Construction and Building Materials - August 2022

Erschienen:	August 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Esselami, Redha / Wilson, William / Tagnit-Hamou, Arezki	An accelerated physical sulfate attack test using an induction period and heat drying: First applications to concrete with different binders including ground glass pozzolan and limestone filler	128046
Chen, Aijiu / Han, Xiaoyan / Wang, Zhihao / Zhang, Qing / Xia, Xiaozhou / Ji, Yanting / Li, Keliang	Analytical evaluation of compressive strength for concrete with rubber fine aggregates and the predictive model	128359
Santana-Carrillo, Jose Luis / Burciaga-Díaz, Oswaldo / Ivan Escalante-Garcia, J.	Blended Portland cement with high limestone loads modified with a waste glass based sodium silicate of different ratios SiO2/Na2O	128411
Meng, Fanjun / Chen, Wanxiang / Ma, Jianjun / Xue, Haien / Xie, Tianxing / Xu, Zhengyang	Bond behaviors of BFRP bars in concrete using carbon fiber rib anchorage	128305
Yusuf, M. / Sarhat, S. / Hajiloo, H. / Green, M. F.	Bond strength between steel reinforcement and RCA concrete during and after exposure to elevated temperatures	128362
Wang, Bin / Zhu, Eryu / Zhang, Zhu / Zhu, Chunqi	Bond-slip behaviour of lightweight aggregate concrete based on virtual crack model with exponential softening characteristics	128349
Chen, Hui / Jiang, Jiwang / Bahia, Hussain U.	Characterization of mortar film distribution of asphalt mixtures containing reclaimed asphalt pavement and its relationship with fracture performance using image analysis method	128338
Yin, Kangting / Jiang, Yaqing / He, Hui / Ren, Jie / Li, Zhenming	Characterization of one-part alkali-activated slag with rice straw ash	128403
Zhang, Kun / Mezhov, Alexander / Schmidt, Wolfram	Chemical and thixotropic contribution to the structural build-up of cementitious materials	128307
Wang, Ning / Ma, Tao / Chen, Feng / Ma, Yuan	Compaction quality assessment of cement stabilized gravel using intelligent compaction technology—A case study	128100
Chen, Xiaoguang / Capiau, Laurent / Reynaert, Ibbe / Zheng, Kai / Gruyaert, Elke / Li, Jiabin	Comparative study on modelling concrete properties using physical and mechanical properties of recycled coarse aggregate	128249
Liao, Qiao / Su, Yuanrui / Yu, Jiangtao / Yu, Kequan	Compression-shear performance and failure criteria of seawater sea-sand engineered cementitious composites with polyethylene fibers	128386
Ogbo, Chibuike / Dave, Eshan V. / Sias, Jo E. / Zegeye, Eyoab	Correlating field and laboratory evolution of curing in cold in-place recycled (CIR) materials	128352
Li, Li / Tao, Jia-Cheng / Zhang, Yang / Sun, Hai-xin / Yuen, Ka-Veng / You, Pei-Bo	Crack fractal analysis of fractured polyethylene fiber reinforced alkali activated mortar under flexural load	128428
Shan, Jingsong / Zhang, Yuan / Wu, Shuyin / Wu, Qiulin / Jiao, Yuying / Du, Yang	Cracking behavior of asphalt pavement with a graded gravel layer based on computational granular mechanics	128199
Zhou, Junlong / Li, Dongsheng	Cyclic compressive behavior of seawater sea-sand concrete after seawater freeze–thaw cycles: Experimental investigation and analytical model	128227
Li, Yanlong / Guo, Hanyu / Zhou, Heng / Li, Yang / Chen, Junhao	Damage characteristics and constitutive model of concrete under uniaxial compression after Freeze-Thaw damage	128171
Li, Guannan / Tan, Yiqiu / Fu, Yongkang / Liu, Pengfei / Fu, Chaoliang / Oeser, Markus	Density, zero shear viscosity and microstructure analysis of asphalt binder using molecular dynamics simulation	128332
Deng, Yue / Hu, Mingjun / Xu, Lei / Ling, Senlin / Ni, Hangtian / Sun, Daquan	Dual roles played by manganese dioxide filler in asphalt pavement material: Chemical modification and healing improvement	128371
Looney, Trevor / Leggs, Maranda / Volz, Jeffery / Floyd, Royce	Durability and corrosion resistance of ultra-high performance concretes for repair	128238
Wang, Z. H. / Wen, H. M. / Zheng, H. / Cheng, J. S.	Dynamic increase factors of concrete-like materials at very high strain rates	128270
Yuan, Jie / Huang, Xin / Chen, Xin / Ge, Qian / Zhang, Zhichao	Early-age mechanical properties and hydration degrees of magnesium phosphate cement paste in freezing winter of cold regions	128337
López-García, Ana B. / Uceda-Rodríguez, Manuel / León-Gutiérrez, Sara / Cobo-Ceacero, Carlos Javier / Moreno-Maroto, José Manuel	Eco-efficient transformation of mineral wool wastes into lightweight aggregates at low firing temperature and associated environmental assessment	128294
Xu, Guizhong / Han, Qiyuan / Wang, Zhenghong / Wu, Jianxin / Yin, Jie	Eco-friendly rice straw as vertical drains for dredged slurry treatment as construction fill	128244
Nemati Giv, Ali / Fu, Qiuni / Yan, Libo / Kasal, Bohumil	The effect of adhesive amount and type on failure mode and shear strength of glued timber-concrete joints	128375
Wang, Zhen / Li, Jinzhen / Huang, Shaowen / Wu, Feilong / Zhu, Jie	Effect of Al2O3/SiO2 ratio on the chroma and phase compositions of white sulfoaluminate cement clinker	128202
Zajac, Maciej / Wieczorek, Marc / Lothenbach, Barbara / Bullerjahn, Frank / Schmidt, Volkmar M. / Ben Haha, Mohsen	Effect of alkali and sulfate on early hydration of Portland cements at high water to cement ratio	128283
Castoldi, Raylane de Souza / de Souza, Lourdes Maria Silva / Souto, Felipe / Liebscher, Marco / Mechtcherine, Viktor / de Andrade Silva, Flávio	Effect of alkali treatment on physical–chemical properties of sisal fibers and adhesion towards cement-based matrices	128363
Baffoe, Elvis / Ghahremaninezhad, Ali	The effect of biomolecules on enzyme-induced calcium carbonate precipitation in cementitious materials	128323
Yang, Fengming / Xie, Jiateng / Wang, Weijie / Wang, Wenlong / Wang, Zengmei	Effect of graphene oxide or triethanolamine-modified graphene oxide on the hydration of calcium sulfoaluminate cement	128315
Yang, Jun / Ding, Qingjun / Zhang, Gaozhan / Hou, Dongshuai / Zhao, Mingyu / Cao, Jierong	Effect of sulfate attack on the composition and micro-mechanical properties of C-A-S-H gel in cement-slag paste: A combined study of nanoindentation and SEM-EDS	128275
Sena da Fonseca, B. / Ferreira Pinto, A. P. / Rodrigues, A. / Piçarra, S. / Santos, C. / Montemor, M. F.	Effect of the pore network and mineralogy of stones on the behavior of alkoxysilane-based consolidants	128383
Zhang, Xiong / Wang, Baomin / Chang, Jun / Fan, Chengcheng / Liu, Ze	Effect of zeolite contents on mineral evolution and heavy metal solidification in alkali-activated MSWI fly ash specimens	128309
Rusheng, Qian / Yunsheng, Zhang / Yu, Zhang / Cheng, Liu / Lin, Yang / Deyu, Kong	Effects of aqueous-phase speciation on Portland cement and supplementary cementitious materials as reflected using zeta potential of powder suspensions	128258
Chen, Huabao / Liu, Yuhua / Cui, Hao / Zhang, Wenyi / Hu, Linchao / Mao, Linqiang	Effects of electric arc furnace slag on promoting quality and environmental safety of fired bricks incorporating municipal solid waste incineration fly ash	128327
Lin, Hongwei / Han, Yanfeng / Liang, Siming / Gong, Fuyuan / Han, Song / Shi, Changwei / Feng, Peng	Effects of low temperatures and cryogenic freeze-thaw cycles on concrete mechanical properties: A literature review	128287
Lin, Chenlong / Wang, Siyu / Ma, Wentao / Yan, Yuhong / Lu, Yiyan	Effects of sodium aluminate on the performance of seawater sea-sand engineered cementitious composites	128422
Mirdad, Md Abdul Hamid / Jucutan, Arman / Khan, Rafid / Niederwestberg, Jan / Chui, Ying Hei	Embedment and withdrawal stiffness predictions of self-tapping screws in timber	128394
Choi, Eunsoo / Ostadrahimi, Alireza / Kim, Woo Jin	Enhancement of compressive strength and strain ductility of SMA fiber reinforced concrete considering fiber’s aspect ratios	128346
Han, Ding / Zhu, Chaochao / Du, Qingcan / Hu, Huimin	Establishment and verification of different fixed parameter combinations of the 2S2P1D model for asphalt mixture	128379
Zhang, Zhao / Liu, Kai / Chong, Dan / Niu, Dongyu / Lin, Peng / Liu, Xueyan / Niu, Yanhui / Jing, Ruxin	Evaluation of photocatalytic micro-surfacing mixture: road performance, vehicle exhaust gas degradation capacity and environmental impacts	128367
Farhan, Khatib Zada / Megat Johari, Megat Azmi / Demirboğa, Ramazan	Evaluation of properties of steel fiber reinforced GGBFS-based geopolymer composites in aggressive environments	128339
Pereira, Mara Monaliza Linhares / Silva Capuzzo, Valdirene Maria / Lameiras, Rodrigo de Melo	Evaluation of use of marble and granite cutting waste to the production of self-compacting concrete	128261
Ding, Zhenzhao / Quy, Nguyen Xuan / Kim, JiHoon / Hama, Yukio	Evaluations of frost and scaling resistance of fly ash concrete in terms of changes in water absorption and pore structure under the accelerated carbonation conditions	128273
Yang, Ting / Xu, Shenchun / Liu, Zhongxian / Li, Jun / Wu, Pengtao / Yang, Yekai / Wu, Chengqing	Experimental and numerical investigation of bond behavior between geopolymer based ultra-high-performance concrete and steel bars	128220
Seifeddine, Khaled / Amziane, Sofiane / Toussaint, Evelyne	Experimental investigation of physical characteristics to improve the cooling effect of permeable pavements	128342
Liu, Chuankun / Wei, Ya	Experimental study on interface performance between implantable cement-based sensor and matrix concrete	128316
Wanare, Ram / Jayanthi, Prathyusha / Iyer, Kannan K. R.	Experimental study on sustainable stabilization of marine soil with ultrafine slag and activator for controlling its cracking characteristics	128310
Park, Jae-Chan / Jung, Hyung-Jo	An experimental study on the steel corrosion behavior in NaCl-immersed concrete under hydraulic pressure	128347
He, Lei / Chu, Longjia / Wang, HuiChen / Fwa, T. F.	Experimental-cum-Numerical approach for thermal conductivity determination of asphalt paving mixture and its constituents	128357
Srivastava, Sumit / Jacklin, Rob / Snellings, Ruben / Barker, Richard / Spooren, Jeroen / Cool, Pegie	Experiments and modelling to understand FeCO3 cement formation mechanism: time-evolution of CO2-species, dissolved-Fe, and pH during CO2-induced dissolution of Fe(0)	128281
Zhang, Xiaofeng / Luo, Lisheng / Xie, Xinran / Zhang, Yongqiang / Li, Zheng	Flexural bearing capacity and stiffness of stiffened hollow glulam beams: Experiments, finite element analysis and calculation theory	128407
Ilangovan, Manikandan / Navada, Akash P. / Guna, Vijaykumar / Touchaleaume, François / Saulnier, Benjamin / Grohens, Yves / Reddy, Narendra	Hybrid biocomposites with high thermal and noise insulation from discarded wool, poultry feathers, and their blends	128324
Wang, Ziyan / Shui, Zhonghe / Li, Zhiwei / Sun, Tao / Ye, Zhiyi	Hydration characterization of Mg2+ blended excess-sulphate phosphogypsum slag cement system during early age	128191
Mazzuca, Pietro / Firmo, João P. / Correia, João R. / Castilho, Eloísa	Influence of elevated temperatures on the mechanical properties of glass fibre reinforced polymer laminates produced by vacuum infusion	128340
Qin, Wang / Haiyu, Zheng / Yue, Wang / Sihan, Shan / Kejun, Liu	Influence of phosphorus impurities on the structure and performance of cellulose-ether-modified gypsum	128230
Yang, Shuyan / Han, Min / Chen, Xiaolong / Song, Junjie / Yang, Jiansen	Influence of sulfate crystallization on bond-slip behavior between deformed rebar and concrete subjected to combined actions of dry-wet cycle and freeze-thaw cycle	128368
Zhang, Zhao / Cui, Yu-Jun / Yang, Jin-Wen / Mokni, Nadia	Investigation into the hydro-mechanical behaviour and microstructural evolution of MX80 bentonite pellet upon wetting/drying	128319
Yu, Zhihui / Wu, Lishan / Zhang, Cong / Chen, Qingzuo / Bangi, Toshiyuki	Investigation of SAP content on the shrinkage and tensile properties of ultra-high performance concrete	128402
Li, Chen / Ma, Feng / Fu, Zhen / Dai, Jiasheng / Wen, Yalu / Shi, Ke	Investigation of the solution effects on asphalt binder and mastic through molecular dynamics simulations	128314
Zhang, Weizhuo / Zheng, Chenhao / Li, Zhenlin / Jin, Hesong / Liu, Jun / Zhu, Jihua / Liu, Wei / Xing, Feng	Investigation on mechanical properties improvement of seawater engineered cementitious composites (ECC) using FA/LC2	128271
Consoli, Nilo Cesar / Silvano, Lukas Wereszko / Lotero, Andres / Scheuermann Filho, Hugo Carlos / Moncaleano, Cindy Johanna / Cristelo, Nuno	Key parameters establishing alkali activation effects on stabilized rammed earth	128299
Ali, Ayman / Kabir, Sk Faisal / Al-Badr, Basel / Alfalah, Ahmad / Xie, Zhaoxing / DeCarlo, Christopher / Elshaer, Mohamed / Mehta, Yusuf	Laboratory performance of dense graded asphalt mixtures prepared using highly polymer modified binders containing corn oil as softening agent	128336
ul Haq, Inzimam / Elahi, Ayub / Nawaz, Adnan / Aamir Qadeer Shah, Syed / Ali, Khawar	Mechanical and durability performance of concrete mixtures incorporating bentonite, silica fume, and polypropylene fibers	128223
Wang, Suxi / Li, Haitao / Cheng, Gensheng / Xiong, Zhenhua / Ashraf, Mahmud	Mechanical behavior of bolted steel laminated bamboo lumber connections loaded perpendicular to grain	128302
Li, Gengying / Wang, Linbing / Yu, Jing / Yi, Biliang / He, Chunbao / Wang, Zhongkun / Leung, Christopher K. Y.	Mechanical properties and material characterization of cement mortar incorporating CNT-engineered polyvinyl alcohol latex	128320
Zhang, Longjian / Mo, Kim Hung / Yap, Soon Poh / Gencel, Osman / Ling, Tung-Chai	Mechanical strength, water resistance and drying shrinkage of lightweight hemihydrate phosphogypsum-cement composite with ground granulated blast furnace slag and recycled waste glass	128232
Zolotarev, Victor	Methods for determining stresses at key temperatures	128365
Zhang, Zaiyu / Wu, Xiaohong / Hu, Gaoxing / Sun, Qing	Numerical study on triaxial compressive behavior of engineered cementitious composites confined by circular steel tubes	128285
Feng, Zhuojun / Zhou, Yingwu / Sui, Lili / Zhu, Zhongfeng	Optimal design of a low-cost high-performance hybrid fiber engineered cementitious composites	128372
Dong, Zejiao / Guo, Zishuo / Zhang, Huiquan / Li, Jianguo	Optimal design of prefabricated base joint for asphalt pavement based on finite element method and field deflection test	128301
Wu, Jiacheng / Zhang, Yong / Li, Kunyuan / Su, Liang	Origami-inspired metamaterials hierarchical structure with tailorable crushing behavior	128328
Kang, Shinhyu / Boyd, Braden / Ley, M. Tyler	Performance and prediction of non-traditional coal-ash in concrete with the Particle Model	128170
Lu, Juetian / Zhang, Henghua / Yang, Hui / Wang, Jiabang	Performance of resin–cement composite clad modified vitrified beads	128317
Khan, Shahbaz / Ashish, Prabin Kumar / Kannelli, Venkatasrinivas / Hossain, Kamal / Nagabhushana, M. N. / Tiwari, Devesh	Potential application of over-burnt brick and fly ash for sustainable inverted pavement structure	128298
Netinger Grubeša, Ivanka / Marković, Berislav / Nyarko, Marijana Hadzima / Krstić, Hrvoje / Brdarić, Jelena / Filipović, Nikolina / Szenti, Imre / Kukovecz, Ákos	Potential of fruit pits as aggregate in concrete	128366
Farouk, Abdulwarith Ibrahim Bibi / Zhu, Jinsong / Ding, Jingnan / Haruna, S. I.	Prediction and uncertainty quantification of ultimate bond strength between UHPC and reinforcing steel bar using a hybrid machine learning approach	128360
Abdulalim Alabdullah, Anas / Iqbal, Mudassir / Zahid, Muhammad / Khan, Kaffayatullah / Amin, Muhammad Nasir / Jalal, Fazal E.	Prediction of rapid chloride penetration resistance of metakaolin based high strength concrete using light GBM and XGBoost models by incorporating SHAP analysis	128296
Abdel-Gawwad, Hamdy A. / Tawfik, Taher A. / Sikora, Pawel / Abd Elrahman, Mohamed	Preparation and characterization of a novel alkali-activated magnesite cement	128384
Debnath, N. K. / Pabbisetty, V. K. / Sarkar, K. / Singh, A. / Majhi, M. R. / Singh, V. K.	Preparation and characterization of semi-silica insulation refractory by utilizing lignite fly ash waste materials	128321
Jian, Shouwei / Cheng, Cheng / Lv, Yang / Wang, Caifeng / Tan, Hongbo / Li, BaoDong	Preparation and evaluation of high-fluid backfill materials from construction spoil	128370
Das, Shaswat Kumar / Adediran, Adeolu / Kaze, Cyriaque Rodrigue / Mustakim, Syed Mohammed / Leklou, Nordine	Production, characteristics, and utilization of rice husk ash in alkali activated materials: An overview of fresh and hardened state properties	128341
Li, Jincheng / Sun, Zhigao / Wang, Lei / Yang, Xingchun / Zhang, Dongliang / Zhang, Xiaowei / Wang, Mitang	Properties and mechanism of high-magnesium nickel slag-fly ash based geopolymer activated by phosphoric acid	128256
Islam, Md. Mashfiqul / Zhang, Qian / Jin, Qingxu	A review of existing codes and standards on design factors for UHPC placement and fiber orientation	128308
Jin, Xiaodong / Wu, Xinyi / Cui, Suping / Wang, Wanfu / Zhang, Yao / Sun, Shibing / Sun, Dawei	A robust adhesion between extruded polystyrene foam and mortar through different chemical linkages under ultraviolet-ozone irradiation	128414
Babagoli, Rezvan / Nasr, Danial / Ameli, Alireza / Moradi, Mohammad Reza	Rutting and fatigue properties of modified binders with polymer and titanium dioxide nanoparticles	128423
Raza, Ali / Ouni, Mohamed Hechmi El / Azab, Marc / Ali, Khawar / Haider, Hammad / Rashedi, Ahmad	A scientometric review on mechanical and durability performance of geopolymer Paste: Effect of various raw materials	128297
Wang, Wei-Chih / Nguyen, Ngoc-Mai / Cao, Minh-Tu	Smart ensemble machine learner with hyperparameter-free for predicting bond capacity of FRP-to-concrete interface: Multi-national data	128158
Liu, Yiliang / Mo, Zongyun / Su, Youpo / Chen, Yanhua	State-of-the-art controlled low-strength materials using incineration industrial by-products as cementitious materials	128391
Hamla, Wafa / Benamara, Dalila / Noui, Ammar	Statistical modeling of physical and mechanical responses of roller-compacted sand concrete made with ternary sand using the experimental design method	128354
Al-Subari, Lutf / Ekinci, Abdullah	Strength and durability assessment of shredded tire rubber stabilized artificially cemented alluvial clay	128312
Alsaif, Abdulaziz / Alharbi, Yousef R.	Strength, durability and shrinkage behaviours of steel fiber reinforced rubberized concrete	128295
Zhang, Jianjun / Yao, Baicong / Sun, Yuanjun / Wang, Meng / Sun, Qi / Sun, Chuang / Wang, Baoqiang / Lin, Zenghua	Study of the effects of an ionic stabilizer on the permeability of gangue bonding material	128325
Song, Wenhao / Wang, Qing / Qu, Lei / Li, Xiaodong / Xu, Shuangshuang	Study of water absorption and corrosion resistance of the mortar with waste marble powder	128235
Han, Zhao / Zhang, Yunsheng / Qiao, Hongxia / Feng, Qiong / Xue, Cuizhen / Shang, Minggang	Study on axial compressive behavior and damage constitutive model of manufactured sand concrete based on fluidity optimization	128176
Yuan, Ji / Li, Dongbin / Li, Weilong / Yang, Hailu / Zhang, Wenhua / Wang, Linbing / Wang, Jianjun / Xiong, Zhenzhen	Study on frost resistance of EPS concrete based on EPS beads wrapping modification	128400
Chen, Fang / Zhang, Liaojun / Zou, Chenyang / Zhu, Xiaoliang / Fang, Qinghe / Xu, Saihui	Study on influencing factors of shear characteristics of rock-fill concrete layer of iron tailings as fine aggregate	128213
Wang, Chonghui / Zhou, Xiaodong / Liu, Pengfei / Lu, Guoyang / Wang, Hainian / Oeser, Markus	Study on pre-compaction of pavement graded gravels via imaging technologies, artificial intelligent and numerical simulations	128380
Wang, Duanyi / Chen, Guangwei / Chen, Zhaojie / Tang, Cheng	Study on preparation method of strength and morphology controlled aggregates used in asphalt mixture	128189
Qiu, Jisheng / Cheng, Kun / Zhang, Ruyi / Gao, Yang / Guan, Xiao	Study on the influence mechanism of activated coal gangue powder on the properties of filling body	128071
Karaaslan, Cemal / Yener, Engin / Bagatur, Tamer / Polat, Rıza / Gul, Rustem / Hakkı Alma, Mehmet	Synergic effect of fly ash and calcium aluminate cement on the properties of pumice-based geopolymer mortar	128397
Xu, Cheng / Zhang, Zhengqi / Tang, Xiuming / Gui, Zengjian / Liu, Feifei	Synthesis and characterization of one-part alkali-activated grouting materials based on granulated blast furnace slag, uncalcined coal gangue and microscopic fly ash sinking beads	128254
Li, Jing / Wang, Shanshan / Muhammad, Yaseen / Zhang, Honggang / Qiao, Qichen	Synthesis of Hydroxyapatite-Polydopamine-Rubber powder modifier via in-situ growth strategy for the designing of HAP-PDA-RP/SBS modified asphalt	128361
Seifeddine, Khaled / Amziane, Sofiane / Toussaint, Evelyne	Thermal behavior of pervious concrete in dry conditions	128300
Khoukhi, Maatouk / Dar Saleh, Abeer / Mohammad, Ameera F. / Hassan, Ahmed / Abdelbaqi, Shaimaa	Thermal performance and statistical analysis of a new bio-based insulation material produced using grain puffing technique	128311
Wang, Yingbin / Li, Qi / Miao, WenJuan / Su, Ying / He, Xingyang / Strnadel, Bohumír	The thermal performances of cement-based materials with different types of microencapsulated phase change materials	128388
Xu, Yading / Gan, Yidong / Chang, Ze / Wan, Zhi / Schlangen, Erik / Savija, Branko	Towards understanding deformation and fracture in cementitious lattice materials: Insights from multiscale experiments and simulations	128409
Raschia, Simone / Tattolo, Stefano	Use of alternative aggregates for the production of hot-mix asphalt surface layers: A performance evaluation	128369
Singh Sidhu, Amandeep / Siddique, Rafat	Utilisation of crumb tire rubber in development of sustainable metakaolin based high strength concrete	128412
Cheng, Hongzhan / Li, Wentao / Chen, Renpeng / Yi, Yaolin	Workability study of sand-bentonite-cement mixtures for construction of two-phase cut-off wall	128058

Über diese
Datenseite
IssueID
66421
Veröffentlicht am:
13.08.2022
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - August 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - August 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.