Construction and Building Materials - January 2023

Published:	January 2023

Articles in this Issue

Author(s)	Title	Page(s)
Lin, Hongwei / Chen, Feng / Zhang, Hongchao	Active luminous road markings: A comprehensive review of technologies, materials, and challenges	129811
Song, Zijian / Donkor, Saddick / Zhang, Yingjie / Liu, Qingyang / Liu, Yongqi / Na, Xu / Cai, Huanchun / Kwesi Odoom, Justice	Adsorption and corrosion inhibition performance of rice bran extract on carbon steel in aqueous chloride solution: Experimental, computational and theoretical studies	129801
Ranjan, Nikhil / Banerjee, Susanta / Nayak, Sanket / Das, Sreekanta	Agro-waste fiber reinforced mortar for augmenting the performance of masonry structures	129848
Song, Youngjae / Kim, Kwangsu / Park, Seunghee / Park, Sun-Kyu / Park, Jongho	Analysis of load-bearing capacity factors of textile-reinforced mortar using multilayer perceptron and explainable artificial intelligence	129560
Li, Jing / Luo, Mosong / Chen, Zheng / Zhuang, Ende / Yu, Bo / Chen, Ye / Nong, Yumei	Anti-corrosion mechanism of MgAl-LDHs inhibitors with varying anionic charge on reinforcing steel in simulated concrete pore solutions	129882
Diaz Caselles, Laura / Balsamo, Bastien / Benavent, Virginie / Trincal, Vincent / Lahalle, Hugo / Patapy, Cédric / Montouillout, Valérie / Cyr, Martin	Behavior of calcined clay based geopolymers under sulfuric acid attack: Meta-illite and metakaolin	129889
Zheng, Yongqian / Xiao, Yanjun / Wang, Cunhua / Li, Yonghui	Behavior of square geopolymer recycled brick aggregate concrete filled steel tubular stub columns under axial compression	129823
Ruviaro, Artur Spat / dos Santos Lima, Geannina Terezinha / Silvestro, Laura / Barraza, Madeleing Taborda / Cavalcante Rocha, Janaíde / de Brito, Jorge / Gleize, Philippe Jean Paul / Pelisser, Fernando	Characterization and investigation of the use of oat husk ash as supplementary cementitious material as partial replacement of Portland cement: Analysis of fresh and hardened properties and environmental assessment	129762
Omur, Tarik / Miyan, Nausad / Kabay, Nihat / Birol, Burak / Oktay, Didem	Characterization of ferrochrome ash and blast furnace slag based alkali-activated paste and mortar	129805
Hussein, Twana Ahmed / Dheyaaldin, Mahmood Hunar / Mosaberpanah, Mohammad Ali / Ahmed, Younus M. S. / Mohammed, Hariwan A. / Omer, Raian R. / Hamid, Saad M. / Alzeebaree, Radhwan	Chemical resistance of alkali-activated mortar with nano silica and polypropylene fiber	129847
Li, Ruisen / Zheng, Wenzhong / Tian, Weichen / Yan, Yu / Li, Guangchao	A comparative study on the crucial parameters for soundless chemical crushing efficiency of reinforced concrete shear wall: Experimental and theoretical investigation	129813
Wang, Chaohui / Li, Yanduo / Wen, Penghui / Zeng, Wei / Wang, Xinqi	A comprehensive review on mechanical properties of green controlled low strength materials	129611
EL Afandi, M. / Yehia, S. / Landolsi, T. / Qaddoumi, N. / Elchalakani, M.	Concrete-to-concrete bond Strength: A review	129820
Alizadeh, Roghayeh / Naderi, Reza / Saremi, Mohsen / Hamidi, Hoda / Shojaei, Fazel	Corrosion inhibition effect of sodium tri-polyphosphate on reinforcing steel in simulated concrete pore solution with different pHs	129819
Srinivasan, Harinei / Arumugam, Hariharan / Anto Dilip, A. / Krishnasamy, Balaji / Abdul Aleem, M. I. / Murugesan, Arun / Muthukaruppan, Alagar	Desert cotton and areca nut husk fibre reinforced hybridized bio-benzoxazine/epoxy bio-composites: Thermal, electrical and acoustic insulation applications	129870
Biolzi, Luigi / Cattaneo, Sara / Crespi, Pietro / Scamardo, Manuela / Vafa, Navid	Diagonal compression cyclic testing of unreinforced and reinforced masonry walls	129839
Lu, Zhongyu / Li, Wenkang / Zeng, Xiaoyu / Pan, Yunfeng	Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater	129845
Phiangphimai, Chattarika / Joinok, Gonganok / Phoo-ngernkham, Tanakorn / Damrongwiriyanupap, Nattapong / Hanjitsuwan, Sakonwan / Suksiripattanapong, Cherdsak / Sukontasukkul, Piti / Chindaprasirt, Prinya	Durability properties of novel coating material produced by alkali-activated/cement powder	129837
Guo, Meng / Yin, Xu / Du, Xiuli / Tan, Yiqiu	Effect of aging, testing temperature and relative humidity on adhesion between asphalt binder and mineral aggregate	129775
Mi, Tangwei / Li, Yongqiang / Liu, W. / Dong, Z. / Gong, Q. / Min, C. / Xing, F. / Wang, Yaocheng / Chu, S. H.	The effect of carbonation on chloride redistribution and corrosion of steel reinforcement	129641
Safdar, Muhammad / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Effect of connection transverse reinforcement on the behavior of GFRP-RC T-connections: Numerical investigation	129827
Wang, Sudi / Miao, Yinghao / Wang, Linbing	Effect of grain size composition on mechanical performance requirement for particles in aggregate blend based on photoelastic method	129808
Tsegaye Beyene, Markos / Kingne, Felicite / Tsangouri, Eleni / El Kadi, Michael / Demissie, Tamene Adugna / Rahier, Hubert / Van Hemelrijck, Danny / Tysmans, Tine	Effect of matrix modification on the durability of cementitious composites reinforced with aligned Ensete fibre	129706
Zhai, Shengtian / Zhou, Xudong / Zhang, Yunsheng / Pang, Bo / Liu, Guojian / Zhang, Lihua / Yang, Lin / Liu, Zhiyong / Liu, Laibao	Effect of multifunctional modification of waste rubber powder on the workability and mechanical behavior of cement-based materials	129880
Wang, Haoyu / Nie, Ding / Li, Pengfei / Wang, Duoyin / Wang, Chengzhi / Liu, Wei / Du, Sanlin	Effect of recycled concrete aggregate with different degrees of initial alkali–aggregate reaction damage on the mechanical behavior and porosity of self-compacting recycled aggregate concrete	129797
Henao Rios, Laura M. / Hoyos Triviño, Andry F. / Villaquirán-Caicedo, Mónica A. / Mejía de Gutiérrez, Ruby	Effect of the use of waste glass (as precursor, and alkali activator) in the manufacture of geopolymer rendering mortars and architectural tiles	129760
Uysal, Mucteba / Kuranlı, Ömer Faruk / Aygörmez, Yurdakul / Canpolat, Orhan / Cosgun, Turgay	The effect of various fibers on the red mud additive sustainable geopolymer composites	129864
Boğa, Ahmet Raif / Ferdi Şenol, Ahmet	The effect of waste marble and basalt aggregates on the fresh and hardened properties of high strength self-compacting concrete	129715
Chen, Long / Chen, Jinjie / Wang, Jianxi / Cai, Jiasheng / Li, Yang	Effects of joint stiffness degradation on vertical stability of CRTSII slab ballastless track	129812
Sarıdemir, Mustafa / Çelikten, Serhat	Effects of Ms modulus, Na concentration and fly ash content on properties of vapour-cured geopolymer mortars exposed to high temperatures	129868
Liu, Tianle / Gong, Cheng / Duan, Longchen / Qu, Bo	Effects of sodium citrate on compressive strength and microstructure of NaOH-activated fly ash/slag cement exposed to high temperature	129852
Hung, Chang-Chi / Wang, Wei-Chien / Wang, Her-Yung / Lin, Kun-Hao	Engineering properties and durability of cement mortar with environmental cement and waste liquid crystal glass	129727
Liang, Chen / Zhao, Piqi / Xie, Ning / Wang, Shoude / Huang, Yongbo / Lu, Lingchao / Cheng, Xin	Enhanced comprehensive performance of polymer-CSA cement coating with graphene oxide	129885
Komkova, Anastasija / Habert, Guillaume	Environmental impact assessment of alkali-activated materials: Examining impacts of variability in constituent production processes and transportation	129032
D'Antino, Tommaso / Calabrese, Angelo Savio / Colombi, Pierluigi / Poggi, Carlo	Experimental and numerical investigation on the tensile behavior of PBO FRCM composites with textile lap splice	129437
Luo, Zhicheng / Li, Qiyu / Xu, Congbai / Hu, Hao / Zhang, Dachang / Han, Xingning	Experimental and theoretical investigations on axial bearing capacity of steel angle members with local corrosion on their limb peaks	129862
Bruno, Marco / Tataranni, Piergiorgio / Sangiorgi, Cesare	Experimental application of fully recycled asphalt concretes produced with chemical additives for patch pavement rehabilitation	129807
Liang, Siming / Du, He / Liu, Yuhang / Chen, Yuxuan / Liu, Jiankun / Wei, Ya	Experimental study and mesoscale finite element modeling of elastic modulus and flexural creep of steel fiber-reinforced mortar	129875
Leng, Yubing / Xu, Qingfeng / Wang, Mingqian / Guo, Hongyuan / Harries, Kent A. / Chen, Lingzhu	Experimental study of withdrawal behavior of self-tapping screws in laminated bamboo	129890
Peng, Yizhan / Gong, Fuyuan / Wang, Zhao / Zhao, Yuxi / Jin, Weiliang / Meng, Tao / Maekawa, Koichi	Experimental study on time-dependent DC resistivity of cement-based material considering microstructure and ion concentration	129830
He, Chao / Zhou, Shunhua / Li, Xiaoxin / Di, Honggui / Zhang, Xiaohui	Forest trees as a natural metamaterial for surface wave attenuation in stratified soils	129769
Bespalhuk, Ketholyn J. / de Oliveira, Tiego J. C. / Valverde, João V. P. / Gonçalves, Rhudyeris A. / Ferreira-Neto, Lucas / Souto, Paula C. S. / Silva, Josmary R. / de Souza, Nara C.	Fractal analysis of microstructures in Portland cement pastes – Effect of curing conditions	129881
Perna, Ivana / Hanzlicek, Tomas / Lučaník, Adam / Šupová, Monika	Geopolymer-based grinding stones utilizable in metal machining	129869
Fleury, Mateus P. / Lima, Mateus A. / Santos, Eder C. G. / Lopes, Maria L. C. / Lins da Silva, Jefferson	Geotextile resistance to cyclic and static loading damage when impregnated with asphalt emulsion	129738
Matos, Ana Mafalda / Granja, José / Nunes, Sandra / Barroso-Aguiar, José L. / Azenha, Miguel	Hardening characterisation of a non-proprietary and more eco-friendly UHPC	129803
Bayraktar, Oguzhan Yavuz / Tobbala, Dina E. / Turkoglu, Mesut / Kaplan, Gökhan / Tayeh, Bassam A.	Hemp fiber reinforced one-part alkali-activated composites with expanded perlite: Mechanical properties, microstructure analysis and high-temperature resistance	129716
Lu, Weiwei / Peng, Xinghai / Lv, Songtao / Yang, Yi / Wang, Jinping / Wang, Ziyang / Xie, Nasi	High-temperature properties and aging resistance of rock asphalt ash modified asphalt based on rutting index	129774
Zhang, Shaofeng / Niu, Ditao	Hydration and mechanical properties of cement-steel slag system incorporating different activators	129981
Yu, Shuyang / Sun, Zhaohua / Yu, Jun / Yang, Jie / Zhu, Chenhui	An improved meshless method for modeling the mesoscale cracking processes of concrete containing random aggregates and initial defects	129770
Sun, Jieyu / Lin, Xiuyi / Qiu, Yuhan / Wang, Runyu / Zhang, Yanfei / Hu, Chuanshuang / Zhang, Weiwei	In situ polymerization of N-methylol acrylamide (NMA) for bamboo anti-mold modification	129887
Pająk, Małgorzata / Janiszewski, Jacek	Influence of aggregate and recycled steel fibres on the strain rate sensitivity of mortar and concrete	129855
Zhang, Qian / Ye, Weimin / Liu, Zhangrong / Wang, Qiong / Chen, Yonggui	Influence of injection methods on calcareous sand cementation by EICP technique	129724
Ban Cheah, Chee / Liew, Jia Jia / Kevin, Khaw Le Ping / Siddique, Rafat / Tangchirapat, Weerachart	Influence of milling parameters on the properties of ground coal bottom ash and its blended cement	129745
Rubin, Ariane Prevedello / Quintanilha, Lucas Carvalho / Longuini Repette, Wellington	Influence of structuration rate, with hydration accelerating admixture, on the physical and mechanical properties of concrete for 3D printing	129826
Gao, Song / Guo, Xin / Ban, Shunli / Ma, Yanxuan / Yu, Qi / Sui, Shiyu	Influence of supplementary cementitious materials on ITZ characteristics of recycled concrete	129736
Xu, Ning / Wang, Hainian / Chen, Yu / Hossiney, Nabil / Ma, Ziye / Wang, Huimin	Insight into the effects of waste vegetable oil on self-healing behavior of bitumen binder	129888
He, Song-song / Jiao, Chu-Jie / Li, Song	Investigation of mechanical strength and permeability characteristics of pervious concrete mixed with coral aggregate and seawater	129508
He, Sihong / Huang, Renle / Xiao, Longfei / Xiao, Liang / Mei, Guoxiong	Investigation of the reverse-seepage technique to enhance the chloride ion invasion resistance of rectangular section concrete: Experiments and numerical analysis	129743
Wu, Jia-Qi / Li, Bo / Chen, Yung-Tsang / Ghiassi, Bahman	Investigation on the roles of glass sand in sustainable engineered geopolymer composites	129576
Methode Kalombe, Rosicky / Sobhansarbandi, Sarvenaz / Kevern, John	Low-cost phase change materials based concrete for reducing deicing needs	129129
Mercedes, Luis / Castellazzi, Giovanni / Bernat-Maso, Ernest / Gil, Lluís	Matrix and fabric contribution on the tensile behaviour of fabric reinforced cementitious matrix composites	129693
Nair, Sooraj A. O. / Mohandoss, Prabha / Ram, Kiran / Adnan, Tayyab / Pillai, Radhakrishna G.	Mechanical characteristics of Quenched and Self-Tempered (QST or TMT) steel reinforcing bars used in concrete structures	129761
Xie, Jian / Xi, Rong / Tong, Chenglong / Yan, Jia-Bao	Mechanical properties of Q235∼Q460 mild steels at low temperatures	129850
Arias-Trujillo, Juana / Matias-Sanchez, Agustin / Cantero, Blas / López-Querol, Susana	Mechanical stabilization of aeolian sand with ceramic brick waste aggregates	129846
Miah, Md Jihad / Li, Ye / Chandra Paul, Suvash / Babafemi, Adewumi John / Jang, Jeong Gook	Mechanical strength, shrinkage, and porosity of mortar reinforced with areca nut husk fibers	129688
He, Yan / Kang, Qian / Lan, Ming / Peng, Huaide	Mechanism and assessment of the pozzolanic activity of melting-quenching lithium slag modified with MgO	129692
Khoshroo, Moein / Ghoddousi, Parviz	Minimizing the negative impacts of rebar stored in the Persian Gulf on reinforced concrete corrosion	129749
Shi, Jiashun / Chun, Qing / Zhang, Yunsheng / Wang, Dafu / Liu, Zhiyong / Jin, Hui / Liu, Cheng / Liu, Guojian / Qian, Rusheng	Modified random hierarchical bundle model for predicting gas permeability of cement-based materials	129859
Nwankwo, Chinyere O. / Mahachi, Jeffrey / Olukanni, David O. / Musonda, Innocent	Natural fibres and biopolymers in FRP composites for strengthening concrete structures: A mixed review	129661
Tu, Xi / Wu, Ye	Numerical analysis on corrosion and mechanical performance of shear stud connector in concrete	129816
Vantadori, Sabrina / Colpo, Angélica B. / Friedrich, Leandro F. / Iturrioz, Ignacio	Numerical simulation of the shear strength of the shot-earth 772-granite interface	129450
Belarmin Xavier, C. S. / Rahim, A. Abdul	Optimization and characterization of the ternary blended iron rich natural binder concrete system	129838
Xie, Tingting / Wang, Linbing	Optimize the design by evaluating the performance of asphalt mastic reinforced with different basalt fiber lengths and contents	129698
Wang, Yukui / He, Zhenxing / Cao, Ziyong / Su, Cheng / Bao, Nengneng	Parameter optimization of a new cone-oriented elastic side-supporting long sleeper damping track: Experiment and simulation	129821
Liu, Fuqiang / Yang, Sanqiang / Sun, Qiaohong	Performance evaluation of Xinjiang Tianzhize 90A road petroleum asphalt and mixture	129810
Wang, Bingwen / Li, Qianlong / Dong, Pingbo / Gan, Su / Yang, Lei / Wang, Ruizhong	Performance investigation of blast furnace slag based cemented paste backfill under low temperature and low atmospheric pressure	129744
Yousefi, Afshar A. / Haghshenas, Hamzeh F. / Shane Underwood, Benjamin / Harvey, John / Blankenship, Phillip	Performance of warm asphalt mixtures containing reclaimed asphalt pavement, an anti-stripping agent, and recycling agents: A study using a balanced mix design approach	129633
Deng, Gao / He, Yongjia / Lu, Linnu / Wang, Fazhou / Hu, Shuguang	Pore structure evolution and sulfate attack of high-volume slag blended mortars under standard curing and steam curing	129878
Al-Sabaeei, Abdulnaser M. / Alhussian, Hitham / Jadid Abdulkadir, Said / Giustozzi, Filippo / Jakarni, Fauzan Mohd / Yusoff, Nur Izzi Md	Predicting the rutting parameters of nanosilica/waste denim fiber composite asphalt binders using the response surface methodology and machine learning methods	129871
Kim, Jong-Chan / Lim, Woo-Young	Prediction of compressive strength and elastic modulus for ultra-high-performance concrete	129883
Liu, Yanchen / Zheng, Peiping / Wu, Huijun / Zhang, Yuhui	Preparation and dynamic moisture adsorption of fiber felt/silica aerogel composites with ultra-low moisture adsorption rate	129825
Xian, Xiangping / Mahoutian, Mehrdad / Shao, Yixin	Production of concrete pipes by carbonation curing in an inflatable enclosure	129861
Liu, Ruiwen / Fan, Junhao / Yu, Xiaotong / Zhu, Yunpeng / Chen, Da	Properties of mortar containing polyvinyl alcohol pretreated waste oyster shells with various concentrations	129879
Zeng, X. / Huo, J. S.	Rate-dependent constitutive model of high-strength reinforcing steel HTRB600E in tension	129824
He, Wentao / Zhao, Zifeng / Yuan, Jie / Xiao, Feipeng	Recent development of ethylene–vinyl acetate modified asphalt	129800
Abe, Abraham A. / Oliviero Rossi, Cesare / Eskandarsefat, Shahin / Porto, Michele / Loise, Valeria / Venturini, Loretta / Caputo, Paolino	Reclaimed asphalt recycling agents: Looking into the blueprint of their mechanisms of action	129843
Dai, Bei-Bing / Liu, Qi / Mao, Xiang / Li, Pei-Yu / Liang, Zhen-Zi	A reinterpretation of the mechanical behavior of rubber-sand mixtures in direct shear testing	129771
Guo, Hui / Wang, Jiahao / Xu, Sihan / Wu, Jingting	Research on the intelligent detection technology of multi-objective coarse aggregates	129273
Zhang, Yaxiong / Wang, Chengwen / Chen, Zehua / Yu, Yongjin / Jing, Jianzhou / Xia, Xiujian / Liu, Huiting / Meng, Renzhou	Research on the strength retrogression and mechanism of oil well cement at high temperature (240 ℃)	129806
Qing, Longbang / Sun, Honglei / Zhang, Yuebo / Mu, Ru / Bi, Mengdi	Research progress on aligned fiber reinforced cement-based composites	129578
Wang, Ziyan / Shui, Zhonghe / Sun, Tao / Hu, Teng / Xiao, Xiangyu / Fan, Jun	Reutilization of gangue wastes in phosphogypsum-based excess-sulphate cementitious materials: Effects of wet co-milling on the rheology, hydration and strength development	129778
Faysal, Rayhan Md / Bhuiyan, Md Mehedi Hassan / Momin, Khondhaker Al / Tafsirojjaman, T. / Liu, Yue	A review on the advances of the study on FRP-Concrete bond under hygrothermal exposure	129818
Miao, Wei / Guo, Zi-Xiong / Ye, Yong / Basha, Syed Humayun	Shear behavior of composite stone beams reinforced with NSM longitudinal CFRP bars	129802
Hasan, Md Abul / Akiyama, Mitsuyoshi / Kojima, Keisuke / Izumi, Naoki	Shear behavior of reinforced concrete beams repaired using a hybrid scheme with stainless steel rebars and CFRP sheets	129817
Choi, Jin-Seok / Lee, Ho-Jin / Yuan, Tian-Feng / Yoon, Young-Soo	Shear strength of steel fiber reinforced lightweight self-consolidating concrete joints under monotonic and cyclic loading	129829
Yang, Zhiyuan / Zhu, Hong / Zhang, Bai / Dong, Zhiqiang / Wu, Peng	Short-term creep behaviors of seawater sea-sand coral aggregate concrete: An experimental study with Rheological model and neural network	129786
Kuchiishi, A. Kazuo / Lee, Kangjin “Caleb” / Underwood, B. Shane	Simplified protocol for fatigue cracking characterization of asphalt mixtures using the direct tension cyclic fatigue test	129828
Abdulla, Nwzad Abduljabar	A state-of art-review of materials, methods, and applications of PVC-FRP-confined concrete	129719
Ruiz, Daniel M. / Barrera, Natalia / Reyes, Juan C. / Restrepo, Manuela / Alvarado, Yezid A. / Lozada, Mario / Vacca, Hermes A.	Strengthening of historical earthen constructions with steel plates: Full-scale test of a two-story wall subjected to in-plane lateral load	129877
Zhang, Qin / Yang, Qiao-Chu / Gu, Xiang-Lin / Jiang, Yong	Study on axial compression properties of concrete columns wrapped with basalt textile-reinforced fine concrete (BTRC) jackets	129809
Hou, Shijun / Liang, Shufeng / Liu, Dianshu	Study on dynamic mechanical properties and constitutive model of granite under constant strain rate loading	129975
Liu, Biao / Zhang, Bo / Wang, Zheng-Zhong / Bai, Guo-liang	Study on the stress–strain full curve of recycled coarse aggregate concrete under uniaxial compression	129884
Lai, Junying / Bi, Yutian / Zhou, Yifan / Qian, Kuangliang / Qian, Xiaoqian / Zeng, Xianhua / Zhu, Qiaoyong / Yu, Feiyu / Ruan, Shaoqin	Synthesis and characterization of a new super absorbent polymer (SAP) via the use of low-grade kaolin through inverse suspension polymerization	129849
Li, Cong / Chen, Baochun / Sennah, Khaled	Tensile test of headed stud in steel-UHPC composite slab	129686
Su, Yi / Tang, Shan / Cai, Meng / Nie, Yu / Hu, Bo / Wu, Shujuan / Cheng, Cheng	Thermal oxidative aging mechanism of lignin modified bitumen	129863
Ma, Jianmin / Nivitha, M. R. / Hesp, Simon A. M. / Murali Krishnan, J.	Validation of empirical changes to asphalt specifications based on phase angle and relaxation properties using data from a northern Ontario, Canada pavement trial	129776
Dai, Fukuan / Wang, Ziwei / Wang, Hankun / Zhang, Wenfu / Zhong, Tuhua / Tian, Genlin	Vascular bundle characteristics and mechanical properties of Dendrocalamus sinicus	129858

About this
data sheet
IssueID
68679
Published on:
10/12/2022
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - January 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - January 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.