Construction and Building Materials - May 2021

Published:	May 2021

Articles in this Issue

Author(s)	Title	Page(s)
Trochoutsou, Niki / Di Benedetti, Matteo / Pilakoutas, Kypros / Guadagnini, Maurizio	Bond of Flax Textile-Reinforced Mortars to Masonry	122849
Wang, Wentong / Sha, Aimin / Lu, Zhen / Yuan, Dongdong / Jiang, Wei / Liu, Zhuangzhuang	Cement filled with phosphorescent materials for pavement: Afterglow decay mechanism and properties	122798
Li, Yong-hui / Kong, Zhen-yi / Xie, Hua-Rong / Ma, Yan / Mu, Bao-gang / Hokoi, Shuichi	Construction type influences features of rising damp of blue-brick masonry walls	122791
Mirković, Nikola / Brajović, Ljiljana / Popović, Zdenka / Todorović, Goran / Lazarević, Luka / Petrović, Miloš	Determination of temperature stresses in CWR based on measured rail surface temperatures	122713
Dhakal, Milap / Scott, Allan N. / Shah, Vineet / Dhakal, Rajesh P. / Clucas, Don	Development of a MgO-metakaolin binder system	122736
Chen, Ru / Zhao, Ruikang / Liu, Ya / Xi, Zhonghua / Cai, Jun / Zhang, Junsheng / Wang, Qingjun / Xie, Hongfeng	Development of eco-friendly fire-retarded warm-mix epoxy asphalt binders using reactive polymeric flame retardants for road tunnel pavements	122752
Ahmed, Tanvir / Elchalakani, Mohamed / Karrech, Ali / Mohamed Ali, M. S. / Guo, Lanhui	Development of ECO-UHPC with very-low-C3A cement and ground granulated blast-furnace slag	122787
Wang, Gang / Wu, Qing / Zhou, Hao / Peng, Chen / Chen, Wei	Diffusion of chloride ion in coral aggregate seawater concrete under marine environment	122821
Jalali, Javad / Noorzad, Reza	Discrete fiber reinforcement efficiency in the mechanical properties and wet-dry performance of fat clay treated with industrial sewage sludge ash	122739
Xu, Mingfeng / Yu, Jing / Zhou, Jian / Bao, Yi / Li, Victor C.	Effect of curing relative humidity on mechanical properties of engineered cementitious composites at multiple scales	122834
Tayebi, Morteza / Nematzadeh, Mahdi	Effect of hot-compacted waste nylon fine aggregate on compressive stress-strain behavior of steel fiber-reinforced concrete after exposure to fire: Experiments and optimization	122742
Zhang, Qian / Wu, Delei / Zhang, Xujing / Chang, Kailang / Wang, Yongbing	Effect of organic deicing agents on asphalt rheology and analysis of the mechanism	122649
Yermán, Luis / Ottenhaus, Lisa-Mareike / Montoya, Camilo / Morrell, Jeffrey J.	Effect of repeated wetting and drying on withdrawal capacity and corrosion of nails in treated and untreated timber	122878
Malathy, Ramalingam / Arivoli, Masilamani / Chung, Ill-Min / Prabakaran, Mayakrishnan	Effect of surface-treated energy optimized furnace steel slag as coarse aggregate in the performance of concrete under corrosive environment	122840
Argın, G. / Uzal, B.	Enhancement of pozzolanic activity of calcined clays by limestone powder addition	122789
Ho, Van Dac / Gholampour, Aliakbar / Losic, Dusan / Ozbakkaloglu, Togay	Enhancing the performance and environmental impact of alkali-activated binder-based composites containing graphene oxide and industrial by-products	122811
Gajewski, Marcin / Bańkowski, Wojciech / Gajewska, Beata / Sybilski, Dariusz / Horodecka, Renata	Estimation of asphalt binders’ resistance to permanent deformation with application of the MSCR and multiple shear creep long recovery (MSCLR) tests	122808
Xi, Lei / Luo, Rong / Liu, Hanqi	Evaluating the influence of humidity on asphalt mixture performance by the flow number test	122754
Sikora, Pawel / El-Khayatt, Ahmed M. / Saudi, H. A. / Chung, Sang-Yeop / Stephan, Dietmar / Abd Elrahman, Mohamed	Evaluation of the effects of bismuth oxide (Bi2O3) micro and nanoparticles on the mechanical, microstructural and γ-ray/neutron shielding properties of Portland cement pastes	122758
Kang, Chongjie / Wenner, Marc / Marx, Steffen	Experimental investigation on the rail residual stress distribution and its influence on the bending fatigue resistance of rails	122856
Ahmad, Iftikhar / Qing, Longbang / Khan, Sujjaid / Cao, Guorui / Ijaz, Nauman / Mu, Ru	Experimental investigations on fracture parameters of random and aligned steel fiber reinforced cementitious composites	122680
Yoon, Jinyoung / Kim, Hyunjun / Sim, Sung-Han / Pyo, Sukhoon	Framework for characterizing the time-dependent volumetric properties of aerated cementitious material	122781
Arab, Mohamed G. / Omar, Maher / Almajed, Abduallah / Elbaz, Yousef / Ahmed, Amira H.	Hybrid technique to produce bio-bricks using enzyme-induced carbonate precipitation (EICP) and sodium alginate biopolymer	122846
Qi, Chongchong / Ly, Hai-Bang / Minh Le, Lu / Yang, Xingyu / Guo, Li / Thai Pham, Binh	Improved strength prediction of cemented paste backfill using a novel model based on adaptive neuro fuzzy inference system and artificial bee colony	122857
Tian, Yu / Xiang, Peng / Liu, Shifu / Ling, Jianming / Tang, Rui	Improving airport runway rigid pavement design using influence surfaces	122702
Douthe, Cyril / Stefanou, Ioannis	In-situ experiment on long-term behaviour of GFRP pipes under permanent bending	122620
Diógenes, Lara / Maia, Renan / Bessa, Iuri / Castelo Branco, Verônica / Nogueira Neto, José / Silva, Francisco	The influence of crushing processes and mineralogy of aggregates on their shape properties and susceptibility to degradation	122745
Huang, Hao / Pang, Hao / Huang, Jianheng / Yu, Peitao / Li, Jialin / Lu, Mangeng / Liao, Bing	Influence of hard segment content and soft segment length on the microphase structure and mechanical performance of polyurethane-based polymer concrete	122388
Vanhove, Yannick / Djelal, Chafika	Influence of the formwork removal by polarization on the facing aesthetics in reinforced concrete	122841
Kumar, Sanjeev / Yang, En-Hua / Unluer, Cise	Investigation of chloride penetration in carbonated reactive magnesia cement mixes exposed to cyclic wetting–drying	122837
Sui, Shiyu / Wu, Meng / Yang, Zhiqiang / Wang, Fengjuan / Liu, Zhiyong / Jiang, Jinyang	An investigation on the formation of Friedel’s salt in tricalcium silicate combined with metakaolin and limestone systems	122855
Skarżyński, Łukasz / Tejchman, Jacek	Investigations on fracture in reinforced concrete beams in 3-point bending using continuous micro-CT scanning	122796
Jiang, Yingjun / Yi, Yong / Fan, Jiangtao / Tian, Tian / Deng, Changqing	Laboratory investigation on the heat dissipation regularity and road performance of different pavement structure combinations by double-layer paving	122785
Barbieri, Virginia / Lassinantti Gualtieri, Magdalena / Manfredini, Tiziano / Siligardi, Cristina	Lightweight concretes based on wheat husk and hemp hurd as bio-aggregates and modified magnesium oxysulfate binder: Microstructure and technological performances	122751
Murali, G. / Abid, Sallal R. / Karthikeyan, K. / Haridharan, M. K. / Amran, Mugahed / Siva, A.	Low-velocity impact response of novel prepacked expanded clay aggregate fibrous concrete produced with carbon nano tube, glass fiber mesh and steel fiber	122749
Eyo, E. U. / Abbey, S. J.	Machine learning regression and classification algorithms utilised for strength prediction of OPC/by-product materials improved soils	122817
Li, Yuqin / Lattimer, Brian Y. / Case, Scott W.	Measurement and modelling of thermal and physical properties of wood construction materials	122780
Prasad, Vishnu / Sekar, K. / Joseph, M. A.	Mechanical and water absorption properties of nano TiO2 coated flax fibre epoxy composites	122803
Zhang, Gengtong / Xia, Huiyun / Zhang, Wenshuo / Niu, Yanhui / Song, Lifang / Chen, Huaxin / Cao, Dongwei	Mechanical properties, drying shrinkage, microstructure of modified cement mortar based on poly(acrylamide-co-methacrylic acid) microgel	122824
Zhao, Jingnan / Wang, Hao	Mechanistic-empirical analysis of asphalt pavement fatigue cracking under vehicular dynamic loads	122877
Zhao, Zhihui / Chen, Mingxu / Xu, Jiabin / Li, Laibo / Huang, Yongbo / Yang, Lei / Zhao, Piqi / Lu, Lingchao	Mix design and rheological properties of magnesium potassium phosphate cement composites based on the 3D printing extrusion system	122797
Dave, Shemal V. / Bhogayata, Ankur / Arora, Narendra K.	Mix design optimization for fresh, strength and durability properties of ambient cured alkali activated composite by Taguchi method	122822
Zhou, Yang / Xiong, Chenchen / Peng, Zechuan / Huang, Jiale / Chang, Honglei	Molecular dynamics simulation of the interfacial interaction mechanism between functional groups on graphene-based two-dimensional matrix and calcium silicate hydrate	122804
Lu, Hongfang / Behbahani, Saleh / Ma, Xin / Iseley, Tom	A multi-objective optimizer-based model for predicting composite material properties	122746
Kean, Vichet / Chen, Tao / Li, Lingzhen	Numerical study of fatigue life of SMA/CFRP patches retrofitted to central-cracked steel plates	122845
Zhang, Bai / Zhu, Hong / Shah, Kwok Wei / Feng, Pan / Dong, Zhiqiang	Optimization of mix proportion of alkali-activated slag mortars prepared with seawater and coral sand	122805
Wang, Xiao-Yong / Lee, Seokhee / Cho, Hyeongkyu	Penetration properties and injecting conditions of corrosion inhibitor for concrete	122761
Li, Ye / Yang, En-Hua / Zhou, Ao / Liu, Tiejun	Pore pressure build-up and explosive spalling in concrete at elevated temperature: A review	122818
Ruiz-Riancho, Nilo / García, Álvaro / Grossegger, Daniel / Saadoon, Tahseen / Hudson-Griffiths, Robin	Properties of Ca-alginate capsules to maximise asphalt self-healing properties	122728
Niu, Xu-Jing / Li, Qing-bin / Hu, Yu / Tan, Yao-Sheng / Liu, Chun-Feng	Properties of cement-based materials incorporating nano-clay and calcined nano-clay: A review	122820
Kaish, A. B. M. A. / Odimegwu, Temple Chimuanya / Zakaria, Ideris / Abood, Manal Mohsen / Nahar, Lutfun	Properties of concrete incorporating alum sludge in different conditions as partial replacement of fine aggregate	122669
Adnan, Hamsa Mahir / Dawood, Abbas Oda	Recycling of plastic box waste in the concrete mixture as a percentage of fine aggregate	122666
Makoond, Nirvan / Pelà, Luca / Molins, Climent	A Risk Index for the Structural Diagnosis of Masonry Heritage (RISDiMaH)	122433
Lin, Tzu-Hsuan / Putranto, Alan / Wang, Yan-ting	Smart sensor tags for seepage sensing protected by 3D-printed case for embedding in concrete structures	122784
Arulrajah, Arul / Perera, Sahan / Wong, Yat Choy / Maghool, Farshid / Horpibulsuk, Suksun	Stabilization of PET plastic-demolition waste blends using fly ash and slag-based geopolymers in light traffic road bases/subbases	122809
Mollamahmutoğlu, Murat / Avci, Eyübhan	Strength and permeability of boric acid-tempered ultrafine cement grouted sand	122812
Daneshvar, K. / Moradi, M. J. / Ahmadi, K. / Hajiloo, H.	Strengthening of corroded reinforced concrete slabs under multi-impact loading: Experimental results and numerical analysis	122650
Liu, Kaiwen / Qiu, Ruizhe / Su, Qian / Ni, Pengpeng / Liu, Bao / Gao, Jun / Wang, Tengfei	Suffusion response of well graded gravels in roadbed of non-ballasted high speed railway	122848
Kamble, Zunjarrao / Behera, Bijoya Kumar	Sustainable hybrid composites reinforced with textile waste for construction and building applications	122800
del Moral, Beatriz / Baeza, F. Javier / Navarro, Rosa / Galao, Oscar / Zornoza, Emilio / Vera, Jose / Farcas, Catalina / Garcés, Pedro	Temperature and humidity influence on the strain sensing performance of hybrid carbon nanotubes and graphite cement composites	122786
Borinaga-Treviño, R. / Orbe, A. / Canales, J. / Norambuena-Contreras, J.	Thermal and mechanical properties of mortars reinforced with recycled brass fibres	122832
Alhusain, Mustafa / Al-Mayah, Adil	Three dimensional imaging of reinforcement corrosion using micro-computed tomography: Literature review	122813
Chen, Jiaqi / Zhang, Lanchun / Du, Yinfei / Wang, Hao / Dan, Hancheng	Three-dimensional microstructure based model for evaluating the coefficient of thermal expansion and contraction of asphalt concrete	122764

About this
data sheet
IssueID
66190
Published on:
17/06/2022
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - May 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - May 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.