Construction and Building Materials - Januar 2022

Erschienen:	Januar 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Ghanbari-Ghazijahani, Tohid / Kasebahadi, Mohammad / Hassanli, Reza / Classen, Martin	3D printed honeycomb cellular beams made of composite materials (plastic and timber)	125541
Zhang, Jianwei / Tao, Xinyi / Li, Xiangyu / Zhang, Yunyi / Liu, Yujun	Analytical and experimental investigation of the bond behavior of confined high-strength recycled aggregate concrete	125636
Wang, Gaofei / Wei, Yang / Miao, Kunting / Zheng, Kaiqi / Dong, Fenghui	Axial compressive behavior of seawater sea-sand coral aggregate concrete-filled circular FRP-steel composite tube columns	125737
Guo, Yong-Chang / Xiao, Shu-Hua / Zeng, Jun-Jie / Su, Jia-Ying / Li, Tian-Zi / Xie, Zhi-hong	Behavior of concrete-filled FRP tube columns internally reinforced with FRP-steel composite bars under axial compression	125714
Zhang, Wenxue / Lu, Xiangtao / Fang, Rong / Zhao, Xu	Calculation model including time-varying coefficients for calculating the lateral pressure of bottom-up pumping self-compacting concrete	125672
Ramezani, Mahyar / Dehghani, Ayoub / Sherif, Muhammad M.	Carbon nanotube reinforced cementitious composites: A comprehensive review	125100
Qian, Kuangliang / Song, Yufeng / Lai, Junying / Qian, Xiaoqian / Zhang, Zhe / Liang, Yong / Ruan, Shaoqin	Characterization of historical mortar from ancient city walls of Xindeng in Fuyang, China	125780
Wang, Chuan / Li, Zhaofeng / Zhou, Zhihao / Gao, Yifan / Zhang, Jian	Compatibility of different fibres with red mud-based geopolymer grouts	125742
Khan, Mohammad Iqbal / Fares, Galal / Abbas, Yassir M.	Cost-performance balance and new image analysis technique for ultra-high performance hybrid nano-based fiber-reinforced concrete	125753
Jeong, Jaehoon / Underwood, B. Shane / Kim, Y. Richard	Cracking performance predictions using index-volumetrics relationships with direct tension cyclic fatigue test and Illinois Flexibility Index Test (I-FIT)	125631
Dash, Swayam Siddha / Chandrappa, Anush K. / Sahoo, Umesh Chandra	Design and performance of cold mix asphalt – A review	125687
Zhang, Jun / Bao, Liangliang	Determination of asphalt mixture’s viscoelastic constitutive parameters for pavement response analysis using dynamic modulus transformation	125729
Sánchez Díaz, Eric Enrique / Escobar Barrios, Vladimir A.	Development and use of geopolymers for energy conversion: An overview	125774
Tsaousi, Georgia-Maria / Sakkas, Konstantinos-Miltiadis / Panias, Dimitrios	Development of advanced materials from industrial waste, with high thermal performance	125779
Wang, Sijia / Guo, Xiaolu / Guo, Zhenwen / He, Changxuan / Duan, Xinzhi / Hu, Wenpei / Zhuang, Kailin	Direct characterization of steel fibre corrosion in pre-cracked ultra-high performance concrete (UHPC) with different crack widths	125769
Feng, Baozhu / Wang, Haoyu / Li, Song / Ji, Kuo / Li, Liding / Xiong, Rui	The durability of asphalt mixture with the action of salt erosion: A review	125749
Velardo, P. / Sáez del Bosque, I. F. / Sánchez de Rojas, M. I. / De Belie, N. / Medina, C.	Durability of concrete bearing polymer-treated mixed recycled aggregate	125781
Uwizeyimana, Placide / Perrin, Marianne / Laügt, Emmanuel / Eyma, Florent	Durability study of glulam timber under cyclic moisture loading	125715
Akça, Kutalmış Recep / Ipek, Metin	Effect of different fiber combinations and optimisation of an ultra-high performance concrete (UHPC) mix applicable in structural elements	125777
Xue, Jiangwei / Liu, Songhui / Ma, Xiaoe / Teng, Yibiao / Guan, Xuemao	Effect of different gypsum dosage on the chloride binding properties of C4AF hydrated paste	125562
Ma, Lei / Zhang, Qing / Jia, Zijian / Liu, Chao / Deng, Zhicong / Zhang, Yamei	Effect of drying environment on mechanical properties, internal RH and pore structure of 3D printed concrete	125731
Sun, Jianing / Kong, Kian Hau / Lye, Chao Qun / Quek, Ser Tong	Effect of ground granulated blast furnace slag on cement hydration and autogenous healing of concrete	125365
Cao, Feng / Qiao, Hongxia / Li, Yuanke / Shu, Xiuyuan / Cui, Lijun	Effect of highland barley straw ash admixture on properties and microstructure of concrete	125802
Alfaqawi, Rami M. / Fareed, Ayyaz / Bilal Ahmed Zaidi, Syed / Airey, Gordon D. / Rahim, Abdur	Effect of hydrated lime and other mineral fillers on stiffening and oxidative ageing in bitumen mastic	125789
Teng, Yibiao / Liu, Songhui / Zhang, Zhaocai / Xue, Jiangwei / Guan, Xuemao	Effect of triethanolamine on the chloride binding capacity of cement paste with a high volume of fly ash	125612
Abduljabbar, Nadia / Al-Busaltan, Shakir / Dulaimi, Anmar / Al-Yasari, Rand / Sadique, Monower / Nageim, Hassan Al	The effect of waste low-density polyethylene on the mechanical properties of thin asphalt overlay	125722
Kumar, Nitin / Barbato, Michele	Effects of sugarcane bagasse fibers on the properties of compressed and stabilized earth blocks	125552
Wang, Mingzhi / Yang, Xu / Wang, Wei	Establishing a 3D aggregates database from X-ray CT scans of bulk concrete	125740
Thakur, Ankush / Senthil, Kasilingam / Singh, Amrit Pal	Evaluation of concrete bricks with crumb rubber and polypropylene fibres under impact loading	125752
Trabacchin, Giulia / Sebastian, Wendel / Zhang, Mingzhong	Experimental and analytical study of bond between basalt FRP bars and geopolymer concrete	125461
Zhang, Zhiqiang / Zhu, Xingyu / Zhang, Yanyang / Gong, Ruikai	Experimental and numerical investigation on flexural and fracture performance of steel fiber reinforced shotcrete	125645
Basser, Hamed / Moradi Shaghaghi, Taleb / Afshin, Hasan / Saleh Ahari, Reza / Mirrezaei, Seyed Saeed	An experimental investigation and response surface methodology-based modeling for predicting and optimizing the rheological and mechanical properties of self-compacting concrete containing steel fiber and PET	125370
Zou, Jinhua / Du, Tengfu / Chen, Wei / Fang, Chengfeng / Zhang, Shijian / Zou, Chao / Huang, Longtian / Chen, Haibin	Experimental study of concrete floating slab municipal road with steel spring isolators under vehicle loads	125686
Qiu, Huafu / Zhang, Fushun / Liu, Lang / Huan, Chao / Hou, Dongzhuang / Kang, Wei	Experimental study on acoustic emission characteristics of cemented rock-tailings backfill	125278
Chen, Lihua / Zhou, Lujie / Wang, Chenggang / Dong, Lijuan	Experimental study on bond-slip constitutive relationship between checkered c-shaped encased steel plate and concrete	125059
Chen, Xinyi / Li, Jinxing / Essawy, Hisham / Pizzi, Antonio / Fredon, Emmanuel / Gerardin, Christine / Du, Guanben / Zhou, Xiaojian	Flame-retardant and thermally-insulating tannin and soybean protein isolate (SPI) based foams for potential applications in building materials	125711
Meskini, Sarra / Remmal, Toufik / Ejjaouani, Houssine / Samdi, Azzedine	Formulation and optimization of a phosphogypsum – fly ash – lime composite for road construction: A statistical mixture design approach	125786
Minafò, Giovanni / Oddo, Maria Concetta / La Mendola, Lidia	Formulation of a truss element for modelling the tensile response of FRCM strips	125576
Zhang, Yanrong / Zhang, Xuesong / Cai, Xiaopei / Gao, Liang / Li, Qiangqiang / Kong, Xiangming	A further understanding on the strength development of cement pastes in the presence of triisopropanolamine used in CRTS III slab track	125743
Wu, Haiying / Lei, Honggang / Chen, Y. Frank	Grey relational analysis of static tensile properties of structural steel subjected to urban industrial atmospheric corrosion and accelerated corrosion	125706
Guo, Rui / Xian, Guijun / Li, Feng / Li, Chenggao / Hong, Bin	Hygrothermal resistance of pultruded carbon, glass and carbon/glass hybrid fiber reinforced epoxy composites	125710
Ali Emadi, Amir / Modarres, Amir	The impact of water to cement ratio on the fracture behavior of rubberized concrete	125754
Adeleke, Blessing Oluwaseun / Kinuthia, John M. / Oti, Jonathan E.	Impacts of MgO waste:GGBS formulations on the performance of a stabilised natural high sulphate bearing soil	125745
Jiang, Yi / Shen, Peiliang / Poon, Chi Sun	Improving the bonding capacity of recycled concrete aggregate by creating a reactive shell with aqueous carbonation	125733
Kong, Xiao / Dai, Li / Wang, Yitan / Qiao, Dehao / Hou, Shaodan / Wang, Shaojie	Influence of kenaf stalk on printability and performance of 3D printed industrial tailings based geopolymer	125787
Fang, Xin / Wang, Chao / Li, Heng / Wang, Xiaohua / Zhang, Sherong / Luo, Xiaochun / Jia, He	Influence of mesoscopic pore characteristics on the splitting-tensile strength of cellular concrete through deep-learning based image segmentation	125335
Nedeljković, Marija / Mylonas, Akis / Wiktor, Virginie / Schlangen, Erik / Visser, Jeanette	Influence of sand drying and mixing sequence on the performance of mortars with fine recycled concrete aggregates	125750
Gao, Zhen / Zhang, Peng / Wang, Juan / Wang, Kexun / Zhang, Tianhang	Interfacial properties of geopolymer mortar and concrete substrate: Effect of polyvinyl alcohol fiber and nano-SiO2 contents	125735
Yang, Huifang / Dong, Ruikun	Investigating the properties of rejuvenated asphalt with the modified rejuvenator prepared by waste cooking oil and waste tire crumb rubber	125692
Liu, Jian / Peng, Yun / Xu, Shenchun / Yuan, Pengcheng / Qu, Kefo / Yu, Xiao / Hu, Feng / Zhang, Wei / Su, Yu	Investigation of geopolymer-based ultra-high performance concrete slabs against contact explosions	125727
Li, Heng / Xu, Fang / Li, Bin / Sun, Tao / Huang, Xiaoming / Zhu, Jing / Peng, Chao / Lin, Juntao / Chen, Zongwu	Investigation on mechanical properties of excess-sulfate phosphogypsum slag cement: From experiments to molecular dynamics simulation	125685
Zhao, Xiaorui / Sheng, Yanping / Lv, Hongli / Jia, Haichuan / Liu, Qinlong / Ji, Xin / Xiong, Rui / Meng, Jiandang	Laboratory investigation on road performances of asphalt mixtures using steel slag and granite as aggregate	125655
Zhou, Xinxing / Zhang, Xiaorui / Zhang, Yuan / Adhikari, Sanjeev	Life cycle assessment of asphalt and cement pavements: Comparative cases in Shanxi Province	125738
Lakhiar, Muhammad Tahir / Bai, Yu / Wong, Leong Sing / Chandra Paul, Suvash / Anggraini, Vivi / Kong, Sih Ying	Mechanical and durability properties of epoxy mortar incorporating coal bottom ash as filler	125677
Kadhim, Sarah / Cevik, Abdulkadir / Niş, Anıl / Bakbak, Derya / Aljanabi, Maysam	Mechanical behavior of fiber reinforced slag-based geopolymer mortars incorporating artificial lightweight aggregate exposed to elevated temperatures	125766
Ling, Senlin / Hu, Mingjun / Sun, Daquan / Ni, Hangtian / Xu, Lei	Mechanical properties of pouring semi-flexible pavement material and engineering estimation on contribution of each phase	125782
Liu, Xin / Qian, Xiaoxu / Pu, Shikun / Sheng, Ke / Sun, Dongning / Hong, Baoning	Methods for testing the quality of lightweight cellular concrete during pouring	125755
Chen, Keyu / Wu, Dazhi / Zhang, Zilong / Pan, Chonggen / Shen, Xinyuan / Xia, Linling / Zang, Jiawei	Modeling and optimization of fly ash–slag-based geopolymer using response surface method and its application in soft soil stabilization	125723
Lv, Nao / Wang, Haibo / Rong, Kai / Chen, Zhanyang / Zong, Qi	The numerical simulation of large diameter split Hopkinson pressure bar and Hopkinson bundle bar of concrete based on mesoscopic model	125728
Chen, Xiao / Zhang, Jiachen / Guo, Wenbin / Zhou, Mingkai / Zhao, Qinglin / Li, Beixing	Occurrence and migration laws of water in circulating fluidized bed bottom slag mortar and their influences on mortar properties	125748
Yin, Yuanyuan / Han, Sen / Kong, Haiyu / Han, Xiao / Guo, Han	Optimization and performance evaluation of waterborne epoxy resin modified emulsified asphalt micro-surfacing based on tunnel driving environment	125604
Gleaton, Jason / Lai, Zhengshou / Xiao, Rui / Zhang, Ke / Chen, Qiushi / Zheng, Yi	Optimization of mechanical strength of biocemented Martian regolith simulant soil columns	125741
Binti Joohari, Ilya / Giustozzi, Filippo	Oscillatory shear rheometry of hybrid polymer-modified bitumen using multiple stress creep and recovery and linear amplitude sweep tests	125791
Yao, Tengfei / Han, Sen / Gong, Xin / Zhang, Jianchao / Chang, Xiaojuan / Zhang, Zhuang	Performance evaluation of a polyurethane-urea binder for asphalt pavement groove-filling	125734
Strieder, Helena Lunkes / Dutra, Vanessa Fátima Pasa / Graeff, Angela Gaio / Núñez, Washington Peres / Merten, Felipe Raul Meert	Performance evaluation of pervious concrete pavements with recycled concrete aggregate	125384
Li, Mingqi / Chen, Huisu / Liu, Lin / Lin, Jianjun / Ullah, Karim	Permeability of concrete considering the synergetic effect of crack’s shape- and size-polydispersities on the percolation	125684
Xu, Liangliang / Duan, Yu / Li, Yulong	Porosity, gradient and impact velocity effects on compressive response of foamed concrete	125616
Zahedi, Farshad / Dehestani, Mehdi	Post-fire optimum mechanical properties of self-compacting mortar using Taguchi method and analysis of variance	125642
He, Ziming / Shen, Aiqin / Wu, Hansong / Wang, Wenzhen / Wang, Lusheng / Guo, Yinchuan	Properties and mechanisms of brick-concrete recycled aggregate strengthened by compound modification treatment	125678
Ban Cheah, Chee / Liew, Jia Jia / Khaw Le Ping, Kevin / Siddique, Rafat / Tangchirapat, Weerachart	Properties of ternary blended cement containing ground granulated blast furnace slag and ground coal bottom ash	125249
Okuyucu, Osman / Jayawickrama, Priyantha / Senadheera, Sanjaya	The relationship between curing regime and mechanical properties of controlled low-strength material	125460
Caniato, M. / Gasparella, A. / Bettarello, F. / Santoni, A. / Fausti, P. / Granzotto, N. / Bécot, F. X. / Chevillotte, F. / Jaouen, L. / Borello, G. / Robin, O. / Atalla, N.	A reliability study concerning the acoustic simulations of timber elements for buildings	125765
Dai, Jinpeng / Wang, Qicai / Bi, Ruixiao / Wang, Chong / Han, Zhuowei / Du, Wentao / Chen, Ziyu	Research on influencing factors and time-varying model of thermal conductivity of concrete at early age	125638
Duan, Yun / Wang, Qicai / Yang, Zijiang / Cui, Xiaoning / Liu, Fei / Chen, Hai	Research on the effect of steam curing temperature and duration on the strength of manufactured sand concrete and strength estimation model considering thermal damage	125531
Shi, Xiaoshuang / Zhang, Cong / Wang, Xiaoqi / Zhang, Tao / Wang, Qingyuan	Response surface methodology for multi-objective optimization of fly ash-GGBS based geopolymer mortar	125644
Ma, Xiaomeng / Pan, Jinlong / Cai, Jingming / Zhang, Zhuoyang / Han, Jinsheng	A review on cement-based materials used in steel structures as fireproof coating	125623
Szymańska, Anna / Dutkiewicz, Michał / Maciejewski, Hieronim / Palacz, Magdalena	Simple and effective hydrophobic impregnation of concrete with functionalized polybutadienes	125624
Tang, Yuxiang / Chen, Hongniao / Xiao, Jianzhuang	Size effects on the characteristics of fracture process zone of plain concrete under three-point bending	125725
Mei, Kaiyuan / Zhang, Liwei / Wang, Yan / Cheng, Xiaowei / Xue, Quan / Gan, Manguang / Fu, Xiaojuan / Zhang, Chunmei / Li, Xiaochun	Structural evolution in micro-calcite bearing Ca-montmorillonite reinforced oilwell cement during CO2 invasion	125744
Dimou, Angeliki Eirini / Metaxa, Zoi S. / Kourkoulis, Stavros K. / Karatasios, Ioannis / Alexopoulos, Nikolaos D.	Tailoring the binder matrix of lime-based binders for restoration interventions with regard to mechanical compatibility	125717
Abu-Jdayil, Basim / Mourad, Abdel-Hamid I. / Hussain, Atif / Al Abdallah, Hyder	Thermal insulation and mechanical characteristics of polyester filled with date seed wastes	125805
Posani, Magda / Veiga, Rosário / De Freitas, Vasco Peixoto	Thermal mortar-based insulation solutions for historic walls: An extensive hygrothermal characterization of materials and systems	125640
Liu, Huai / Jing, Wu / Qin, Lingling / Duan, Ping / Zhang, Zuhua / Guo, Rui / Li, Wanlin	Thermal stability of geopolymer modified by different silicon source materials prepared from solid wastes	125709
Rojas Vega, Carlos / Pina, Juan Carlos / Bosco, Emanuela / Saavedra Flores, Erick I. / Guzmán, Carlos F. / Yanez, Sergio J.	Thermo-mechanical analysis of wood through an asymptotic homogenisation approach	125617
Gravina, Rebecca J. / Xie, Tianyu	Toward the development of sustainable concrete with Crumb Rubber: Design-oriented Models, Life-Cycle-Assessment and a site application	125565
Motwani, Prashant / Rather, Amer Iliyas / Laskar, Arghadeep	Transfer stage parameters for concrete beams prestressed with BFRP bars: Experimental and finite element studies	125639
Zhang, Wei / Deng, Mingke / Han, Yagang / Li, Ruizhe / Yang, Shuo	Uniaxial tensile performance of high ductile fiber-reinforced concrete with built-in basalt textile grids	125716
Wang, Xinpeng / Wu, Di / Hou, Dongshuai / Yu, Rui / Geng, Qihui / Wang, Pan / Wang, Muhan / Zhang, Chenming / Li, Liangwei / Li, Xue	The unification of light weight and ultra-high strength in LWC: A new homogeneity enhancement approach	125647
Mabrouk, Gamal M. / Elbagalati, Omar S. / Dessouky, Samer / Fuentes, Luis / Walubita, Lubinda F.	Using ANN modeling for pavement layer moduli backcalculation as a function of traffic speed deflections	125736
Deng, Ziming	Utilization of lithium nitrate to mitigate alkali–silica reaction of architectural glass mortar: Characteristics and mechanisms	125433
Pasandín, A. R. / Nardi, E. / Pérez-Barge, N. / Toraldo, E.	Valorisation of lignin-rich industrial byproduct into half-warm mix reclaimed asphalt with enhanced performance	125770
Ayat, Amira / Bouzerd, Hamoudi / Ali-Boucetta, Tahar / Navarro, Antonia / Benmalek, Mohamed Larbi	Valorisation of waste glass powder and brick dust in air-lime mortars for restoration of historical buildings: Case study theatre of Skikda (Northern Algeria)	125681
Gautam, Lilesh / Kumar Jain, Jinendra / Jain, Abhishek / Kalla, Pawan	Valorization of bone-china ceramic powder waste along with granite waste in self-compacting concrete	125730
Wang, Xingang / Li, Yujie / Zhang, Chenyang / Zhang, Xuanzhe	Visualization and quantification of self-healing behaviors of microcracks in cement-based materials incorporating fluorescence-labeled self-healing microcapsules	125668

Über diese
Datenseite
IssueID
60019
Veröffentlicht am:
30.11.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Januar 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Januar 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.