Construction and Building Materials - April 2021

Published:	April 2021

Articles in this Issue

Author(s)	Title	Page(s)
Wang, Yifei / Shi, Caijun / Ma, Yihan / Xiao, Yuchong / Liu, Yi	Accelerators for shotcrete – Chemical composition and their effects on hydration, microstructure and properties of cement-based materials	122557
Siddique, Salman / Jang, Jeong Gook	Acid and sulfate resistance of seawater based alkali activated fly ash: A sustainable and durable approach	122601
Tian, Kaige / Wang, Yanshuai / Hong, Shuxian / Zhang, Jinrui / Hou, Dongshuai / Dong, Biqin / Xing, Feng	Alkali-activated artificial aggregates fabricated by red mud and fly ash: Performance and microstructure	122552
Hafez, Hisham / Kassim, Dany / Kurda, Rawaz / Silva, Rui Vasco / de Brito, Jorge	Assessing the sustainability potential of alkali-activated concrete from electric arc furnace slag using the ECO2 framework	122559
Wei, Wei / Ding, Lieyun / Luo, Hanbin / Li, Chen / Li, Guowei	Automated bughole detection and quality performance assessment of concrete using image processing and deep convolutional neural networks	122576
Li, Ke / Liu, Weikang / Zhang, Kai / Wang, Xinling / Zhu, Juntao / Sheikh, Shamim	Bond behavior of stainless steel wire ropes embedded in engineered cementitious composites	122622
Gao, Hongyu / Wang, Weiguang / Liao, Hongqiang / Cheng, Fangqin	Characterization of light foamed concrete containing fly ash and desulfurization gypsum for wall insulation prepared with vacuum foaming process	122411
Bi, Haifeng / Zhang, Wenlong / Xu, Xingang / Ming, Anqi / Shen, Ying / Wang, Shoude / Cheng, Xin	Chloride binding and transport characteristic of phosphoaluminate cement-based marine sand coating subjected to marine environment	122505
Villaquirán-Caicedo, Mónica A. / Mejía de Gutiérrez, Ruby	Comparison of different activators for alkaline activation of construction and demolition wastes	122599
Ma, Guoliang / Zhang, Huyuan / Ji, Ze / Tan, Yu	Comparison of the swelling pressure of bentonite pellet-contained materials and powder	122531
Wang, Jian / Wang, Shu / Zuo, Yingfeng / Xiao, Junhua / Wu, Yiqiang	Construction of compatible interface of straw/magnesium oxychloride lightweight composites by coupling agents	122600
Pasupathy, Kirubajiny / Cheema, Didar Singh / Sanjayan, Jay	Durability performance of fly ash-based geopolymer concrete buried in saline environment for 10 years	122596
Hu, Bo / Meng, Teng-Fei / Li, Yuan / Li, Dao-Zhong / Chen, Long	Dynamic splitting tensile bond behavior of new-to-old concrete interfaces	122570
Barnaure, Mircea / Bonnet, Stéphanie / Poullain, Philippe	Earth buildings with local materials: Assessing the variability of properties measured using non-destructive methods	122613
Moradi, Saeed / Shahnoori, Shore	Eco-friendly mix for Roller-Compacted Concrete: Effects of Persian-Gulf-Dredged marine sand on durability and resistance parameters of concrete	122555
Tang, Naipeng / Huang, Weidong / Hao, Gengren	Effect of aging on morphology, rheology, and chemical properties of highly polymer modified asphalt binders	122595
Mousavi, Seyed Sina / Guizani, Lotfi / Bhojaraju, Chandrasekhar / Ouellet-Plamondon, Claudiane	The effect of air-entraining admixture and superabsorbent polymer on bond behaviour of steel rebar in pre-cracked and self-healed concrete	122568
Salehfard, Reza / Behbahani, Hamid / Dalmazzo, Davide / Santagata, Ezio	Effect of colloidal instability on the rheological and fatigue properties of asphalt binders	122563
Sun, Junbo / Lin, Sen / Zhang, Genbao / Sun, Yuantian / Zhang, Junfei / Chen, Changfu / Morsy, Amr M. / Wang, Xiangyu	The effect of graphite and slag on electrical and mechanical properties of electrically conductive cementitious composites	122606
Ye, Junhong / Cui, Can / Yu, Jiangtao / Yu, Kequan / Dong, Fangyuan	Effect of polyethylene fiber content on workability and mechanical-anisotropic properties of 3D printed ultra-high ductile concrete	122586
Mendoza Reales, Oscar Aurelio / Carisio, Pedro Almeida / dos Santos, Thaís Carvalho / Pearl, William C. / Filho, Romildo Dias Toledo	Effect of pozzolanic micro and nanoparticles as secondary fillers in carbon nanotubes/cement composites	122603
Shi, Jinyan / Liu, Baoju / Zhou, Feng / Shen, Shuai / Guo, Aofei / Xie, Youjun	Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete	122562
Sun, Bochao / Noguchi, Takafumi / Cai, Gaochuang / Zhao, Weijian	Effect of temperature and relative humidity on the development of the compressive strength of surface-layer cement mortar	122626
Yu, Huanan / Yao, Ding / Qian, Guoping / Cai, Jun / Gong, Xiangbing / Cheng, Lieguang	Effect of ultraviolet aging on dynamic mechanical properties of SBS modified asphalt mortar	122328
Yang, Song / Zhang, Jingbin / An, Xuehui / Qi, Bing / Shen, Dejian / Lv, Miao	Effects of fly ash and limestone powder on the paste rheological thresholds of self-compacting concrete	122560
Li, Shaojie / Zhang, Yuling / Lin, Shaosen / Yan, Jun / Du, Shiguo	Effects of nano-SiO2 coated multi-walled carbon nanotubes on mechanical properties of cement-based composites	122577
Sikora, Pawel / Chung, Sang-Yeop / Liard, Maxime / Lootens, Didier / Dorn, Tobias / Kamm, Paul H. / Stephan, Dietmar / Abd Elrahman, Mohamed	The effects of nanosilica on the fresh and hardened properties of 3D printable mortars	122574
Ormellese, Marco / Beretta, Silvia / Brugnetti, Fabio / Brenna, Andrea	Effects of non-stationary stray current on carbon steel buried pipelines under cathodic protection	122645
Moghaddas, Amirreza / Mostofinejad, Davood / Saljoughian, Alireza / Ilia, Elaheh	An empirical FRP-concrete bond-slip model for externally-bonded reinforcement on grooves	122575
Zhang, Jun / Yu, Zihao / Tang, Yuxiang / Shen, Jie / Chen, Hongniao	Fracture properties of concrete under cyclic loading	122610
Liu, Huiyuan / Elchalakani, Mohamed / Karrech, Ali / Yehia, Sherif / Yang, Bo	High strength flowable lightweight concrete incorporating low C3A cement, silica fume, stalite and macro-polyfelin polymer fibres	122410
Mohan, Manu K. / Pillai, Radhakrishna G. / Santhanam, Manu / Gettu, Ravindra	High-performance cementitious grout with fly ash for corrosion protection of post-tensioned concrete structures	122612
Sheikhhosseini Lori, Iman / Toufigh, Mohammad Mohsen / Toufigh, Vahid	Improvement of poorly graded sandy soil by using copper mine tailing dam sediments-based geopolymer and silica fume	122591
Manjur A Elahi, Md / Shearer, Christopher R. / Reza, Abu Naser Rashid / Saha, Ashish Kumer / Khan, Md Nabi Newaz / Hossain, Md Maruf / Sarker, Prabir Kumar	Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): A review	122628
Du, Wei / Liu, Quantao / Lin, Runsheng / Yu, Jianying	Influence of external environment on self-repairing ability of the cement-based materials containing paraffin/toluene-di-isocyanate microcapsules	122584
Liu, Rentai / Zhang, Chunyu / Pei, Yan / Chen, Mengjun / Liu, Haojie / Li, Xiuhao	Influence of flocculation effect on the apparent viscosity of cement slurry and analysis of different influencing factors	122602
Werani, Matthias / Lei, Lei	Influence of side chain length of MPEG – based polycarboxylate superplasticizers on their resistance towards intercalation into clay structures	122621
Jin, Hesong / Liu, Jiaying / Jiang, Zhilu / Zhou, Hao / Liu, Jun	Influence of the rainfall intensity on the chloride ion distribution in concrete with different levels of initial water saturation	122561
Zhang, Mengya / Hao, Peiwen / Li, Yan	Interfacial adhesive property in “asphalt mixture-PMA copolymer-steel plate” system: Experimental and molecular dynamics simulation	122529
Hany, Engy / Fouad, Nabil / Abdel-Wahab, Mona / Sadek, Ehab	Investigating the mechanical and thermal properties of compressed earth bricks made by eco-friendly stabilization materials as partial or full replacement of cement	122535
Zhou, Lujun / Yang, Shanwu	Investigation on crack propagation in band-like rust layers on weathering steel	122564
van Blokland, Joran / Nasir, Vahid / Cool, Julie / Avramidis, Stavros / Adamopoulos, Stergios	Machine learning-based prediction of internal checks in weathered thermally modified timber	122193
Chen, Keyu / Wu, Dazhi / Yi, Ming / Cai, Qimao / Zhang, Zhenying	Mechanical and durability properties of metakaolin blended with slag geopolymer mortars used for pavement repair	122566
Ahmad, Muhammad Riaz / Chen, Bing / Shah, Syed Farasat Ali	Mechanical and microstructural characterization of bio-concrete prepared with optimized alternative green binders	122533
Ferreira Pinto, A. P. / Sena da Fonseca, B. / Vaz Silva, D.	Mechanical characterization of historical rubble stone masonry and its correlation with the masonry quality assessment	122168
Charkhtab Moghaddam, Shahin / Madandoust, Rahmat / Jamshidi, Morteza / Nikbin, Iman M.	Mechanical properties of fly ash-based geopolymer concrete with crumb rubber and steel fiber under ambient and sulfuric acid conditions	122571
Khodaparast, Mahdi / Rajabi, Ali M. / Mohammadi, Mostafa	Mechanical properties of silty clay soil treated with a mixture of lime and zinc oxide nanoparticles	122548
Zhou, Yingwu / Zheng, Shuyue / Huang, Xiaoxu / Xi, Bin / Huang, Zhenyu / Guo, Menghuan	Performance enhancement of green high-ductility engineered cementitious composites by nano-silica incorporation	122618
Huang, Jiandong / Losa, Massimo / Leandri, Pietro / Kumar, Shiva G. / Zhang, Junfei / Sun, Yuantian	Potential anti-vibration pavements with damping layer: Finite element (FE) modeling, validation, and parametrical studies	122550
Alqahtani, Fahad K. / Rashid, Khuram / Zafar, Idrees / Khan, M. Iqbal / Ababtain, Abdulrohman A.	Production of sustainable green mortar by ultrahigh utilization of fly ash: Technical, economic and environmental assessment	122617
Chen, Shen-En / Shanmugam, Navanit Sri / Boyajian, David / Chavan, Vidya Subhash / Weber, Erika / Baarsons, Keith	Prototyping rail track for micro-people movers using additive manufacturing: Failure topology characterization	122623
Park, Solmoi / Moon, Hoon / Kim, Ji-Hyun / Lee, Minhee / Chung, Chul-Woo	Reaction of hydrated cement paste with supercritical carbon dioxide	122615
Nunes, Vitor A. / Borges, Paulo H. R.	Recent advances in the reuse of steel slags and future perspectives as binder and aggregate for alkali-activated materials	122605
Gou, Hongxiang / Zhu, Hongbo / Zhou, Haiyun / Yang, Zhenghong	Reinforcement mechanism of orientally distributed steel fibers on ultra-high-performance concrete	122646
Wang, Lan / Cui, Shichao / Feng, Lei	Research on the influence of ultraviolet aging on the interfacial cracking characteristics of warm mix crumb rubber modified asphalt mortar	122556
Sun, Fasen / Yang, Shuangqiao / Bai, Shibing / Wang, Qi	Reuse of Pan-milled P-XLPE cable powder as additive for asphalt to improve thermal stability and decrease processing viscosity	122593
Wen, Yankai / Guo, Naisheng / Wang, Lin / Jiao, Bozong / Li, Wei	Rheological properties and microscopic mechanism of rock asphalt composite modified asphalts	122543
Zhang, Nan / Hedayat, Ahmadreza / Bolaños Sosa, Héctor Gelber / González Cárdenas, Juan José / Salas Álvarez, Guido Edgard / Ascuña Rivera, Victor Benigno	Specimen size effects on the mechanical behaviors and failure patterns of the mine tailings-based geopolymer under uniaxial compression	122525
Kumar, Amit / Kumar, Virendra / Prasad, Brajkishor	Strength development and flexural behavior of reinforced concrete beam using one-part alkali-activated binder	122619
Meng, Dan / Wu, Xuemin / Quan, Hongzhu / Zhu, Chongji	A strength-based mix design method for recycled aggregate concrete and consequent durability performance	122616
Gao, Yuan / Jing, Hongwen / Fu, Guangping / Zhao, Zhenlong / Shi, Xinshuai	Studies on combined effects of graphene oxide-fly ash hybrid on the workability, mechanical performance and pore structures of cementitious grouting under high W/C ratio	122578
Peng, Lei / Chen, Bing	Study on the basic properties and mechanism of waste sludge solidified by magnesium phosphate cement containing different active magnesium oxide	122609
Segundo, Iran Rocha / Silva, Leonel / Palha, Carlos / Freitas, Elisabete / Silva, Hugo	Surface rehabilitation of Portland cement concrete (PCC) pavements using single or double surface dressings with soft bitumen, conventional or modified emulsions	122611
Sun, Jing / Daliri, Ali / Lu, Guoxing / Liu, Dongying / Xia, Fukun / Gong, Ao	Tensile behaviour of titanium-based carbon-fibre/epoxy laminate	122633
Pae, Junil / Zhang, Yi / Poh, Leong Hien / Moon, Juhyuk	Three-dimensional transport properties of mortar with a high water-to-cement ratio using X-ray computed tomography	122608
Zhang, Kun / Pan, Lisha / Li, Jiacheng / Lin, Chang	What is the mechanism of the fiber effect on the rheological behavior of cement paste with polycarboxylate superplasticizer?	122542

About this
data sheet
IssueID
66194
Published on:
17/06/2022
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - April 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - April 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.