Construction and Building Materials - January 2022

Published:	January 2022

Articles in this Issue

Author(s)	Title	Page(s)
Ghanbari-Ghazijahani, Tohid / Kasebahadi, Mohammad / Hassanli, Reza / Classen, Martin	3D printed honeycomb cellular beams made of composite materials (plastic and timber)	125541
Zhang, Jianwei / Tao, Xinyi / Li, Xiangyu / Zhang, Yunyi / Liu, Yujun	Analytical and experimental investigation of the bond behavior of confined high-strength recycled aggregate concrete	125636
Wang, Gaofei / Wei, Yang / Miao, Kunting / Zheng, Kaiqi / Dong, Fenghui	Axial compressive behavior of seawater sea-sand coral aggregate concrete-filled circular FRP-steel composite tube columns	125737
Guo, Yong-Chang / Xiao, Shu-Hua / Zeng, Jun-Jie / Su, Jia-Ying / Li, Tian-Zi / Xie, Zhi-hong	Behavior of concrete-filled FRP tube columns internally reinforced with FRP-steel composite bars under axial compression	125714
Zhang, Wenxue / Lu, Xiangtao / Fang, Rong / Zhao, Xu	Calculation model including time-varying coefficients for calculating the lateral pressure of bottom-up pumping self-compacting concrete	125672
Ramezani, Mahyar / Dehghani, Ayoub / Sherif, Muhammad M.	Carbon nanotube reinforced cementitious composites: A comprehensive review	125100
Qian, Kuangliang / Song, Yufeng / Lai, Junying / Qian, Xiaoqian / Zhang, Zhe / Liang, Yong / Ruan, Shaoqin	Characterization of historical mortar from ancient city walls of Xindeng in Fuyang, China	125780
Wang, Chuan / Li, Zhaofeng / Zhou, Zhihao / Gao, Yifan / Zhang, Jian	Compatibility of different fibres with red mud-based geopolymer grouts	125742
Khan, Mohammad Iqbal / Fares, Galal / Abbas, Yassir M.	Cost-performance balance and new image analysis technique for ultra-high performance hybrid nano-based fiber-reinforced concrete	125753
Jeong, Jaehoon / Underwood, B. Shane / Kim, Y. Richard	Cracking performance predictions using index-volumetrics relationships with direct tension cyclic fatigue test and Illinois Flexibility Index Test (I-FIT)	125631
Dash, Swayam Siddha / Chandrappa, Anush K. / Sahoo, Umesh Chandra	Design and performance of cold mix asphalt – A review	125687
Zhang, Jun / Bao, Liangliang	Determination of asphalt mixture’s viscoelastic constitutive parameters for pavement response analysis using dynamic modulus transformation	125729
Sánchez Díaz, Eric Enrique / Escobar Barrios, Vladimir A.	Development and use of geopolymers for energy conversion: An overview	125774
Tsaousi, Georgia-Maria / Sakkas, Konstantinos-Miltiadis / Panias, Dimitrios	Development of advanced materials from industrial waste, with high thermal performance	125779
Wang, Sijia / Guo, Xiaolu / Guo, Zhenwen / He, Changxuan / Duan, Xinzhi / Hu, Wenpei / Zhuang, Kailin	Direct characterization of steel fibre corrosion in pre-cracked ultra-high performance concrete (UHPC) with different crack widths	125769
Feng, Baozhu / Wang, Haoyu / Li, Song / Ji, Kuo / Li, Liding / Xiong, Rui	The durability of asphalt mixture with the action of salt erosion: A review	125749
Velardo, P. / Sáez del Bosque, I. F. / Sánchez de Rojas, M. I. / De Belie, N. / Medina, C.	Durability of concrete bearing polymer-treated mixed recycled aggregate	125781
Uwizeyimana, Placide / Perrin, Marianne / Laügt, Emmanuel / Eyma, Florent	Durability study of glulam timber under cyclic moisture loading	125715
Akça, Kutalmış Recep / Ipek, Metin	Effect of different fiber combinations and optimisation of an ultra-high performance concrete (UHPC) mix applicable in structural elements	125777
Xue, Jiangwei / Liu, Songhui / Ma, Xiaoe / Teng, Yibiao / Guan, Xuemao	Effect of different gypsum dosage on the chloride binding properties of C4AF hydrated paste	125562
Ma, Lei / Zhang, Qing / Jia, Zijian / Liu, Chao / Deng, Zhicong / Zhang, Yamei	Effect of drying environment on mechanical properties, internal RH and pore structure of 3D printed concrete	125731
Sun, Jianing / Kong, Kian Hau / Lye, Chao Qun / Quek, Ser Tong	Effect of ground granulated blast furnace slag on cement hydration and autogenous healing of concrete	125365
Cao, Feng / Qiao, Hongxia / Li, Yuanke / Shu, Xiuyuan / Cui, Lijun	Effect of highland barley straw ash admixture on properties and microstructure of concrete	125802
Alfaqawi, Rami M. / Fareed, Ayyaz / Bilal Ahmed Zaidi, Syed / Airey, Gordon D. / Rahim, Abdur	Effect of hydrated lime and other mineral fillers on stiffening and oxidative ageing in bitumen mastic	125789
Teng, Yibiao / Liu, Songhui / Zhang, Zhaocai / Xue, Jiangwei / Guan, Xuemao	Effect of triethanolamine on the chloride binding capacity of cement paste with a high volume of fly ash	125612
Abduljabbar, Nadia / Al-Busaltan, Shakir / Dulaimi, Anmar / Al-Yasari, Rand / Sadique, Monower / Nageim, Hassan Al	The effect of waste low-density polyethylene on the mechanical properties of thin asphalt overlay	125722
Kumar, Nitin / Barbato, Michele	Effects of sugarcane bagasse fibers on the properties of compressed and stabilized earth blocks	125552
Wang, Mingzhi / Yang, Xu / Wang, Wei	Establishing a 3D aggregates database from X-ray CT scans of bulk concrete	125740
Thakur, Ankush / Senthil, Kasilingam / Singh, Amrit Pal	Evaluation of concrete bricks with crumb rubber and polypropylene fibres under impact loading	125752
Trabacchin, Giulia / Sebastian, Wendel / Zhang, Mingzhong	Experimental and analytical study of bond between basalt FRP bars and geopolymer concrete	125461
Zhang, Zhiqiang / Zhu, Xingyu / Zhang, Yanyang / Gong, Ruikai	Experimental and numerical investigation on flexural and fracture performance of steel fiber reinforced shotcrete	125645
Basser, Hamed / Moradi Shaghaghi, Taleb / Afshin, Hasan / Saleh Ahari, Reza / Mirrezaei, Seyed Saeed	An experimental investigation and response surface methodology-based modeling for predicting and optimizing the rheological and mechanical properties of self-compacting concrete containing steel fiber and PET	125370
Zou, Jinhua / Du, Tengfu / Chen, Wei / Fang, Chengfeng / Zhang, Shijian / Zou, Chao / Huang, Longtian / Chen, Haibin	Experimental study of concrete floating slab municipal road with steel spring isolators under vehicle loads	125686
Qiu, Huafu / Zhang, Fushun / Liu, Lang / Huan, Chao / Hou, Dongzhuang / Kang, Wei	Experimental study on acoustic emission characteristics of cemented rock-tailings backfill	125278
Chen, Lihua / Zhou, Lujie / Wang, Chenggang / Dong, Lijuan	Experimental study on bond-slip constitutive relationship between checkered c-shaped encased steel plate and concrete	125059
Chen, Xinyi / Li, Jinxing / Essawy, Hisham / Pizzi, Antonio / Fredon, Emmanuel / Gerardin, Christine / Du, Guanben / Zhou, Xiaojian	Flame-retardant and thermally-insulating tannin and soybean protein isolate (SPI) based foams for potential applications in building materials	125711
Meskini, Sarra / Remmal, Toufik / Ejjaouani, Houssine / Samdi, Azzedine	Formulation and optimization of a phosphogypsum – fly ash – lime composite for road construction: A statistical mixture design approach	125786
Minafò, Giovanni / Oddo, Maria Concetta / La Mendola, Lidia	Formulation of a truss element for modelling the tensile response of FRCM strips	125576
Zhang, Yanrong / Zhang, Xuesong / Cai, Xiaopei / Gao, Liang / Li, Qiangqiang / Kong, Xiangming	A further understanding on the strength development of cement pastes in the presence of triisopropanolamine used in CRTS III slab track	125743
Wu, Haiying / Lei, Honggang / Chen, Y. Frank	Grey relational analysis of static tensile properties of structural steel subjected to urban industrial atmospheric corrosion and accelerated corrosion	125706
Guo, Rui / Xian, Guijun / Li, Feng / Li, Chenggao / Hong, Bin	Hygrothermal resistance of pultruded carbon, glass and carbon/glass hybrid fiber reinforced epoxy composites	125710
Ali Emadi, Amir / Modarres, Amir	The impact of water to cement ratio on the fracture behavior of rubberized concrete	125754
Adeleke, Blessing Oluwaseun / Kinuthia, John M. / Oti, Jonathan E.	Impacts of MgO waste:GGBS formulations on the performance of a stabilised natural high sulphate bearing soil	125745
Jiang, Yi / Shen, Peiliang / Poon, Chi Sun	Improving the bonding capacity of recycled concrete aggregate by creating a reactive shell with aqueous carbonation	125733
Kong, Xiao / Dai, Li / Wang, Yitan / Qiao, Dehao / Hou, Shaodan / Wang, Shaojie	Influence of kenaf stalk on printability and performance of 3D printed industrial tailings based geopolymer	125787
Fang, Xin / Wang, Chao / Li, Heng / Wang, Xiaohua / Zhang, Sherong / Luo, Xiaochun / Jia, He	Influence of mesoscopic pore characteristics on the splitting-tensile strength of cellular concrete through deep-learning based image segmentation	125335
Nedeljković, Marija / Mylonas, Akis / Wiktor, Virginie / Schlangen, Erik / Visser, Jeanette	Influence of sand drying and mixing sequence on the performance of mortars with fine recycled concrete aggregates	125750
Gao, Zhen / Zhang, Peng / Wang, Juan / Wang, Kexun / Zhang, Tianhang	Interfacial properties of geopolymer mortar and concrete substrate: Effect of polyvinyl alcohol fiber and nano-SiO2 contents	125735
Yang, Huifang / Dong, Ruikun	Investigating the properties of rejuvenated asphalt with the modified rejuvenator prepared by waste cooking oil and waste tire crumb rubber	125692
Liu, Jian / Peng, Yun / Xu, Shenchun / Yuan, Pengcheng / Qu, Kefo / Yu, Xiao / Hu, Feng / Zhang, Wei / Su, Yu	Investigation of geopolymer-based ultra-high performance concrete slabs against contact explosions	125727
Li, Heng / Xu, Fang / Li, Bin / Sun, Tao / Huang, Xiaoming / Zhu, Jing / Peng, Chao / Lin, Juntao / Chen, Zongwu	Investigation on mechanical properties of excess-sulfate phosphogypsum slag cement: From experiments to molecular dynamics simulation	125685
Zhao, Xiaorui / Sheng, Yanping / Lv, Hongli / Jia, Haichuan / Liu, Qinlong / Ji, Xin / Xiong, Rui / Meng, Jiandang	Laboratory investigation on road performances of asphalt mixtures using steel slag and granite as aggregate	125655
Zhou, Xinxing / Zhang, Xiaorui / Zhang, Yuan / Adhikari, Sanjeev	Life cycle assessment of asphalt and cement pavements: Comparative cases in Shanxi Province	125738
Lakhiar, Muhammad Tahir / Bai, Yu / Wong, Leong Sing / Chandra Paul, Suvash / Anggraini, Vivi / Kong, Sih Ying	Mechanical and durability properties of epoxy mortar incorporating coal bottom ash as filler	125677
Kadhim, Sarah / Cevik, Abdulkadir / Niş, Anıl / Bakbak, Derya / Aljanabi, Maysam	Mechanical behavior of fiber reinforced slag-based geopolymer mortars incorporating artificial lightweight aggregate exposed to elevated temperatures	125766
Ling, Senlin / Hu, Mingjun / Sun, Daquan / Ni, Hangtian / Xu, Lei	Mechanical properties of pouring semi-flexible pavement material and engineering estimation on contribution of each phase	125782
Liu, Xin / Qian, Xiaoxu / Pu, Shikun / Sheng, Ke / Sun, Dongning / Hong, Baoning	Methods for testing the quality of lightweight cellular concrete during pouring	125755
Chen, Keyu / Wu, Dazhi / Zhang, Zilong / Pan, Chonggen / Shen, Xinyuan / Xia, Linling / Zang, Jiawei	Modeling and optimization of fly ash–slag-based geopolymer using response surface method and its application in soft soil stabilization	125723
Lv, Nao / Wang, Haibo / Rong, Kai / Chen, Zhanyang / Zong, Qi	The numerical simulation of large diameter split Hopkinson pressure bar and Hopkinson bundle bar of concrete based on mesoscopic model	125728
Chen, Xiao / Zhang, Jiachen / Guo, Wenbin / Zhou, Mingkai / Zhao, Qinglin / Li, Beixing	Occurrence and migration laws of water in circulating fluidized bed bottom slag mortar and their influences on mortar properties	125748
Yin, Yuanyuan / Han, Sen / Kong, Haiyu / Han, Xiao / Guo, Han	Optimization and performance evaluation of waterborne epoxy resin modified emulsified asphalt micro-surfacing based on tunnel driving environment	125604
Gleaton, Jason / Lai, Zhengshou / Xiao, Rui / Zhang, Ke / Chen, Qiushi / Zheng, Yi	Optimization of mechanical strength of biocemented Martian regolith simulant soil columns	125741
Binti Joohari, Ilya / Giustozzi, Filippo	Oscillatory shear rheometry of hybrid polymer-modified bitumen using multiple stress creep and recovery and linear amplitude sweep tests	125791
Yao, Tengfei / Han, Sen / Gong, Xin / Zhang, Jianchao / Chang, Xiaojuan / Zhang, Zhuang	Performance evaluation of a polyurethane-urea binder for asphalt pavement groove-filling	125734
Strieder, Helena Lunkes / Dutra, Vanessa Fátima Pasa / Graeff, Angela Gaio / Núñez, Washington Peres / Merten, Felipe Raul Meert	Performance evaluation of pervious concrete pavements with recycled concrete aggregate	125384
Li, Mingqi / Chen, Huisu / Liu, Lin / Lin, Jianjun / Ullah, Karim	Permeability of concrete considering the synergetic effect of crack’s shape- and size-polydispersities on the percolation	125684
Xu, Liangliang / Duan, Yu / Li, Yulong	Porosity, gradient and impact velocity effects on compressive response of foamed concrete	125616
Zahedi, Farshad / Dehestani, Mehdi	Post-fire optimum mechanical properties of self-compacting mortar using Taguchi method and analysis of variance	125642
He, Ziming / Shen, Aiqin / Wu, Hansong / Wang, Wenzhen / Wang, Lusheng / Guo, Yinchuan	Properties and mechanisms of brick-concrete recycled aggregate strengthened by compound modification treatment	125678
Ban Cheah, Chee / Liew, Jia Jia / Khaw Le Ping, Kevin / Siddique, Rafat / Tangchirapat, Weerachart	Properties of ternary blended cement containing ground granulated blast furnace slag and ground coal bottom ash	125249
Okuyucu, Osman / Jayawickrama, Priyantha / Senadheera, Sanjaya	The relationship between curing regime and mechanical properties of controlled low-strength material	125460
Caniato, M. / Gasparella, A. / Bettarello, F. / Santoni, A. / Fausti, P. / Granzotto, N. / Bécot, F. X. / Chevillotte, F. / Jaouen, L. / Borello, G. / Robin, O. / Atalla, N.	A reliability study concerning the acoustic simulations of timber elements for buildings	125765
Dai, Jinpeng / Wang, Qicai / Bi, Ruixiao / Wang, Chong / Han, Zhuowei / Du, Wentao / Chen, Ziyu	Research on influencing factors and time-varying model of thermal conductivity of concrete at early age	125638
Duan, Yun / Wang, Qicai / Yang, Zijiang / Cui, Xiaoning / Liu, Fei / Chen, Hai	Research on the effect of steam curing temperature and duration on the strength of manufactured sand concrete and strength estimation model considering thermal damage	125531
Shi, Xiaoshuang / Zhang, Cong / Wang, Xiaoqi / Zhang, Tao / Wang, Qingyuan	Response surface methodology for multi-objective optimization of fly ash-GGBS based geopolymer mortar	125644
Ma, Xiaomeng / Pan, Jinlong / Cai, Jingming / Zhang, Zhuoyang / Han, Jinsheng	A review on cement-based materials used in steel structures as fireproof coating	125623
Szymańska, Anna / Dutkiewicz, Michał / Maciejewski, Hieronim / Palacz, Magdalena	Simple and effective hydrophobic impregnation of concrete with functionalized polybutadienes	125624
Tang, Yuxiang / Chen, Hongniao / Xiao, Jianzhuang	Size effects on the characteristics of fracture process zone of plain concrete under three-point bending	125725
Mei, Kaiyuan / Zhang, Liwei / Wang, Yan / Cheng, Xiaowei / Xue, Quan / Gan, Manguang / Fu, Xiaojuan / Zhang, Chunmei / Li, Xiaochun	Structural evolution in micro-calcite bearing Ca-montmorillonite reinforced oilwell cement during CO2 invasion	125744
Dimou, Angeliki Eirini / Metaxa, Zoi S. / Kourkoulis, Stavros K. / Karatasios, Ioannis / Alexopoulos, Nikolaos D.	Tailoring the binder matrix of lime-based binders for restoration interventions with regard to mechanical compatibility	125717
Abu-Jdayil, Basim / Mourad, Abdel-Hamid I. / Hussain, Atif / Al Abdallah, Hyder	Thermal insulation and mechanical characteristics of polyester filled with date seed wastes	125805
Posani, Magda / Veiga, Rosário / De Freitas, Vasco Peixoto	Thermal mortar-based insulation solutions for historic walls: An extensive hygrothermal characterization of materials and systems	125640
Liu, Huai / Jing, Wu / Qin, Lingling / Duan, Ping / Zhang, Zuhua / Guo, Rui / Li, Wanlin	Thermal stability of geopolymer modified by different silicon source materials prepared from solid wastes	125709
Rojas Vega, Carlos / Pina, Juan Carlos / Bosco, Emanuela / Saavedra Flores, Erick I. / Guzmán, Carlos F. / Yanez, Sergio J.	Thermo-mechanical analysis of wood through an asymptotic homogenisation approach	125617
Gravina, Rebecca J. / Xie, Tianyu	Toward the development of sustainable concrete with Crumb Rubber: Design-oriented Models, Life-Cycle-Assessment and a site application	125565
Motwani, Prashant / Rather, Amer Iliyas / Laskar, Arghadeep	Transfer stage parameters for concrete beams prestressed with BFRP bars: Experimental and finite element studies	125639
Zhang, Wei / Deng, Mingke / Han, Yagang / Li, Ruizhe / Yang, Shuo	Uniaxial tensile performance of high ductile fiber-reinforced concrete with built-in basalt textile grids	125716
Wang, Xinpeng / Wu, Di / Hou, Dongshuai / Yu, Rui / Geng, Qihui / Wang, Pan / Wang, Muhan / Zhang, Chenming / Li, Liangwei / Li, Xue	The unification of light weight and ultra-high strength in LWC: A new homogeneity enhancement approach	125647
Mabrouk, Gamal M. / Elbagalati, Omar S. / Dessouky, Samer / Fuentes, Luis / Walubita, Lubinda F.	Using ANN modeling for pavement layer moduli backcalculation as a function of traffic speed deflections	125736
Deng, Ziming	Utilization of lithium nitrate to mitigate alkali–silica reaction of architectural glass mortar: Characteristics and mechanisms	125433
Pasandín, A. R. / Nardi, E. / Pérez-Barge, N. / Toraldo, E.	Valorisation of lignin-rich industrial byproduct into half-warm mix reclaimed asphalt with enhanced performance	125770
Ayat, Amira / Bouzerd, Hamoudi / Ali-Boucetta, Tahar / Navarro, Antonia / Benmalek, Mohamed Larbi	Valorisation of waste glass powder and brick dust in air-lime mortars for restoration of historical buildings: Case study theatre of Skikda (Northern Algeria)	125681
Gautam, Lilesh / Kumar Jain, Jinendra / Jain, Abhishek / Kalla, Pawan	Valorization of bone-china ceramic powder waste along with granite waste in self-compacting concrete	125730
Wang, Xingang / Li, Yujie / Zhang, Chenyang / Zhang, Xuanzhe	Visualization and quantification of self-healing behaviors of microcracks in cement-based materials incorporating fluorescence-labeled self-healing microcapsules	125668

About this
data sheet
IssueID
60019
Published on:
30/11/2021
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - January 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - January 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.