Construction and Building Materials - January 2022

Published:	January 2022

Articles in this Issue

Author(s)	Title	Page(s)
Liu, Junli / Li, Shuai / Gunasekara, Chamila / Fox, Kate / Tran, Phuong	3D-printed concrete with recycled glass: Effect of glass gradation on flexural strength and microstructure	125561
Alade, Adefemi Adebisi / Naghizadeh, Zahra / Wessels, Coenraad Brand / Stolze, Hannes / Militz, Holger	Adhesion performance of melamine-urea–formaldehyde joints of copper azole-treated Eucalyptus grandis at varied bonding process conditions	125682
Liu, Chao / Zhang, Rongfei / Liu, Huawei / He, Chunhui / Wang, Youqiang / Wu, Yiwen / Liu, Shuhua / Song, Lin / Zuo, Fan	Analysis of the mechanical performance and damage mechanism for 3D printed concrete based on pore structure	125572
Fang, Ying / Zhang, Zhengqi / Zhang, Hongjiang / Li, Weiyong	Analysis of wetting behavior and its influencing factors of rejuvenator/old asphalt interface based on surface wetting theory	125674
Wu, Chenwei / Xue, Jianyang / Song, Dejun / Liang, Xuanwen	Analysis on the mechanical performance of Dougong bracket sets under eccentric vertical load	125652
Cheng, Yingyao / Chan, Andrew H. C. / Holloway, Damien / Nolan, Gregory	Anisotropic material behaviour under compression of Eucalyptus nitens with high moisture content	124788
Kosiachevskyi, D. / Abahri, K. / Daubresse, A. / Prat, E. / Chaouche, M.	Assessment of the hygrothermal, microstructural and chemical evolution of a hemp-based cementitious mortar under ETICS total weathering aging protocol	125471
Nguyen, Quang Dieu / Afroz, Sumaiya / Zhang, Yingda / Kim, Taehwan / Li, Wengui / Castel, Arnaud	Autogenous and total shrinkage of limestone calcined clay cement (LC3) concretes	125720
Pei, Chun / Wei, Liangliang / Qin, Zhaojun / Yu, Hongtao / Zhu, Ji-Hua / Xing, Feng	Behavior and design of nano/micro-scale carbon modified multifunctional cementitious composites	125506
Zhao, Nan / Wang, Sheliang / Quan, Xiaoyi / Liu, Kangning / Xu, Jin / Xu, Fan	Behavior of fiber reinforced cementitious composites under the coupled attack of sulfate and dry/wet in a tidal environment	125673
Wu, Liwei / Guo, Xueyuan / Chen, Haibin / Liu, Junyang / Su, Youpo	Calculation method for the axial load-bearing capacity of steel pipe-to-sleeve grouted connections	125621
Song, Chen / Jiang, Chao / Gu, Xiang-Lin / Zhang, Qiang / Zhang, Wei-Ping	Calibration analysis of chloride binding capacity for cement-based materials under various exposure conditions	125588
Rahou, Jihad / Rezqi, Halima / El Ouahabi, Meriam / Fagel, Nathalie	Characterization of Moroccan steel slag waste: The potential green resource for ceramic production	125663
Ben, Xunqin / Jiang, Linhua / Guo, Ming-Zhi / Meng, Yuanyuan / Chen, Lei / Jin, Weizhun / Wang, Fei	Chloride erosion resistance of calcium formate incorporated cement mortar under chloride attack	125611
Tang, Jin / Wang, Hao	Coarse grained modeling of nanostructure and asphaltene aggregation in asphalt binder using dissipative particle dynamics	125605
Lal, Hiran Mayookh / Uthaman, Arya / Li, Chenggao / Xian, Guijun / Thomas, Sabu	Combined effects of cyclic/sustained bending loading and water immersion on the interface shear strength of carbon/glass fiber reinforced polymer hybrid rods for bridge cable	125587
Przybyłowicz, Michał / Sysyn, Mykola / Gerber, Ulf / Kovalchuk, Vitalii / Fischer, Szabolcs	Comparison of the effects and efficiency of vertical and side tamping methods for ballasted railway tracks	125708
El Moustapha, Bouha / Bonnet, Stéphanie / Khelidj, Abdelhafid / Leklou, Nordine / Froelich, Daniel / Babah, Isselmou Ahmedou / Charbuillet, Carole / Khalifa, Abderahmane	Compensation of the negative effects of micro-encapsulated phase change materials by incorporating metakaolin in geopolymers based on blast furnace slag	125556
Alajarmeh, Omar / Manalo, Allan / Benmokrane, Brahim / Schubel, Peter / Zeng, Xuesen / Ahmad, Afaq / Hassanli, Reza / Sorbello, Charles-Dean	Compression behavior of GFRP bars under elevated In-Service temperatures	125675
Wei, Yang / Xu, Pengfei / Zhang, Yirui / Wang, Gaofei / Zheng, Kaiqi	Compressive behaviour of FRP-steel wire mesh composite tubes filled with seawater and sea sand concrete	125608
Xu, Wenqiang / Li, Yu / Li, Hanzhang / Wang, Kang / Zhang, Chengpeng / Jiang, Yibo / Qiang, Sheng	Corrosion mechanism and damage characteristic of steel fiber concrete under the effect of stray current and salt solution	125618
Liu, Chen-Xu / Yu, Gui-Lan	Deep learning-based topology design of periodic barrier for full-mode waves	125579
Lochan, Philip Prakash / Polak, Maria Anna	Determination of tensile strength of GFRP bars using flexure tests	125630
Wang, Shujuan / Zhang, Tao / Zhang, Xiaolin / Ge, Shengbo / Fan, Wei	Development of 3D needled composite from denim waste and polypropylene fibers for structural applications	125583
Luo, Haisong / Zheng, Chuanfeng / Yang, Xue / Bao, Chonghao / Liu, Wenyue / Lin, Zhi	Development of technology to accelerate SBS-modified asphalts swelling in dry modification mode	125703
Huang, Yuantian / Tan, Jianli / Xuan, Xiaoxin / Wei, Shiju / Liu, Leping / Yu, Shujuan / Zheng, Guangjian	Durability of plant fiber reinforced alkali activated composites	125501
Azil, Athmane / Le Guern, Malo / Touati, Karim / Sebaibi, Nassim / Boutouil, Mohamed / Streiff, François / Goodhew, Steve / Gomina, Moussa	Earth construction: Field variabilities and laboratory reproducibility	125591
Singh, Sumit K. / Pandey, Akanksha / Ravindranath, Sham S.	Effect of additives on the thermal stability of SBS modified binders during storage at elevated temperatures	125609
Liu, Yifan / Yao, Ziyin / Wang, Feibin / Huang, Hui / Que, Zeli	Effect of arrangement distances on stiffness of shear-tension mode in timber-to-timber connections with inclined screws	125592
Zhang, Longguan / Liang, Zhenzhen / Li, Shengli	Effect of current density on the cathodic protection efficiency and mechanical properties of pre-stressed high-strength steel wires for stay cable	125671
Camargo, Ingrid / Hofko, Bernhard / Mirwald, Johannes	Effect of DLTDP and furfural on asphalt binders: Optimal dosage and PG grading	125489
Liu, Miao / Cai, Lixiong / Luo, Hanbin	Effect of nano-silica on microbiologically induced calcium carbonate precipitation	125661
Zhao, Yazhou / Zhu, Zhenyu / Chen, Yang / Li, Shagang / Zhao, Yue / Li, Xiaoyu / Wu, Min / Chen, Da	Effect of TEA·H3PO4 and TEA·C18H30O3S on the mechanical properties and hydration characteristics of cement paste	125635
Cheng, Long / Zhang, Lei / Lei, Yuechao / Ma, Yang / Yan, Chuanqi	Effect of the laboratory short-term aging temperature on the chemical and rheological characteristics of high modulus asphalts	125569
Abdelrazik, Ahmed / Khayat, Kamal H.	Effect of type and content of expansive agent on performance of fiber-reinforced concrete with adapted rheology	125610
Yu, Lei / Liu, Chunhui / Mei, Hua / Xia, Yu / Liu, Zhen / Xu, Feng / Zhou, Cuiying	Effects of aggregate and interface characteristics on chloride diffusion in concrete based on 3D random aggregate model	125690
Xu, Jie / Kong, Chengwei / Xu, Tao	Effects of deposition states and distribution regularity of clogging substances on pore clogging behaviors of double-layer drainage asphalt pavement	125701
Luan, Congqi / Zhou, Yong / Liu, Yongyi / Ren, Zunchao / Wang, Jinbang / Yuan, Lianwang / Du, Shuang / Zhou, Zonghui / Huang, Yongbo	Effects of nano-SiO2, nano-CaCO3 and nano-TiO2 on properties and microstructure of the high content calcium silicate phase cement (HCSC)	125377
Lyratzakis, Alexandros / Tsompanakis, Yiannis / Psarropoulos, Prodromos N.	Efficient mitigation of high-speed train vibrations on adjacent reinforced concrete buildings	125653
Abubakri, Shahriar / Mangat, P. S. / Starinieri, Vincenzo / Lomboy, Gilson R.	Electric curing parameters of mortar and its mechanical properties in cold weather	125615
Haider, Muhammad Zeeshan / Jin, Xinghan / Sharma, Raju / Pei, Junjie / Hu, Jong Wan	Enhancing the compressive strength of thermal energy storage concrete containing a low-temperature phase change material using silica fume and multiwalled carbon nanotubes	125659
Klima, K. M. / Schollbach, K. / Brouwers, H. J. H. / Yu, Qingliang	Enhancing the thermal performance of Class F fly ash-based geopolymer by sodalite	125574
Han, Li-Jun / Li, Jiang-Shan / Xue, Qiang / Guo, Ming-Zhi / Wang, Ping / Poon, Chi Sun	Enzymatically induced phosphate precipitation (EIPP) for stabilization/solidification (S/S) treatment of heavy metal tailings	125577
Liu, Qi / Liu, Jinzhou / Yu, Bin / Zhang, Jiupeng / Pei, Jianzhong	Evaluation and optimization of asphalt binder and mixture modified with high activated crumb rubber content	125676
Tan, Kanghao / Qin, Yinghong / Wang, Junsong	Evaluation of the properties and carbon sequestration potential of biochar-modified pervious concrete	125648
Abdi-Goudarzi, S. / Ziaie-Moayed, R. / Nazeri, A.	An experimental evaluation of geocomposite-reinforced soil sections	125566
Akhtar, Tauqeer / Ali, Babar / Kahla, Nabil Ben / Kurda, Rawaz / Rizwan, Muhammad / Mohsin Javed, Mohammad / Raza, Ali	Experimental investigation of eco-friendly high strength fiber-reinforced concrete developed with combined incorporation of tyre-steel fiber and fly ash	125626
Feng, Qian / Wei, Peng / Zhao, Kexuan / Xu, Rongqiao	Experimental investigation of stirrup confinement effects on bond-slip responses for corner and middle bars	125629
Xue, Congcong / Yu, Min / Xu, Haoming / Xu, Lihua / Saafi, Mohamed / Ye, Jianqiao	Experimental study on thermal performance of ultra-high performance concrete with coarse aggregates at high temperature	125585
Li, Anbang / Xu, Shanhua / Wang, Youde / Wu, Cheng / Nie, Biao	Fatigue behavior of corroded steel plates strengthened with CFRP plates	125707
Saed, Seyed Ataollah / Karimi, Hamid Reza / Rad, Sina Mousavi / Aliha, M. R. M. / Shi, Xijun / Haghighatpour, Pegah Jafari	Full range I/II fracture behavior of asphalt mixtures containing RAP and rejuvenating agent using two different 3-point bend type configurations	125590
Mohamed, Rosnita / Abd Razak, Rafiza / Abdullah, Mohd Mustafa Al Bakri / Abd Rahim, Shayfull Zamree Abd / Yuan-Li, Long / Sandu, Andrei Victor / Wysłocki, Jerzy J.	Heat evolution of alkali-activated materials: A review on influence factors	125651
Wu, Chun-Ran / Zhan, Bao-Jian / Hong, Zhi-Qiang / Cui, Shi-Cai / Cui, Peng / Kou, Shi-Cong	Hydration behavior of circulating fluidized bed fly ash (CFBFA) as a cementitious binder	125625
Naran, Jake M. / Gonzalez, Rosa Eva Gonzalez / del Rey Castillo, Enrique / Toma, Charlotte Louise / Almesfer, Nasser / van Vreden, Pieter / Saggi, Opinder	Incorporating waste to develop environmentally-friendly concrete mixes	125599
Liu, Yuantao / Chen, Bing / Dong, Biqin / Wang, Yanshuai / Xing, Feng	Influence mechanisms of fly ash in magnesium ammonium phosphate cement	125581
Constancio Trindade, Ana Carolina / Liebscher, Marco / Curosu, Iurie / de Andrade Silva, Flávio / Mechtcherine, Viktor	Influence of elevated temperatures on the residual and quasi in-situ flexural strength of strain-hardening geopolymer composites (SHGC) reinforced with PVA and PE fibers	125649
de França, Marylinda Santos / Cazacliu, Bogdan / Kränkel, Thomas / Savastano Jr., Holmer	Influence of measuring system on rheological behavior of PVA-fiber reinforced mortars	125613
Karimipour, Arash	Influence of micro polypropylene fibres on the fracture energy and mechanical characteristics of recycled coarse brick aggregate concrete	125667
Cruz, Gabryelle Keith Avelino / de Medeiros Melo Neto, Osires / Arruda, Sonaly Mendes / de Figueirêdo Lopes Lucena, Lêda Christiane / Ziegler, Christian Rafael / da Silva, Gustavo Correia Basto	Influence of particle size selection methods on asphalt mixtures produced with lateritic aggregates	125201
Chen, Chen / Gu, Fan / Heitzman, Michael / Powell, Buzz / Kowalski, Karol	Influences of alternative friction aggregates on texture and friction characteristics of high friction surface treatment	125643
Zhang, Ran / Wang, Haoxiang / Ji, Jie / Suo, Zhi / Ou, Ziheng	Influences of different modification methods on surface activation of waste tire rubber powder applied in cement-based materials	125191
Xu, Tiangui / Wang, Yuzhuo / Liang, Chen	The interfacial bond-slip behavior of I-section steel and reactive powder concrete at high temperatures	125656
Ma, Xiang / Zhou, Peisheng / Wang, Lili / Jiang, Jiwang / Wang, Jiaqing	Internal structure change of porous asphalt concrete under coupled conditions of load, moisture and temperature	125603
Jiao, Liya / Elkashef, Mohamed / Harvey, John T. / Rahman, Mohammad Ashiqur / Jones, David	Investigation of fatigue performance of asphalt mixtures and FAM mixes with high recycled asphalt material contents	125607
Kamani, Mojtaba / Ajalloeian, Rassoul	Investigation of the changes in aggregate morphology during different aggregate abrasion/degradation tests using image analysis	125614
Karim, Ali Naman / Johansson, Pär / Sasic Kalagasidis, Angela	Knowledge gaps regarding the hygrothermal and long-term performance of aerogel-based coating mortars	125602
Yang, Jian / Wang, Yige / Wang, Xing-er / Hou, Xiaonan / Zhao, Chenjun / Ye, Jianqiao	Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions	125595
Wu, Weiwei / He, Xiongjun / Yang, Wenrui / Dai, Li / Wang, Yingang / He, Jia	Long-time durability of GFRP bars in the alkaline concrete environment for eight years	125573
Hong, Zhe / Yan, Kezhen / Wang, Min / You, Lingyun / Ge, Dongdong	Low-density polyethylene/ethylene–vinyl acetate compound modified asphalt: Optimal preparation process and high-temperature rheological properties	125688
Shah, Muhammad Izhar / Javed, Muhammad Faisal / Aslam, Fahid / Alabduljabbar, Hisham	Machine learning modeling integrating experimental analysis for predicting the properties of sugarcane bagasse ash concrete	125634
Nabila Bouha, Faiza / Kacimi, Larbi / De la Torre, Angeles G.	Manufacture of rich-sulfoaluminate belite cement at low temperature from waste mixture by dry and hydrothermal processes	125641
Jain, Abhishek / Chaudhary, Sandeep / Gupta, Rajesh	Mechanical and microstructural characterization of fly ash blended self-compacting concrete containing granite waste	125480
Revilla-Cuesta, Víctor / Evangelista, Luís / de Brito, Jorge / Skaf, Marta / Ortega-López, Vanesa	Mechanical performance and autogenous and drying shrinkage of MgO-based recycled aggregate high-performance concrete	125726
Zhang, Ting / Ma, Baoguo / Wu, Siyao / Jin, Zihao / Wang, Jie	Mechanical properties and hydration process of steel slag-cement binder containing nano-SiO2	125660
Wang, Shunxiang / Wang, Zhaojia / Huang, Tianyong / Wang, Peiming / Zhang, Guofang	Mechanical strengths, drying shrinkage and pore structure of cement mortars with hydroxyethyl methyl cellulose	125683
Ruan, Yunxing / Jamil, Tariq / Hu, Chuanlin / Gautam, Bishnu Prasad / Yu, Jing	Microstructure and mechanical properties of sustainable cementitious materials with ultra-high substitution level of calcined clay and limestone powder	125416
Trambitski, Yahor / Kizinievič, Olga / Kizinievič, Viktor	Modification of clay materials with retrograded starch hydrogel	125619
Fita, I. C. / Cruz, J. M. / Bouzón, N. / Borrachero, M. V. / Payá, J.	Monitoring the pozzolanic effect of fly ash in blended OPC mortars by electrical impedance spectroscopy	125632
Trigos, Laura / Escavy, José Ignacio / Gallego, Juan / Gulisano, Federico	Natural factors related to the differential heating of aggregates exposed to microwaves	125654
Chen, Tiefeng / Xu, Pengju / Gao, Xiaojian / Wang, Tingting / Qin, Ling	New sights in early carbonation of calcium silicates: Performance, mechanism and nanostructure	125622
Qian, Guoping / Zhu, Xuan / Yu, Huanan / Shi, Changyun / Yao, Ding	The oil pollution and nitric oxide photocatalytic degradation evaluation of composite nanomaterials for asphalt pavement	125497
Husein Bayqra, Sultan / Mardani-Aghabaglou, Ali / Ramyar, Kambiz	Physical and mechanical properties of high volume fly ash roller compacted concrete pavement (A laboratory and case study)	125664
Ghafari, Sepehr / Ehsani, Mehrdad / Nejad, Fereidoon Moghadas	Prediction of low-temperature fracture resistance curves of unmodified and crumb rubber modified hot mix asphalt mixtures using a machine learning approach	125332
Song, Weilong / Zhu, Zhiduo / Pu, ShaoYun / Wan, Yu / Huo, Wangwen / Peng, Yuyi	Preparation and engineering properties of alkali-activated filling grouts for shield tunnel	125620
Wu, Yanguang / Chai, Kuan / Li, Xiaogang / Cai, Lu / Bai, Tao / Zhang, Yunfei / Jiang, Can / Liu, Hui	Preparation and properties of metakaolin based porous geopolymer modified by potassium titanate whisker	125580
Fu, Liuxu / Jiao, Yubo / Chen, Xianhua	Reinforcement evaluation of different fibers on fracture resistance of asphalt mixture based on acoustic emission technique	125606
Fatemi, Saeed / Saadatjoo, Seyed Amir / Babagoli, Rezvan / Bolouri Bazaz, Jafar	Rheological evaluation of asphalt binder modified by amorphous poly alpha olefin (APAO)	125371
Rifaai, Yasser / Yahia, Ammar / Aggoun, Salima / Kadri, El-Hadj	Rheology and mechanical performance of self-consolidating hybrid-geopolymer concrete as a sustainable construction material	125633
Tramontin Souza, Marcelo / Ferreira, Igor Maia / Guzi de Moraes, Elisângela / Senff, Luciano / Arcaro, Sabrina / Castro Pessôa, José Renato / Ribeiro, Manuel J. / Novaes de Oliveira, Antonio Pedro	Role of chemical admixtures on 3D printed Portland cement: Assessing rheology and buildability	125666
Liang, Xiaoming / Ying, Kaichen / Ye, Fei / Su, Enjie / Xia, Tianhan / Han, Xingbo	Selection of backfill grouting materials and ratios for shield tunnel considering stratum suitability	125431
Alemu, Abel Shiferaw / Lee, Bang Yeon / Park, Solmoi / Kim, Hyeong-Ki	Self-healing of Portland and slag cement binder systems incorporating circulating fluidized bed combustion bottom ash	125571
Wang, Lining / Aslani, Farhad	Self-sensing performance of cementitious composites with functional fillers at macro, micro and nano scales	125679
Soltanabadi, Reza / Behfarnia, Kiachehr	Shear strength of reinforced concrete deep beams containing recycled concrete aggregate and recycled asphalt pavement	125597
Lu, Hao / Yao, Yao	Spalling mechanism of carbon nanotube concrete at elevated temperature	125594
Anik Hasan, Md. / Abul Hashem, Md. / Payel, Sofia	Stabilization of liming sludge in brick production: A way to reduce pollution in tannery	125702
Farooq, Mohammed / Banthia, Nemkumar	Strain-hardening fiber reinforced polymer concrete with a low carbon footprint	125705
Wang, Dianchao / Xiao, Jianzhuang / Duan, Zhenhua	Strategies to accelerate CO2 sequestration of cement-based materials and their application prospects	125646
Kulkarni, Prasanna P. / Mandal, J. N.	Strength evaluation of soil stabilized with nano silica- cement mixes as road construction material	125363
Adam, José M. / Betti, Michele / Clementi, Francesco / Ivorra, Salvador	Structural health monitoring and NDT of masonry structures: Research and practice	125704
Yang, Yixu / Li, Xingong	Study on compatibility of poplar wood and Portland cement	125586
Chen, Xiao / Zhang, Jiachen / Lu, Mingyu / Chen, Bowen / Gao, Shuaiqi / Bai, Jiawei / Zhang, Haoyu / Yang, Yin	Study on the effect of calcium and sulfur content on the properties of fly ash based geopolymer	125650
Teixeira, E. R. / Camões, A. / Branco, F. G.	Synergetic effect of biomass fly ash on improvement of high-volume coal fly ash concrete properties	125680
Liu, Xia / Li, Feng / Wang, Xin	Synergistic effect of acidic environmental exposure and fatigue loads on FRP tendons	125584
Tušar, Marjan / Ravnikar Turk, Mojca / Ržek, Lidija	A triangular representation of the volumetric properties of asphalt mixtures	125496
Fang, Kuizhen / Zhao, Jihui / Wang, Dongmin / Wang, Huangqi / Dong, Ziliang	Use of ladle furnace slag as supplementary cementitious material before and after modification by rapid air cooling: A comparative study of influence on the properties of blended cement paste	125434
Kamau-Devers, Kanotha / Miller, Sabbie A.	Using a micromechanical viscoelastic creep model to capture multi-phase deterioration in bio-based wood polymer composites exposed to moisture	125252
Moeini, Mohammad Amin / Hosseinpoor, Masoud / Yahia, Ammar	Yield stress of fine cement-based mortars: Challenges and potentials with rotational and compressional testing methods	125691

About this
data sheet
IssueID
60020
Published on:
30/11/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - January 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - January 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.