Construction and Building Materials - mai 2021

Publié:	mai 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Alaskar, Abdulaziz / Alabduljabbar, Hisham / Mohamed, Abdeliazim Mustafa / Alrshoudi, Fahed / Alyousef, Rayed	Abrasion and skid resistance of concrete containing waste polypropylene fibers and palm oil fuel ash as pavement material	122681
Pu, Yunhui / Li, Lang / Wang, Qingyuan / Shi, Xiaoshuang / Luan, Chenchen / Zhang, Guomin / Fu, Ling / El-Fatah Abomohra, Abd	Accelerated carbonation technology for enhanced treatment of recycled concrete aggregates: A state-of-the-art review	122671
Gauss, Christian / Kadivar, Marzieh / Pereira, Ricardo G. F. / Savastano Jr., Holmer	Assessment of dendrocalamus asper (Schult and schult f.) (Poaceae) bamboo treated with tannin-boron preservatives	122723
Carmona-Quiroga, P. M. / Blanco-Varela, M. T.	Barium carbonate and supplementary cementitious materials to counteract thaumasite sulfate attack in mortars: Effect of aggregate composition	122583
Tuncer, Erturk / Binici, Baris / Canbay, Erdem	Behavior and design of FRP bonded autoclaved aerated concrete beams	122712
Liang, Chaofeng / Cai, Zhedong / Wu, Huixia / Xiao, Jianzhuang / Zhang, Yuming / Ma, Zhiming	Chloride transport and induced steel corrosion in recycled aggregate concrete: A review	122547
Wang, Chao / Chen, Yifang / Gong, Guanyu	Cohesive and adhesive healing evaluation of asphalt binders by means of the LASH and BBSH tests	122684
Shill, Sukanta Kumer / Al-deen, Safat / Ashraf, Mahmud / Elahi, Manjur A. / Subhani, Mahbube / Hutchison, Wayne	A comparative study on the performance of cementitious composites resilient to airfield conditions	122709
Zeng, Yusheng / Tang, Aiping	Comparison of effects of basalt and polyacrylonitrile fibers on toughness behaviors of lightweight aggregate concrete	122572
Xu, Song / Fan, Yong / Feng, Zhengang / Ke, Yunbin / Zhang, Canlin / Huang, Heyao	Comparison of quantitative determination for SBS content in SBS modified asphalt	122733
Xie, Jing / Wu, Changwei / Gao, Lemei / Xu, Changhang / Xu, Yinsheng / Chen, Guoming	Detection of internal defects in CFRP strengthened steel structures using eddy current pulsed thermography	122642
Tian, Weichen / Qi, Beimeng / Liu, Yushi / Liu, Keqi / Wang, Wei	Early frost resistance and permeability properties of carbon fiber/cement-based composite cured by ohmic heating under ultra-low temperature	122729
Zong, Youjie / Li, Song / Zhang, Jinbao / Zhai, Jiahui / Li, Chuang / Ji, Kuo / Feng, Baozhu / Zhao, Hua / Guan, Bowen / Xiong, Rui	Effect of aggregate type and polishing level on the long-term skid resistance of thin friction course	122730
Mousavi, Seyed Roohollah / Afshoon, Iman / Bayatpour, Mohammad Ali / Davarpanah T. Q., Amirhossein / Miri, Mahmoud	Effect of waste glass and curing aging on fracture toughness of self-compacting mortars using ENDB specimen	122711
Luo, Xiaohua / Wang, Feng / Bhandari, Sushmita / Wang, Ningning / Qiu, Xin	Effectiveness evaluation and influencing factor analysis of pavement seal coat treatments using random forests	122688
Li, Sheng / Guo, Shuaicheng / Yao, Yiming / Jin, Zuquan / Shi, Caijun / Zhu, Deju	The effects of aging in seawater and SWSSC and strain rate on the tensile performance of GFRP/BFRP composites: A critical review	122534
Zhang, Yamei / Yu, Yanglun / Lu, Yun / Yu, Wenji / Wang, Siqun	Effects of heat treatment on surface physicochemical properties and sorption behavior of bamboo (Phyllostachys edulis)	122683
Yang, Haibin / Monasterio, Manuel / Zheng, Dapeng / Cui, Hongzhi / Tang, Waiching / Bao, Xiaohua / Chen, Xiangsheng	Effects of nano silica on the properties of cement-based materials: A comprehensive review	122715
Liu, Xia / Hou, Pengkun / Chen, Heng	Effects of nanosilica on the hydration and hardening properties of slag cement	122705
Arpajirakul, Soyson / Pungrasmi, Wiboonluk / Likitlersuang, Suched	Efficiency of microbially-induced calcite precipitation in natural clays for ground improvement	122722
Ramu, Yogesh Kumar / Sirivivatnanon, Vute / Thomas, Paul / Dhandapani, Yuvaraj / Vessalas, Kirk	Evaluating the impact of curing temperature in delayed ettringite formation using electrochemical impedance spectroscopy	122726
Rehman, A. / Masood, A. / Akhtar, S. / Ibrahim, S. M. / Shariq, M.	Experimental and numerical investigation into flexural bond strength of RC beams exposed to elevated temperature	122630
Tran, Manh Tien / Vu, Xuan Hong / Ferrier, Emmanuel	Experimental and numerical investigation of carbon textile/cementitious matrix interfacebehaviourfrom pull-out tests	122634
Xin, Ren / Ma, Pengfei	Experimental investigation on the in-plane seismic performance of damaged masonry walls repaired with grout-injected ferrocement overlay	122565
Zhang, Bai / Zhu, Hong / Cao, Ruiming / Ding, Jianming / Chen, Xianhua	Feasibility of using geopolymers to investigate the bond behavior of FRP bars in seawater sea-sand concrete	122636
Zheng, Xuan / Zhang, Jun	Finite element simulation for bending behavior of steel-ECC composite slab considering shrinkage, creep and cracking	122643
Lai, Wallace W. L. / Chang, Ray K. W. / Völker, Christoph / Cheung, Bella W. Y.	GPR wave dispersion for material characterization	122597
Zou, Chao / Long, Guangcheng / Zeng, Xiaohui / Ma, Kunlin / Xie, Youjun	Hydration and multiscale pore structure characterization of steam-cured cement paste investigated by X-ray CT	122629
Pan, Zhufeng / Yang, Jian / Wang, Xing-er / Wang, Feiliang / Azim, Iftikhar / Wang, Chenyu	Image-based surface scratch detection on architectural glass panels using deep learning approach	122717
Yaowarat, Teerasak / Suddeepong, Apichat / Hoy, Menglim / Horpibulsuk, Suksun / Takaikaew, Thaworn / Vichitcholchai, Nopparat / Arulrajah, Arul / Chinkulkijniwat, Avirut	Improvement of flexural strength of concrete pavements using natural rubber latex	122704
Haefliger, Severin / Kaufmann, Walter	Influence of cross section loss on the stress-strain characteristics of corroded quenched and self-tempered reinforcing bars	122598
Wang, Lei / He, Tingshu / Zhou, Yongxiang / Tang, Shengwen / Tan, Jianjun / Liu, Zhentao / Su, Jianwen	The influence of fiber type and length on the cracking resistance, durability and pore structure of face slab concrete	122706
Yao, Xingliang / Liao, Hongqiang / Dong, Hua / Yang, Fengling / Yao, Yonggang / Wang, Wenlong	Influence of water repellent on the property of solid waste based sulfoaluminate cement paste and its application in lightweight porous concrete	122731
Wang, Menghao / Wang, Chaohui / Yu, Jianxing / Li, Yanwei / Wen, Penghui / Fan, Qiaojuan	Investigation of the grouting effect of blast furnace slag-based mortar on void road bases based on the grouting simulation test	122567
Luo, Zhiyu / Li, Wengui / Li, Peiran / Wang, Kejin / Shah, Surendra P.	Investigation on effect of nanosilica dispersion on the properties and microstructures of fly ash-based geopolymer composite	122690
Lv, Songtao / Guo, Yanpeng / Xia, Chengdong / Liu, Chaochao / Hu, Long / Guo, Shuaicheng / Wang, XiaoFeng / Borges Cabrera, Milkos / Li, Mi	Investigation on high-temperature resistance to permanent deformation of waste leather modified asphalt	122541
Lekshmi, M. S. / Vishnudas, Subha / Anil, K. R.	Lignocellulosic materials as reinforcement and replacement for binders in masonry mortar	122607
Hangxing, Ding / Shiyu, Zhang / Xiaolong, Zhang / Zhaohao, Zhang / Yingliang, Zhao	Low carbon cementitious composites: Calcined quarry dust modified lime/sodium sulfate-activated slag	122521
Pei, Zhongshi / Yi, Junyan / Li, Yunlu / Cheng, Pengjian / Zhu, Yiming / Feng, Decheng	Material design and performance analysis of the anti-ice and antiskid wear layer on pavement	122734
Ying, Guo-gang / Song, Chao / Ren, Jie / Guo, Si-Yao / Nie, Rui / Zhang, Lihai	Mechanical and durability-related performance of graphene/epoxy resin and epoxy resin enhanced OPC mortar	122644
Tian, Yaogang / Jiang, Jing / Wang, Shuaifei / Yang, Tingting / Qi, Lin / Geng, Jiuguang	The mechanical and interfacial properties of concrete prepared by recycled aggregates with chloride corrosion media	122653
Zeng, Ling / Yu, Hui-Cong / Liu, Jie / Gao, Qian-Feng / Bian, Han-bing	Mechanical behaviour of disintegrated carbonaceous mudstone under stress and cyclic drying/wetting	122656
Kuqo, Aldi / Mai, Carsten	Mechanical properties of lightweight gypsum composites comprised of seagrass Posidonia oceanica and pine (Pinus sylvestris) wood fibers	122714
Wang, Yuli / Luo, Shuqiong / Yang, Lei / Ding, Yahong	Microwave curing cement-fly ash blended paste	122685
Gong, Mingyang / Sun, Yiren / Chen, Jingyun	Multi-scale analysis of asphalt pavement on curved concrete bridge deck considering effect of mesoscopic structure characteristics	122724
Tatar, Jovan	Nanomechanical properties of cement Paste-Epoxy interphase following hygrothermal conditioning by water immersion	122695
Koroglu, Levent / Over Kaman, Derya / Ayas, Erhan	Optimizing the particle size distribution of heat-treated boron derivative wastes in cement mortars as portland cement replacements	122640
Kim, Yail J. / Solanki, Manish	Post-Peak crack control of concrete with BFRP grids	122716
Feng, Zhengang / Zhao, Peixin / Li, Xinjun / Zhu, Like	Preparation and properties of bitumen modified with waste rubber pyrolytic carbon black	122697
Cui, Peng / Wu, Chun-Ran / Chen, Jie / Luo, Fu-ming / Kou, Shi-Cong	Preparation of magnesium oxysulfate cement as a 3D printing material	122677
Long, Wu-Jian / Lin, Can / Tao, Jie-Lin / Ye, Tao-Hua / Fang, Yuan	Printability and particle packing of 3D-printable limestone calcined clay cement composites	122647
Yang, Qiao / Li, Chen / Ren, Qiang / Jiang, Zhengwu	Properties and microstructure of CO2 activated binder produced by recycling phosphorous slag	122698
Sun, Jinfeng / Dong, Haina / Wu, Jiajun / Jiang, Jingjing / Li, Weifeng / Shen, Xiaodong / Hou, Guihua	Properties evolution of cement-metakaolin system with C-S-H/PCE nanocomposites	122707
Astoveza, Jennifer / Trauchessec, Romain / Soth, Ratana / Pontikes, Yiannis	Properties of calcium aluminate blended cement incorporating iron-rich slag: Evolution over a curing period of 1 year	122569
Li, Xing / Zhang, Jiwen / Liu, Bei / Jiang, Hailou	Pull-out behavior of non-prestressed steel strands in novel beam-to-column connection	122538
Xu, Pei / Gao, Jiangping / Pei, Jianzhong / Chen, Zhen / Zhang, Jiupeng / Li, Rui	Research on highly dissolved rubber asphalt prepared using a composite waste engine oil addition and microwave desulfurization method	122641
Ma, Cong / Chen, Gege / Jiang, Zhengwu / Zhou, Haijun / Yao, Hao / Zhou, Rui / Ren, Weixin	Rheological properties of magnesium phosphate cement with different M/P ratios	122657
Guo, Yunlong / Jia, Wenli / Markine, Valéri / Jing, Guoqing	Rheology study of ballast-sleeper interaction with particle image Velocimetry (PIV) and discrete element modelling (DEM)	122710
Yu, Yuguo / Zhang, Tianyu / Wang, Qihan / Chen, Xiaojun / Wu, Di / Gao, Wei / Liu, Airong	Sensitivity of solidification hydration model in estimating carbonation of fly ash cement system	122582
Hao, Yunhong / Li, Yangrui	Study on preparation and properties of modified magnesium oxychloride cement foam concrete	122708
Veríssimo Passos, Augusto / Farias, Francisco Werley Cipriano / Moraes e Oliveira, Victor Hugo Pereira / Gonçalves Rios, Mara Cardoso / Payão Filho, João da Cruz	Sulfide stress cracking susceptibility of the heat-affected zone of an 9% Ni steel welded joint	122573
Ching, Chai Yee / Bashir, Mohammed J. K. / Aun, Ng Choon / Aldahdooh, M. A. A.	Sustainable production of concrete with treated alum sludge	122703
Wang, Han / Hou, Pengkun / Li, Qinfei / Adu-Amankwah, Samuel / Chen, Heng / Xie, Ning / Zhao, Piqi / Huang, Yongbo / Wang, Shoude / Cheng, Xin	Synergistic effects of supplementary cementitious materials in limestone and calcined clay-replaced slag cement	122648
Dassekpo, Jean-Baptiste Mawulé / Feng, Weipeng / Li, Yanru / Miao, Lixin / Dong, Zhijun / Ye, Jianqiao	Synthesis and characterization of alkali-activated loess and its application as protective coating	122631
Dalalbashi, Ali / Ghiassi, Bahman / Oliveira, Daniel V.	Textile-to-mortar bond behavior: An analytical study	122639
Xu, Shilang / Wang, Wenrui / Dong, Shilin / Li, Qinghua / Liu, Xin / Peng, Yu	Thermal stability study of fiber-reinforced cementitious composites with high ductility under high-temperature casting	122700
Du, Yinfei / Wang, Jiacheng / Deng, Haibin / Liu, Yingchen / Tian, Jun / Wu, Xiaowei	Using steel fibers to accelerate the heat conduction in asphalt mixture and its performance evaluation	122637
Kabay, Nihat / Miyan, Nausad / Ozkan, Hakan	Utilization of pumice powder and glass microspheres in cement mortar using paste replacement methodology	122691
Wei, Zuoan / Zhao, Junkang / Wang, Wensong / Yang, Yonghao / Zhuang, Sunning / Lu, Ting / Hou, Zhenkun	Utilizing gold mine tailings to produce sintered bricks	122655

Informations
sur cette fiche
IssueID
66189
Publié(e) le:
17.06.2022
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mai 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mai 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.