Construction and Building Materials - mars 2022

Publié:	mars 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Gan, Manguang / Zhang, Liwei / Wang, Yan / Mei, Kaiyuan / Fu, Xiaojuan / Cheng, Xiaowei / Bai, Mingxing / Liu, Hejuan / Li, Xiaochun	3D micro-structural changes of an artificial flow channel in wellbore cement under geologic CO2 storage conditions: Combined effect of effective stress and flow	126761
Li, Qiang / Zeng, Xianhui / Wang, Jiaqing / Luo, Sang / Meng, Yuanpeng / Gao, Lei / Wang, Xiaowei	Aging performance of high viscosity modified asphalt under complex heat-light-water coupled conditions	126314
Curci, Henrique C. F. / de Andrade, Renan P. / Maranhão, Flavio L. / Gomes, Henrique C. / Campello, Eduardo M. B.	Analysis of adhered tiling systems based on experimental evaluation and numerical modeling	126746
Liu, Zhen / Gu, Xingyu / Ren, Hua / Zhou, Zhou / Wang, Xiang / Tang, Shi	Analysis of the dynamic responses of asphalt pavement based on full-scale accelerated testing and finite element simulation	126429
Song, Weiran / Zhao, Shangyong / Zhang, Yiming / Ruan, Cheng / Huang, Ao / Hu, Xiao / Zhao, Min / Zhou, Wen / Wang, Ji / Wang, Xuebao / Wang, Hui / Hou, Zongyu / Wang, Zhe	Application of laser-induced breakdown spectroscopy and chemometrics for rapid identification of fire-retardant/resistant coatings from fire residues	126773
Goodwin, Jodie / Woods, Joshua E. / Hoult, Neil A.	Assessing the structural behaviour of glued-laminated timber beams using distributed strain sensing	126844
Bakhbergen, Umut / Shon, Chang-Seon / Zhang, Dichuan / Kryzhanovskiy, Kirill / Kim, Jong R.	Assessment of Reactive powder concrete subjected to three different sodium sulfate Concentrations: Compressive Strength, Absorption, Porosity, Microstructure, and durability	126804
Turco, Chiara / de Paula Junior, Adilson / Teixeira, Elisabete / Mateus, Ricardo	Authors closure to the Discussion of the Review article “Optimisation of Compressed earth blocks (CEBs) using natural origin materials: A systematic literature review”	126888
Xu, Yang / Han, Hongyang / Ning, Na / Qie, Luchao / Ling, Xing / Li, Yi	Ballast loading plate design and mechanical behavior of under ballast mats	126486
Palese, Michael / Zarembski, Allan M. / Huang, Hai / Palese, Joseph	Ballast particle dynamic response as a function of subgrade support using statistical methods	126772
Chen, Zongping / Jia, Hengrui / Li, Shengxin	Bond behavior of recycled aggregate concrete-filled steel tube after elevated temperatures	126683
Rakhimova, Nailia	Calcium and/or magnesium carbonate and carbonate-bearing rocks in the development of alkali-activated cements – A review	126742
Liu, Xin / Feng, Pan / Cai, Yuxi / Yu, Xiaohan / Liu, Qi	Carbonation behaviors of calcium silicate hydrate (C-S-H): Effects of aluminum	126825
Xie, Hongzhang / Ren, Changzai / Zhao, Baofeng / Liu, Suxiang / Zhu, Di / Guan, Haibin / Xu, Dan / Wang, Jingwei / Yang, Huajian	Characterization and use of biomass power plant ash in sulfoaluminate cementitious materials	126667
Ávila, Fernando / Puertas, Esther / Gallego, Rafael	Characterization of the mechanical and physical properties of stabilized rammed earth: A review	126693
Marras, Graziella / Carcangiu, Gianfranco / Meloni, Paola / Careddu, Nicola	Circular economy in marble industry: From stone scraps to sustainable water-based paints	126768
Lu, Dechun / Su, Cancan / Zhou, Xin / Wang, Guosheng / Du, Xiuli	A cohesion-friction combined hardening plastic model of concrete with the nonorthogonal flow rule: Theory and numerical implementation	126586
Cui, Qi / Maierdan, Yierfan / Chen, Bing / Ge, Junjian / Liu, Ning	Comparative research on the application of slag as an alternative to cement in binder-bentonite cutoff wall backfills	126817
Aldagari, Sand / Kabir, Sk Faisal / Fini, Elham H.	A comparative study on efficacy of waste plastic and waste Rubber in bitumen	126724
Liu, Hengrui / Tian, Zhenghong / Sun, Xiao / Ma, Yuanshan / Fan, Haoyue / Dong, Yun	A conceptual model focusing on internal flocculation structures and water film thickness for analyzing fresh properties of cement paste containing attapulgite	126836
Wang, Danqian / Wang, Ye / Wang, Jinxing / Ma, Kai / Dai, Chaoneng / Wang, Jingfeng / Pan, Fusheng	Corrosion resistance of Mg-Al-Zn magnesium alloy concrete formwork in Portland cement paste	126745
Jin, Xiaodong / Cui, Suping / Zhang, Yao / Zhao, Xinxin / Lv, Feng / Sun, Shibing / Tian, Yingliang / Zhao, Zhiyong / Liu, Donghua	Covalent bonding of the extruded polystyrene foams to mortar through ultraviolet-ozone irradiation	126801
Li, Zhonghao / Zhang, Xiaomeng / Song, Shasha / Xu, Kang / Lyu, Jianxiong / Li, Xianjun	Curing characteristics of low molecular weight melamine-urea–formaldehyde (MUF) resin-impregnated poplar wood	126814
Stahlbuhk, Amelie / Steiger, Michael	Damage potential and supersaturation of KNO3 and relevance in the field of salt damage to porous building material	126516
Dang, L. Minh / Wang, Hanxiang / Li, Yanfen / Nguyen, Tan N. / Moon, Hyeonjoon	DefectTR: End-to-end defect detection for sewage networks using a transformer	126584
Naciri, Khalil / Aalil, Issam / Chaaba, Ali	Eco-friendly gypsum-lime mortar with the incorporation of recycled waste brick	126770
Zhao, Gaowen / Guo, Mengzhen / Wang, Zhuo / Hu, Yiqi / Li, Shaomin / Wei, Feng	Effect of Ca2+ on the sulfate multiple combined induced degradation of early aged mortar	126769
Wang, Tiantian / Wang, Yanxin / Song, Tong / Dong, Quanxiao / Li, Qian / Wang, Shiwei	Effect of crystalline control on the water retention and degradation of Poly(lactic acid) composite in concrete curing	126834
de Azevedo Basto, Priscilla / Estolano de Lima, Victor / de Melo Neto, Antonio A.	Effect of curing temperature in the relative decrease peak intensity of calcium hydroxide pastes for assessing pozzolanicity of supplementary cementitious materials	126767
Guo, Han / Liu, Yijie / Tai, Bowen / Zhang, Zhaocai / Zhu, Yu	Effect of environmental pH value on mechanical properties and microstructure of hardened sulphoaluminate cement paste	126848
Wang, Penggang / Fu, Hua / Zuo, Wenqiang / Luo, Shuqiong / Zhao, Haitao / Feng, Pan / Wang, Hui	Effect of n-C-S-H-PCE and slag powder on the autogenous shrinkage of high-strength steam-free pipe pile concrete	126815
Shin, Yoonjae / Park, Hyeong Min / Park, Jinha / Cho, Hongdong / Oh, Seo-Eun / Chung, Sang-Yeop / Yang, Beomjoo	Effect of polymer binder on the mechanical and microstructural properties of pervious pavement materials	126209
Ma, Qiang / Chen, Jun-feng / Xiao, Heng-lin / Pan, Yu-Tao / Song, Zhong-nan	Effect of polyurethane foam adhesive on the static mechanical properties of municipal solid waste incineration bottom ash (IBA)	126460
Xue, Kaiwang / Wan, Chaojun / Xu, Yaowen / Jiang, Yuping / Cheng, Yuqi	Effect of pre-hydration age on phase assemblage, microstructure and compressive strength of CO2 cured cement mortar	126760
Halil Akın, Muhammed / Polat, Rıza	The effect of vehicle waste tires on the mechanical, hardness and stress–strain properties of polyester-based polymer concretes	126741
Ji, Guangchao / Xiao, Jianzhuang / Zhi, Peng / Wu, Yu-Ching / Han, Nv	Effects of extrusion parameters on properties of 3D printing concrete with coarse aggregates	126740
Meng, Qingshan / Qin, Qinglong / Yang, Huamei / Wu, Wenjuan / Zhou, Haoran / Wu, Kai / Shi, Yan	Effects of high–low temperature cycles on the performance of coral aggregate concrete based on field specimens and laboratory accelerated tests	126596
Bian, Guan / Qi, Lin / Liu, Jianan / Wang, XiaoFeng / Xu, Xu / Wang, Zhenjun	Effects of tetraethyl orthosilicate on rheological behaviors of crumb rubber modified asphalt	126807
Jiang, Han / Wang, Shengyue / Wang, Guohao	Establish directional heat induced structure based on a grouting compound gradient thermal conductivity method	126610
Kuranlı, Ömer Faruk / Uysal, Mucteba / Abbas, Mele Tidjani / Cosgun, Turgay / Niş, Anıl / Aygörmez, Yurdakul / Canpolat, Orhan / Al-mashhadani, Mukhallad M.	Evaluation of slag/fly ash based geopolymer concrete with steel, polypropylene and polyamide fibers	126747
Zeiada, Waleed / Liu, Hanqi / Al-Khateeb, Ghazi G. / Shanableh, Abdallah / Samarai, Mufid	Evaluation of test methods for measurement of zero shear viscosity (ZSV) of asphalt binders	126794
Ronanki, Vidya Sagar / Aaleti, Sriram	Experimental and analytical investigation of UHPC confined concrete behavior	126710
Chen, Bo / Chen, Jialin / Chen, Xudong / Qiang, Sheng / Zheng, Yongjie	Experimental study on compressive strength and frost resistance of steam cured concrete with mineral admixtures	126725
Guan, Xinchun / Yu, Lingbo / Li, Hui	Experimental study on fracture mechanics of cementitious materials reinforced by graphene oxide–silica nanocomposites	126758
Wang, Qiang / Zhu, Hong / Zhang, Bai / Tong, Yixuan / Du, Hongjian	Exploratory study on the short- and long-term bond between ribbed CFRP bars and additional aluminum alloy ribs anchorage	126528
Kasaniya, Mahipal / Alaibani, Anfal / Thomas, Michael D. A. / Riding, Kyle A.	Exploring the efficacy of emerging reactivity tests in screening pozzolanic materials	126781
Lin, Juntao / Xia, Yu / Huo, Lin / Hong, Jinxiang / Zhu, Xiaobin / Wu, Shaopeng	Fatigue crack evolution and characteristic of cold recycled asphalt mixture in different dimensions	126818
Zhang, Jun / Bai, Jinxiao / Wang, Shouxin	Fatigue damage evolution rule of cement stabilized macadam used in pavement’s base course at different curing time	126827
Woon Park, Ji / Lee, Jeongun / Lim, Yun Mook	Flexural behavior prediction of a layered composite member with 3D textile reinforced concrete	126665
Chen, Anqi / Deng, Qinhao / Li, Yuanyuan / Bai, Tao / Chen, Zongwu / Li, Jian / Feng, Jianlin / Wu, Fan / Wu, Shaopeng / Liu, Quantao / Li, Chuangmin	Harmless treatment and environmentally friendly application of waste tires—TPCB/TPO composite-modified bitumen	126785
Ren, Haisheng / Qian, Zhendong / Huang, Weirong / Li, Huailong / Liu, Gang	High-temperature rheological properties of waterborne epoxy asphalt emulsion mastic	126796
Lin, Minguo / Chen, Geng / Chen, Yonghui / Han, Dandan / Xu, Jie	Hydrothermal solidification of alkali-activated clay-slaked lime mixtures	126660
Basha, Shaik Inayath / Aziz, Md. Abdul / Ahmad, Shamsad / Al-Zahrani, Mesfer M. / Shameem, Mohammed / Maslehuddin, Mohammed	Improvement of concrete durability using nanocomposite coating prepared by mixing epoxy coating with Submicron/Nano-carbon obtained from heavy fuel oil ash	126812
Coutinho, Yane / Montefalco, Lauro / Carneiro, Arnaldo	Influence of aggregate crushing on the results of accelerated alkali-silica reactivity tests	126737
Zhang, Xiaogang / Jiang, Ce / Chen, Yao / Yuan, Binyang / Memon, Shazim Ali / Ren, Jie / Xing, Feng / Sun, Hongfang	Influence of initial defects on the degradation of steel reinforced mortar exposed to cyclic wetting and drying environment based on 3D scanning	126591
Vijayaraghavan, J. / Jeevakkumar, R. / Venkatesan, G. / Rengasamy, M. / Thivya, J.	Influence of kaolin and dolomite as filler on bond strength of polyurethane coated reinforcement concrete	126675
Zhang, Wenyan / Lin, Huaxia / Xue, Mengfen / Wang, Shuai / Ran, Junsheng / Su, Faqiang / Zhu, Jianping	Influence of shrinkage reducing admixtures on the performance of cementitious composites: A review	126579
Sun, Junfeng / Zhang, Haitao / Yu, Tengjiang / Wu, Guangyuan / Jia, Minghao	Influence of void content on noise reduction characteristics of different asphalt mixtures using meso-structural analysis	126806
Wang, Zhenqi / Wang, Yong / Cui, Liang / Bi, Cheng / Wu, Aixiang	Insight into the isothermal multiphysics processes in cemented paste backfill: Effect of curing time and cement-to-tailings ratio	126739
Fang, Ying / Zhang, Zhengqi / Shi, Jierong / Yang, Xinhong / Li, Xinjun	Insights into permeability of rejuvenator in old asphalt based on permeation theory: Permeation behaviors and micro characteristics	126765
Joshi, Suhas S. / Avadh, Kumar / Kuntal, Vikas Singh / Jiradilok, Punyawut / Nagai, Kohei	Investigating the effect of rebar corrosion order and arrangement on cracking behaviour of RC panels using 3D discrete analysis	126730
Huang, Tingting / Luo, Jing / Luo, Rong / Tu, Chongzhi	Investigation on the relationship between the surface texture index and the surface free energy of aggregate	126759
Li, Ning / Tang, Wei / Yu, Xin / Zhan, He / Wang, Xin / Wang, Zhongyuan	Laboratory investigation on blending process of reclaimed asphalt mixture	126793
Imran, Hamza / Ibrahim, Majed / Al-Shoukry, Suhad / Rustam, Furqan / Ashraf, Imran	Latest concrete materials dataset and ensemble prediction model for concrete compressive strength containing RCA and GGBFS materials	126525
Guo, Yadong / Onifade, Ibrahim / Birgisson, Björn	A mass specific volume-based viscoelastic damage model to characterize fatigue damage in asphalt mixtures	126729
Xiong, Guiyan / Guo, Xiaolu / Yuan, Shuting / Xia, Ming / Wang, Zhihao	The mechanical and structural properties of lunar regolith simulant based geopolymer under extreme temperature environment on the moon through experimental and simulation methods	126679
Min, Benzhi / Wang, Pengyu / Li, Shuzhou / Wang, Zhenqing	Mechanical influence of graphene oxide in the interface between calcium silicate hydrate and quartz: A molecular dynamics study	126597
van den Heever, Marchant / du Plessis, Anton / Bester, Frederick / Kruger, Jacques / van Zijl, Gideon	A mechanistic evaluation relating microstructural morphology to a modified Mohr-Griffith compression-shear constitutive model for 3D printed concrete	126743
Zhang, Xia / Chen, Enli / Li, Nanpeng / Wang, Lianfang / Si, Chundi / Wang, Cuiyan	Micromechanical analysis of the rutting evolution of asphalt pavement under temperature–stress coupling based on the discrete element method	126800
Huang, Xuquan / Shi, Ziyao / Wang, Zaiqian / Dong, Jiangfeng / Wang, Xiaoshu / Zhao, Xiaorong	Microstructure and performances of sludge soil stabilized by fluorogypsum-based cementitious binder	126702
Won, Jongmuk / Tutumluer, Erol / Byun, Yong-Hoon	Modeling cyclic behavior of unbound aggregates using two-surface plasticity theory	126774
Jin, Song / Zhao, Xiyao / Tai, Yating / Zhou, Jikai	Multiscale model for the scale effect of tensile strength of hardened cement paste based on pore size distribution	126775
Ren, Liang / Yu, Xianming / Guo, Zhongzhao / Xiao, Linfa	Numerical investigation of the dynamic increase factor of ultra-high performance concrete based on SHPB technology	126756
Liu, Qing-feng / Hu, Zhe / Wang, Xing-er / Zhao, Haitao / Qian, Kai / Li, Lin-jie / Meng, Zhaozheng	Numerical study on cracking and its effect on chloride transport in concrete subjected to external load	126797
Atef, Mohamed / Bassioni, Ghada / Azab, Nahid / Hazem Abdellatif, Mohamed	On the acoustical performance of eco-friendly cementitious composite with recycled fine rubber particles	126830
Liu, Jian / Liu, Fangyu / Zheng, Chuanfeng / Zhou, Daodao / Wang, Linbing	Optimizing asphalt mix design through predicting effective asphalt content and absorbed asphalt content using machine learning	126607
Eslami, Abolfazl / Mohammadi, Hosein / Mirabi Banadaki, Hosein	Palm fiber as a natural reinforcement for improving the properties of traditional adobe bricks	126808
Girimath, Shashibhushan / Singh, Dharamveer / Rajan, Bharat	Performance evaluation and mechanistic-empirical design of bio-oil modified asphalt mixes	126735
Xu, Ouming / Li, Yang / Xu, Rentao / Liu, Yamin / Dong, Yuming	Performance evaluation of waterborne epoxy resin modified emulsified asphalt mixtures for asphalt pavement pothole repair	126709
Ekinci, Enes / Türkmen, İbrahim / Birhanli, Emre	Performance of self-healing geopolymer paste produced using Bacillus subtilis	126837
Shi, Jinyan / Liu, Yuanchun / Wang, Enliang / Wang, Lizhi / Li, Changqing / Xu, Huijie / Zheng, Ximing / Yuan, Qiang	Physico-mechanical, thermal properties and durability of foamed geopolymer concrete containing cenospheres	126841
Adewoyin, Oluwafemi / Adesina, Adeyemi / Das, Sreekanta	Physico-thermal and microstructural properties of thermal-efficient mortars made with low cement content	126850
Dabiri, Hamed / Kheyroddin, Ali / Faramarzi, Asaad	Predicting tensile strength of spliced and non-spliced steel bars using machine learning- and regression-based methods	126835
Amiri, Mostafa / Hatami, Farzad	Prediction of mechanical and durability characteristics of concrete including slag and recycled aggregate concrete with artificial neural networks (ANNs)	126839
Zhou, Gang / Jiang, Wenjing / Li, Shuailong / Liu, Rulin / Zhang, Qingtao / Qi, Guansheng / He, Zhenglong	Preparation and performance analysis of dopamine hydrochloride functionalized E-51@MPF/SiO2 double-wall microcapsules for microcracks self-healing in cement-based materials	126622
Harbouz, Ilhame / Roziere, Emmanuel / Yahia, Ammar / Loukili, Ahmed	Printability assessment of cement-based materials based on rheology, hydration kinetics, and viscoelastic properties	126810
Li, Xun / Wang, Juan / Fang, Hongyuan	Quantitative analysis of geometric characteristics of crushed-stone-reinforced polymer composite microstructures	126829
Zhou, Zixian / Cui, Zhiwen / Yin, Shenxin / Kundu, Tribikram	A rapid acoustic source localization technique for early warning of building material damage	126840
Nalon, Gustavo Henrique / Santos, Rodrigo Felipe / Soares de Lima, Gustavo Emilio / Andrade, Igor Klaus Rocha / Pedroti, Leonardo Gonçalves / Ribeiro, José Carlos Lopes / Franco de Carvalho, José Maria	Recycling waste materials to produce self-sensing concretes for smart and sustainable structures: A review	126658
Li, Xiaoqi / Yu, Tianyu / Park, Soo-Jeong / Kim, Yun-Hae	Reinforcing effects of gypsum composite with basalt fiber and diatomite for improvement of high-temperature endurance	126762
Xu, Yongdong / He, Tingshu / Ma, Xiaodong / Yang, Renhe	The research on mechanism of C-S-H nanocrystal improving early properties of shotcrete at low temperature by thermodynamic modelling	126738
Hu, J. Y. / Zhang, S. S. / Chen, E. / Li, W. G.	A review on corrosion detection and protection of existing reinforced concrete (RC) structures	126718
Sun, Haoxian / Li, Haitao / Dauletbek, Assima / Lorenzo, Rodolfo / Corbi, Ileana / Corbi, Ottavia / Ashraf, Mahmud	Review on materials and structures inspired by bamboo	126656
Ibrahim, Mohammed / Rahman, Muhammed Kalimur / Najamuddin, Syed Khaja / Alhelal, Zakaria Saleh / Acero, Carlos E.	A review on utilization of industrial by-products in the production of controlled low strength materials and factors influencing the properties	126704
Liu, Bing / Ye, Junpeng / Liu, Xiaoyan / Lin, Weixin / Deng, Zhiheng / Liu, Qizhou	Shear strength and failure criterion of carbon fiber reinforced coral concrete under combined compression-shear stresses	126728
Rocha, Cecilia Gravina da / Saldanha, Rodrigo Beck / Tonini de Araújo, Mariana / Consoli, Nilo Cesar	Social and environmental assessments of Eco-friendly Pavement alternatives	126736
Rabi, Musab / Shamass, Rabee / Cashell, K. A.	Structural performance of stainless steel reinforced concrete members: A review	126673
Pires, Diego Menegusso / Schuster, Silvio Lisboa / Pivoto Specht, Luciano / Pereira, Deividi Da Silva / Biancardo, Salvatore Antonio	Study of the permanent deformation of asphalt mixtures in the field: A multiscale approach	126763
Song, Jiangkai / Xie, Jun / Wu, Shaopeng / Yang, Chao / Wang, Zhihu / Chen, Haisen / Shi, Yuming	Study on properties and improving mechanism of OGFC-13 asphalt mixtures modified by novel rubber pellets	126799
Li, Yang / Chen, Jinjie / Wang, Jianxi / Shi, Xianfeng / Wang, Rui	Study on the effects of solar reflective coatings on the interfacial damage of the CRTS II slab track	126711
Zhou, Rui / Zhu, Xuan / Ren, Wei-Xin / Zhou, Zhixiang / Yao, Guowen / Ma, Cong / Du, Yanliang	Thermal evolution of CRTS Ⅱ slab track under various environmental temperatures: Experimental study	126699
Amin, Sh K. / Ashmawy, N. M. F. / Abadir, M. F.	The use of tannery waste in the preparation of clay roof tiles	126393
Yinfei, Du / Wei, Huang / Mingxin, Dai / Weizheng, Liu	Using silicon carbide to increase thermal conductivity of cement composite for improving heating efficiency of floor heating system	126707
Chen, Y. K. / Sun, Y. / Wang, K. Q. / Kuang, W. Y. / Yan, S. R. / Wang, Z. H. / Lee, H. S.	Utilization of bio-waste eggshell powder as a potential filler material for cement: Analyses of zeta potential, hydration and sustainability	126220
Surendranath, Arigela / Ramana, P. V.	Valorization of bakelite plastic waste aimed at auxiliary comprehensive concrete	126851

Informations
sur cette fiche
IssueID
61245
Publié(e) le:
17.02.2022
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.