Construction and Building Materials - May 2021

Published:	May 2021

Articles in this Issue

Author(s)	Title	Page(s)
Alaskar, Abdulaziz / Alabduljabbar, Hisham / Mohamed, Abdeliazim Mustafa / Alrshoudi, Fahed / Alyousef, Rayed	Abrasion and skid resistance of concrete containing waste polypropylene fibers and palm oil fuel ash as pavement material	122681
Pu, Yunhui / Li, Lang / Wang, Qingyuan / Shi, Xiaoshuang / Luan, Chenchen / Zhang, Guomin / Fu, Ling / El-Fatah Abomohra, Abd	Accelerated carbonation technology for enhanced treatment of recycled concrete aggregates: A state-of-the-art review	122671
Gauss, Christian / Kadivar, Marzieh / Pereira, Ricardo G. F. / Savastano Jr., Holmer	Assessment of dendrocalamus asper (Schult and schult f.) (Poaceae) bamboo treated with tannin-boron preservatives	122723
Carmona-Quiroga, P. M. / Blanco-Varela, M. T.	Barium carbonate and supplementary cementitious materials to counteract thaumasite sulfate attack in mortars: Effect of aggregate composition	122583
Tuncer, Erturk / Binici, Baris / Canbay, Erdem	Behavior and design of FRP bonded autoclaved aerated concrete beams	122712
Liang, Chaofeng / Cai, Zhedong / Wu, Huixia / Xiao, Jianzhuang / Zhang, Yuming / Ma, Zhiming	Chloride transport and induced steel corrosion in recycled aggregate concrete: A review	122547
Wang, Chao / Chen, Yifang / Gong, Guanyu	Cohesive and adhesive healing evaluation of asphalt binders by means of the LASH and BBSH tests	122684
Shill, Sukanta Kumer / Al-deen, Safat / Ashraf, Mahmud / Elahi, Manjur A. / Subhani, Mahbube / Hutchison, Wayne	A comparative study on the performance of cementitious composites resilient to airfield conditions	122709
Zeng, Yusheng / Tang, Aiping	Comparison of effects of basalt and polyacrylonitrile fibers on toughness behaviors of lightweight aggregate concrete	122572
Xu, Song / Fan, Yong / Feng, Zhengang / Ke, Yunbin / Zhang, Canlin / Huang, Heyao	Comparison of quantitative determination for SBS content in SBS modified asphalt	122733
Xie, Jing / Wu, Changwei / Gao, Lemei / Xu, Changhang / Xu, Yinsheng / Chen, Guoming	Detection of internal defects in CFRP strengthened steel structures using eddy current pulsed thermography	122642
Tian, Weichen / Qi, Beimeng / Liu, Yushi / Liu, Keqi / Wang, Wei	Early frost resistance and permeability properties of carbon fiber/cement-based composite cured by ohmic heating under ultra-low temperature	122729
Zong, Youjie / Li, Song / Zhang, Jinbao / Zhai, Jiahui / Li, Chuang / Ji, Kuo / Feng, Baozhu / Zhao, Hua / Guan, Bowen / Xiong, Rui	Effect of aggregate type and polishing level on the long-term skid resistance of thin friction course	122730
Mousavi, Seyed Roohollah / Afshoon, Iman / Bayatpour, Mohammad Ali / Davarpanah T. Q., Amirhossein / Miri, Mahmoud	Effect of waste glass and curing aging on fracture toughness of self-compacting mortars using ENDB specimen	122711
Luo, Xiaohua / Wang, Feng / Bhandari, Sushmita / Wang, Ningning / Qiu, Xin	Effectiveness evaluation and influencing factor analysis of pavement seal coat treatments using random forests	122688
Li, Sheng / Guo, Shuaicheng / Yao, Yiming / Jin, Zuquan / Shi, Caijun / Zhu, Deju	The effects of aging in seawater and SWSSC and strain rate on the tensile performance of GFRP/BFRP composites: A critical review	122534
Zhang, Yamei / Yu, Yanglun / Lu, Yun / Yu, Wenji / Wang, Siqun	Effects of heat treatment on surface physicochemical properties and sorption behavior of bamboo (Phyllostachys edulis)	122683
Yang, Haibin / Monasterio, Manuel / Zheng, Dapeng / Cui, Hongzhi / Tang, Waiching / Bao, Xiaohua / Chen, Xiangsheng	Effects of nano silica on the properties of cement-based materials: A comprehensive review	122715
Liu, Xia / Hou, Pengkun / Chen, Heng	Effects of nanosilica on the hydration and hardening properties of slag cement	122705
Arpajirakul, Soyson / Pungrasmi, Wiboonluk / Likitlersuang, Suched	Efficiency of microbially-induced calcite precipitation in natural clays for ground improvement	122722
Ramu, Yogesh Kumar / Sirivivatnanon, Vute / Thomas, Paul / Dhandapani, Yuvaraj / Vessalas, Kirk	Evaluating the impact of curing temperature in delayed ettringite formation using electrochemical impedance spectroscopy	122726
Rehman, A. / Masood, A. / Akhtar, S. / Ibrahim, S. M. / Shariq, M.	Experimental and numerical investigation into flexural bond strength of RC beams exposed to elevated temperature	122630
Tran, Manh Tien / Vu, Xuan Hong / Ferrier, Emmanuel	Experimental and numerical investigation of carbon textile/cementitious matrix interfacebehaviourfrom pull-out tests	122634
Xin, Ren / Ma, Pengfei	Experimental investigation on the in-plane seismic performance of damaged masonry walls repaired with grout-injected ferrocement overlay	122565
Zhang, Bai / Zhu, Hong / Cao, Ruiming / Ding, Jianming / Chen, Xianhua	Feasibility of using geopolymers to investigate the bond behavior of FRP bars in seawater sea-sand concrete	122636
Zheng, Xuan / Zhang, Jun	Finite element simulation for bending behavior of steel-ECC composite slab considering shrinkage, creep and cracking	122643
Lai, Wallace W. L. / Chang, Ray K. W. / Völker, Christoph / Cheung, Bella W. Y.	GPR wave dispersion for material characterization	122597
Zou, Chao / Long, Guangcheng / Zeng, Xiaohui / Ma, Kunlin / Xie, Youjun	Hydration and multiscale pore structure characterization of steam-cured cement paste investigated by X-ray CT	122629
Pan, Zhufeng / Yang, Jian / Wang, Xing-er / Wang, Feiliang / Azim, Iftikhar / Wang, Chenyu	Image-based surface scratch detection on architectural glass panels using deep learning approach	122717
Yaowarat, Teerasak / Suddeepong, Apichat / Hoy, Menglim / Horpibulsuk, Suksun / Takaikaew, Thaworn / Vichitcholchai, Nopparat / Arulrajah, Arul / Chinkulkijniwat, Avirut	Improvement of flexural strength of concrete pavements using natural rubber latex	122704
Haefliger, Severin / Kaufmann, Walter	Influence of cross section loss on the stress-strain characteristics of corroded quenched and self-tempered reinforcing bars	122598
Wang, Lei / He, Tingshu / Zhou, Yongxiang / Tang, Shengwen / Tan, Jianjun / Liu, Zhentao / Su, Jianwen	The influence of fiber type and length on the cracking resistance, durability and pore structure of face slab concrete	122706
Yao, Xingliang / Liao, Hongqiang / Dong, Hua / Yang, Fengling / Yao, Yonggang / Wang, Wenlong	Influence of water repellent on the property of solid waste based sulfoaluminate cement paste and its application in lightweight porous concrete	122731
Wang, Menghao / Wang, Chaohui / Yu, Jianxing / Li, Yanwei / Wen, Penghui / Fan, Qiaojuan	Investigation of the grouting effect of blast furnace slag-based mortar on void road bases based on the grouting simulation test	122567
Luo, Zhiyu / Li, Wengui / Li, Peiran / Wang, Kejin / Shah, Surendra P.	Investigation on effect of nanosilica dispersion on the properties and microstructures of fly ash-based geopolymer composite	122690
Lv, Songtao / Guo, Yanpeng / Xia, Chengdong / Liu, Chaochao / Hu, Long / Guo, Shuaicheng / Wang, XiaoFeng / Borges Cabrera, Milkos / Li, Mi	Investigation on high-temperature resistance to permanent deformation of waste leather modified asphalt	122541
Lekshmi, M. S. / Vishnudas, Subha / Anil, K. R.	Lignocellulosic materials as reinforcement and replacement for binders in masonry mortar	122607
Hangxing, Ding / Shiyu, Zhang / Xiaolong, Zhang / Zhaohao, Zhang / Yingliang, Zhao	Low carbon cementitious composites: Calcined quarry dust modified lime/sodium sulfate-activated slag	122521
Pei, Zhongshi / Yi, Junyan / Li, Yunlu / Cheng, Pengjian / Zhu, Yiming / Feng, Decheng	Material design and performance analysis of the anti-ice and antiskid wear layer on pavement	122734
Ying, Guo-gang / Song, Chao / Ren, Jie / Guo, Si-Yao / Nie, Rui / Zhang, Lihai	Mechanical and durability-related performance of graphene/epoxy resin and epoxy resin enhanced OPC mortar	122644
Tian, Yaogang / Jiang, Jing / Wang, Shuaifei / Yang, Tingting / Qi, Lin / Geng, Jiuguang	The mechanical and interfacial properties of concrete prepared by recycled aggregates with chloride corrosion media	122653
Zeng, Ling / Yu, Hui-Cong / Liu, Jie / Gao, Qian-Feng / Bian, Han-bing	Mechanical behaviour of disintegrated carbonaceous mudstone under stress and cyclic drying/wetting	122656
Kuqo, Aldi / Mai, Carsten	Mechanical properties of lightweight gypsum composites comprised of seagrass Posidonia oceanica and pine (Pinus sylvestris) wood fibers	122714
Wang, Yuli / Luo, Shuqiong / Yang, Lei / Ding, Yahong	Microwave curing cement-fly ash blended paste	122685
Gong, Mingyang / Sun, Yiren / Chen, Jingyun	Multi-scale analysis of asphalt pavement on curved concrete bridge deck considering effect of mesoscopic structure characteristics	122724
Tatar, Jovan	Nanomechanical properties of cement Paste-Epoxy interphase following hygrothermal conditioning by water immersion	122695
Koroglu, Levent / Over Kaman, Derya / Ayas, Erhan	Optimizing the particle size distribution of heat-treated boron derivative wastes in cement mortars as portland cement replacements	122640
Kim, Yail J. / Solanki, Manish	Post-Peak crack control of concrete with BFRP grids	122716
Feng, Zhengang / Zhao, Peixin / Li, Xinjun / Zhu, Like	Preparation and properties of bitumen modified with waste rubber pyrolytic carbon black	122697
Cui, Peng / Wu, Chun-Ran / Chen, Jie / Luo, Fu-ming / Kou, Shi-Cong	Preparation of magnesium oxysulfate cement as a 3D printing material	122677
Long, Wu-Jian / Lin, Can / Tao, Jie-Lin / Ye, Tao-Hua / Fang, Yuan	Printability and particle packing of 3D-printable limestone calcined clay cement composites	122647
Yang, Qiao / Li, Chen / Ren, Qiang / Jiang, Zhengwu	Properties and microstructure of CO2 activated binder produced by recycling phosphorous slag	122698
Sun, Jinfeng / Dong, Haina / Wu, Jiajun / Jiang, Jingjing / Li, Weifeng / Shen, Xiaodong / Hou, Guihua	Properties evolution of cement-metakaolin system with C-S-H/PCE nanocomposites	122707
Astoveza, Jennifer / Trauchessec, Romain / Soth, Ratana / Pontikes, Yiannis	Properties of calcium aluminate blended cement incorporating iron-rich slag: Evolution over a curing period of 1 year	122569
Li, Xing / Zhang, Jiwen / Liu, Bei / Jiang, Hailou	Pull-out behavior of non-prestressed steel strands in novel beam-to-column connection	122538
Xu, Pei / Gao, Jiangping / Pei, Jianzhong / Chen, Zhen / Zhang, Jiupeng / Li, Rui	Research on highly dissolved rubber asphalt prepared using a composite waste engine oil addition and microwave desulfurization method	122641
Ma, Cong / Chen, Gege / Jiang, Zhengwu / Zhou, Haijun / Yao, Hao / Zhou, Rui / Ren, Weixin	Rheological properties of magnesium phosphate cement with different M/P ratios	122657
Guo, Yunlong / Jia, Wenli / Markine, Valéri / Jing, Guoqing	Rheology study of ballast-sleeper interaction with particle image Velocimetry (PIV) and discrete element modelling (DEM)	122710
Yu, Yuguo / Zhang, Tianyu / Wang, Qihan / Chen, Xiaojun / Wu, Di / Gao, Wei / Liu, Airong	Sensitivity of solidification hydration model in estimating carbonation of fly ash cement system	122582
Hao, Yunhong / Li, Yangrui	Study on preparation and properties of modified magnesium oxychloride cement foam concrete	122708
Veríssimo Passos, Augusto / Farias, Francisco Werley Cipriano / Moraes e Oliveira, Victor Hugo Pereira / Gonçalves Rios, Mara Cardoso / Payão Filho, João da Cruz	Sulfide stress cracking susceptibility of the heat-affected zone of an 9% Ni steel welded joint	122573
Ching, Chai Yee / Bashir, Mohammed J. K. / Aun, Ng Choon / Aldahdooh, M. A. A.	Sustainable production of concrete with treated alum sludge	122703
Wang, Han / Hou, Pengkun / Li, Qinfei / Adu-Amankwah, Samuel / Chen, Heng / Xie, Ning / Zhao, Piqi / Huang, Yongbo / Wang, Shoude / Cheng, Xin	Synergistic effects of supplementary cementitious materials in limestone and calcined clay-replaced slag cement	122648
Dassekpo, Jean-Baptiste Mawulé / Feng, Weipeng / Li, Yanru / Miao, Lixin / Dong, Zhijun / Ye, Jianqiao	Synthesis and characterization of alkali-activated loess and its application as protective coating	122631
Dalalbashi, Ali / Ghiassi, Bahman / Oliveira, Daniel V.	Textile-to-mortar bond behavior: An analytical study	122639
Xu, Shilang / Wang, Wenrui / Dong, Shilin / Li, Qinghua / Liu, Xin / Peng, Yu	Thermal stability study of fiber-reinforced cementitious composites with high ductility under high-temperature casting	122700
Du, Yinfei / Wang, Jiacheng / Deng, Haibin / Liu, Yingchen / Tian, Jun / Wu, Xiaowei	Using steel fibers to accelerate the heat conduction in asphalt mixture and its performance evaluation	122637
Kabay, Nihat / Miyan, Nausad / Ozkan, Hakan	Utilization of pumice powder and glass microspheres in cement mortar using paste replacement methodology	122691
Wei, Zuoan / Zhao, Junkang / Wang, Wensong / Yang, Yonghao / Zhuang, Sunning / Lu, Ting / Hou, Zhenkun	Utilizing gold mine tailings to produce sintered bricks	122655

About this
data sheet
IssueID
66189
Published on:
17/06/2022
Last updated on:
20/06/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - May 2021

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - May 2021

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.