Construction and Building Materials - janvier 2023

Publié:	janvier 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Lin, Hongwei / Chen, Feng / Zhang, Hongchao	Active luminous road markings: A comprehensive review of technologies, materials, and challenges	129811
Song, Zijian / Donkor, Saddick / Zhang, Yingjie / Liu, Qingyang / Liu, Yongqi / Na, Xu / Cai, Huanchun / Kwesi Odoom, Justice	Adsorption and corrosion inhibition performance of rice bran extract on carbon steel in aqueous chloride solution: Experimental, computational and theoretical studies	129801
Ranjan, Nikhil / Banerjee, Susanta / Nayak, Sanket / Das, Sreekanta	Agro-waste fiber reinforced mortar for augmenting the performance of masonry structures	129848
Song, Youngjae / Kim, Kwangsu / Park, Seunghee / Park, Sun-Kyu / Park, Jongho	Analysis of load-bearing capacity factors of textile-reinforced mortar using multilayer perceptron and explainable artificial intelligence	129560
Li, Jing / Luo, Mosong / Chen, Zheng / Zhuang, Ende / Yu, Bo / Chen, Ye / Nong, Yumei	Anti-corrosion mechanism of MgAl-LDHs inhibitors with varying anionic charge on reinforcing steel in simulated concrete pore solutions	129882
Diaz Caselles, Laura / Balsamo, Bastien / Benavent, Virginie / Trincal, Vincent / Lahalle, Hugo / Patapy, Cédric / Montouillout, Valérie / Cyr, Martin	Behavior of calcined clay based geopolymers under sulfuric acid attack: Meta-illite and metakaolin	129889
Zheng, Yongqian / Xiao, Yanjun / Wang, Cunhua / Li, Yonghui	Behavior of square geopolymer recycled brick aggregate concrete filled steel tubular stub columns under axial compression	129823
Ruviaro, Artur Spat / dos Santos Lima, Geannina Terezinha / Silvestro, Laura / Barraza, Madeleing Taborda / Cavalcante Rocha, Janaíde / de Brito, Jorge / Gleize, Philippe Jean Paul / Pelisser, Fernando	Characterization and investigation of the use of oat husk ash as supplementary cementitious material as partial replacement of Portland cement: Analysis of fresh and hardened properties and environmental assessment	129762
Omur, Tarik / Miyan, Nausad / Kabay, Nihat / Birol, Burak / Oktay, Didem	Characterization of ferrochrome ash and blast furnace slag based alkali-activated paste and mortar	129805
Hussein, Twana Ahmed / Dheyaaldin, Mahmood Hunar / Mosaberpanah, Mohammad Ali / Ahmed, Younus M. S. / Mohammed, Hariwan A. / Omer, Raian R. / Hamid, Saad M. / Alzeebaree, Radhwan	Chemical resistance of alkali-activated mortar with nano silica and polypropylene fiber	129847
Li, Ruisen / Zheng, Wenzhong / Tian, Weichen / Yan, Yu / Li, Guangchao	A comparative study on the crucial parameters for soundless chemical crushing efficiency of reinforced concrete shear wall: Experimental and theoretical investigation	129813
Wang, Chaohui / Li, Yanduo / Wen, Penghui / Zeng, Wei / Wang, Xinqi	A comprehensive review on mechanical properties of green controlled low strength materials	129611
EL Afandi, M. / Yehia, S. / Landolsi, T. / Qaddoumi, N. / Elchalakani, M.	Concrete-to-concrete bond Strength: A review	129820
Alizadeh, Roghayeh / Naderi, Reza / Saremi, Mohsen / Hamidi, Hoda / Shojaei, Fazel	Corrosion inhibition effect of sodium tri-polyphosphate on reinforcing steel in simulated concrete pore solution with different pHs	129819
Srinivasan, Harinei / Arumugam, Hariharan / Anto Dilip, A. / Krishnasamy, Balaji / Abdul Aleem, M. I. / Murugesan, Arun / Muthukaruppan, Alagar	Desert cotton and areca nut husk fibre reinforced hybridized bio-benzoxazine/epoxy bio-composites: Thermal, electrical and acoustic insulation applications	129870
Biolzi, Luigi / Cattaneo, Sara / Crespi, Pietro / Scamardo, Manuela / Vafa, Navid	Diagonal compression cyclic testing of unreinforced and reinforced masonry walls	129839
Lu, Zhongyu / Li, Wenkang / Zeng, Xiaoyu / Pan, Yunfeng	Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater	129845
Phiangphimai, Chattarika / Joinok, Gonganok / Phoo-ngernkham, Tanakorn / Damrongwiriyanupap, Nattapong / Hanjitsuwan, Sakonwan / Suksiripattanapong, Cherdsak / Sukontasukkul, Piti / Chindaprasirt, Prinya	Durability properties of novel coating material produced by alkali-activated/cement powder	129837
Guo, Meng / Yin, Xu / Du, Xiuli / Tan, Yiqiu	Effect of aging, testing temperature and relative humidity on adhesion between asphalt binder and mineral aggregate	129775
Mi, Tangwei / Li, Yongqiang / Liu, W. / Dong, Z. / Gong, Q. / Min, C. / Xing, F. / Wang, Yaocheng / Chu, S. H.	The effect of carbonation on chloride redistribution and corrosion of steel reinforcement	129641
Safdar, Muhammad / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Effect of connection transverse reinforcement on the behavior of GFRP-RC T-connections: Numerical investigation	129827
Wang, Sudi / Miao, Yinghao / Wang, Linbing	Effect of grain size composition on mechanical performance requirement for particles in aggregate blend based on photoelastic method	129808
Tsegaye Beyene, Markos / Kingne, Felicite / Tsangouri, Eleni / El Kadi, Michael / Demissie, Tamene Adugna / Rahier, Hubert / Van Hemelrijck, Danny / Tysmans, Tine	Effect of matrix modification on the durability of cementitious composites reinforced with aligned Ensete fibre	129706
Zhai, Shengtian / Zhou, Xudong / Zhang, Yunsheng / Pang, Bo / Liu, Guojian / Zhang, Lihua / Yang, Lin / Liu, Zhiyong / Liu, Laibao	Effect of multifunctional modification of waste rubber powder on the workability and mechanical behavior of cement-based materials	129880
Wang, Haoyu / Nie, Ding / Li, Pengfei / Wang, Duoyin / Wang, Chengzhi / Liu, Wei / Du, Sanlin	Effect of recycled concrete aggregate with different degrees of initial alkali–aggregate reaction damage on the mechanical behavior and porosity of self-compacting recycled aggregate concrete	129797
Henao Rios, Laura M. / Hoyos Triviño, Andry F. / Villaquirán-Caicedo, Mónica A. / Mejía de Gutiérrez, Ruby	Effect of the use of waste glass (as precursor, and alkali activator) in the manufacture of geopolymer rendering mortars and architectural tiles	129760
Uysal, Mucteba / Kuranlı, Ömer Faruk / Aygörmez, Yurdakul / Canpolat, Orhan / Cosgun, Turgay	The effect of various fibers on the red mud additive sustainable geopolymer composites	129864
Boğa, Ahmet Raif / Ferdi Şenol, Ahmet	The effect of waste marble and basalt aggregates on the fresh and hardened properties of high strength self-compacting concrete	129715
Chen, Long / Chen, Jinjie / Wang, Jianxi / Cai, Jiasheng / Li, Yang	Effects of joint stiffness degradation on vertical stability of CRTSII slab ballastless track	129812
Sarıdemir, Mustafa / Çelikten, Serhat	Effects of Ms modulus, Na concentration and fly ash content on properties of vapour-cured geopolymer mortars exposed to high temperatures	129868
Liu, Tianle / Gong, Cheng / Duan, Longchen / Qu, Bo	Effects of sodium citrate on compressive strength and microstructure of NaOH-activated fly ash/slag cement exposed to high temperature	129852
Hung, Chang-Chi / Wang, Wei-Chien / Wang, Her-Yung / Lin, Kun-Hao	Engineering properties and durability of cement mortar with environmental cement and waste liquid crystal glass	129727
Liang, Chen / Zhao, Piqi / Xie, Ning / Wang, Shoude / Huang, Yongbo / Lu, Lingchao / Cheng, Xin	Enhanced comprehensive performance of polymer-CSA cement coating with graphene oxide	129885
Komkova, Anastasija / Habert, Guillaume	Environmental impact assessment of alkali-activated materials: Examining impacts of variability in constituent production processes and transportation	129032
D'Antino, Tommaso / Calabrese, Angelo Savio / Colombi, Pierluigi / Poggi, Carlo	Experimental and numerical investigation on the tensile behavior of PBO FRCM composites with textile lap splice	129437
Luo, Zhicheng / Li, Qiyu / Xu, Congbai / Hu, Hao / Zhang, Dachang / Han, Xingning	Experimental and theoretical investigations on axial bearing capacity of steel angle members with local corrosion on their limb peaks	129862
Bruno, Marco / Tataranni, Piergiorgio / Sangiorgi, Cesare	Experimental application of fully recycled asphalt concretes produced with chemical additives for patch pavement rehabilitation	129807
Liang, Siming / Du, He / Liu, Yuhang / Chen, Yuxuan / Liu, Jiankun / Wei, Ya	Experimental study and mesoscale finite element modeling of elastic modulus and flexural creep of steel fiber-reinforced mortar	129875
Leng, Yubing / Xu, Qingfeng / Wang, Mingqian / Guo, Hongyuan / Harries, Kent A. / Chen, Lingzhu	Experimental study of withdrawal behavior of self-tapping screws in laminated bamboo	129890
Peng, Yizhan / Gong, Fuyuan / Wang, Zhao / Zhao, Yuxi / Jin, Weiliang / Meng, Tao / Maekawa, Koichi	Experimental study on time-dependent DC resistivity of cement-based material considering microstructure and ion concentration	129830
He, Chao / Zhou, Shunhua / Li, Xiaoxin / Di, Honggui / Zhang, Xiaohui	Forest trees as a natural metamaterial for surface wave attenuation in stratified soils	129769
Bespalhuk, Ketholyn J. / de Oliveira, Tiego J. C. / Valverde, João V. P. / Gonçalves, Rhudyeris A. / Ferreira-Neto, Lucas / Souto, Paula C. S. / Silva, Josmary R. / de Souza, Nara C.	Fractal analysis of microstructures in Portland cement pastes – Effect of curing conditions	129881
Perna, Ivana / Hanzlicek, Tomas / Lučaník, Adam / Šupová, Monika	Geopolymer-based grinding stones utilizable in metal machining	129869
Fleury, Mateus P. / Lima, Mateus A. / Santos, Eder C. G. / Lopes, Maria L. C. / Lins da Silva, Jefferson	Geotextile resistance to cyclic and static loading damage when impregnated with asphalt emulsion	129738
Matos, Ana Mafalda / Granja, José / Nunes, Sandra / Barroso-Aguiar, José L. / Azenha, Miguel	Hardening characterisation of a non-proprietary and more eco-friendly UHPC	129803
Bayraktar, Oguzhan Yavuz / Tobbala, Dina E. / Turkoglu, Mesut / Kaplan, Gökhan / Tayeh, Bassam A.	Hemp fiber reinforced one-part alkali-activated composites with expanded perlite: Mechanical properties, microstructure analysis and high-temperature resistance	129716
Lu, Weiwei / Peng, Xinghai / Lv, Songtao / Yang, Yi / Wang, Jinping / Wang, Ziyang / Xie, Nasi	High-temperature properties and aging resistance of rock asphalt ash modified asphalt based on rutting index	129774
Zhang, Shaofeng / Niu, Ditao	Hydration and mechanical properties of cement-steel slag system incorporating different activators	129981
Yu, Shuyang / Sun, Zhaohua / Yu, Jun / Yang, Jie / Zhu, Chenhui	An improved meshless method for modeling the mesoscale cracking processes of concrete containing random aggregates and initial defects	129770
Sun, Jieyu / Lin, Xiuyi / Qiu, Yuhan / Wang, Runyu / Zhang, Yanfei / Hu, Chuanshuang / Zhang, Weiwei	In situ polymerization of N-methylol acrylamide (NMA) for bamboo anti-mold modification	129887
Pająk, Małgorzata / Janiszewski, Jacek	Influence of aggregate and recycled steel fibres on the strain rate sensitivity of mortar and concrete	129855
Zhang, Qian / Ye, Weimin / Liu, Zhangrong / Wang, Qiong / Chen, Yonggui	Influence of injection methods on calcareous sand cementation by EICP technique	129724
Ban Cheah, Chee / Liew, Jia Jia / Kevin, Khaw Le Ping / Siddique, Rafat / Tangchirapat, Weerachart	Influence of milling parameters on the properties of ground coal bottom ash and its blended cement	129745
Rubin, Ariane Prevedello / Quintanilha, Lucas Carvalho / Longuini Repette, Wellington	Influence of structuration rate, with hydration accelerating admixture, on the physical and mechanical properties of concrete for 3D printing	129826
Gao, Song / Guo, Xin / Ban, Shunli / Ma, Yanxuan / Yu, Qi / Sui, Shiyu	Influence of supplementary cementitious materials on ITZ characteristics of recycled concrete	129736
Xu, Ning / Wang, Hainian / Chen, Yu / Hossiney, Nabil / Ma, Ziye / Wang, Huimin	Insight into the effects of waste vegetable oil on self-healing behavior of bitumen binder	129888
He, Song-song / Jiao, Chu-Jie / Li, Song	Investigation of mechanical strength and permeability characteristics of pervious concrete mixed with coral aggregate and seawater	129508
He, Sihong / Huang, Renle / Xiao, Longfei / Xiao, Liang / Mei, Guoxiong	Investigation of the reverse-seepage technique to enhance the chloride ion invasion resistance of rectangular section concrete: Experiments and numerical analysis	129743
Wu, Jia-Qi / Li, Bo / Chen, Yung-Tsang / Ghiassi, Bahman	Investigation on the roles of glass sand in sustainable engineered geopolymer composites	129576
Methode Kalombe, Rosicky / Sobhansarbandi, Sarvenaz / Kevern, John	Low-cost phase change materials based concrete for reducing deicing needs	129129
Mercedes, Luis / Castellazzi, Giovanni / Bernat-Maso, Ernest / Gil, Lluís	Matrix and fabric contribution on the tensile behaviour of fabric reinforced cementitious matrix composites	129693
Nair, Sooraj A. O. / Mohandoss, Prabha / Ram, Kiran / Adnan, Tayyab / Pillai, Radhakrishna G.	Mechanical characteristics of Quenched and Self-Tempered (QST or TMT) steel reinforcing bars used in concrete structures	129761
Xie, Jian / Xi, Rong / Tong, Chenglong / Yan, Jia-Bao	Mechanical properties of Q235∼Q460 mild steels at low temperatures	129850
Arias-Trujillo, Juana / Matias-Sanchez, Agustin / Cantero, Blas / López-Querol, Susana	Mechanical stabilization of aeolian sand with ceramic brick waste aggregates	129846
Miah, Md Jihad / Li, Ye / Chandra Paul, Suvash / Babafemi, Adewumi John / Jang, Jeong Gook	Mechanical strength, shrinkage, and porosity of mortar reinforced with areca nut husk fibers	129688
He, Yan / Kang, Qian / Lan, Ming / Peng, Huaide	Mechanism and assessment of the pozzolanic activity of melting-quenching lithium slag modified with MgO	129692
Khoshroo, Moein / Ghoddousi, Parviz	Minimizing the negative impacts of rebar stored in the Persian Gulf on reinforced concrete corrosion	129749
Shi, Jiashun / Chun, Qing / Zhang, Yunsheng / Wang, Dafu / Liu, Zhiyong / Jin, Hui / Liu, Cheng / Liu, Guojian / Qian, Rusheng	Modified random hierarchical bundle model for predicting gas permeability of cement-based materials	129859
Nwankwo, Chinyere O. / Mahachi, Jeffrey / Olukanni, David O. / Musonda, Innocent	Natural fibres and biopolymers in FRP composites for strengthening concrete structures: A mixed review	129661
Tu, Xi / Wu, Ye	Numerical analysis on corrosion and mechanical performance of shear stud connector in concrete	129816
Vantadori, Sabrina / Colpo, Angélica B. / Friedrich, Leandro F. / Iturrioz, Ignacio	Numerical simulation of the shear strength of the shot-earth 772-granite interface	129450
Belarmin Xavier, C. S. / Rahim, A. Abdul	Optimization and characterization of the ternary blended iron rich natural binder concrete system	129838
Xie, Tingting / Wang, Linbing	Optimize the design by evaluating the performance of asphalt mastic reinforced with different basalt fiber lengths and contents	129698
Wang, Yukui / He, Zhenxing / Cao, Ziyong / Su, Cheng / Bao, Nengneng	Parameter optimization of a new cone-oriented elastic side-supporting long sleeper damping track: Experiment and simulation	129821
Liu, Fuqiang / Yang, Sanqiang / Sun, Qiaohong	Performance evaluation of Xinjiang Tianzhize 90A road petroleum asphalt and mixture	129810
Wang, Bingwen / Li, Qianlong / Dong, Pingbo / Gan, Su / Yang, Lei / Wang, Ruizhong	Performance investigation of blast furnace slag based cemented paste backfill under low temperature and low atmospheric pressure	129744
Yousefi, Afshar A. / Haghshenas, Hamzeh F. / Shane Underwood, Benjamin / Harvey, John / Blankenship, Phillip	Performance of warm asphalt mixtures containing reclaimed asphalt pavement, an anti-stripping agent, and recycling agents: A study using a balanced mix design approach	129633
Deng, Gao / He, Yongjia / Lu, Linnu / Wang, Fazhou / Hu, Shuguang	Pore structure evolution and sulfate attack of high-volume slag blended mortars under standard curing and steam curing	129878
Al-Sabaeei, Abdulnaser M. / Alhussian, Hitham / Jadid Abdulkadir, Said / Giustozzi, Filippo / Jakarni, Fauzan Mohd / Yusoff, Nur Izzi Md	Predicting the rutting parameters of nanosilica/waste denim fiber composite asphalt binders using the response surface methodology and machine learning methods	129871
Kim, Jong-Chan / Lim, Woo-Young	Prediction of compressive strength and elastic modulus for ultra-high-performance concrete	129883
Liu, Yanchen / Zheng, Peiping / Wu, Huijun / Zhang, Yuhui	Preparation and dynamic moisture adsorption of fiber felt/silica aerogel composites with ultra-low moisture adsorption rate	129825
Xian, Xiangping / Mahoutian, Mehrdad / Shao, Yixin	Production of concrete pipes by carbonation curing in an inflatable enclosure	129861
Liu, Ruiwen / Fan, Junhao / Yu, Xiaotong / Zhu, Yunpeng / Chen, Da	Properties of mortar containing polyvinyl alcohol pretreated waste oyster shells with various concentrations	129879
Zeng, X. / Huo, J. S.	Rate-dependent constitutive model of high-strength reinforcing steel HTRB600E in tension	129824
He, Wentao / Zhao, Zifeng / Yuan, Jie / Xiao, Feipeng	Recent development of ethylene–vinyl acetate modified asphalt	129800
Abe, Abraham A. / Oliviero Rossi, Cesare / Eskandarsefat, Shahin / Porto, Michele / Loise, Valeria / Venturini, Loretta / Caputo, Paolino	Reclaimed asphalt recycling agents: Looking into the blueprint of their mechanisms of action	129843
Dai, Bei-Bing / Liu, Qi / Mao, Xiang / Li, Pei-Yu / Liang, Zhen-Zi	A reinterpretation of the mechanical behavior of rubber-sand mixtures in direct shear testing	129771
Guo, Hui / Wang, Jiahao / Xu, Sihan / Wu, Jingting	Research on the intelligent detection technology of multi-objective coarse aggregates	129273
Zhang, Yaxiong / Wang, Chengwen / Chen, Zehua / Yu, Yongjin / Jing, Jianzhou / Xia, Xiujian / Liu, Huiting / Meng, Renzhou	Research on the strength retrogression and mechanism of oil well cement at high temperature (240 ℃)	129806
Qing, Longbang / Sun, Honglei / Zhang, Yuebo / Mu, Ru / Bi, Mengdi	Research progress on aligned fiber reinforced cement-based composites	129578
Wang, Ziyan / Shui, Zhonghe / Sun, Tao / Hu, Teng / Xiao, Xiangyu / Fan, Jun	Reutilization of gangue wastes in phosphogypsum-based excess-sulphate cementitious materials: Effects of wet co-milling on the rheology, hydration and strength development	129778
Faysal, Rayhan Md / Bhuiyan, Md Mehedi Hassan / Momin, Khondhaker Al / Tafsirojjaman, T. / Liu, Yue	A review on the advances of the study on FRP-Concrete bond under hygrothermal exposure	129818
Miao, Wei / Guo, Zi-Xiong / Ye, Yong / Basha, Syed Humayun	Shear behavior of composite stone beams reinforced with NSM longitudinal CFRP bars	129802
Hasan, Md Abul / Akiyama, Mitsuyoshi / Kojima, Keisuke / Izumi, Naoki	Shear behavior of reinforced concrete beams repaired using a hybrid scheme with stainless steel rebars and CFRP sheets	129817
Choi, Jin-Seok / Lee, Ho-Jin / Yuan, Tian-Feng / Yoon, Young-Soo	Shear strength of steel fiber reinforced lightweight self-consolidating concrete joints under monotonic and cyclic loading	129829
Yang, Zhiyuan / Zhu, Hong / Zhang, Bai / Dong, Zhiqiang / Wu, Peng	Short-term creep behaviors of seawater sea-sand coral aggregate concrete: An experimental study with Rheological model and neural network	129786
Kuchiishi, A. Kazuo / Lee, Kangjin “Caleb” / Underwood, B. Shane	Simplified protocol for fatigue cracking characterization of asphalt mixtures using the direct tension cyclic fatigue test	129828
Abdulla, Nwzad Abduljabar	A state-of art-review of materials, methods, and applications of PVC-FRP-confined concrete	129719
Ruiz, Daniel M. / Barrera, Natalia / Reyes, Juan C. / Restrepo, Manuela / Alvarado, Yezid A. / Lozada, Mario / Vacca, Hermes A.	Strengthening of historical earthen constructions with steel plates: Full-scale test of a two-story wall subjected to in-plane lateral load	129877
Zhang, Qin / Yang, Qiao-Chu / Gu, Xiang-Lin / Jiang, Yong	Study on axial compression properties of concrete columns wrapped with basalt textile-reinforced fine concrete (BTRC) jackets	129809
Hou, Shijun / Liang, Shufeng / Liu, Dianshu	Study on dynamic mechanical properties and constitutive model of granite under constant strain rate loading	129975
Liu, Biao / Zhang, Bo / Wang, Zheng-Zhong / Bai, Guo-liang	Study on the stress–strain full curve of recycled coarse aggregate concrete under uniaxial compression	129884
Lai, Junying / Bi, Yutian / Zhou, Yifan / Qian, Kuangliang / Qian, Xiaoqian / Zeng, Xianhua / Zhu, Qiaoyong / Yu, Feiyu / Ruan, Shaoqin	Synthesis and characterization of a new super absorbent polymer (SAP) via the use of low-grade kaolin through inverse suspension polymerization	129849
Li, Cong / Chen, Baochun / Sennah, Khaled	Tensile test of headed stud in steel-UHPC composite slab	129686
Su, Yi / Tang, Shan / Cai, Meng / Nie, Yu / Hu, Bo / Wu, Shujuan / Cheng, Cheng	Thermal oxidative aging mechanism of lignin modified bitumen	129863
Ma, Jianmin / Nivitha, M. R. / Hesp, Simon A. M. / Murali Krishnan, J.	Validation of empirical changes to asphalt specifications based on phase angle and relaxation properties using data from a northern Ontario, Canada pavement trial	129776
Dai, Fukuan / Wang, Ziwei / Wang, Hankun / Zhang, Wenfu / Zhong, Tuhua / Tian, Genlin	Vascular bundle characteristics and mechanical properties of Dendrocalamus sinicus	129858

Informations
sur cette fiche
IssueID
68679
Publié(e) le:
10.12.2022
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - janvier 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - janvier 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.