Construction and Building Materials - April 2021

Erschienen:	April 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wang, Yifei / Shi, Caijun / Ma, Yihan / Xiao, Yuchong / Liu, Yi	Accelerators for shotcrete – Chemical composition and their effects on hydration, microstructure and properties of cement-based materials	122557
Siddique, Salman / Jang, Jeong Gook	Acid and sulfate resistance of seawater based alkali activated fly ash: A sustainable and durable approach	122601
Tian, Kaige / Wang, Yanshuai / Hong, Shuxian / Zhang, Jinrui / Hou, Dongshuai / Dong, Biqin / Xing, Feng	Alkali-activated artificial aggregates fabricated by red mud and fly ash: Performance and microstructure	122552
Hafez, Hisham / Kassim, Dany / Kurda, Rawaz / Silva, Rui Vasco / de Brito, Jorge	Assessing the sustainability potential of alkali-activated concrete from electric arc furnace slag using the ECO2 framework	122559
Wei, Wei / Ding, Lieyun / Luo, Hanbin / Li, Chen / Li, Guowei	Automated bughole detection and quality performance assessment of concrete using image processing and deep convolutional neural networks	122576
Li, Ke / Liu, Weikang / Zhang, Kai / Wang, Xinling / Zhu, Juntao / Sheikh, Shamim	Bond behavior of stainless steel wire ropes embedded in engineered cementitious composites	122622
Gao, Hongyu / Wang, Weiguang / Liao, Hongqiang / Cheng, Fangqin	Characterization of light foamed concrete containing fly ash and desulfurization gypsum for wall insulation prepared with vacuum foaming process	122411
Bi, Haifeng / Zhang, Wenlong / Xu, Xingang / Ming, Anqi / Shen, Ying / Wang, Shoude / Cheng, Xin	Chloride binding and transport characteristic of phosphoaluminate cement-based marine sand coating subjected to marine environment	122505
Villaquirán-Caicedo, Mónica A. / Mejía de Gutiérrez, Ruby	Comparison of different activators for alkaline activation of construction and demolition wastes	122599
Ma, Guoliang / Zhang, Huyuan / Ji, Ze / Tan, Yu	Comparison of the swelling pressure of bentonite pellet-contained materials and powder	122531
Wang, Jian / Wang, Shu / Zuo, Yingfeng / Xiao, Junhua / Wu, Yiqiang	Construction of compatible interface of straw/magnesium oxychloride lightweight composites by coupling agents	122600
Pasupathy, Kirubajiny / Cheema, Didar Singh / Sanjayan, Jay	Durability performance of fly ash-based geopolymer concrete buried in saline environment for 10 years	122596
Hu, Bo / Meng, Teng-Fei / Li, Yuan / Li, Dao-Zhong / Chen, Long	Dynamic splitting tensile bond behavior of new-to-old concrete interfaces	122570
Barnaure, Mircea / Bonnet, Stéphanie / Poullain, Philippe	Earth buildings with local materials: Assessing the variability of properties measured using non-destructive methods	122613
Moradi, Saeed / Shahnoori, Shore	Eco-friendly mix for Roller-Compacted Concrete: Effects of Persian-Gulf-Dredged marine sand on durability and resistance parameters of concrete	122555
Tang, Naipeng / Huang, Weidong / Hao, Gengren	Effect of aging on morphology, rheology, and chemical properties of highly polymer modified asphalt binders	122595
Mousavi, Seyed Sina / Guizani, Lotfi / Bhojaraju, Chandrasekhar / Ouellet-Plamondon, Claudiane	The effect of air-entraining admixture and superabsorbent polymer on bond behaviour of steel rebar in pre-cracked and self-healed concrete	122568
Salehfard, Reza / Behbahani, Hamid / Dalmazzo, Davide / Santagata, Ezio	Effect of colloidal instability on the rheological and fatigue properties of asphalt binders	122563
Sun, Junbo / Lin, Sen / Zhang, Genbao / Sun, Yuantian / Zhang, Junfei / Chen, Changfu / Morsy, Amr M. / Wang, Xiangyu	The effect of graphite and slag on electrical and mechanical properties of electrically conductive cementitious composites	122606
Ye, Junhong / Cui, Can / Yu, Jiangtao / Yu, Kequan / Dong, Fangyuan	Effect of polyethylene fiber content on workability and mechanical-anisotropic properties of 3D printed ultra-high ductile concrete	122586
Mendoza Reales, Oscar Aurelio / Carisio, Pedro Almeida / dos Santos, Thaís Carvalho / Pearl, William C. / Filho, Romildo Dias Toledo	Effect of pozzolanic micro and nanoparticles as secondary fillers in carbon nanotubes/cement composites	122603
Shi, Jinyan / Liu, Baoju / Zhou, Feng / Shen, Shuai / Guo, Aofei / Xie, Youjun	Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete	122562
Sun, Bochao / Noguchi, Takafumi / Cai, Gaochuang / Zhao, Weijian	Effect of temperature and relative humidity on the development of the compressive strength of surface-layer cement mortar	122626
Yu, Huanan / Yao, Ding / Qian, Guoping / Cai, Jun / Gong, Xiangbing / Cheng, Lieguang	Effect of ultraviolet aging on dynamic mechanical properties of SBS modified asphalt mortar	122328
Yang, Song / Zhang, Jingbin / An, Xuehui / Qi, Bing / Shen, Dejian / Lv, Miao	Effects of fly ash and limestone powder on the paste rheological thresholds of self-compacting concrete	122560
Li, Shaojie / Zhang, Yuling / Lin, Shaosen / Yan, Jun / Du, Shiguo	Effects of nano-SiO2 coated multi-walled carbon nanotubes on mechanical properties of cement-based composites	122577
Sikora, Pawel / Chung, Sang-Yeop / Liard, Maxime / Lootens, Didier / Dorn, Tobias / Kamm, Paul H. / Stephan, Dietmar / Abd Elrahman, Mohamed	The effects of nanosilica on the fresh and hardened properties of 3D printable mortars	122574
Ormellese, Marco / Beretta, Silvia / Brugnetti, Fabio / Brenna, Andrea	Effects of non-stationary stray current on carbon steel buried pipelines under cathodic protection	122645
Moghaddas, Amirreza / Mostofinejad, Davood / Saljoughian, Alireza / Ilia, Elaheh	An empirical FRP-concrete bond-slip model for externally-bonded reinforcement on grooves	122575
Zhang, Jun / Yu, Zihao / Tang, Yuxiang / Shen, Jie / Chen, Hongniao	Fracture properties of concrete under cyclic loading	122610
Liu, Huiyuan / Elchalakani, Mohamed / Karrech, Ali / Yehia, Sherif / Yang, Bo	High strength flowable lightweight concrete incorporating low C3A cement, silica fume, stalite and macro-polyfelin polymer fibres	122410
Mohan, Manu K. / Pillai, Radhakrishna G. / Santhanam, Manu / Gettu, Ravindra	High-performance cementitious grout with fly ash for corrosion protection of post-tensioned concrete structures	122612
Sheikhhosseini Lori, Iman / Toufigh, Mohammad Mohsen / Toufigh, Vahid	Improvement of poorly graded sandy soil by using copper mine tailing dam sediments-based geopolymer and silica fume	122591
Manjur A Elahi, Md / Shearer, Christopher R. / Reza, Abu Naser Rashid / Saha, Ashish Kumer / Khan, Md Nabi Newaz / Hossain, Md Maruf / Sarker, Prabir Kumar	Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): A review	122628
Du, Wei / Liu, Quantao / Lin, Runsheng / Yu, Jianying	Influence of external environment on self-repairing ability of the cement-based materials containing paraffin/toluene-di-isocyanate microcapsules	122584
Liu, Rentai / Zhang, Chunyu / Pei, Yan / Chen, Mengjun / Liu, Haojie / Li, Xiuhao	Influence of flocculation effect on the apparent viscosity of cement slurry and analysis of different influencing factors	122602
Werani, Matthias / Lei, Lei	Influence of side chain length of MPEG – based polycarboxylate superplasticizers on their resistance towards intercalation into clay structures	122621
Jin, Hesong / Liu, Jiaying / Jiang, Zhilu / Zhou, Hao / Liu, Jun	Influence of the rainfall intensity on the chloride ion distribution in concrete with different levels of initial water saturation	122561
Zhang, Mengya / Hao, Peiwen / Li, Yan	Interfacial adhesive property in “asphalt mixture-PMA copolymer-steel plate” system: Experimental and molecular dynamics simulation	122529
Hany, Engy / Fouad, Nabil / Abdel-Wahab, Mona / Sadek, Ehab	Investigating the mechanical and thermal properties of compressed earth bricks made by eco-friendly stabilization materials as partial or full replacement of cement	122535
Zhou, Lujun / Yang, Shanwu	Investigation on crack propagation in band-like rust layers on weathering steel	122564
van Blokland, Joran / Nasir, Vahid / Cool, Julie / Avramidis, Stavros / Adamopoulos, Stergios	Machine learning-based prediction of internal checks in weathered thermally modified timber	122193
Chen, Keyu / Wu, Dazhi / Yi, Ming / Cai, Qimao / Zhang, Zhenying	Mechanical and durability properties of metakaolin blended with slag geopolymer mortars used for pavement repair	122566
Ahmad, Muhammad Riaz / Chen, Bing / Shah, Syed Farasat Ali	Mechanical and microstructural characterization of bio-concrete prepared with optimized alternative green binders	122533
Ferreira Pinto, A. P. / Sena da Fonseca, B. / Vaz Silva, D.	Mechanical characterization of historical rubble stone masonry and its correlation with the masonry quality assessment	122168
Charkhtab Moghaddam, Shahin / Madandoust, Rahmat / Jamshidi, Morteza / Nikbin, Iman M.	Mechanical properties of fly ash-based geopolymer concrete with crumb rubber and steel fiber under ambient and sulfuric acid conditions	122571
Khodaparast, Mahdi / Rajabi, Ali M. / Mohammadi, Mostafa	Mechanical properties of silty clay soil treated with a mixture of lime and zinc oxide nanoparticles	122548
Zhou, Yingwu / Zheng, Shuyue / Huang, Xiaoxu / Xi, Bin / Huang, Zhenyu / Guo, Menghuan	Performance enhancement of green high-ductility engineered cementitious composites by nano-silica incorporation	122618
Huang, Jiandong / Losa, Massimo / Leandri, Pietro / Kumar, Shiva G. / Zhang, Junfei / Sun, Yuantian	Potential anti-vibration pavements with damping layer: Finite element (FE) modeling, validation, and parametrical studies	122550
Alqahtani, Fahad K. / Rashid, Khuram / Zafar, Idrees / Khan, M. Iqbal / Ababtain, Abdulrohman A.	Production of sustainable green mortar by ultrahigh utilization of fly ash: Technical, economic and environmental assessment	122617
Chen, Shen-En / Shanmugam, Navanit Sri / Boyajian, David / Chavan, Vidya Subhash / Weber, Erika / Baarsons, Keith	Prototyping rail track for micro-people movers using additive manufacturing: Failure topology characterization	122623
Park, Solmoi / Moon, Hoon / Kim, Ji-Hyun / Lee, Minhee / Chung, Chul-Woo	Reaction of hydrated cement paste with supercritical carbon dioxide	122615
Nunes, Vitor A. / Borges, Paulo H. R.	Recent advances in the reuse of steel slags and future perspectives as binder and aggregate for alkali-activated materials	122605
Gou, Hongxiang / Zhu, Hongbo / Zhou, Haiyun / Yang, Zhenghong	Reinforcement mechanism of orientally distributed steel fibers on ultra-high-performance concrete	122646
Wang, Lan / Cui, Shichao / Feng, Lei	Research on the influence of ultraviolet aging on the interfacial cracking characteristics of warm mix crumb rubber modified asphalt mortar	122556
Sun, Fasen / Yang, Shuangqiao / Bai, Shibing / Wang, Qi	Reuse of Pan-milled P-XLPE cable powder as additive for asphalt to improve thermal stability and decrease processing viscosity	122593
Wen, Yankai / Guo, Naisheng / Wang, Lin / Jiao, Bozong / Li, Wei	Rheological properties and microscopic mechanism of rock asphalt composite modified asphalts	122543
Zhang, Nan / Hedayat, Ahmadreza / Bolaños Sosa, Héctor Gelber / González Cárdenas, Juan José / Salas Álvarez, Guido Edgard / Ascuña Rivera, Victor Benigno	Specimen size effects on the mechanical behaviors and failure patterns of the mine tailings-based geopolymer under uniaxial compression	122525
Kumar, Amit / Kumar, Virendra / Prasad, Brajkishor	Strength development and flexural behavior of reinforced concrete beam using one-part alkali-activated binder	122619
Meng, Dan / Wu, Xuemin / Quan, Hongzhu / Zhu, Chongji	A strength-based mix design method for recycled aggregate concrete and consequent durability performance	122616
Gao, Yuan / Jing, Hongwen / Fu, Guangping / Zhao, Zhenlong / Shi, Xinshuai	Studies on combined effects of graphene oxide-fly ash hybrid on the workability, mechanical performance and pore structures of cementitious grouting under high W/C ratio	122578
Peng, Lei / Chen, Bing	Study on the basic properties and mechanism of waste sludge solidified by magnesium phosphate cement containing different active magnesium oxide	122609
Segundo, Iran Rocha / Silva, Leonel / Palha, Carlos / Freitas, Elisabete / Silva, Hugo	Surface rehabilitation of Portland cement concrete (PCC) pavements using single or double surface dressings with soft bitumen, conventional or modified emulsions	122611
Sun, Jing / Daliri, Ali / Lu, Guoxing / Liu, Dongying / Xia, Fukun / Gong, Ao	Tensile behaviour of titanium-based carbon-fibre/epoxy laminate	122633
Pae, Junil / Zhang, Yi / Poh, Leong Hien / Moon, Juhyuk	Three-dimensional transport properties of mortar with a high water-to-cement ratio using X-ray computed tomography	122608
Zhang, Kun / Pan, Lisha / Li, Jiacheng / Lin, Chang	What is the mechanism of the fiber effect on the rheological behavior of cement paste with polycarboxylate superplasticizer?	122542

Über diese
Datenseite
IssueID
66194
Veröffentlicht am:
17.06.2022
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - April 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - April 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.