D concrete printing	131232
Zhang, Gengtong / Xia, Huiyun / Wang, Hao / Song, Lifang / Niu, Yanhui / Cao, Dongwei / Chen, Huaxin	Early hydration characteristics and kinetics model of cement pastes containing internal curing materials with different absorption behaviors	131412
Cabané, Albert / Pelà, Luca / Roca, Pere	Effect of cross section aspect ratio and bearing surfaces treatment on the compressive strength of solid fired clay brick specimens	131397
Srinivasamurthy, Lakshmikanth / Chevali, Venkata S. / Zhang, Zuhua / Wang, Hao	Effect of fly ash to slag ratio and Na2O content on leaching behaviour of fly Ash/Slag based alkali activated materials	131234
He, Hui / Zhang, Huagang / Yang, Jiaojiao / Fan, Zongyuan / Chen, Wei	Effect of pressing pressure on the mechanical properties and water resistance of straw/sawdust-magnesium oxychloride cement composite	131362
Jia, Zhenzhen / Zhang, Lihao / Fang, Li / Guo, Yanxia / Cheng, Fangqin	Effect of seed emulsion on the early hydration behavior of basic magnesium sulfate cement	131316
Flessati, Luca / Della Vecchia, Gabriele / Musso, Guido	Effects of curing on the hydro-mechanical behaviour of cement-bentonite mixtures for cut-off walls	131392
Bao, Yunfeng / Guo, Siyao / Jia, Zhiqing / Guan, Hailong	Effects of MOFs-derived Ni@NC/CNT nanocomposites on impermeability and microwave absorption of modified epoxy resin coatings on cement-based materials	131337
Zhao, Qingxin / Lv, Tong / Liang, Hui / Zhang, Juntao / Zhang, Jinrui	Enhancement of sintered sludge ash-modified cement paste with CaSO4 and CaCl2	131245
Shi, Jiachen / Gong, Hongren / Cong, Lin / Liang, Haimei / Ren, Minda	Evaluating and quantifying segregation in asphalt pavement construction: A state-of-the-practice survey	131205
Tenpierik, Martin J. / Lachi, Mohammed / Bliard, Christophe / Polidori, Guillaume / Maalouf, Chadi	Experimental and numerical investigation of the thermal inertia of sugar-beet-pulp/starch based bricks enhanced with phase change materials	131367
Hermawan, Harry / Wiktor, Virginie / Gruyaert, Elke / Serna, Pedro	Experimental investigation on the bond behaviour of steel reinforcement in self-healing concrete	131378
Bai, Ying-hua / Zhang, De-yue / Shen, Kang / Yan, Yan	Experimental study and numerical simulation on the bonding properties of rubber concrete and deformed steel bar	131416
Gedik, Ebru / Atmaca, Adem	An experimental study investigating the effects of bentonite clay on mechanical and thermal properties of concrete	131279
Mamazizi, Arman / Ahmadi, Asra / Khayati, Saman / Soltanabadi, Reza	Experimental study on post-fire mechanical properties of Grade 12.9 high-strength bolts	131236
Yang, Guoliang / Dong, Zhiwen / Bi, Jingjiu / Zhao, Kangpu / Li, Feng	Experimental study on the dynamic splitting tensile properties of polyvinyl-alcohol-fiber-reinforced cementitious composites	131233
Olivier, Gerhard / Csillag, Fruzsina / Christoforidou, Angeliki / Tromp, Liesbeth / Veltkamp, Martijn / Pavlović, Marko	Feasibility of bolted connectors in hybrid FRP-steel structures	131100
Wang, Li Pang / Tseng, Pin Wei / Huang, Kai Jyun / Chen, Yan Jhang	Foam glass production from waste bottle glass using silicon cutting waste of loose abrasive slurry sawing as foaming agent	131344
Asghar, Muhammad Faizan / Khattak, Mohammad Jamal	Fracture and fatigue characteristics of high performing novel hot mix asphalt composites	131217
Yan, Tianhao / Cash, Kristen / Turos, Mugurel / Marasteanu, Mihai	High-compactability asphalt mix design framework based on binary aggregate packing	131315
Nelson, Shaun / Geddes, Daniel A. / Kearney, Sarah A. / Cockburn, Sally / Hayes, Martin / Angus, Michael J. / Cann, Gavin / Provis, John L.	Hydrate assemblage stability of calcium sulfoaluminate-belite cements with varying sulfate content	131358
Ting, Matthew Zhi Yeon / Yi, Yaolin	Influence of short-term binder-bentonite interactions on workability of sand-bentonite-binder mixture for seepage cut-off wall	131260
Azarhomayun, Fazel / Haji, Mohammad / Shekarchi, Mohammad / Kioumarsi, Mahdi	Investigating the Effectiveness of the Stable Measurement Tests of Self-Compacting Concrete	131262
Sinha, Arnab Kumar / Talukdar, Sudip	Mechanical and bond behaviour of high volume Ultrafine-slag blended fly ash based alkali activated concrete	131368
Ferrazzo, Suéllen Tonatto / Tonini de Araújo, Mariana / Bruschi, Giovani Jordi / Chaves, Helder Mansur / Pavan Korf, Eduardo / Consoli, Nilo Cesar	Mechanical and environmental behavior of waste foundry sand stabilized with alkali-activated sugar cane bagasse ash-eggshell lime binder	131313
Wang, Xianfeng / He, Quan / Huang, Yingxin / Song, Qiao / Zhang, Xiaogang / Xing, Feng	Mechanical characteristics of fiber-reinforced microcapsule self-healing cementitious composites by orthogonal tests	131377
Wu, Huixia / Hu, Ruihan / Yang, Dingyi / Ma, Zhiming	Micro-macro characterizations of mortar containing construction waste fines as replacement of cement and sand: A comparative study	131328
Faraj, Rabar H. / Mohammed, Azad A. / Omer, Khalid M.	Microstructure characteristics, stress–strain behaviour, fresh properties, and mechanical performance of recycled plastic aggregate self-compacting concrete modified with nano-silica	131371
Caron, Richard / Patel, Ravi A. / Bogner, Andreas / Dehn, Frank	Multi-scale experimental investigation and analytical micro-mechanical modeling to determine Young’s modulus of alkali-activated slag concrete	131272
Li, Wentao / Chen, Yin / Li, Runxiang / Xiao, Henglin / Li, Lihua / Yang, Jingtong	A new method for carbonating magnesia and its possible application to soil stabilization and CO2 capture	131263
Qu, Min / Wang, Fazhou / Liu, Peng / Macphee, Donald E. / Hu, Chuanlin / Yang, Lu	A novel alkali-activated cement from mineral admixture, superabsorbent polymers, and alkali-doped carboxylate glass	131459
Cheng, Can / Liu, Jian / Gong, Fangyuan / Fu, Yanrong / Cheng, Xuejiao / Qiao, Jiangang	Performance and evaluation models for different structural types of asphalt mixture using shape-stabilized phase change material	131411
Amani, Saeed / Jahangiri, Behnam / Karimi, Mohammad M.	Performance characterization of asphalt mixtures under different aging levels: A fracture-based method	131126
Jeon, Siwoo / Ju, Minkwan / Park, Jihyuk / Choi, Habeun / Park, Kyoungsoo	Prediction of concrete anchor pull-out failure using cohesive zone modeling	130993
Yu, Xiaoniu / Chu, Jian / Wu, Shifan / Wang, Kangda	Production of biocement using steel slag	131365
Kim, Kyoung-Min / Lee, Sangho / Yu, Yongjae / Cho, Jae-Yeol	Requirements of specimen dimension considering maximum coarse aggregate size for concrete split Hopkinson pressure bar tests	131359
Ji, Xin-Lin / Chen, Li-Jie / Liang, Kun / Pan, Wei / Su, Ray Kai-Leung	A review on FRP bars and supplementary cementitious materials for the next generation of sustainable and durable construction materials	131403
Daoust, K. / Begriche, A. / Claverie, J. P. / Tagnit-Hamou, A.	Self-dispersing silica fume nanoparticles: A valuable admixture for ultra high-performance concrete	131357
Zuo, Kangle / Gu, Xiaoqiang / Hu, Chao / Hu, Jing / Gao, Guangyun	Shear stiffness of sand-fines binary mixtures: Effects of sand gradation and fines content	131364
Dias, Sara / Tadeu, António / Almeida, João / António, Julieta / de Brito, Jorge	Steel-concrete bond behaviour of concrete mixes with wood waste: pull-out and bending tests of full-scale beams and columns	131343
Zhao, Bing / Wang, Guangjin / Wu, Bisheng / Kong, Xiangyun	A study on mechanical properties and permeability of steam-cured mortar with iron-copper tailings	131372
Wang, Ruiyang / Yu, Jianying / Liu, Quantao / Kuang, Dongliang / Qiu, Heping	Synergistic effect of ion chelating agent and magnesium fluorosilicate on self-repairing ability and microstructure of mortar	131375
Zuo, Peixian / Liu, Zhong / Zhang, Hua / Sivanathan, Amende / Dai, Dasong / Fan, Mizi	Thermal transformation of bamboo sawdust for its advanced cementitious composites	131395
Jiang, Zhilu / Pan, Yingjie / Fu, Chuanqing / Li, Weiwen / Wang, Yaocheng / Long, Wu-Jian	Three-dimensional pore structure characterization of cement paste by X-ray computed tomography (XCT) and focused ion beam/scanning electron microscopy (FIB/SEM)	131379
Li, Zhun / Wang, Shengyue	Transferring heat accumulated by asphalt pavement from inside to outside through carbon fibers	131314
Myskowski, Brett / de O. Lima, Arthur / Edwards, J. Riley	Under tie (sleeper) pads – A state of the art review	131239
Ahmed, Nadia	Utilizing plastic waste in the building and construction industry: A pathway towards the circular economy	131311
Lin, Chunjin / Wang, Mengya / Liu, Xiaolin / Li, Zhaofeng / Zhang, Jian / Gao, Yifan	Working performance of red mud-based grouting materials mixed with ultrafine limestone and quartz	131326

Über diese
Datenseite
IssueID
69873
Veröffentlicht am:
30.05.2023
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juni 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juni 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.