Construction and Building Materials - octobre 2022

Publié:	octobre 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Li, Xue / Li, Cuiping / Ruan, Zhuen / Yan, Bingheng / Hou, Hezi / Chen, Long	Analysis of particle migration and agglomeration in paste mixing based on discrete element method	129007
Wu, Yumiao / Zhu, Xingyi / Liu, Chengbin / Dai, Ziwei	Assessment of interfacial fracture of asphalt mortar-aggregate system at low temperature: A study based on four-point bending test of sandwich beams	129057
Gwon, Seongwoo / Ahn, Eunjong / Shin, Myoungsu / Kim, Jin-Yeon / Kim, Gun	Assessment of internal curing of cellulose microfibers-incorporated cement composites using destructive and nondestructive methods	129004
Liu, Qizhou / Lin, Yuhan / Li, Jinzhou / Yang, Chengjian / Chen, Jingyi / Zhang, Min / Liu, Bing	Bond strength prediction model of defective grout materials in half-grouted sleeve connections under uniaxial and cyclic loadings	128981
Fages, J. M. / Tarque, N. / Rodríguez-Mariscal, J. D. / Solís, M.	Calibration of a total strain crack model for adobe masonry based on compression and diagonal compression tests	128965
Sreeram, Anand / Adwani, Dheeraj / Arras, Benjamin / Blomdahl, Daniel / Misztal, Pawel / Bhasin, Amit	Comprehensive evaluation of the oxidative gas based aging method for loose asphalt mixtures	129011
Jiang, Zhen / Cai, Guojun / Tian, Guanglin / Liu, Xuening	Effect of aggregate particle size on mortar pore structure	128988
Sun, Renjuan / Lu, Wei / Ma, Chuanyi / Tawfek, Abdullah M. / Guan, Yanhua / Hu, Xinlei / Zhang, Hongzhi / Ling, Yifeng / Savija, Branko	Effect of crack width and wet-dry cycles on the chloride penetration resistance of engineered cementitious composite (ECC)	129030
Ren, Denghui / Muhammad, Yaseen / Chen, Youchao / Liu, Yu / Mao, Canyun / Xing, Susu / Pei, Ruinan / Zhao, Zhenxia / Li, Jing	Effect of PAN fiber with bionic layered surface structure generated in situ by Fenton reaction on performance of SBS/RP asphalt binder	129001
Soleimani Golsefidi, Sobhan / Ali Sahaf, Seyed	Effect of reclaimed asphalt pavement (RAP) on fracture properties of stone matrix asphalt (SMA) at low temperature	128899
Tamayo, P. / Rico, J. / López-Gayarre, F. / Fiol, F. / Panzera, T. H. / Thomas, C.	Effect of siderurgical aggregates on concrete exposed to saline environments	129061
Cao, Kai / Liu, Ganggui / Li, Hui / Huang, Zhiyi / Ji, Xiaohua	Effects of high temperature and substitution rates of fly ash on the mechanical properties and microstructures of steel-basalt hybrid fibers reinforced cementitious composites	128895
Kasap, Tugrul / Yilmaz, Erol / Sari, Muhammet	Effects of mineral additives and age on microstructure evolution and durability properties of sand-reinforced cementitious mine backfills	129079
Tayyab Adnan, H. / Kienzle, Abigail / Thomas, Robert J.	Engineering properties and setting time of belitic calcium sulfoaluminate (BCSA) cement concrete	128979
Tole, Ilda / Delogu, Francesco / Qoku, Elsa / Habermehl-Cwirzen, Karin / Cwirzen, Andrzej	Enhancement of the pozzolanic activity of natural clays by mechanochemical activation	128739
Marini, Lucas José / Cavalheiro, Raquel Schmitt / Araujo, Victor Almeida de / Cortez-Barbosa, Juliana / Campos, Cristiane Inácio de / Cesar Molina, Julio / Silva, Diogo Aparecido Lopes / Lahr, Francisco Antonio Rocco / Christoforo, André Luís	Estimation of mechanical properties in Eucalyptus woods towards physical and anatomical parameters	128824
Tian, Jun / Wu, Xiaowei / Tan, Xiao / Wang, Wen-Wei / Hu, Shaowei / Du, Yinfei / Yuan, Jinyun / Huang, Wentong / Huang, Xi	Experimental study and analysis model of flexural synergistic effect of reinforced concrete beams strengthened with ECC	128987
Tu, Yan / Yu, Hongfa / Ma, Haiyan / Han, Wenliang / Diao, Yitong	Experimental study of the relationship between bond strength of aggerates interface and microhardness of ITZ in concrete	128990
Kuang, Fenglan / Long, Zhilin / Kuang, Dumin / Guo, Ruiqi / Sun, Jinlei	Experimental study on preparation and properties of low content rubberized geopolymer mortar	128980
Boudjehm, Hocine / Bouteldja, Fathe / Nafa, Zahreddine / Bendjaiche, Robila	Hardened properties of pre-cracked concrete incorporating metakaolin and crushed blast furnace slag as an additional blend material	129009
Chen, Qing / Xie, Linjun / Huang, Anlan / Li, Bin / Sun, Yuxing / Jiang, Zhengwu / Li, Wenting / Zhu, Hehua	Healing of concrete cracks by in-situ synthesis of ettringite induced by electric field	128685
Khan, Kaffayatullah / Iqbal, Mudassir / Jalal, Fazal E. / Amin, Muhammad Nasir / Waqas Alam, Mir / Bardhan, Abidhan	Hybrid ANN models for durability of GFRP rebars in alkaline concrete environment using three swarm-based optimization algorithms	128862
Shi, Tao / Lou, Ping / Zheng, Weiqi / Sheng, Xingwang	A hybrid approach to predict vertical temperature gradient of ballastless track caused by solar radiation	129063
Ying, Jingwei / Tian, Jiashuo / Xiao, Jianzhuang / Tan, Zhiyun	Identification and reconstruction of concrete mesostructure based on deep learning in artificial intelligence	129018
Ge, Xiaonan / Hu, Xiang / Shi, Caijun	Impact of micro characteristics on the formation of high-strength Class F fly ash-based geopolymers cured at ambient conditions	129074
Cheng, Pengjian / Yi, Junyan / Guo, Shaohua / Pei, Zhongshi / Feng, Decheng	Influence of fiber dispersion and distribution on flexural tensile properties of asphalt mixture Based on finite element simulation	128939
Wei, Ziyao / Jia, Yanshun / Wang, Shaoquan / Zhou, Ziyue / Zhang, Zugang / Wang, Xiaoming / Huang, Xiaoming / Gao, Ying	Influence of iron tailing filler on rheological behavior of asphalt mastic	129047
Liu, Jinzhou / Chen, Suhua / Liu, Qi / Wang, Yuchen / Yu, Bin	Influence of steel slag incorporation on internal skeletal contact characteristics within asphalt mixture	129073
Zhang, Lei / Jiang, Xin / Li, Zhenkun / Yang, Zhonghao / Liu, Gang / Dong, Zhichen / Qiu, Yanjun	Influence of the attenuation of subgrade elastic modulus caused by precipitation on ballasted track structure	128971
Jian, Shouwei / Lei, Yuting / Li, BaoDong / Lv, Yang / Gao, Xin / Yang, Xin	Investigation of sulfate on the migration/solidification mechanism and control of cadmium during sintering in lightweight aggregates	129041
Liu, Wenguo / Wang, Jingsong / Wu, Huajie / Xue, Qingguo / Zuo, Haibin	Investigation on the crystallization properties of BaO-bearing blast furnace slag through a confocal laser scanning microscope	129010
Fang, Chenze / Guo, Naisheng / Leng, Zhen / Jiang, Jiwang / Li, Hui / Lu, Guoyang / Wang, Haopeng	Kinetics-based fatigue damage investigation of asphalt mixture through residual strain analysis using indirect tensile fatigue test	128962
Zhu, Zhongfeng / Pathirage, Madura / Wang, Wenwei / Troemner, Matthew / Cusatis, Gianluca	Lattice discrete particle modeling of concrete under cyclic tension–compression with multi-axial confinement	128985
Gholampour, Aliakbar / Danish, Aamar / Ozbakkaloglu, Togay / Yeon, Jung Heum / Gencel, Osman	Mechanical and durability properties of natural fiber-reinforced geopolymers containing lead smelter slag and waste glass sand	129043
Gbekou, Franck Komi / Benzarti, Karim / Boudenne, Abderrahim / Eddhahak, Anissa / Duc, Myriam	Mechanical and thermophysical properties of cement mortars including bio-based microencapsulated phase change materials	129056
Yao, Xiaoguang / Xu, Huiyu / Xu, Tao	Mechanical properties and enhancement mechanisms of cold recycled mixture using waterborne epoxy resin/styrene butadiene rubber latex modified emulsified asphalt	129021
Jiang, Wenlixia / Zhu, Han / Haruna, Sadi Ibrahim / Shao, Jianwen / Yu, Yong / Wu, Kexiao	Mechanical properties and freeze–thaw resistance of polyurethane-based polymer mortar with crumb rubber powder	129040
Xu, Linglin / Sun, Zixuan / Tang, Chaoyu / Yang, Ken / Li, Binbin / Zhang, Yan / Yang, Zhenghong / Wu, Kai	Mitigation effect of accelerators on the lead–zinc tailing induced retardation in autoclaved concrete	128929
Wang, Ning / Han, Tao / Cheng, Hao / Li, Tailin / Fu, Jikai / Ma, Tao / Fu, Yongqiang / Chen, Feng / Zhang, Yang	Monitoring structural health status of asphalt pavement using intelligent sensing technology	129025
Zahra Bouaich, Fatima / Maherzi, Walid / Benzerzour, Mahfoud / Taleb, Mustapha / Abriak, Nor-Edine / Rais, Zakia / Senouci, Ahmed	Mortar mixing using treated wastewater feasibility	128983
Werkovits, Stefan / Bacher, Markus / Theiner, Johannes / Rosenau, Thomas / Grothe, Hinrich	Multi-spectroscopic characterization of bitumen and its polarity-based fractions	128992
Yang, Handuo / Huyan, Ju / Ma, Tao / Tong, Zheng / Han, Chengjia / Xie, Tianyan	Novel Computer Tomography image enhancement deep neural networks for asphalt mixtures	129067
Wu, Di / Xiong, Yan / Yang, Zhenyu	Numerical and experimental study of mechanical behaviors of the steel-confined rubber bearing	128900
Baffoe, Elvis / Ghahremaninezhad, Ali	On the interaction between proteins and cracked cementitious surface	128982
Bakhbergen, Umut / Shon, Chang-Seon / Zhang, Dichuan / Kim, Jong Ryeol / Liu, Jenny	Optimization of mixture parameter for physical and mechanical properties of reactive powder concrete under external sulfate attack using Taguchi method	129023
Kawasaki, Yuma / Fukui, Shinya / Fukuyama, Tomoko	Phenomenological process of rebar corrosion in reinforced concrete evaluated by acoustic emission and electrochemical noise	128829
Yong, Chee Lok / Mo, Kim Hung / Koting, Suhana	Phosphorus slag in supplementary cementitious and alkali activated materials: A review on activation methods	129028
Hafez, Hisham / Teirelbar, Ahmed / Kurda, Rawaz / Tošić, Nikola / de la Fuente, Albert	Pre-bcc: A novel integrated machine learning framework for predicting mechanical and durability properties of blended cement concrete	129019
Yin, Tianyi / Yu, Rui / Liu, Kangning / Wang, Zhiyu / Fan, Dingqiang / Wang, Siyu / Feng, Yuan / Shui, Zhonghe	Precise mix-design of Ultra-High Performance Concrete (UHPC) based on physicochemical packing method: From the perspective of cement hydration	128944
Xia, Kailun / Gu, Yue / Jiang, Linhua / Lyu, Kai / Guo, Mingzhi / Jin, Weizhun	Preparation of a hydrophobic coating on cement-based materials by fluorinated hybrid nanoSiO2 and study on its UV-resistance performance	129003
Cai, Fengjie / Feng, Zhen-Gang / Li, Yingyong / Yao, Dongdong / Lin, Mei / Li, Xinjun	Properties and mechanism of Re-refined engine oil bottom rejuvenated aged asphalt	129068
Pandey, Akanksha / Islam, Sk Sohel / Ransinchung R.N, G. D. / Ravindranath, Sham S.	Quantifying the effect of SBS molecular structure on the upper service temperature rheological properties of modified binders	128826
Amran, Mugahed / Huang, Shan-Shan / Onaizi, Ali M. / Makul, Natt / Abdelgader, Hakim S. / Ozbakkaloglu, Togay	Recent trends in ultra-high performance concrete (UHPC): Current status, challenges, and future prospects	129029
Wu, B. / Yang, X. / Zhang, J. J. / Chen, G. M. / Zhao, X. Y.	Recycled lump concrete-filled FRP tubular columns: Axial compressive behavior and size effects	129000
Jubinville, Dylan / Tzoganakis, Costas / Mekonnen, Tizazu H.	Recycled PLA – Wood flour based biocomposites: Effect of wood flour surface modification, PLA recycling, and maleation	129026
Mezhov, Alexander / Ben Shir, Ira / Schmidt, Asher / Kovler, Konstantin / Diesendruck, Charles E.	Retardation mechanism of cement hydration by a comb polyphosphate superplasticizer	128698
Kirthiga, R. / Elavenil, S.	A review on using inorganic binders in fiber reinforced polymer at different conditions to strengthen reinforced concrete beams	129054
Liu, Linghui / Lei, Mingfeng / Gong, Chenjie / Gan, Shuqing / Yang, Zihan / Kang, Lei / Jia, Chaojun	A robust mix design method for self-compacting concrete	128927
Zhang, Pu / Xu, Fang / Liu, Ye / Sheikh, Shamim Ahmed	Shear behaviour of composite beams with permanent UHPC formwork and high-strength steel rebar	128951
Ren, Jiaolong / Zhang, Xiangquan / Peng, Chang / Wang, Yuanyuan / Wang, Yao / Zhao, Hongbo / Xu, Xinghua / Xia, Liguo / Wang, Chunguang / Li, Gen / Zhao, Zedong / Chen, Jingchun / Wang, Jian	Short-term aging characteristics and mechanisms of SBS-modified bio-asphalt binder considering time-dependent effect	129048
Wang, Yixin / Zhu, Hui / Tu, Wenyao / Su, Yuehong / Jiang, Fatang / Riffat, Saffa	Sound absorption, structure and mechanical behavior of konjac glucomannan-based aerogels with addition of gelatin and wheat straw	129052
Chun, Booki / Oh, Taekgeun / Jang, Yun Sik / Lee, Seung Kyun / Lee, Joo-Ha / Yoo, Doo-Yeol	Strengthening effect of concrete beams using ultra-rapid-hardening fiber-reinforced mortar under flexure	129064
Esmaeili, Reza / Javadi, Sajad / Jamshidi, Hossien / Esmaeili Taheri, Mohsen / Khani Sanij, Hamed	Stripping propensity detection of HMA Mixes: With focus on image processing method	129022
Yin, Shiping / Liu, Zirui / Dong, Pengjie	Study on degradation of mechanical properties of BFRP bars wrapped with seawater sea sand concrete under chloride dry wet cycle	129050
Feng, Weipeng / Jin, Yu / Zheng, Dapeng / Li, Zheng / Cui, Hongzhi	Synergic effect of compositions and processing method on the performance of high strength alkali activated slag foam	128991
Kim, Gyeongryul / Suh, Hyeongwon / Cho, Seongmin / Im, Sumin / Nezhad, Erfan Zal / Seok, Seungwook / Choi, Changsik / Bae, Sungchul	Synergistic strengthening mechanism of Portland cement paste reinforced by a triple hybrid of graphene oxide, functionalized carbon nanotube, and nano-silica	129017
Wu, Yunhong / Li, Junqi / Zhang, Xiaoran / Lin, Cong / Guo, Xiaopeng / Zhang, Xingyu	A systematic field effectiveness evaluation of three maintenance measures for three permeable pavements	128821
Trung Duc Pham, Le / Woo, Ukyong / Choi, Kyoung-Kyu / Choi, Hajin	Tensile characteristics of carbon textile-reinforced mortar incorporating short amorphous metallic and nylon fibers under designed environmental conditions	129059
Chen, Xuepeng / Zhang, Huan / Geng, Yue / Wang, Yu-yin	Tests and prediction model for time-dependent internal relative humidity of recycled aggregate concrete due to self-desiccation	129024
Bakatovich, Aliaksandr / Gaspar, Florindo / Boltrushevich, Nikita	Thermal insulation material based on reed and straw fibres bonded with sodium silicate and rosin	129055
Zafar, Idrees / Rashid, Khuram / Ahmad, Madiha / Ltifi, Mounir	Thermo-chemico-mechanical activation of bagasse ash to develop geopolymer based cold-pressed block	129053
Ali, Hafiz Asad / Lu, Jian Xin / Sun, Keke / Poon, Chi Sun	Valorization of spent fluorescent lamp waste glass powder as an activator for eco-efficient binder materials	129020

Informations
sur cette fiche
IssueID
66591
Publié(e) le:
23.09.2022
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - octobre 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - octobre 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.