Construction and Building Materials - August 2022

Published:	August 2022

Articles in this Issue

Author(s)	Title	Page(s)
Esselami, Redha / Wilson, William / Tagnit-Hamou, Arezki	An accelerated physical sulfate attack test using an induction period and heat drying: First applications to concrete with different binders including ground glass pozzolan and limestone filler	128046
Chen, Aijiu / Han, Xiaoyan / Wang, Zhihao / Zhang, Qing / Xia, Xiaozhou / Ji, Yanting / Li, Keliang	Analytical evaluation of compressive strength for concrete with rubber fine aggregates and the predictive model	128359
Santana-Carrillo, Jose Luis / Burciaga-Díaz, Oswaldo / Ivan Escalante-Garcia, J.	Blended Portland cement with high limestone loads modified with a waste glass based sodium silicate of different ratios SiO2/Na2O	128411
Meng, Fanjun / Chen, Wanxiang / Ma, Jianjun / Xue, Haien / Xie, Tianxing / Xu, Zhengyang	Bond behaviors of BFRP bars in concrete using carbon fiber rib anchorage	128305
Yusuf, M. / Sarhat, S. / Hajiloo, H. / Green, M. F.	Bond strength between steel reinforcement and RCA concrete during and after exposure to elevated temperatures	128362
Wang, Bin / Zhu, Eryu / Zhang, Zhu / Zhu, Chunqi	Bond-slip behaviour of lightweight aggregate concrete based on virtual crack model with exponential softening characteristics	128349
Chen, Hui / Jiang, Jiwang / Bahia, Hussain U.	Characterization of mortar film distribution of asphalt mixtures containing reclaimed asphalt pavement and its relationship with fracture performance using image analysis method	128338
Yin, Kangting / Jiang, Yaqing / He, Hui / Ren, Jie / Li, Zhenming	Characterization of one-part alkali-activated slag with rice straw ash	128403
Zhang, Kun / Mezhov, Alexander / Schmidt, Wolfram	Chemical and thixotropic contribution to the structural build-up of cementitious materials	128307
Wang, Ning / Ma, Tao / Chen, Feng / Ma, Yuan	Compaction quality assessment of cement stabilized gravel using intelligent compaction technology—A case study	128100
Chen, Xiaoguang / Capiau, Laurent / Reynaert, Ibbe / Zheng, Kai / Gruyaert, Elke / Li, Jiabin	Comparative study on modelling concrete properties using physical and mechanical properties of recycled coarse aggregate	128249
Liao, Qiao / Su, Yuanrui / Yu, Jiangtao / Yu, Kequan	Compression-shear performance and failure criteria of seawater sea-sand engineered cementitious composites with polyethylene fibers	128386
Ogbo, Chibuike / Dave, Eshan V. / Sias, Jo E. / Zegeye, Eyoab	Correlating field and laboratory evolution of curing in cold in-place recycled (CIR) materials	128352
Li, Li / Tao, Jia-Cheng / Zhang, Yang / Sun, Hai-xin / Yuen, Ka-Veng / You, Pei-Bo	Crack fractal analysis of fractured polyethylene fiber reinforced alkali activated mortar under flexural load	128428
Shan, Jingsong / Zhang, Yuan / Wu, Shuyin / Wu, Qiulin / Jiao, Yuying / Du, Yang	Cracking behavior of asphalt pavement with a graded gravel layer based on computational granular mechanics	128199
Zhou, Junlong / Li, Dongsheng	Cyclic compressive behavior of seawater sea-sand concrete after seawater freeze–thaw cycles: Experimental investigation and analytical model	128227
Li, Yanlong / Guo, Hanyu / Zhou, Heng / Li, Yang / Chen, Junhao	Damage characteristics and constitutive model of concrete under uniaxial compression after Freeze-Thaw damage	128171
Li, Guannan / Tan, Yiqiu / Fu, Yongkang / Liu, Pengfei / Fu, Chaoliang / Oeser, Markus	Density, zero shear viscosity and microstructure analysis of asphalt binder using molecular dynamics simulation	128332
Deng, Yue / Hu, Mingjun / Xu, Lei / Ling, Senlin / Ni, Hangtian / Sun, Daquan	Dual roles played by manganese dioxide filler in asphalt pavement material: Chemical modification and healing improvement	128371
Looney, Trevor / Leggs, Maranda / Volz, Jeffery / Floyd, Royce	Durability and corrosion resistance of ultra-high performance concretes for repair	128238
Wang, Z. H. / Wen, H. M. / Zheng, H. / Cheng, J. S.	Dynamic increase factors of concrete-like materials at very high strain rates	128270
Yuan, Jie / Huang, Xin / Chen, Xin / Ge, Qian / Zhang, Zhichao	Early-age mechanical properties and hydration degrees of magnesium phosphate cement paste in freezing winter of cold regions	128337
López-García, Ana B. / Uceda-Rodríguez, Manuel / León-Gutiérrez, Sara / Cobo-Ceacero, Carlos Javier / Moreno-Maroto, José Manuel	Eco-efficient transformation of mineral wool wastes into lightweight aggregates at low firing temperature and associated environmental assessment	128294
Xu, Guizhong / Han, Qiyuan / Wang, Zhenghong / Wu, Jianxin / Yin, Jie	Eco-friendly rice straw as vertical drains for dredged slurry treatment as construction fill	128244
Nemati Giv, Ali / Fu, Qiuni / Yan, Libo / Kasal, Bohumil	The effect of adhesive amount and type on failure mode and shear strength of glued timber-concrete joints	128375
Wang, Zhen / Li, Jinzhen / Huang, Shaowen / Wu, Feilong / Zhu, Jie	Effect of Al2O3/SiO2 ratio on the chroma and phase compositions of white sulfoaluminate cement clinker	128202
Zajac, Maciej / Wieczorek, Marc / Lothenbach, Barbara / Bullerjahn, Frank / Schmidt, Volkmar M. / Ben Haha, Mohsen	Effect of alkali and sulfate on early hydration of Portland cements at high water to cement ratio	128283
Castoldi, Raylane de Souza / de Souza, Lourdes Maria Silva / Souto, Felipe / Liebscher, Marco / Mechtcherine, Viktor / de Andrade Silva, Flávio	Effect of alkali treatment on physical–chemical properties of sisal fibers and adhesion towards cement-based matrices	128363
Baffoe, Elvis / Ghahremaninezhad, Ali	The effect of biomolecules on enzyme-induced calcium carbonate precipitation in cementitious materials	128323
Yang, Fengming / Xie, Jiateng / Wang, Weijie / Wang, Wenlong / Wang, Zengmei	Effect of graphene oxide or triethanolamine-modified graphene oxide on the hydration of calcium sulfoaluminate cement	128315
Yang, Jun / Ding, Qingjun / Zhang, Gaozhan / Hou, Dongshuai / Zhao, Mingyu / Cao, Jierong	Effect of sulfate attack on the composition and micro-mechanical properties of C-A-S-H gel in cement-slag paste: A combined study of nanoindentation and SEM-EDS	128275
Sena da Fonseca, B. / Ferreira Pinto, A. P. / Rodrigues, A. / Piçarra, S. / Santos, C. / Montemor, M. F.	Effect of the pore network and mineralogy of stones on the behavior of alkoxysilane-based consolidants	128383
Zhang, Xiong / Wang, Baomin / Chang, Jun / Fan, Chengcheng / Liu, Ze	Effect of zeolite contents on mineral evolution and heavy metal solidification in alkali-activated MSWI fly ash specimens	128309
Rusheng, Qian / Yunsheng, Zhang / Yu, Zhang / Cheng, Liu / Lin, Yang / Deyu, Kong	Effects of aqueous-phase speciation on Portland cement and supplementary cementitious materials as reflected using zeta potential of powder suspensions	128258
Chen, Huabao / Liu, Yuhua / Cui, Hao / Zhang, Wenyi / Hu, Linchao / Mao, Linqiang	Effects of electric arc furnace slag on promoting quality and environmental safety of fired bricks incorporating municipal solid waste incineration fly ash	128327
Lin, Hongwei / Han, Yanfeng / Liang, Siming / Gong, Fuyuan / Han, Song / Shi, Changwei / Feng, Peng	Effects of low temperatures and cryogenic freeze-thaw cycles on concrete mechanical properties: A literature review	128287
Lin, Chenlong / Wang, Siyu / Ma, Wentao / Yan, Yuhong / Lu, Yiyan	Effects of sodium aluminate on the performance of seawater sea-sand engineered cementitious composites	128422
Mirdad, Md Abdul Hamid / Jucutan, Arman / Khan, Rafid / Niederwestberg, Jan / Chui, Ying Hei	Embedment and withdrawal stiffness predictions of self-tapping screws in timber	128394
Choi, Eunsoo / Ostadrahimi, Alireza / Kim, Woo Jin	Enhancement of compressive strength and strain ductility of SMA fiber reinforced concrete considering fiber’s aspect ratios	128346
Han, Ding / Zhu, Chaochao / Du, Qingcan / Hu, Huimin	Establishment and verification of different fixed parameter combinations of the 2S2P1D model for asphalt mixture	128379
Zhang, Zhao / Liu, Kai / Chong, Dan / Niu, Dongyu / Lin, Peng / Liu, Xueyan / Niu, Yanhui / Jing, Ruxin	Evaluation of photocatalytic micro-surfacing mixture: road performance, vehicle exhaust gas degradation capacity and environmental impacts	128367
Farhan, Khatib Zada / Megat Johari, Megat Azmi / Demirboğa, Ramazan	Evaluation of properties of steel fiber reinforced GGBFS-based geopolymer composites in aggressive environments	128339
Pereira, Mara Monaliza Linhares / Silva Capuzzo, Valdirene Maria / Lameiras, Rodrigo de Melo	Evaluation of use of marble and granite cutting waste to the production of self-compacting concrete	128261
Ding, Zhenzhao / Quy, Nguyen Xuan / Kim, JiHoon / Hama, Yukio	Evaluations of frost and scaling resistance of fly ash concrete in terms of changes in water absorption and pore structure under the accelerated carbonation conditions	128273
Yang, Ting / Xu, Shenchun / Liu, Zhongxian / Li, Jun / Wu, Pengtao / Yang, Yekai / Wu, Chengqing	Experimental and numerical investigation of bond behavior between geopolymer based ultra-high-performance concrete and steel bars	128220
Seifeddine, Khaled / Amziane, Sofiane / Toussaint, Evelyne	Experimental investigation of physical characteristics to improve the cooling effect of permeable pavements	128342
Liu, Chuankun / Wei, Ya	Experimental study on interface performance between implantable cement-based sensor and matrix concrete	128316
Wanare, Ram / Jayanthi, Prathyusha / Iyer, Kannan K. R.	Experimental study on sustainable stabilization of marine soil with ultrafine slag and activator for controlling its cracking characteristics	128310
Park, Jae-Chan / Jung, Hyung-Jo	An experimental study on the steel corrosion behavior in NaCl-immersed concrete under hydraulic pressure	128347
He, Lei / Chu, Longjia / Wang, HuiChen / Fwa, T. F.	Experimental-cum-Numerical approach for thermal conductivity determination of asphalt paving mixture and its constituents	128357
Srivastava, Sumit / Jacklin, Rob / Snellings, Ruben / Barker, Richard / Spooren, Jeroen / Cool, Pegie	Experiments and modelling to understand FeCO3 cement formation mechanism: time-evolution of CO2-species, dissolved-Fe, and pH during CO2-induced dissolution of Fe(0)	128281
Zhang, Xiaofeng / Luo, Lisheng / Xie, Xinran / Zhang, Yongqiang / Li, Zheng	Flexural bearing capacity and stiffness of stiffened hollow glulam beams: Experiments, finite element analysis and calculation theory	128407
Ilangovan, Manikandan / Navada, Akash P. / Guna, Vijaykumar / Touchaleaume, François / Saulnier, Benjamin / Grohens, Yves / Reddy, Narendra	Hybrid biocomposites with high thermal and noise insulation from discarded wool, poultry feathers, and their blends	128324
Wang, Ziyan / Shui, Zhonghe / Li, Zhiwei / Sun, Tao / Ye, Zhiyi	Hydration characterization of Mg2+ blended excess-sulphate phosphogypsum slag cement system during early age	128191
Mazzuca, Pietro / Firmo, João P. / Correia, João R. / Castilho, Eloísa	Influence of elevated temperatures on the mechanical properties of glass fibre reinforced polymer laminates produced by vacuum infusion	128340
Qin, Wang / Haiyu, Zheng / Yue, Wang / Sihan, Shan / Kejun, Liu	Influence of phosphorus impurities on the structure and performance of cellulose-ether-modified gypsum	128230
Yang, Shuyan / Han, Min / Chen, Xiaolong / Song, Junjie / Yang, Jiansen	Influence of sulfate crystallization on bond-slip behavior between deformed rebar and concrete subjected to combined actions of dry-wet cycle and freeze-thaw cycle	128368
Zhang, Zhao / Cui, Yu-Jun / Yang, Jin-Wen / Mokni, Nadia	Investigation into the hydro-mechanical behaviour and microstructural evolution of MX80 bentonite pellet upon wetting/drying	128319
Yu, Zhihui / Wu, Lishan / Zhang, Cong / Chen, Qingzuo / Bangi, Toshiyuki	Investigation of SAP content on the shrinkage and tensile properties of ultra-high performance concrete	128402
Li, Chen / Ma, Feng / Fu, Zhen / Dai, Jiasheng / Wen, Yalu / Shi, Ke	Investigation of the solution effects on asphalt binder and mastic through molecular dynamics simulations	128314
Zhang, Weizhuo / Zheng, Chenhao / Li, Zhenlin / Jin, Hesong / Liu, Jun / Zhu, Jihua / Liu, Wei / Xing, Feng	Investigation on mechanical properties improvement of seawater engineered cementitious composites (ECC) using FA/LC2	128271
Consoli, Nilo Cesar / Silvano, Lukas Wereszko / Lotero, Andres / Scheuermann Filho, Hugo Carlos / Moncaleano, Cindy Johanna / Cristelo, Nuno	Key parameters establishing alkali activation effects on stabilized rammed earth	128299
Ali, Ayman / Kabir, Sk Faisal / Al-Badr, Basel / Alfalah, Ahmad / Xie, Zhaoxing / DeCarlo, Christopher / Elshaer, Mohamed / Mehta, Yusuf	Laboratory performance of dense graded asphalt mixtures prepared using highly polymer modified binders containing corn oil as softening agent	128336
ul Haq, Inzimam / Elahi, Ayub / Nawaz, Adnan / Aamir Qadeer Shah, Syed / Ali, Khawar	Mechanical and durability performance of concrete mixtures incorporating bentonite, silica fume, and polypropylene fibers	128223
Wang, Suxi / Li, Haitao / Cheng, Gensheng / Xiong, Zhenhua / Ashraf, Mahmud	Mechanical behavior of bolted steel laminated bamboo lumber connections loaded perpendicular to grain	128302
Li, Gengying / Wang, Linbing / Yu, Jing / Yi, Biliang / He, Chunbao / Wang, Zhongkun / Leung, Christopher K. Y.	Mechanical properties and material characterization of cement mortar incorporating CNT-engineered polyvinyl alcohol latex	128320
Zhang, Longjian / Mo, Kim Hung / Yap, Soon Poh / Gencel, Osman / Ling, Tung-Chai	Mechanical strength, water resistance and drying shrinkage of lightweight hemihydrate phosphogypsum-cement composite with ground granulated blast furnace slag and recycled waste glass	128232
Zolotarev, Victor	Methods for determining stresses at key temperatures	128365
Zhang, Zaiyu / Wu, Xiaohong / Hu, Gaoxing / Sun, Qing	Numerical study on triaxial compressive behavior of engineered cementitious composites confined by circular steel tubes	128285
Feng, Zhuojun / Zhou, Yingwu / Sui, Lili / Zhu, Zhongfeng	Optimal design of a low-cost high-performance hybrid fiber engineered cementitious composites	128372
Dong, Zejiao / Guo, Zishuo / Zhang, Huiquan / Li, Jianguo	Optimal design of prefabricated base joint for asphalt pavement based on finite element method and field deflection test	128301
Wu, Jiacheng / Zhang, Yong / Li, Kunyuan / Su, Liang	Origami-inspired metamaterials hierarchical structure with tailorable crushing behavior	128328
Kang, Shinhyu / Boyd, Braden / Ley, M. Tyler	Performance and prediction of non-traditional coal-ash in concrete with the Particle Model	128170
Lu, Juetian / Zhang, Henghua / Yang, Hui / Wang, Jiabang	Performance of resin–cement composite clad modified vitrified beads	128317
Khan, Shahbaz / Ashish, Prabin Kumar / Kannelli, Venkatasrinivas / Hossain, Kamal / Nagabhushana, M. N. / Tiwari, Devesh	Potential application of over-burnt brick and fly ash for sustainable inverted pavement structure	128298
Netinger Grubeša, Ivanka / Marković, Berislav / Nyarko, Marijana Hadzima / Krstić, Hrvoje / Brdarić, Jelena / Filipović, Nikolina / Szenti, Imre / Kukovecz, Ákos	Potential of fruit pits as aggregate in concrete	128366
Farouk, Abdulwarith Ibrahim Bibi / Zhu, Jinsong / Ding, Jingnan / Haruna, S. I.	Prediction and uncertainty quantification of ultimate bond strength between UHPC and reinforcing steel bar using a hybrid machine learning approach	128360
Abdulalim Alabdullah, Anas / Iqbal, Mudassir / Zahid, Muhammad / Khan, Kaffayatullah / Amin, Muhammad Nasir / Jalal, Fazal E.	Prediction of rapid chloride penetration resistance of metakaolin based high strength concrete using light GBM and XGBoost models by incorporating SHAP analysis	128296
Abdel-Gawwad, Hamdy A. / Tawfik, Taher A. / Sikora, Pawel / Abd Elrahman, Mohamed	Preparation and characterization of a novel alkali-activated magnesite cement	128384
Debnath, N. K. / Pabbisetty, V. K. / Sarkar, K. / Singh, A. / Majhi, M. R. / Singh, V. K.	Preparation and characterization of semi-silica insulation refractory by utilizing lignite fly ash waste materials	128321
Jian, Shouwei / Cheng, Cheng / Lv, Yang / Wang, Caifeng / Tan, Hongbo / Li, BaoDong	Preparation and evaluation of high-fluid backfill materials from construction spoil	128370
Das, Shaswat Kumar / Adediran, Adeolu / Kaze, Cyriaque Rodrigue / Mustakim, Syed Mohammed / Leklou, Nordine	Production, characteristics, and utilization of rice husk ash in alkali activated materials: An overview of fresh and hardened state properties	128341
Li, Jincheng / Sun, Zhigao / Wang, Lei / Yang, Xingchun / Zhang, Dongliang / Zhang, Xiaowei / Wang, Mitang	Properties and mechanism of high-magnesium nickel slag-fly ash based geopolymer activated by phosphoric acid	128256
Islam, Md. Mashfiqul / Zhang, Qian / Jin, Qingxu	A review of existing codes and standards on design factors for UHPC placement and fiber orientation	128308
Jin, Xiaodong / Wu, Xinyi / Cui, Suping / Wang, Wanfu / Zhang, Yao / Sun, Shibing / Sun, Dawei	A robust adhesion between extruded polystyrene foam and mortar through different chemical linkages under ultraviolet-ozone irradiation	128414
Babagoli, Rezvan / Nasr, Danial / Ameli, Alireza / Moradi, Mohammad Reza	Rutting and fatigue properties of modified binders with polymer and titanium dioxide nanoparticles	128423
Raza, Ali / Ouni, Mohamed Hechmi El / Azab, Marc / Ali, Khawar / Haider, Hammad / Rashedi, Ahmad	A scientometric review on mechanical and durability performance of geopolymer Paste: Effect of various raw materials	128297
Wang, Wei-Chih / Nguyen, Ngoc-Mai / Cao, Minh-Tu	Smart ensemble machine learner with hyperparameter-free for predicting bond capacity of FRP-to-concrete interface: Multi-national data	128158
Liu, Yiliang / Mo, Zongyun / Su, Youpo / Chen, Yanhua	State-of-the-art controlled low-strength materials using incineration industrial by-products as cementitious materials	128391
Hamla, Wafa / Benamara, Dalila / Noui, Ammar	Statistical modeling of physical and mechanical responses of roller-compacted sand concrete made with ternary sand using the experimental design method	128354
Al-Subari, Lutf / Ekinci, Abdullah	Strength and durability assessment of shredded tire rubber stabilized artificially cemented alluvial clay	128312
Alsaif, Abdulaziz / Alharbi, Yousef R.	Strength, durability and shrinkage behaviours of steel fiber reinforced rubberized concrete	128295
Zhang, Jianjun / Yao, Baicong / Sun, Yuanjun / Wang, Meng / Sun, Qi / Sun, Chuang / Wang, Baoqiang / Lin, Zenghua	Study of the effects of an ionic stabilizer on the permeability of gangue bonding material	128325
Song, Wenhao / Wang, Qing / Qu, Lei / Li, Xiaodong / Xu, Shuangshuang	Study of water absorption and corrosion resistance of the mortar with waste marble powder	128235
Han, Zhao / Zhang, Yunsheng / Qiao, Hongxia / Feng, Qiong / Xue, Cuizhen / Shang, Minggang	Study on axial compressive behavior and damage constitutive model of manufactured sand concrete based on fluidity optimization	128176
Yuan, Ji / Li, Dongbin / Li, Weilong / Yang, Hailu / Zhang, Wenhua / Wang, Linbing / Wang, Jianjun / Xiong, Zhenzhen	Study on frost resistance of EPS concrete based on EPS beads wrapping modification	128400
Chen, Fang / Zhang, Liaojun / Zou, Chenyang / Zhu, Xiaoliang / Fang, Qinghe / Xu, Saihui	Study on influencing factors of shear characteristics of rock-fill concrete layer of iron tailings as fine aggregate	128213
Wang, Chonghui / Zhou, Xiaodong / Liu, Pengfei / Lu, Guoyang / Wang, Hainian / Oeser, Markus	Study on pre-compaction of pavement graded gravels via imaging technologies, artificial intelligent and numerical simulations	128380
Wang, Duanyi / Chen, Guangwei / Chen, Zhaojie / Tang, Cheng	Study on preparation method of strength and morphology controlled aggregates used in asphalt mixture	128189
Qiu, Jisheng / Cheng, Kun / Zhang, Ruyi / Gao, Yang / Guan, Xiao	Study on the influence mechanism of activated coal gangue powder on the properties of filling body	128071
Karaaslan, Cemal / Yener, Engin / Bagatur, Tamer / Polat, Rıza / Gul, Rustem / Hakkı Alma, Mehmet	Synergic effect of fly ash and calcium aluminate cement on the properties of pumice-based geopolymer mortar	128397
Xu, Cheng / Zhang, Zhengqi / Tang, Xiuming / Gui, Zengjian / Liu, Feifei	Synthesis and characterization of one-part alkali-activated grouting materials based on granulated blast furnace slag, uncalcined coal gangue and microscopic fly ash sinking beads	128254
Li, Jing / Wang, Shanshan / Muhammad, Yaseen / Zhang, Honggang / Qiao, Qichen	Synthesis of Hydroxyapatite-Polydopamine-Rubber powder modifier via in-situ growth strategy for the designing of HAP-PDA-RP/SBS modified asphalt	128361
Seifeddine, Khaled / Amziane, Sofiane / Toussaint, Evelyne	Thermal behavior of pervious concrete in dry conditions	128300
Khoukhi, Maatouk / Dar Saleh, Abeer / Mohammad, Ameera F. / Hassan, Ahmed / Abdelbaqi, Shaimaa	Thermal performance and statistical analysis of a new bio-based insulation material produced using grain puffing technique	128311
Wang, Yingbin / Li, Qi / Miao, WenJuan / Su, Ying / He, Xingyang / Strnadel, Bohumír	The thermal performances of cement-based materials with different types of microencapsulated phase change materials	128388
Xu, Yading / Gan, Yidong / Chang, Ze / Wan, Zhi / Schlangen, Erik / Savija, Branko	Towards understanding deformation and fracture in cementitious lattice materials: Insights from multiscale experiments and simulations	128409
Raschia, Simone / Tattolo, Stefano	Use of alternative aggregates for the production of hot-mix asphalt surface layers: A performance evaluation	128369
Singh Sidhu, Amandeep / Siddique, Rafat	Utilisation of crumb tire rubber in development of sustainable metakaolin based high strength concrete	128412
Cheng, Hongzhan / Li, Wentao / Chen, Renpeng / Yi, Yaolin	Workability study of sand-bentonite-cement mixtures for construction of two-phase cut-off wall	128058

About this
data sheet
IssueID
66421
Published on:
13/08/2022
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - August 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - August 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.