Construction and Building Materials - Januar 2022

Erschienen:	Januar 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Liu, Junli / Li, Shuai / Gunasekara, Chamila / Fox, Kate / Tran, Phuong	3D-printed concrete with recycled glass: Effect of glass gradation on flexural strength and microstructure	125561
Alade, Adefemi Adebisi / Naghizadeh, Zahra / Wessels, Coenraad Brand / Stolze, Hannes / Militz, Holger	Adhesion performance of melamine-urea–formaldehyde joints of copper azole-treated Eucalyptus grandis at varied bonding process conditions	125682
Liu, Chao / Zhang, Rongfei / Liu, Huawei / He, Chunhui / Wang, Youqiang / Wu, Yiwen / Liu, Shuhua / Song, Lin / Zuo, Fan	Analysis of the mechanical performance and damage mechanism for 3D printed concrete based on pore structure	125572
Fang, Ying / Zhang, Zhengqi / Zhang, Hongjiang / Li, Weiyong	Analysis of wetting behavior and its influencing factors of rejuvenator/old asphalt interface based on surface wetting theory	125674
Wu, Chenwei / Xue, Jianyang / Song, Dejun / Liang, Xuanwen	Analysis on the mechanical performance of Dougong bracket sets under eccentric vertical load	125652
Cheng, Yingyao / Chan, Andrew H. C. / Holloway, Damien / Nolan, Gregory	Anisotropic material behaviour under compression of Eucalyptus nitens with high moisture content	124788
Kosiachevskyi, D. / Abahri, K. / Daubresse, A. / Prat, E. / Chaouche, M.	Assessment of the hygrothermal, microstructural and chemical evolution of a hemp-based cementitious mortar under ETICS total weathering aging protocol	125471
Nguyen, Quang Dieu / Afroz, Sumaiya / Zhang, Yingda / Kim, Taehwan / Li, Wengui / Castel, Arnaud	Autogenous and total shrinkage of limestone calcined clay cement (LC3) concretes	125720
Pei, Chun / Wei, Liangliang / Qin, Zhaojun / Yu, Hongtao / Zhu, Ji-Hua / Xing, Feng	Behavior and design of nano/micro-scale carbon modified multifunctional cementitious composites	125506
Zhao, Nan / Wang, Sheliang / Quan, Xiaoyi / Liu, Kangning / Xu, Jin / Xu, Fan	Behavior of fiber reinforced cementitious composites under the coupled attack of sulfate and dry/wet in a tidal environment	125673
Wu, Liwei / Guo, Xueyuan / Chen, Haibin / Liu, Junyang / Su, Youpo	Calculation method for the axial load-bearing capacity of steel pipe-to-sleeve grouted connections	125621
Song, Chen / Jiang, Chao / Gu, Xiang-Lin / Zhang, Qiang / Zhang, Wei-Ping	Calibration analysis of chloride binding capacity for cement-based materials under various exposure conditions	125588
Rahou, Jihad / Rezqi, Halima / El Ouahabi, Meriam / Fagel, Nathalie	Characterization of Moroccan steel slag waste: The potential green resource for ceramic production	125663
Ben, Xunqin / Jiang, Linhua / Guo, Ming-Zhi / Meng, Yuanyuan / Chen, Lei / Jin, Weizhun / Wang, Fei	Chloride erosion resistance of calcium formate incorporated cement mortar under chloride attack	125611
Tang, Jin / Wang, Hao	Coarse grained modeling of nanostructure and asphaltene aggregation in asphalt binder using dissipative particle dynamics	125605
Lal, Hiran Mayookh / Uthaman, Arya / Li, Chenggao / Xian, Guijun / Thomas, Sabu	Combined effects of cyclic/sustained bending loading and water immersion on the interface shear strength of carbon/glass fiber reinforced polymer hybrid rods for bridge cable	125587
Przybyłowicz, Michał / Sysyn, Mykola / Gerber, Ulf / Kovalchuk, Vitalii / Fischer, Szabolcs	Comparison of the effects and efficiency of vertical and side tamping methods for ballasted railway tracks	125708
El Moustapha, Bouha / Bonnet, Stéphanie / Khelidj, Abdelhafid / Leklou, Nordine / Froelich, Daniel / Babah, Isselmou Ahmedou / Charbuillet, Carole / Khalifa, Abderahmane	Compensation of the negative effects of micro-encapsulated phase change materials by incorporating metakaolin in geopolymers based on blast furnace slag	125556
Alajarmeh, Omar / Manalo, Allan / Benmokrane, Brahim / Schubel, Peter / Zeng, Xuesen / Ahmad, Afaq / Hassanli, Reza / Sorbello, Charles-Dean	Compression behavior of GFRP bars under elevated In-Service temperatures	125675
Wei, Yang / Xu, Pengfei / Zhang, Yirui / Wang, Gaofei / Zheng, Kaiqi	Compressive behaviour of FRP-steel wire mesh composite tubes filled with seawater and sea sand concrete	125608
Xu, Wenqiang / Li, Yu / Li, Hanzhang / Wang, Kang / Zhang, Chengpeng / Jiang, Yibo / Qiang, Sheng	Corrosion mechanism and damage characteristic of steel fiber concrete under the effect of stray current and salt solution	125618
Liu, Chen-Xu / Yu, Gui-Lan	Deep learning-based topology design of periodic barrier for full-mode waves	125579
Lochan, Philip Prakash / Polak, Maria Anna	Determination of tensile strength of GFRP bars using flexure tests	125630
Wang, Shujuan / Zhang, Tao / Zhang, Xiaolin / Ge, Shengbo / Fan, Wei	Development of 3D needled composite from denim waste and polypropylene fibers for structural applications	125583
Luo, Haisong / Zheng, Chuanfeng / Yang, Xue / Bao, Chonghao / Liu, Wenyue / Lin, Zhi	Development of technology to accelerate SBS-modified asphalts swelling in dry modification mode	125703
Huang, Yuantian / Tan, Jianli / Xuan, Xiaoxin / Wei, Shiju / Liu, Leping / Yu, Shujuan / Zheng, Guangjian	Durability of plant fiber reinforced alkali activated composites	125501
Azil, Athmane / Le Guern, Malo / Touati, Karim / Sebaibi, Nassim / Boutouil, Mohamed / Streiff, François / Goodhew, Steve / Gomina, Moussa	Earth construction: Field variabilities and laboratory reproducibility	125591
Singh, Sumit K. / Pandey, Akanksha / Ravindranath, Sham S.	Effect of additives on the thermal stability of SBS modified binders during storage at elevated temperatures	125609
Liu, Yifan / Yao, Ziyin / Wang, Feibin / Huang, Hui / Que, Zeli	Effect of arrangement distances on stiffness of shear-tension mode in timber-to-timber connections with inclined screws	125592
Zhang, Longguan / Liang, Zhenzhen / Li, Shengli	Effect of current density on the cathodic protection efficiency and mechanical properties of pre-stressed high-strength steel wires for stay cable	125671
Camargo, Ingrid / Hofko, Bernhard / Mirwald, Johannes	Effect of DLTDP and furfural on asphalt binders: Optimal dosage and PG grading	125489
Liu, Miao / Cai, Lixiong / Luo, Hanbin	Effect of nano-silica on microbiologically induced calcium carbonate precipitation	125661
Zhao, Yazhou / Zhu, Zhenyu / Chen, Yang / Li, Shagang / Zhao, Yue / Li, Xiaoyu / Wu, Min / Chen, Da	Effect of TEA·H3PO4 and TEA·C18H30O3S on the mechanical properties and hydration characteristics of cement paste	125635
Cheng, Long / Zhang, Lei / Lei, Yuechao / Ma, Yang / Yan, Chuanqi	Effect of the laboratory short-term aging temperature on the chemical and rheological characteristics of high modulus asphalts	125569
Abdelrazik, Ahmed / Khayat, Kamal H.	Effect of type and content of expansive agent on performance of fiber-reinforced concrete with adapted rheology	125610
Yu, Lei / Liu, Chunhui / Mei, Hua / Xia, Yu / Liu, Zhen / Xu, Feng / Zhou, Cuiying	Effects of aggregate and interface characteristics on chloride diffusion in concrete based on 3D random aggregate model	125690
Xu, Jie / Kong, Chengwei / Xu, Tao	Effects of deposition states and distribution regularity of clogging substances on pore clogging behaviors of double-layer drainage asphalt pavement	125701
Luan, Congqi / Zhou, Yong / Liu, Yongyi / Ren, Zunchao / Wang, Jinbang / Yuan, Lianwang / Du, Shuang / Zhou, Zonghui / Huang, Yongbo	Effects of nano-SiO2, nano-CaCO3 and nano-TiO2 on properties and microstructure of the high content calcium silicate phase cement (HCSC)	125377
Lyratzakis, Alexandros / Tsompanakis, Yiannis / Psarropoulos, Prodromos N.	Efficient mitigation of high-speed train vibrations on adjacent reinforced concrete buildings	125653
Abubakri, Shahriar / Mangat, P. S. / Starinieri, Vincenzo / Lomboy, Gilson R.	Electric curing parameters of mortar and its mechanical properties in cold weather	125615
Haider, Muhammad Zeeshan / Jin, Xinghan / Sharma, Raju / Pei, Junjie / Hu, Jong Wan	Enhancing the compressive strength of thermal energy storage concrete containing a low-temperature phase change material using silica fume and multiwalled carbon nanotubes	125659
Klima, K. M. / Schollbach, K. / Brouwers, H. J. H. / Yu, Qingliang	Enhancing the thermal performance of Class F fly ash-based geopolymer by sodalite	125574
Han, Li-Jun / Li, Jiang-Shan / Xue, Qiang / Guo, Ming-Zhi / Wang, Ping / Poon, Chi Sun	Enzymatically induced phosphate precipitation (EIPP) for stabilization/solidification (S/S) treatment of heavy metal tailings	125577
Liu, Qi / Liu, Jinzhou / Yu, Bin / Zhang, Jiupeng / Pei, Jianzhong	Evaluation and optimization of asphalt binder and mixture modified with high activated crumb rubber content	125676
Tan, Kanghao / Qin, Yinghong / Wang, Junsong	Evaluation of the properties and carbon sequestration potential of biochar-modified pervious concrete	125648
Abdi-Goudarzi, S. / Ziaie-Moayed, R. / Nazeri, A.	An experimental evaluation of geocomposite-reinforced soil sections	125566
Akhtar, Tauqeer / Ali, Babar / Kahla, Nabil Ben / Kurda, Rawaz / Rizwan, Muhammad / Mohsin Javed, Mohammad / Raza, Ali	Experimental investigation of eco-friendly high strength fiber-reinforced concrete developed with combined incorporation of tyre-steel fiber and fly ash	125626
Feng, Qian / Wei, Peng / Zhao, Kexuan / Xu, Rongqiao	Experimental investigation of stirrup confinement effects on bond-slip responses for corner and middle bars	125629
Xue, Congcong / Yu, Min / Xu, Haoming / Xu, Lihua / Saafi, Mohamed / Ye, Jianqiao	Experimental study on thermal performance of ultra-high performance concrete with coarse aggregates at high temperature	125585
Li, Anbang / Xu, Shanhua / Wang, Youde / Wu, Cheng / Nie, Biao	Fatigue behavior of corroded steel plates strengthened with CFRP plates	125707
Saed, Seyed Ataollah / Karimi, Hamid Reza / Rad, Sina Mousavi / Aliha, M. R. M. / Shi, Xijun / Haghighatpour, Pegah Jafari	Full range I/II fracture behavior of asphalt mixtures containing RAP and rejuvenating agent using two different 3-point bend type configurations	125590
Mohamed, Rosnita / Abd Razak, Rafiza / Abdullah, Mohd Mustafa Al Bakri / Abd Rahim, Shayfull Zamree Abd / Yuan-Li, Long / Sandu, Andrei Victor / Wysłocki, Jerzy J.	Heat evolution of alkali-activated materials: A review on influence factors	125651
Wu, Chun-Ran / Zhan, Bao-Jian / Hong, Zhi-Qiang / Cui, Shi-Cai / Cui, Peng / Kou, Shi-Cong	Hydration behavior of circulating fluidized bed fly ash (CFBFA) as a cementitious binder	125625
Naran, Jake M. / Gonzalez, Rosa Eva Gonzalez / del Rey Castillo, Enrique / Toma, Charlotte Louise / Almesfer, Nasser / van Vreden, Pieter / Saggi, Opinder	Incorporating waste to develop environmentally-friendly concrete mixes	125599
Liu, Yuantao / Chen, Bing / Dong, Biqin / Wang, Yanshuai / Xing, Feng	Influence mechanisms of fly ash in magnesium ammonium phosphate cement	125581
Constancio Trindade, Ana Carolina / Liebscher, Marco / Curosu, Iurie / de Andrade Silva, Flávio / Mechtcherine, Viktor	Influence of elevated temperatures on the residual and quasi in-situ flexural strength of strain-hardening geopolymer composites (SHGC) reinforced with PVA and PE fibers	125649
de França, Marylinda Santos / Cazacliu, Bogdan / Kränkel, Thomas / Savastano Jr., Holmer	Influence of measuring system on rheological behavior of PVA-fiber reinforced mortars	125613
Karimipour, Arash	Influence of micro polypropylene fibres on the fracture energy and mechanical characteristics of recycled coarse brick aggregate concrete	125667
Cruz, Gabryelle Keith Avelino / de Medeiros Melo Neto, Osires / Arruda, Sonaly Mendes / de Figueirêdo Lopes Lucena, Lêda Christiane / Ziegler, Christian Rafael / da Silva, Gustavo Correia Basto	Influence of particle size selection methods on asphalt mixtures produced with lateritic aggregates	125201
Chen, Chen / Gu, Fan / Heitzman, Michael / Powell, Buzz / Kowalski, Karol	Influences of alternative friction aggregates on texture and friction characteristics of high friction surface treatment	125643
Zhang, Ran / Wang, Haoxiang / Ji, Jie / Suo, Zhi / Ou, Ziheng	Influences of different modification methods on surface activation of waste tire rubber powder applied in cement-based materials	125191
Xu, Tiangui / Wang, Yuzhuo / Liang, Chen	The interfacial bond-slip behavior of I-section steel and reactive powder concrete at high temperatures	125656
Ma, Xiang / Zhou, Peisheng / Wang, Lili / Jiang, Jiwang / Wang, Jiaqing	Internal structure change of porous asphalt concrete under coupled conditions of load, moisture and temperature	125603
Jiao, Liya / Elkashef, Mohamed / Harvey, John T. / Rahman, Mohammad Ashiqur / Jones, David	Investigation of fatigue performance of asphalt mixtures and FAM mixes with high recycled asphalt material contents	125607
Kamani, Mojtaba / Ajalloeian, Rassoul	Investigation of the changes in aggregate morphology during different aggregate abrasion/degradation tests using image analysis	125614
Karim, Ali Naman / Johansson, Pär / Sasic Kalagasidis, Angela	Knowledge gaps regarding the hygrothermal and long-term performance of aerogel-based coating mortars	125602
Yang, Jian / Wang, Yige / Wang, Xing-er / Hou, Xiaonan / Zhao, Chenjun / Ye, Jianqiao	Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions	125595
Wu, Weiwei / He, Xiongjun / Yang, Wenrui / Dai, Li / Wang, Yingang / He, Jia	Long-time durability of GFRP bars in the alkaline concrete environment for eight years	125573
Hong, Zhe / Yan, Kezhen / Wang, Min / You, Lingyun / Ge, Dongdong	Low-density polyethylene/ethylene–vinyl acetate compound modified asphalt: Optimal preparation process and high-temperature rheological properties	125688
Shah, Muhammad Izhar / Javed, Muhammad Faisal / Aslam, Fahid / Alabduljabbar, Hisham	Machine learning modeling integrating experimental analysis for predicting the properties of sugarcane bagasse ash concrete	125634
Nabila Bouha, Faiza / Kacimi, Larbi / De la Torre, Angeles G.	Manufacture of rich-sulfoaluminate belite cement at low temperature from waste mixture by dry and hydrothermal processes	125641
Jain, Abhishek / Chaudhary, Sandeep / Gupta, Rajesh	Mechanical and microstructural characterization of fly ash blended self-compacting concrete containing granite waste	125480
Revilla-Cuesta, Víctor / Evangelista, Luís / de Brito, Jorge / Skaf, Marta / Ortega-López, Vanesa	Mechanical performance and autogenous and drying shrinkage of MgO-based recycled aggregate high-performance concrete	125726
Zhang, Ting / Ma, Baoguo / Wu, Siyao / Jin, Zihao / Wang, Jie	Mechanical properties and hydration process of steel slag-cement binder containing nano-SiO2	125660
Wang, Shunxiang / Wang, Zhaojia / Huang, Tianyong / Wang, Peiming / Zhang, Guofang	Mechanical strengths, drying shrinkage and pore structure of cement mortars with hydroxyethyl methyl cellulose	125683
Ruan, Yunxing / Jamil, Tariq / Hu, Chuanlin / Gautam, Bishnu Prasad / Yu, Jing	Microstructure and mechanical properties of sustainable cementitious materials with ultra-high substitution level of calcined clay and limestone powder	125416
Trambitski, Yahor / Kizinievič, Olga / Kizinievič, Viktor	Modification of clay materials with retrograded starch hydrogel	125619
Fita, I. C. / Cruz, J. M. / Bouzón, N. / Borrachero, M. V. / Payá, J.	Monitoring the pozzolanic effect of fly ash in blended OPC mortars by electrical impedance spectroscopy	125632
Trigos, Laura / Escavy, José Ignacio / Gallego, Juan / Gulisano, Federico	Natural factors related to the differential heating of aggregates exposed to microwaves	125654
Chen, Tiefeng / Xu, Pengju / Gao, Xiaojian / Wang, Tingting / Qin, Ling	New sights in early carbonation of calcium silicates: Performance, mechanism and nanostructure	125622
Qian, Guoping / Zhu, Xuan / Yu, Huanan / Shi, Changyun / Yao, Ding	The oil pollution and nitric oxide photocatalytic degradation evaluation of composite nanomaterials for asphalt pavement	125497
Husein Bayqra, Sultan / Mardani-Aghabaglou, Ali / Ramyar, Kambiz	Physical and mechanical properties of high volume fly ash roller compacted concrete pavement (A laboratory and case study)	125664
Ghafari, Sepehr / Ehsani, Mehrdad / Nejad, Fereidoon Moghadas	Prediction of low-temperature fracture resistance curves of unmodified and crumb rubber modified hot mix asphalt mixtures using a machine learning approach	125332
Song, Weilong / Zhu, Zhiduo / Pu, ShaoYun / Wan, Yu / Huo, Wangwen / Peng, Yuyi	Preparation and engineering properties of alkali-activated filling grouts for shield tunnel	125620
Wu, Yanguang / Chai, Kuan / Li, Xiaogang / Cai, Lu / Bai, Tao / Zhang, Yunfei / Jiang, Can / Liu, Hui	Preparation and properties of metakaolin based porous geopolymer modified by potassium titanate whisker	125580
Fu, Liuxu / Jiao, Yubo / Chen, Xianhua	Reinforcement evaluation of different fibers on fracture resistance of asphalt mixture based on acoustic emission technique	125606
Fatemi, Saeed / Saadatjoo, Seyed Amir / Babagoli, Rezvan / Bolouri Bazaz, Jafar	Rheological evaluation of asphalt binder modified by amorphous poly alpha olefin (APAO)	125371
Rifaai, Yasser / Yahia, Ammar / Aggoun, Salima / Kadri, El-Hadj	Rheology and mechanical performance of self-consolidating hybrid-geopolymer concrete as a sustainable construction material	125633
Tramontin Souza, Marcelo / Ferreira, Igor Maia / Guzi de Moraes, Elisângela / Senff, Luciano / Arcaro, Sabrina / Castro Pessôa, José Renato / Ribeiro, Manuel J. / Novaes de Oliveira, Antonio Pedro	Role of chemical admixtures on 3D printed Portland cement: Assessing rheology and buildability	125666
Liang, Xiaoming / Ying, Kaichen / Ye, Fei / Su, Enjie / Xia, Tianhan / Han, Xingbo	Selection of backfill grouting materials and ratios for shield tunnel considering stratum suitability	125431
Alemu, Abel Shiferaw / Lee, Bang Yeon / Park, Solmoi / Kim, Hyeong-Ki	Self-healing of Portland and slag cement binder systems incorporating circulating fluidized bed combustion bottom ash	125571
Wang, Lining / Aslani, Farhad	Self-sensing performance of cementitious composites with functional fillers at macro, micro and nano scales	125679
Soltanabadi, Reza / Behfarnia, Kiachehr	Shear strength of reinforced concrete deep beams containing recycled concrete aggregate and recycled asphalt pavement	125597
Lu, Hao / Yao, Yao	Spalling mechanism of carbon nanotube concrete at elevated temperature	125594
Anik Hasan, Md. / Abul Hashem, Md. / Payel, Sofia	Stabilization of liming sludge in brick production: A way to reduce pollution in tannery	125702
Farooq, Mohammed / Banthia, Nemkumar	Strain-hardening fiber reinforced polymer concrete with a low carbon footprint	125705
Wang, Dianchao / Xiao, Jianzhuang / Duan, Zhenhua	Strategies to accelerate CO2 sequestration of cement-based materials and their application prospects	125646
Kulkarni, Prasanna P. / Mandal, J. N.	Strength evaluation of soil stabilized with nano silica- cement mixes as road construction material	125363
Adam, José M. / Betti, Michele / Clementi, Francesco / Ivorra, Salvador	Structural health monitoring and NDT of masonry structures: Research and practice	125704
Yang, Yixu / Li, Xingong	Study on compatibility of poplar wood and Portland cement	125586
Chen, Xiao / Zhang, Jiachen / Lu, Mingyu / Chen, Bowen / Gao, Shuaiqi / Bai, Jiawei / Zhang, Haoyu / Yang, Yin	Study on the effect of calcium and sulfur content on the properties of fly ash based geopolymer	125650
Teixeira, E. R. / Camões, A. / Branco, F. G.	Synergetic effect of biomass fly ash on improvement of high-volume coal fly ash concrete properties	125680
Liu, Xia / Li, Feng / Wang, Xin	Synergistic effect of acidic environmental exposure and fatigue loads on FRP tendons	125584
Tušar, Marjan / Ravnikar Turk, Mojca / Ržek, Lidija	A triangular representation of the volumetric properties of asphalt mixtures	125496
Fang, Kuizhen / Zhao, Jihui / Wang, Dongmin / Wang, Huangqi / Dong, Ziliang	Use of ladle furnace slag as supplementary cementitious material before and after modification by rapid air cooling: A comparative study of influence on the properties of blended cement paste	125434
Kamau-Devers, Kanotha / Miller, Sabbie A.	Using a micromechanical viscoelastic creep model to capture multi-phase deterioration in bio-based wood polymer composites exposed to moisture	125252
Moeini, Mohammad Amin / Hosseinpoor, Masoud / Yahia, Ammar	Yield stress of fine cement-based mortars: Challenges and potentials with rotational and compressional testing methods	125691

Über diese
Datenseite
IssueID
60020
Veröffentlicht am:
30.11.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Januar 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Januar 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.