Construction and Building Materials - October 2022

Published:	October 2022

Articles in this Issue

Author(s)	Title	Page(s)
Li, Xue / Li, Cuiping / Ruan, Zhuen / Yan, Bingheng / Hou, Hezi / Chen, Long	Analysis of particle migration and agglomeration in paste mixing based on discrete element method	129007
Wu, Yumiao / Zhu, Xingyi / Liu, Chengbin / Dai, Ziwei	Assessment of interfacial fracture of asphalt mortar-aggregate system at low temperature: A study based on four-point bending test of sandwich beams	129057
Gwon, Seongwoo / Ahn, Eunjong / Shin, Myoungsu / Kim, Jin-Yeon / Kim, Gun	Assessment of internal curing of cellulose microfibers-incorporated cement composites using destructive and nondestructive methods	129004
Liu, Qizhou / Lin, Yuhan / Li, Jinzhou / Yang, Chengjian / Chen, Jingyi / Zhang, Min / Liu, Bing	Bond strength prediction model of defective grout materials in half-grouted sleeve connections under uniaxial and cyclic loadings	128981
Fages, J. M. / Tarque, N. / Rodríguez-Mariscal, J. D. / Solís, M.	Calibration of a total strain crack model for adobe masonry based on compression and diagonal compression tests	128965
Sreeram, Anand / Adwani, Dheeraj / Arras, Benjamin / Blomdahl, Daniel / Misztal, Pawel / Bhasin, Amit	Comprehensive evaluation of the oxidative gas based aging method for loose asphalt mixtures	129011
Jiang, Zhen / Cai, Guojun / Tian, Guanglin / Liu, Xuening	Effect of aggregate particle size on mortar pore structure	128988
Sun, Renjuan / Lu, Wei / Ma, Chuanyi / Tawfek, Abdullah M. / Guan, Yanhua / Hu, Xinlei / Zhang, Hongzhi / Ling, Yifeng / Savija, Branko	Effect of crack width and wet-dry cycles on the chloride penetration resistance of engineered cementitious composite (ECC)	129030
Ren, Denghui / Muhammad, Yaseen / Chen, Youchao / Liu, Yu / Mao, Canyun / Xing, Susu / Pei, Ruinan / Zhao, Zhenxia / Li, Jing	Effect of PAN fiber with bionic layered surface structure generated in situ by Fenton reaction on performance of SBS/RP asphalt binder	129001
Soleimani Golsefidi, Sobhan / Ali Sahaf, Seyed	Effect of reclaimed asphalt pavement (RAP) on fracture properties of stone matrix asphalt (SMA) at low temperature	128899
Tamayo, P. / Rico, J. / López-Gayarre, F. / Fiol, F. / Panzera, T. H. / Thomas, C.	Effect of siderurgical aggregates on concrete exposed to saline environments	129061
Cao, Kai / Liu, Ganggui / Li, Hui / Huang, Zhiyi / Ji, Xiaohua	Effects of high temperature and substitution rates of fly ash on the mechanical properties and microstructures of steel-basalt hybrid fibers reinforced cementitious composites	128895
Kasap, Tugrul / Yilmaz, Erol / Sari, Muhammet	Effects of mineral additives and age on microstructure evolution and durability properties of sand-reinforced cementitious mine backfills	129079
Tayyab Adnan, H. / Kienzle, Abigail / Thomas, Robert J.	Engineering properties and setting time of belitic calcium sulfoaluminate (BCSA) cement concrete	128979
Tole, Ilda / Delogu, Francesco / Qoku, Elsa / Habermehl-Cwirzen, Karin / Cwirzen, Andrzej	Enhancement of the pozzolanic activity of natural clays by mechanochemical activation	128739
Marini, Lucas José / Cavalheiro, Raquel Schmitt / Araujo, Victor Almeida de / Cortez-Barbosa, Juliana / Campos, Cristiane Inácio de / Cesar Molina, Julio / Silva, Diogo Aparecido Lopes / Lahr, Francisco Antonio Rocco / Christoforo, André Luís	Estimation of mechanical properties in Eucalyptus woods towards physical and anatomical parameters	128824
Tian, Jun / Wu, Xiaowei / Tan, Xiao / Wang, Wen-Wei / Hu, Shaowei / Du, Yinfei / Yuan, Jinyun / Huang, Wentong / Huang, Xi	Experimental study and analysis model of flexural synergistic effect of reinforced concrete beams strengthened with ECC	128987
Tu, Yan / Yu, Hongfa / Ma, Haiyan / Han, Wenliang / Diao, Yitong	Experimental study of the relationship between bond strength of aggerates interface and microhardness of ITZ in concrete	128990
Kuang, Fenglan / Long, Zhilin / Kuang, Dumin / Guo, Ruiqi / Sun, Jinlei	Experimental study on preparation and properties of low content rubberized geopolymer mortar	128980
Boudjehm, Hocine / Bouteldja, Fathe / Nafa, Zahreddine / Bendjaiche, Robila	Hardened properties of pre-cracked concrete incorporating metakaolin and crushed blast furnace slag as an additional blend material	129009
Chen, Qing / Xie, Linjun / Huang, Anlan / Li, Bin / Sun, Yuxing / Jiang, Zhengwu / Li, Wenting / Zhu, Hehua	Healing of concrete cracks by in-situ synthesis of ettringite induced by electric field	128685
Khan, Kaffayatullah / Iqbal, Mudassir / Jalal, Fazal E. / Amin, Muhammad Nasir / Waqas Alam, Mir / Bardhan, Abidhan	Hybrid ANN models for durability of GFRP rebars in alkaline concrete environment using three swarm-based optimization algorithms	128862
Shi, Tao / Lou, Ping / Zheng, Weiqi / Sheng, Xingwang	A hybrid approach to predict vertical temperature gradient of ballastless track caused by solar radiation	129063
Ying, Jingwei / Tian, Jiashuo / Xiao, Jianzhuang / Tan, Zhiyun	Identification and reconstruction of concrete mesostructure based on deep learning in artificial intelligence	129018
Ge, Xiaonan / Hu, Xiang / Shi, Caijun	Impact of micro characteristics on the formation of high-strength Class F fly ash-based geopolymers cured at ambient conditions	129074
Cheng, Pengjian / Yi, Junyan / Guo, Shaohua / Pei, Zhongshi / Feng, Decheng	Influence of fiber dispersion and distribution on flexural tensile properties of asphalt mixture Based on finite element simulation	128939
Wei, Ziyao / Jia, Yanshun / Wang, Shaoquan / Zhou, Ziyue / Zhang, Zugang / Wang, Xiaoming / Huang, Xiaoming / Gao, Ying	Influence of iron tailing filler on rheological behavior of asphalt mastic	129047
Liu, Jinzhou / Chen, Suhua / Liu, Qi / Wang, Yuchen / Yu, Bin	Influence of steel slag incorporation on internal skeletal contact characteristics within asphalt mixture	129073
Zhang, Lei / Jiang, Xin / Li, Zhenkun / Yang, Zhonghao / Liu, Gang / Dong, Zhichen / Qiu, Yanjun	Influence of the attenuation of subgrade elastic modulus caused by precipitation on ballasted track structure	128971
Jian, Shouwei / Lei, Yuting / Li, BaoDong / Lv, Yang / Gao, Xin / Yang, Xin	Investigation of sulfate on the migration/solidification mechanism and control of cadmium during sintering in lightweight aggregates	129041
Liu, Wenguo / Wang, Jingsong / Wu, Huajie / Xue, Qingguo / Zuo, Haibin	Investigation on the crystallization properties of BaO-bearing blast furnace slag through a confocal laser scanning microscope	129010
Fang, Chenze / Guo, Naisheng / Leng, Zhen / Jiang, Jiwang / Li, Hui / Lu, Guoyang / Wang, Haopeng	Kinetics-based fatigue damage investigation of asphalt mixture through residual strain analysis using indirect tensile fatigue test	128962
Zhu, Zhongfeng / Pathirage, Madura / Wang, Wenwei / Troemner, Matthew / Cusatis, Gianluca	Lattice discrete particle modeling of concrete under cyclic tension–compression with multi-axial confinement	128985
Gholampour, Aliakbar / Danish, Aamar / Ozbakkaloglu, Togay / Yeon, Jung Heum / Gencel, Osman	Mechanical and durability properties of natural fiber-reinforced geopolymers containing lead smelter slag and waste glass sand	129043
Gbekou, Franck Komi / Benzarti, Karim / Boudenne, Abderrahim / Eddhahak, Anissa / Duc, Myriam	Mechanical and thermophysical properties of cement mortars including bio-based microencapsulated phase change materials	129056
Yao, Xiaoguang / Xu, Huiyu / Xu, Tao	Mechanical properties and enhancement mechanisms of cold recycled mixture using waterborne epoxy resin/styrene butadiene rubber latex modified emulsified asphalt	129021
Jiang, Wenlixia / Zhu, Han / Haruna, Sadi Ibrahim / Shao, Jianwen / Yu, Yong / Wu, Kexiao	Mechanical properties and freeze–thaw resistance of polyurethane-based polymer mortar with crumb rubber powder	129040
Xu, Linglin / Sun, Zixuan / Tang, Chaoyu / Yang, Ken / Li, Binbin / Zhang, Yan / Yang, Zhenghong / Wu, Kai	Mitigation effect of accelerators on the lead–zinc tailing induced retardation in autoclaved concrete	128929
Wang, Ning / Han, Tao / Cheng, Hao / Li, Tailin / Fu, Jikai / Ma, Tao / Fu, Yongqiang / Chen, Feng / Zhang, Yang	Monitoring structural health status of asphalt pavement using intelligent sensing technology	129025
Zahra Bouaich, Fatima / Maherzi, Walid / Benzerzour, Mahfoud / Taleb, Mustapha / Abriak, Nor-Edine / Rais, Zakia / Senouci, Ahmed	Mortar mixing using treated wastewater feasibility	128983
Werkovits, Stefan / Bacher, Markus / Theiner, Johannes / Rosenau, Thomas / Grothe, Hinrich	Multi-spectroscopic characterization of bitumen and its polarity-based fractions	128992
Yang, Handuo / Huyan, Ju / Ma, Tao / Tong, Zheng / Han, Chengjia / Xie, Tianyan	Novel Computer Tomography image enhancement deep neural networks for asphalt mixtures	129067
Wu, Di / Xiong, Yan / Yang, Zhenyu	Numerical and experimental study of mechanical behaviors of the steel-confined rubber bearing	128900
Baffoe, Elvis / Ghahremaninezhad, Ali	On the interaction between proteins and cracked cementitious surface	128982
Bakhbergen, Umut / Shon, Chang-Seon / Zhang, Dichuan / Kim, Jong Ryeol / Liu, Jenny	Optimization of mixture parameter for physical and mechanical properties of reactive powder concrete under external sulfate attack using Taguchi method	129023
Kawasaki, Yuma / Fukui, Shinya / Fukuyama, Tomoko	Phenomenological process of rebar corrosion in reinforced concrete evaluated by acoustic emission and electrochemical noise	128829
Yong, Chee Lok / Mo, Kim Hung / Koting, Suhana	Phosphorus slag in supplementary cementitious and alkali activated materials: A review on activation methods	129028
Hafez, Hisham / Teirelbar, Ahmed / Kurda, Rawaz / Tošić, Nikola / de la Fuente, Albert	Pre-bcc: A novel integrated machine learning framework for predicting mechanical and durability properties of blended cement concrete	129019
Yin, Tianyi / Yu, Rui / Liu, Kangning / Wang, Zhiyu / Fan, Dingqiang / Wang, Siyu / Feng, Yuan / Shui, Zhonghe	Precise mix-design of Ultra-High Performance Concrete (UHPC) based on physicochemical packing method: From the perspective of cement hydration	128944
Xia, Kailun / Gu, Yue / Jiang, Linhua / Lyu, Kai / Guo, Mingzhi / Jin, Weizhun	Preparation of a hydrophobic coating on cement-based materials by fluorinated hybrid nanoSiO2 and study on its UV-resistance performance	129003
Cai, Fengjie / Feng, Zhen-Gang / Li, Yingyong / Yao, Dongdong / Lin, Mei / Li, Xinjun	Properties and mechanism of Re-refined engine oil bottom rejuvenated aged asphalt	129068
Pandey, Akanksha / Islam, Sk Sohel / Ransinchung R.N, G. D. / Ravindranath, Sham S.	Quantifying the effect of SBS molecular structure on the upper service temperature rheological properties of modified binders	128826
Amran, Mugahed / Huang, Shan-Shan / Onaizi, Ali M. / Makul, Natt / Abdelgader, Hakim S. / Ozbakkaloglu, Togay	Recent trends in ultra-high performance concrete (UHPC): Current status, challenges, and future prospects	129029
Wu, B. / Yang, X. / Zhang, J. J. / Chen, G. M. / Zhao, X. Y.	Recycled lump concrete-filled FRP tubular columns: Axial compressive behavior and size effects	129000
Jubinville, Dylan / Tzoganakis, Costas / Mekonnen, Tizazu H.	Recycled PLA – Wood flour based biocomposites: Effect of wood flour surface modification, PLA recycling, and maleation	129026
Mezhov, Alexander / Ben Shir, Ira / Schmidt, Asher / Kovler, Konstantin / Diesendruck, Charles E.	Retardation mechanism of cement hydration by a comb polyphosphate superplasticizer	128698
Kirthiga, R. / Elavenil, S.	A review on using inorganic binders in fiber reinforced polymer at different conditions to strengthen reinforced concrete beams	129054
Liu, Linghui / Lei, Mingfeng / Gong, Chenjie / Gan, Shuqing / Yang, Zihan / Kang, Lei / Jia, Chaojun	A robust mix design method for self-compacting concrete	128927
Zhang, Pu / Xu, Fang / Liu, Ye / Sheikh, Shamim Ahmed	Shear behaviour of composite beams with permanent UHPC formwork and high-strength steel rebar	128951
Ren, Jiaolong / Zhang, Xiangquan / Peng, Chang / Wang, Yuanyuan / Wang, Yao / Zhao, Hongbo / Xu, Xinghua / Xia, Liguo / Wang, Chunguang / Li, Gen / Zhao, Zedong / Chen, Jingchun / Wang, Jian	Short-term aging characteristics and mechanisms of SBS-modified bio-asphalt binder considering time-dependent effect	129048
Wang, Yixin / Zhu, Hui / Tu, Wenyao / Su, Yuehong / Jiang, Fatang / Riffat, Saffa	Sound absorption, structure and mechanical behavior of konjac glucomannan-based aerogels with addition of gelatin and wheat straw	129052
Chun, Booki / Oh, Taekgeun / Jang, Yun Sik / Lee, Seung Kyun / Lee, Joo-Ha / Yoo, Doo-Yeol	Strengthening effect of concrete beams using ultra-rapid-hardening fiber-reinforced mortar under flexure	129064
Esmaeili, Reza / Javadi, Sajad / Jamshidi, Hossien / Esmaeili Taheri, Mohsen / Khani Sanij, Hamed	Stripping propensity detection of HMA Mixes: With focus on image processing method	129022
Yin, Shiping / Liu, Zirui / Dong, Pengjie	Study on degradation of mechanical properties of BFRP bars wrapped with seawater sea sand concrete under chloride dry wet cycle	129050
Feng, Weipeng / Jin, Yu / Zheng, Dapeng / Li, Zheng / Cui, Hongzhi	Synergic effect of compositions and processing method on the performance of high strength alkali activated slag foam	128991
Kim, Gyeongryul / Suh, Hyeongwon / Cho, Seongmin / Im, Sumin / Nezhad, Erfan Zal / Seok, Seungwook / Choi, Changsik / Bae, Sungchul	Synergistic strengthening mechanism of Portland cement paste reinforced by a triple hybrid of graphene oxide, functionalized carbon nanotube, and nano-silica	129017
Wu, Yunhong / Li, Junqi / Zhang, Xiaoran / Lin, Cong / Guo, Xiaopeng / Zhang, Xingyu	A systematic field effectiveness evaluation of three maintenance measures for three permeable pavements	128821
Trung Duc Pham, Le / Woo, Ukyong / Choi, Kyoung-Kyu / Choi, Hajin	Tensile characteristics of carbon textile-reinforced mortar incorporating short amorphous metallic and nylon fibers under designed environmental conditions	129059
Chen, Xuepeng / Zhang, Huan / Geng, Yue / Wang, Yu-yin	Tests and prediction model for time-dependent internal relative humidity of recycled aggregate concrete due to self-desiccation	129024
Bakatovich, Aliaksandr / Gaspar, Florindo / Boltrushevich, Nikita	Thermal insulation material based on reed and straw fibres bonded with sodium silicate and rosin	129055
Zafar, Idrees / Rashid, Khuram / Ahmad, Madiha / Ltifi, Mounir	Thermo-chemico-mechanical activation of bagasse ash to develop geopolymer based cold-pressed block	129053
Ali, Hafiz Asad / Lu, Jian Xin / Sun, Keke / Poon, Chi Sun	Valorization of spent fluorescent lamp waste glass powder as an activator for eco-efficient binder materials	129020

About this
data sheet
IssueID
66591
Published on:
23/09/2022
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.