Construction and Building Materials - March 2022

Published:	March 2022

Articles in this Issue

Author(s)	Title	Page(s)
Gan, Manguang / Zhang, Liwei / Wang, Yan / Mei, Kaiyuan / Fu, Xiaojuan / Cheng, Xiaowei / Bai, Mingxing / Liu, Hejuan / Li, Xiaochun	3D micro-structural changes of an artificial flow channel in wellbore cement under geologic CO2 storage conditions: Combined effect of effective stress and flow	126761
Li, Qiang / Zeng, Xianhui / Wang, Jiaqing / Luo, Sang / Meng, Yuanpeng / Gao, Lei / Wang, Xiaowei	Aging performance of high viscosity modified asphalt under complex heat-light-water coupled conditions	126314
Curci, Henrique C. F. / de Andrade, Renan P. / Maranhão, Flavio L. / Gomes, Henrique C. / Campello, Eduardo M. B.	Analysis of adhered tiling systems based on experimental evaluation and numerical modeling	126746
Liu, Zhen / Gu, Xingyu / Ren, Hua / Zhou, Zhou / Wang, Xiang / Tang, Shi	Analysis of the dynamic responses of asphalt pavement based on full-scale accelerated testing and finite element simulation	126429
Song, Weiran / Zhao, Shangyong / Zhang, Yiming / Ruan, Cheng / Huang, Ao / Hu, Xiao / Zhao, Min / Zhou, Wen / Wang, Ji / Wang, Xuebao / Wang, Hui / Hou, Zongyu / Wang, Zhe	Application of laser-induced breakdown spectroscopy and chemometrics for rapid identification of fire-retardant/resistant coatings from fire residues	126773
Goodwin, Jodie / Woods, Joshua E. / Hoult, Neil A.	Assessing the structural behaviour of glued-laminated timber beams using distributed strain sensing	126844
Bakhbergen, Umut / Shon, Chang-Seon / Zhang, Dichuan / Kryzhanovskiy, Kirill / Kim, Jong R.	Assessment of Reactive powder concrete subjected to three different sodium sulfate Concentrations: Compressive Strength, Absorption, Porosity, Microstructure, and durability	126804
Turco, Chiara / de Paula Junior, Adilson / Teixeira, Elisabete / Mateus, Ricardo	Authors closure to the Discussion of the Review article “Optimisation of Compressed earth blocks (CEBs) using natural origin materials: A systematic literature review”	126888
Xu, Yang / Han, Hongyang / Ning, Na / Qie, Luchao / Ling, Xing / Li, Yi	Ballast loading plate design and mechanical behavior of under ballast mats	126486
Palese, Michael / Zarembski, Allan M. / Huang, Hai / Palese, Joseph	Ballast particle dynamic response as a function of subgrade support using statistical methods	126772
Chen, Zongping / Jia, Hengrui / Li, Shengxin	Bond behavior of recycled aggregate concrete-filled steel tube after elevated temperatures	126683
Rakhimova, Nailia	Calcium and/or magnesium carbonate and carbonate-bearing rocks in the development of alkali-activated cements – A review	126742
Liu, Xin / Feng, Pan / Cai, Yuxi / Yu, Xiaohan / Liu, Qi	Carbonation behaviors of calcium silicate hydrate (C-S-H): Effects of aluminum	126825
Xie, Hongzhang / Ren, Changzai / Zhao, Baofeng / Liu, Suxiang / Zhu, Di / Guan, Haibin / Xu, Dan / Wang, Jingwei / Yang, Huajian	Characterization and use of biomass power plant ash in sulfoaluminate cementitious materials	126667
Ávila, Fernando / Puertas, Esther / Gallego, Rafael	Characterization of the mechanical and physical properties of stabilized rammed earth: A review	126693
Marras, Graziella / Carcangiu, Gianfranco / Meloni, Paola / Careddu, Nicola	Circular economy in marble industry: From stone scraps to sustainable water-based paints	126768
Lu, Dechun / Su, Cancan / Zhou, Xin / Wang, Guosheng / Du, Xiuli	A cohesion-friction combined hardening plastic model of concrete with the nonorthogonal flow rule: Theory and numerical implementation	126586
Cui, Qi / Maierdan, Yierfan / Chen, Bing / Ge, Junjian / Liu, Ning	Comparative research on the application of slag as an alternative to cement in binder-bentonite cutoff wall backfills	126817
Aldagari, Sand / Kabir, Sk Faisal / Fini, Elham H.	A comparative study on efficacy of waste plastic and waste Rubber in bitumen	126724
Liu, Hengrui / Tian, Zhenghong / Sun, Xiao / Ma, Yuanshan / Fan, Haoyue / Dong, Yun	A conceptual model focusing on internal flocculation structures and water film thickness for analyzing fresh properties of cement paste containing attapulgite	126836
Wang, Danqian / Wang, Ye / Wang, Jinxing / Ma, Kai / Dai, Chaoneng / Wang, Jingfeng / Pan, Fusheng	Corrosion resistance of Mg-Al-Zn magnesium alloy concrete formwork in Portland cement paste	126745
Jin, Xiaodong / Cui, Suping / Zhang, Yao / Zhao, Xinxin / Lv, Feng / Sun, Shibing / Tian, Yingliang / Zhao, Zhiyong / Liu, Donghua	Covalent bonding of the extruded polystyrene foams to mortar through ultraviolet-ozone irradiation	126801
Li, Zhonghao / Zhang, Xiaomeng / Song, Shasha / Xu, Kang / Lyu, Jianxiong / Li, Xianjun	Curing characteristics of low molecular weight melamine-urea–formaldehyde (MUF) resin-impregnated poplar wood	126814
Stahlbuhk, Amelie / Steiger, Michael	Damage potential and supersaturation of KNO3 and relevance in the field of salt damage to porous building material	126516
Dang, L. Minh / Wang, Hanxiang / Li, Yanfen / Nguyen, Tan N. / Moon, Hyeonjoon	DefectTR: End-to-end defect detection for sewage networks using a transformer	126584
Naciri, Khalil / Aalil, Issam / Chaaba, Ali	Eco-friendly gypsum-lime mortar with the incorporation of recycled waste brick	126770
Zhao, Gaowen / Guo, Mengzhen / Wang, Zhuo / Hu, Yiqi / Li, Shaomin / Wei, Feng	Effect of Ca2+ on the sulfate multiple combined induced degradation of early aged mortar	126769
Wang, Tiantian / Wang, Yanxin / Song, Tong / Dong, Quanxiao / Li, Qian / Wang, Shiwei	Effect of crystalline control on the water retention and degradation of Poly(lactic acid) composite in concrete curing	126834
de Azevedo Basto, Priscilla / Estolano de Lima, Victor / de Melo Neto, Antonio A.	Effect of curing temperature in the relative decrease peak intensity of calcium hydroxide pastes for assessing pozzolanicity of supplementary cementitious materials	126767
Guo, Han / Liu, Yijie / Tai, Bowen / Zhang, Zhaocai / Zhu, Yu	Effect of environmental pH value on mechanical properties and microstructure of hardened sulphoaluminate cement paste	126848
Wang, Penggang / Fu, Hua / Zuo, Wenqiang / Luo, Shuqiong / Zhao, Haitao / Feng, Pan / Wang, Hui	Effect of n-C-S-H-PCE and slag powder on the autogenous shrinkage of high-strength steam-free pipe pile concrete	126815
Shin, Yoonjae / Park, Hyeong Min / Park, Jinha / Cho, Hongdong / Oh, Seo-Eun / Chung, Sang-Yeop / Yang, Beomjoo	Effect of polymer binder on the mechanical and microstructural properties of pervious pavement materials	126209
Ma, Qiang / Chen, Jun-feng / Xiao, Heng-lin / Pan, Yu-Tao / Song, Zhong-nan	Effect of polyurethane foam adhesive on the static mechanical properties of municipal solid waste incineration bottom ash (IBA)	126460
Xue, Kaiwang / Wan, Chaojun / Xu, Yaowen / Jiang, Yuping / Cheng, Yuqi	Effect of pre-hydration age on phase assemblage, microstructure and compressive strength of CO2 cured cement mortar	126760
Halil Akın, Muhammed / Polat, Rıza	The effect of vehicle waste tires on the mechanical, hardness and stress–strain properties of polyester-based polymer concretes	126741
Ji, Guangchao / Xiao, Jianzhuang / Zhi, Peng / Wu, Yu-Ching / Han, Nv	Effects of extrusion parameters on properties of 3D printing concrete with coarse aggregates	126740
Meng, Qingshan / Qin, Qinglong / Yang, Huamei / Wu, Wenjuan / Zhou, Haoran / Wu, Kai / Shi, Yan	Effects of high–low temperature cycles on the performance of coral aggregate concrete based on field specimens and laboratory accelerated tests	126596
Bian, Guan / Qi, Lin / Liu, Jianan / Wang, XiaoFeng / Xu, Xu / Wang, Zhenjun	Effects of tetraethyl orthosilicate on rheological behaviors of crumb rubber modified asphalt	126807
Jiang, Han / Wang, Shengyue / Wang, Guohao	Establish directional heat induced structure based on a grouting compound gradient thermal conductivity method	126610
Kuranlı, Ömer Faruk / Uysal, Mucteba / Abbas, Mele Tidjani / Cosgun, Turgay / Niş, Anıl / Aygörmez, Yurdakul / Canpolat, Orhan / Al-mashhadani, Mukhallad M.	Evaluation of slag/fly ash based geopolymer concrete with steel, polypropylene and polyamide fibers	126747
Zeiada, Waleed / Liu, Hanqi / Al-Khateeb, Ghazi G. / Shanableh, Abdallah / Samarai, Mufid	Evaluation of test methods for measurement of zero shear viscosity (ZSV) of asphalt binders	126794
Ronanki, Vidya Sagar / Aaleti, Sriram	Experimental and analytical investigation of UHPC confined concrete behavior	126710
Chen, Bo / Chen, Jialin / Chen, Xudong / Qiang, Sheng / Zheng, Yongjie	Experimental study on compressive strength and frost resistance of steam cured concrete with mineral admixtures	126725
Guan, Xinchun / Yu, Lingbo / Li, Hui	Experimental study on fracture mechanics of cementitious materials reinforced by graphene oxide–silica nanocomposites	126758
Wang, Qiang / Zhu, Hong / Zhang, Bai / Tong, Yixuan / Du, Hongjian	Exploratory study on the short- and long-term bond between ribbed CFRP bars and additional aluminum alloy ribs anchorage	126528
Kasaniya, Mahipal / Alaibani, Anfal / Thomas, Michael D. A. / Riding, Kyle A.	Exploring the efficacy of emerging reactivity tests in screening pozzolanic materials	126781
Lin, Juntao / Xia, Yu / Huo, Lin / Hong, Jinxiang / Zhu, Xiaobin / Wu, Shaopeng	Fatigue crack evolution and characteristic of cold recycled asphalt mixture in different dimensions	126818
Zhang, Jun / Bai, Jinxiao / Wang, Shouxin	Fatigue damage evolution rule of cement stabilized macadam used in pavement’s base course at different curing time	126827
Woon Park, Ji / Lee, Jeongun / Lim, Yun Mook	Flexural behavior prediction of a layered composite member with 3D textile reinforced concrete	126665
Chen, Anqi / Deng, Qinhao / Li, Yuanyuan / Bai, Tao / Chen, Zongwu / Li, Jian / Feng, Jianlin / Wu, Fan / Wu, Shaopeng / Liu, Quantao / Li, Chuangmin	Harmless treatment and environmentally friendly application of waste tires—TPCB/TPO composite-modified bitumen	126785
Ren, Haisheng / Qian, Zhendong / Huang, Weirong / Li, Huailong / Liu, Gang	High-temperature rheological properties of waterborne epoxy asphalt emulsion mastic	126796
Lin, Minguo / Chen, Geng / Chen, Yonghui / Han, Dandan / Xu, Jie	Hydrothermal solidification of alkali-activated clay-slaked lime mixtures	126660
Basha, Shaik Inayath / Aziz, Md. Abdul / Ahmad, Shamsad / Al-Zahrani, Mesfer M. / Shameem, Mohammed / Maslehuddin, Mohammed	Improvement of concrete durability using nanocomposite coating prepared by mixing epoxy coating with Submicron/Nano-carbon obtained from heavy fuel oil ash	126812
Coutinho, Yane / Montefalco, Lauro / Carneiro, Arnaldo	Influence of aggregate crushing on the results of accelerated alkali-silica reactivity tests	126737
Zhang, Xiaogang / Jiang, Ce / Chen, Yao / Yuan, Binyang / Memon, Shazim Ali / Ren, Jie / Xing, Feng / Sun, Hongfang	Influence of initial defects on the degradation of steel reinforced mortar exposed to cyclic wetting and drying environment based on 3D scanning	126591
Vijayaraghavan, J. / Jeevakkumar, R. / Venkatesan, G. / Rengasamy, M. / Thivya, J.	Influence of kaolin and dolomite as filler on bond strength of polyurethane coated reinforcement concrete	126675
Zhang, Wenyan / Lin, Huaxia / Xue, Mengfen / Wang, Shuai / Ran, Junsheng / Su, Faqiang / Zhu, Jianping	Influence of shrinkage reducing admixtures on the performance of cementitious composites: A review	126579
Sun, Junfeng / Zhang, Haitao / Yu, Tengjiang / Wu, Guangyuan / Jia, Minghao	Influence of void content on noise reduction characteristics of different asphalt mixtures using meso-structural analysis	126806
Wang, Zhenqi / Wang, Yong / Cui, Liang / Bi, Cheng / Wu, Aixiang	Insight into the isothermal multiphysics processes in cemented paste backfill: Effect of curing time and cement-to-tailings ratio	126739
Fang, Ying / Zhang, Zhengqi / Shi, Jierong / Yang, Xinhong / Li, Xinjun	Insights into permeability of rejuvenator in old asphalt based on permeation theory: Permeation behaviors and micro characteristics	126765
Joshi, Suhas S. / Avadh, Kumar / Kuntal, Vikas Singh / Jiradilok, Punyawut / Nagai, Kohei	Investigating the effect of rebar corrosion order and arrangement on cracking behaviour of RC panels using 3D discrete analysis	126730
Huang, Tingting / Luo, Jing / Luo, Rong / Tu, Chongzhi	Investigation on the relationship between the surface texture index and the surface free energy of aggregate	126759
Li, Ning / Tang, Wei / Yu, Xin / Zhan, He / Wang, Xin / Wang, Zhongyuan	Laboratory investigation on blending process of reclaimed asphalt mixture	126793
Imran, Hamza / Ibrahim, Majed / Al-Shoukry, Suhad / Rustam, Furqan / Ashraf, Imran	Latest concrete materials dataset and ensemble prediction model for concrete compressive strength containing RCA and GGBFS materials	126525
Guo, Yadong / Onifade, Ibrahim / Birgisson, Björn	A mass specific volume-based viscoelastic damage model to characterize fatigue damage in asphalt mixtures	126729
Xiong, Guiyan / Guo, Xiaolu / Yuan, Shuting / Xia, Ming / Wang, Zhihao	The mechanical and structural properties of lunar regolith simulant based geopolymer under extreme temperature environment on the moon through experimental and simulation methods	126679
Min, Benzhi / Wang, Pengyu / Li, Shuzhou / Wang, Zhenqing	Mechanical influence of graphene oxide in the interface between calcium silicate hydrate and quartz: A molecular dynamics study	126597
van den Heever, Marchant / du Plessis, Anton / Bester, Frederick / Kruger, Jacques / van Zijl, Gideon	A mechanistic evaluation relating microstructural morphology to a modified Mohr-Griffith compression-shear constitutive model for 3D printed concrete	126743
Zhang, Xia / Chen, Enli / Li, Nanpeng / Wang, Lianfang / Si, Chundi / Wang, Cuiyan	Micromechanical analysis of the rutting evolution of asphalt pavement under temperature–stress coupling based on the discrete element method	126800
Huang, Xuquan / Shi, Ziyao / Wang, Zaiqian / Dong, Jiangfeng / Wang, Xiaoshu / Zhao, Xiaorong	Microstructure and performances of sludge soil stabilized by fluorogypsum-based cementitious binder	126702
Won, Jongmuk / Tutumluer, Erol / Byun, Yong-Hoon	Modeling cyclic behavior of unbound aggregates using two-surface plasticity theory	126774
Jin, Song / Zhao, Xiyao / Tai, Yating / Zhou, Jikai	Multiscale model for the scale effect of tensile strength of hardened cement paste based on pore size distribution	126775
Ren, Liang / Yu, Xianming / Guo, Zhongzhao / Xiao, Linfa	Numerical investigation of the dynamic increase factor of ultra-high performance concrete based on SHPB technology	126756
Liu, Qing-feng / Hu, Zhe / Wang, Xing-er / Zhao, Haitao / Qian, Kai / Li, Lin-jie / Meng, Zhaozheng	Numerical study on cracking and its effect on chloride transport in concrete subjected to external load	126797
Atef, Mohamed / Bassioni, Ghada / Azab, Nahid / Hazem Abdellatif, Mohamed	On the acoustical performance of eco-friendly cementitious composite with recycled fine rubber particles	126830
Liu, Jian / Liu, Fangyu / Zheng, Chuanfeng / Zhou, Daodao / Wang, Linbing	Optimizing asphalt mix design through predicting effective asphalt content and absorbed asphalt content using machine learning	126607
Eslami, Abolfazl / Mohammadi, Hosein / Mirabi Banadaki, Hosein	Palm fiber as a natural reinforcement for improving the properties of traditional adobe bricks	126808
Girimath, Shashibhushan / Singh, Dharamveer / Rajan, Bharat	Performance evaluation and mechanistic-empirical design of bio-oil modified asphalt mixes	126735
Xu, Ouming / Li, Yang / Xu, Rentao / Liu, Yamin / Dong, Yuming	Performance evaluation of waterborne epoxy resin modified emulsified asphalt mixtures for asphalt pavement pothole repair	126709
Ekinci, Enes / Türkmen, İbrahim / Birhanli, Emre	Performance of self-healing geopolymer paste produced using Bacillus subtilis	126837
Shi, Jinyan / Liu, Yuanchun / Wang, Enliang / Wang, Lizhi / Li, Changqing / Xu, Huijie / Zheng, Ximing / Yuan, Qiang	Physico-mechanical, thermal properties and durability of foamed geopolymer concrete containing cenospheres	126841
Adewoyin, Oluwafemi / Adesina, Adeyemi / Das, Sreekanta	Physico-thermal and microstructural properties of thermal-efficient mortars made with low cement content	126850
Dabiri, Hamed / Kheyroddin, Ali / Faramarzi, Asaad	Predicting tensile strength of spliced and non-spliced steel bars using machine learning- and regression-based methods	126835
Amiri, Mostafa / Hatami, Farzad	Prediction of mechanical and durability characteristics of concrete including slag and recycled aggregate concrete with artificial neural networks (ANNs)	126839
Zhou, Gang / Jiang, Wenjing / Li, Shuailong / Liu, Rulin / Zhang, Qingtao / Qi, Guansheng / He, Zhenglong	Preparation and performance analysis of dopamine hydrochloride functionalized E-51@MPF/SiO2 double-wall microcapsules for microcracks self-healing in cement-based materials	126622
Harbouz, Ilhame / Roziere, Emmanuel / Yahia, Ammar / Loukili, Ahmed	Printability assessment of cement-based materials based on rheology, hydration kinetics, and viscoelastic properties	126810
Li, Xun / Wang, Juan / Fang, Hongyuan	Quantitative analysis of geometric characteristics of crushed-stone-reinforced polymer composite microstructures	126829
Zhou, Zixian / Cui, Zhiwen / Yin, Shenxin / Kundu, Tribikram	A rapid acoustic source localization technique for early warning of building material damage	126840
Nalon, Gustavo Henrique / Santos, Rodrigo Felipe / Soares de Lima, Gustavo Emilio / Andrade, Igor Klaus Rocha / Pedroti, Leonardo Gonçalves / Ribeiro, José Carlos Lopes / Franco de Carvalho, José Maria	Recycling waste materials to produce self-sensing concretes for smart and sustainable structures: A review	126658
Li, Xiaoqi / Yu, Tianyu / Park, Soo-Jeong / Kim, Yun-Hae	Reinforcing effects of gypsum composite with basalt fiber and diatomite for improvement of high-temperature endurance	126762
Xu, Yongdong / He, Tingshu / Ma, Xiaodong / Yang, Renhe	The research on mechanism of C-S-H nanocrystal improving early properties of shotcrete at low temperature by thermodynamic modelling	126738
Hu, J. Y. / Zhang, S. S. / Chen, E. / Li, W. G.	A review on corrosion detection and protection of existing reinforced concrete (RC) structures	126718
Sun, Haoxian / Li, Haitao / Dauletbek, Assima / Lorenzo, Rodolfo / Corbi, Ileana / Corbi, Ottavia / Ashraf, Mahmud	Review on materials and structures inspired by bamboo	126656
Ibrahim, Mohammed / Rahman, Muhammed Kalimur / Najamuddin, Syed Khaja / Alhelal, Zakaria Saleh / Acero, Carlos E.	A review on utilization of industrial by-products in the production of controlled low strength materials and factors influencing the properties	126704
Liu, Bing / Ye, Junpeng / Liu, Xiaoyan / Lin, Weixin / Deng, Zhiheng / Liu, Qizhou	Shear strength and failure criterion of carbon fiber reinforced coral concrete under combined compression-shear stresses	126728
Rocha, Cecilia Gravina da / Saldanha, Rodrigo Beck / Tonini de Araújo, Mariana / Consoli, Nilo Cesar	Social and environmental assessments of Eco-friendly Pavement alternatives	126736
Rabi, Musab / Shamass, Rabee / Cashell, K. A.	Structural performance of stainless steel reinforced concrete members: A review	126673
Pires, Diego Menegusso / Schuster, Silvio Lisboa / Pivoto Specht, Luciano / Pereira, Deividi Da Silva / Biancardo, Salvatore Antonio	Study of the permanent deformation of asphalt mixtures in the field: A multiscale approach	126763
Song, Jiangkai / Xie, Jun / Wu, Shaopeng / Yang, Chao / Wang, Zhihu / Chen, Haisen / Shi, Yuming	Study on properties and improving mechanism of OGFC-13 asphalt mixtures modified by novel rubber pellets	126799
Li, Yang / Chen, Jinjie / Wang, Jianxi / Shi, Xianfeng / Wang, Rui	Study on the effects of solar reflective coatings on the interfacial damage of the CRTS II slab track	126711
Zhou, Rui / Zhu, Xuan / Ren, Wei-Xin / Zhou, Zhixiang / Yao, Guowen / Ma, Cong / Du, Yanliang	Thermal evolution of CRTS Ⅱ slab track under various environmental temperatures: Experimental study	126699
Amin, Sh K. / Ashmawy, N. M. F. / Abadir, M. F.	The use of tannery waste in the preparation of clay roof tiles	126393
Yinfei, Du / Wei, Huang / Mingxin, Dai / Weizheng, Liu	Using silicon carbide to increase thermal conductivity of cement composite for improving heating efficiency of floor heating system	126707
Chen, Y. K. / Sun, Y. / Wang, K. Q. / Kuang, W. Y. / Yan, S. R. / Wang, Z. H. / Lee, H. S.	Utilization of bio-waste eggshell powder as a potential filler material for cement: Analyses of zeta potential, hydration and sustainability	126220
Surendranath, Arigela / Ramana, P. V.	Valorization of bakelite plastic waste aimed at auxiliary comprehensive concrete	126851

About this
data sheet
IssueID
61245
Published on:
17/02/2022
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.