Construction and Building Materials - Mai 2021

Erschienen:	Mai 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Trochoutsou, Niki / Di Benedetti, Matteo / Pilakoutas, Kypros / Guadagnini, Maurizio	Bond of Flax Textile-Reinforced Mortars to Masonry	122849
Wang, Wentong / Sha, Aimin / Lu, Zhen / Yuan, Dongdong / Jiang, Wei / Liu, Zhuangzhuang	Cement filled with phosphorescent materials for pavement: Afterglow decay mechanism and properties	122798
Li, Yong-hui / Kong, Zhen-yi / Xie, Hua-Rong / Ma, Yan / Mu, Bao-gang / Hokoi, Shuichi	Construction type influences features of rising damp of blue-brick masonry walls	122791
Mirković, Nikola / Brajović, Ljiljana / Popović, Zdenka / Todorović, Goran / Lazarević, Luka / Petrović, Miloš	Determination of temperature stresses in CWR based on measured rail surface temperatures	122713
Dhakal, Milap / Scott, Allan N. / Shah, Vineet / Dhakal, Rajesh P. / Clucas, Don	Development of a MgO-metakaolin binder system	122736
Chen, Ru / Zhao, Ruikang / Liu, Ya / Xi, Zhonghua / Cai, Jun / Zhang, Junsheng / Wang, Qingjun / Xie, Hongfeng	Development of eco-friendly fire-retarded warm-mix epoxy asphalt binders using reactive polymeric flame retardants for road tunnel pavements	122752
Ahmed, Tanvir / Elchalakani, Mohamed / Karrech, Ali / Mohamed Ali, M. S. / Guo, Lanhui	Development of ECO-UHPC with very-low-C3A cement and ground granulated blast-furnace slag	122787
Wang, Gang / Wu, Qing / Zhou, Hao / Peng, Chen / Chen, Wei	Diffusion of chloride ion in coral aggregate seawater concrete under marine environment	122821
Jalali, Javad / Noorzad, Reza	Discrete fiber reinforcement efficiency in the mechanical properties and wet-dry performance of fat clay treated with industrial sewage sludge ash	122739
Xu, Mingfeng / Yu, Jing / Zhou, Jian / Bao, Yi / Li, Victor C.	Effect of curing relative humidity on mechanical properties of engineered cementitious composites at multiple scales	122834
Tayebi, Morteza / Nematzadeh, Mahdi	Effect of hot-compacted waste nylon fine aggregate on compressive stress-strain behavior of steel fiber-reinforced concrete after exposure to fire: Experiments and optimization	122742
Zhang, Qian / Wu, Delei / Zhang, Xujing / Chang, Kailang / Wang, Yongbing	Effect of organic deicing agents on asphalt rheology and analysis of the mechanism	122649
Yermán, Luis / Ottenhaus, Lisa-Mareike / Montoya, Camilo / Morrell, Jeffrey J.	Effect of repeated wetting and drying on withdrawal capacity and corrosion of nails in treated and untreated timber	122878
Malathy, Ramalingam / Arivoli, Masilamani / Chung, Ill-Min / Prabakaran, Mayakrishnan	Effect of surface-treated energy optimized furnace steel slag as coarse aggregate in the performance of concrete under corrosive environment	122840
Argın, G. / Uzal, B.	Enhancement of pozzolanic activity of calcined clays by limestone powder addition	122789
Ho, Van Dac / Gholampour, Aliakbar / Losic, Dusan / Ozbakkaloglu, Togay	Enhancing the performance and environmental impact of alkali-activated binder-based composites containing graphene oxide and industrial by-products	122811
Gajewski, Marcin / Bańkowski, Wojciech / Gajewska, Beata / Sybilski, Dariusz / Horodecka, Renata	Estimation of asphalt binders’ resistance to permanent deformation with application of the MSCR and multiple shear creep long recovery (MSCLR) tests	122808
Xi, Lei / Luo, Rong / Liu, Hanqi	Evaluating the influence of humidity on asphalt mixture performance by the flow number test	122754
Sikora, Pawel / El-Khayatt, Ahmed M. / Saudi, H. A. / Chung, Sang-Yeop / Stephan, Dietmar / Abd Elrahman, Mohamed	Evaluation of the effects of bismuth oxide (Bi2O3) micro and nanoparticles on the mechanical, microstructural and γ-ray/neutron shielding properties of Portland cement pastes	122758
Kang, Chongjie / Wenner, Marc / Marx, Steffen	Experimental investigation on the rail residual stress distribution and its influence on the bending fatigue resistance of rails	122856
Ahmad, Iftikhar / Qing, Longbang / Khan, Sujjaid / Cao, Guorui / Ijaz, Nauman / Mu, Ru	Experimental investigations on fracture parameters of random and aligned steel fiber reinforced cementitious composites	122680
Yoon, Jinyoung / Kim, Hyunjun / Sim, Sung-Han / Pyo, Sukhoon	Framework for characterizing the time-dependent volumetric properties of aerated cementitious material	122781
Arab, Mohamed G. / Omar, Maher / Almajed, Abduallah / Elbaz, Yousef / Ahmed, Amira H.	Hybrid technique to produce bio-bricks using enzyme-induced carbonate precipitation (EICP) and sodium alginate biopolymer	122846
Qi, Chongchong / Ly, Hai-Bang / Minh Le, Lu / Yang, Xingyu / Guo, Li / Thai Pham, Binh	Improved strength prediction of cemented paste backfill using a novel model based on adaptive neuro fuzzy inference system and artificial bee colony	122857
Tian, Yu / Xiang, Peng / Liu, Shifu / Ling, Jianming / Tang, Rui	Improving airport runway rigid pavement design using influence surfaces	122702
Douthe, Cyril / Stefanou, Ioannis	In-situ experiment on long-term behaviour of GFRP pipes under permanent bending	122620
Diógenes, Lara / Maia, Renan / Bessa, Iuri / Castelo Branco, Verônica / Nogueira Neto, José / Silva, Francisco	The influence of crushing processes and mineralogy of aggregates on their shape properties and susceptibility to degradation	122745
Huang, Hao / Pang, Hao / Huang, Jianheng / Yu, Peitao / Li, Jialin / Lu, Mangeng / Liao, Bing	Influence of hard segment content and soft segment length on the microphase structure and mechanical performance of polyurethane-based polymer concrete	122388
Vanhove, Yannick / Djelal, Chafika	Influence of the formwork removal by polarization on the facing aesthetics in reinforced concrete	122841
Kumar, Sanjeev / Yang, En-Hua / Unluer, Cise	Investigation of chloride penetration in carbonated reactive magnesia cement mixes exposed to cyclic wetting–drying	122837
Sui, Shiyu / Wu, Meng / Yang, Zhiqiang / Wang, Fengjuan / Liu, Zhiyong / Jiang, Jinyang	An investigation on the formation of Friedel’s salt in tricalcium silicate combined with metakaolin and limestone systems	122855
Skarżyński, Łukasz / Tejchman, Jacek	Investigations on fracture in reinforced concrete beams in 3-point bending using continuous micro-CT scanning	122796
Jiang, Yingjun / Yi, Yong / Fan, Jiangtao / Tian, Tian / Deng, Changqing	Laboratory investigation on the heat dissipation regularity and road performance of different pavement structure combinations by double-layer paving	122785
Barbieri, Virginia / Lassinantti Gualtieri, Magdalena / Manfredini, Tiziano / Siligardi, Cristina	Lightweight concretes based on wheat husk and hemp hurd as bio-aggregates and modified magnesium oxysulfate binder: Microstructure and technological performances	122751
Murali, G. / Abid, Sallal R. / Karthikeyan, K. / Haridharan, M. K. / Amran, Mugahed / Siva, A.	Low-velocity impact response of novel prepacked expanded clay aggregate fibrous concrete produced with carbon nano tube, glass fiber mesh and steel fiber	122749
Eyo, E. U. / Abbey, S. J.	Machine learning regression and classification algorithms utilised for strength prediction of OPC/by-product materials improved soils	122817
Li, Yuqin / Lattimer, Brian Y. / Case, Scott W.	Measurement and modelling of thermal and physical properties of wood construction materials	122780
Prasad, Vishnu / Sekar, K. / Joseph, M. A.	Mechanical and water absorption properties of nano TiO2 coated flax fibre epoxy composites	122803
Zhang, Gengtong / Xia, Huiyun / Zhang, Wenshuo / Niu, Yanhui / Song, Lifang / Chen, Huaxin / Cao, Dongwei	Mechanical properties, drying shrinkage, microstructure of modified cement mortar based on poly(acrylamide-co-methacrylic acid) microgel	122824
Zhao, Jingnan / Wang, Hao	Mechanistic-empirical analysis of asphalt pavement fatigue cracking under vehicular dynamic loads	122877
Zhao, Zhihui / Chen, Mingxu / Xu, Jiabin / Li, Laibo / Huang, Yongbo / Yang, Lei / Zhao, Piqi / Lu, Lingchao	Mix design and rheological properties of magnesium potassium phosphate cement composites based on the 3D printing extrusion system	122797
Dave, Shemal V. / Bhogayata, Ankur / Arora, Narendra K.	Mix design optimization for fresh, strength and durability properties of ambient cured alkali activated composite by Taguchi method	122822
Zhou, Yang / Xiong, Chenchen / Peng, Zechuan / Huang, Jiale / Chang, Honglei	Molecular dynamics simulation of the interfacial interaction mechanism between functional groups on graphene-based two-dimensional matrix and calcium silicate hydrate	122804
Lu, Hongfang / Behbahani, Saleh / Ma, Xin / Iseley, Tom	A multi-objective optimizer-based model for predicting composite material properties	122746
Kean, Vichet / Chen, Tao / Li, Lingzhen	Numerical study of fatigue life of SMA/CFRP patches retrofitted to central-cracked steel plates	122845
Zhang, Bai / Zhu, Hong / Shah, Kwok Wei / Feng, Pan / Dong, Zhiqiang	Optimization of mix proportion of alkali-activated slag mortars prepared with seawater and coral sand	122805
Wang, Xiao-Yong / Lee, Seokhee / Cho, Hyeongkyu	Penetration properties and injecting conditions of corrosion inhibitor for concrete	122761
Li, Ye / Yang, En-Hua / Zhou, Ao / Liu, Tiejun	Pore pressure build-up and explosive spalling in concrete at elevated temperature: A review	122818
Ruiz-Riancho, Nilo / García, Álvaro / Grossegger, Daniel / Saadoon, Tahseen / Hudson-Griffiths, Robin	Properties of Ca-alginate capsules to maximise asphalt self-healing properties	122728
Niu, Xu-Jing / Li, Qing-bin / Hu, Yu / Tan, Yao-Sheng / Liu, Chun-Feng	Properties of cement-based materials incorporating nano-clay and calcined nano-clay: A review	122820
Kaish, A. B. M. A. / Odimegwu, Temple Chimuanya / Zakaria, Ideris / Abood, Manal Mohsen / Nahar, Lutfun	Properties of concrete incorporating alum sludge in different conditions as partial replacement of fine aggregate	122669
Adnan, Hamsa Mahir / Dawood, Abbas Oda	Recycling of plastic box waste in the concrete mixture as a percentage of fine aggregate	122666
Makoond, Nirvan / Pelà, Luca / Molins, Climent	A Risk Index for the Structural Diagnosis of Masonry Heritage (RISDiMaH)	122433
Lin, Tzu-Hsuan / Putranto, Alan / Wang, Yan-ting	Smart sensor tags for seepage sensing protected by 3D-printed case for embedding in concrete structures	122784
Arulrajah, Arul / Perera, Sahan / Wong, Yat Choy / Maghool, Farshid / Horpibulsuk, Suksun	Stabilization of PET plastic-demolition waste blends using fly ash and slag-based geopolymers in light traffic road bases/subbases	122809
Mollamahmutoğlu, Murat / Avci, Eyübhan	Strength and permeability of boric acid-tempered ultrafine cement grouted sand	122812
Daneshvar, K. / Moradi, M. J. / Ahmadi, K. / Hajiloo, H.	Strengthening of corroded reinforced concrete slabs under multi-impact loading: Experimental results and numerical analysis	122650
Liu, Kaiwen / Qiu, Ruizhe / Su, Qian / Ni, Pengpeng / Liu, Bao / Gao, Jun / Wang, Tengfei	Suffusion response of well graded gravels in roadbed of non-ballasted high speed railway	122848
Kamble, Zunjarrao / Behera, Bijoya Kumar	Sustainable hybrid composites reinforced with textile waste for construction and building applications	122800
del Moral, Beatriz / Baeza, F. Javier / Navarro, Rosa / Galao, Oscar / Zornoza, Emilio / Vera, Jose / Farcas, Catalina / Garcés, Pedro	Temperature and humidity influence on the strain sensing performance of hybrid carbon nanotubes and graphite cement composites	122786
Borinaga-Treviño, R. / Orbe, A. / Canales, J. / Norambuena-Contreras, J.	Thermal and mechanical properties of mortars reinforced with recycled brass fibres	122832
Alhusain, Mustafa / Al-Mayah, Adil	Three dimensional imaging of reinforcement corrosion using micro-computed tomography: Literature review	122813
Chen, Jiaqi / Zhang, Lanchun / Du, Yinfei / Wang, Hao / Dan, Hancheng	Three-dimensional microstructure based model for evaluating the coefficient of thermal expansion and contraction of asphalt concrete	122764

Über diese
Datenseite
IssueID
66190
Veröffentlicht am:
17.06.2022
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Mai 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Mai 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.